vertical band saw used for sale

Max. cutting length: 4,500 mm Max. saw blade diameter: 550 mm Automatic length positioning and angle adjustment via program control Motorized adjustment for swivelling on both sawing units, allowing angles between 45 and 90 degrees to be directly controlled New network-compatible control system in 2019 Minimum quantity spraying device Weight: approx. 2200 kg

Panel return system for single-sided edging machine in left-hand version with a length of approx. 12m50 Panel length 240 to 2700 mm Panel width 60 to 1000 mm Panel thickness 8 to 80 mm Min/max panel dimensions with 4-sided machining: 240 x 80 mm, 2500 x 1000 mm Working height 950 mm At the machine outlet is a tilting air table that returns the workpieces on a conveyor belt to the machine operator Tilting air table with dimensions 2500 x 1400 mm Air table at the front of the machine inlet with dimensions 720 x 580 mm Brush cleaning of the return belt air table at the end of the return conveyor with dimensions 2500 x 1250 mm

Code: 0221 Brand: CENTAURO Model: CO 700 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames , doors, plastics, aluminum, composite materials and various - CE Standard Technical data: Diameter of flywheels mm 700 Width of flywheels mm 40 Max cutting height mm 435 Height of worktable from ground mm 940 Min/max blade length 5040/5180 Motor power Hp 4 Diameter of suction mouth mm 100 Tilting table Overall dimensions: mm 1350 x 800 x 2300 h Weight kg 400

Saw pulley diameter: 914 mm (34 ) Saw pulley width: 90 mm (3,5 ) Max. sawblade width: 90 mm (3,5 ) Sawblade length: 5384 to 5587 mm Max. cutting height under the guide: 406 mm Max. opening feed rolls to sawline: 228 mm. Max. opening fence to sawline: 228 mm. Main saw motor: 15 kW Feedmotor: 1,1 kW Tabel height from floor level (with pit): 812 mm Total height from floor level: 2184 mm.

Edge banding machine Type: EDGETEQ S-300 Manufacturer: Homag Year: 2020 Machine in good condition, fully functional, under power Find more here - / Contact us at -

Complete with 2 different band saws Dewalt. Auction-ID: A3-43515-664

Round materials: approx. 260–320 mm; square material: approx. 250–300 mm; infinitely adjustable cutting speed; Hydraulic lowering control Auction-ID: A1-43332-5

Equipped with: digital control panel, emergency stop, second line conveyor, tape thickness 0.5-3, 3x collection tray, anti-adhesive adhesion spray unit Auction-ID: A1-41993-6

Motor power: 5kW. Auction-ID: A1-45979-123

Wheel diameter: 790mm Auction-ID: A1-45979-104

Serial Number: 220.06.018.18 Power: 15.0 kW Voltage: 400 V / 3-Phase / 50 Hz Current: 28.0 A Operating Hours: Approx. 695 h (very low) Control System: Smartouch CNC – x-motion Plus Machine Code: 3676 Min. Air Pressure: 7 bar Technical Specifications Processing height: 8–60 mm ABS edge band thickness (roll material): 0.4–3 mm Capability to glue thick edges up to 6 mm All units can be pneumatically activated/deactivated via touchscreen Drive & Motor Configuration 2 × 1.1 kW jointing cutters (12,000 rpm) 0.75 kW feed motor (10 m/min) 2 × 0.75 kW trimming motors (12,000 rpm) Processing Units 2 × Pre-milling units (1.1 kW) Glue unit (EVA & PUR capable, reversible roller, Teflon-coated glue pot for granulate) Pressure unit with three pressure rollers Cutting unit End trimmi ...

Banding / Banding Machine ATS Tanner Type US 2000 AB With ultrasonic tape welding, suitable for plastic and paper tape with a width of 30 mm. Powerful, proven technology. Strip tension infinitely adjustable via potention meter/rotary regulator. Offer price 3000,- EUR EXW or 3,500 EUR incl. packaging & shipping with transport insurance.

Additional title: Roboband / Logomatic, Capacity: 150 paletts / h, Power: 5,5 kW, Current: 10 A, Voltage: 400 Volt, Frequency: 50 Hz, Weight: 1700 kg

Edge banding machine Type: F2 Manufacturer: Hebrock Year: 2011 Pre-milling Unit: 2 diamond tools for a perfectly clean edge without tear-out. Thanks to powerful motors, it easily handles edging of plywood and blockboard. 1 set of pre-milling cutters is installed, plus 1 completely new spare set. Glue Unit: Top glue pot with fast heating, approx. 3.5 minutes. We used exclusively Dorus K351 glue, which causes only minimal build-up in the glue pot and ensures a perfect glue line, especially on white and light-colored decors. Pressure Rollers: 3 rollers, with the first one rubber-coated and with increased pressure for complete adhesion and strong bonding of the edge to the panel. End Trimming Saw: Precise trimming of edge ends. Milling Unit: Multifunction cutters for R1, R2 radius rounding or 45° chamfer milling of the top and bottom edge. Surface Scrapers: For removing gl ...

Manufacturer: Riepe Model: Polisher Year of Manufacture: 2015 Electrical Data - Voltage: 380 V / 50 Hz - Dimensions and Weight - Dimensions (L x W x H): approx. 1013 x 1104 x 1070 mm - Weight: approx. 190 kg Technical Specifications - Through-feed edge polishing machine for high-gloss finish - Transport via roller conveyor - 3 polishing discs arranged at 45 degrees: 1. Hard wax application (first disc) 2. Removal of excess wax 3. High-gloss finish - Manual wax feed (hard wax stick) - Height adjustment for different workpiece sizes - Each polishing disc individually adjustable horizontally and vertically - Quick-change polishing discs Find more here - / Contact us at -

Pre-milling unit: yes; Pre-milling unit material removal: 0 - 2 mm; plastic edges: 0,4 - 3 mm; solid wood edges: 0,5 - 5 mm; Workpiece thickness: 8 - 50 mm; Minimum length of workpiece: 120 mm; Min. work piece width: 110 mm; Anti-adhesive spraying unit: yes; Edge preheating device: yes / with ceramic infrared lamp; Bonding unit: granulat / Glue container quick-change kit; Jack knife: yes; Flush trimming unit: yes; Corner copy unit: yes; Flush radius milling unit: yes; Radius scraper unit: yes; Area scraper unit: yes; Buffing unit: yes; Cleaning spray unit: yes; motor power: 5 kW; machine length: 3774mm; machine width: 1546 mm; machine height: 1337mm; weight: 842 kg; Top equipment for high productivity with low space requirements! Intuitive operation with the eye-S control and 10 large touchscreen: - HMI Maestro Active Edge - Graphic display of all processing units ...

Cyklop CI-89 2002

band width:1050 mm plate thickness:8 mm number of rolls:8 DECOILER:. - design : single coil :. - sheet width max:1050 mm - sheet width (min):150 mm - max. weight of coil:22 to - max. diameter of coil:2000 mm - min. internal diameter of coil:570 mm FEEDERS:. - feeder: type : roll feeder :. - sheet width max:1050 mm - sheet thickness max:150 mm LEVELER UNIT:. - sheet width max:1050 mm - sheet width (min):150 mm - sheet thickness max:8 mm - sheet thickness (min):2.5 mm - number of leveler rolls:8 - diameter of leveler rolls:96 mm - distance between leveler rolls:104 mm - diameter of feed rolls:160 mm - feed velocity min.:2 m/min - feed velocity max.:43.5 m/min ELECTRICAL SPECIFICATIONS:. - mains voltage:400 V - mains frequency:50 Hz Technical description : Sheet metal unrolling and straightening system for thick sheet metal up to 8 mm, consisting of: - LAWECO COIL LOA ...

band width:2000 mm plate thickness:1.8 mm number of rolls:13 Controls:SIEMENS DECOILER:. - design : single coil :. - sheet width max:2000 mm - sheet width (min):400 mm - max. weight of coil:30 to - max. diameter of coil:2000 mm - min. internal diameter of coil:610 mm FEEDERS:. - sheet width max:2000 mm - sheet thickness max:2 mm - feeding step max.:4000 mm LEVELER UNIT:. - sheet width max:2000 mm - sheet width (min):400 mm - sheet thickness max:1.8 mm - sheet thickness (min):0.6 mm - number of leveler rolls:13 - diameter of leveler rolls:50 mm

Contour edge banding & trimming machine Make: VITAP Type: SMART-3 New machine - With swivable trimming station - For straight and formed workpieces (convex and concave) - 1 glue spreading roller for 10-60 mm panel thickness - Guillotine to cut bands up to 3 mm thickness - edge 0,5-3mm 2 tape feeding speed (3 m/min or 7 m/min) -Glue pot 1kg capacity - Tape plate Ø=520mm Solid Phenolic table - Easy to clean - With no heat transmission - Electronic temperature control - Foot pedal command for the guillotine Tilting trimming unit - with 1 high frequency motor HP 0.75 (kw0,55) - 1 cutter Head with 2 knives r1mm/r2mm/r3mm - Support tape plate Ø 600 mm - Semi-automatic end-cutter with motor 0,5 kw and blade Ø=125 mm - Working table 400 x 300 mm. - CE standards. Optional available for an extra charge: - Cutter (without knives) - Set ...

Used single-sided edge banding machine Brand: Homag Type: Profi KAL 330/ 9/A6/L Year of manufacture: 2011 Feed speed Infinitely adjustable 18-25 m/min Release agent spray unit top/bottom - To reduce surface contamination. Jointing unit KAL300/S2 - 2 motors, each 3 kW, Hz 9000 1/min - Motor shaft Ø 30x68 mm, KN - Electropneumatic control of both motors for joint milling. - Automatic adjustment of the joint milling cutter to the center of the workpiece. Melting unit with granulate container - Granulate container 12L - Level control of the melting quantity Lasertec activation unit standard - The gluing unit is designed so that it can be used with either EVA/PU adhesive or LaserTec. - Manual conversion from LaserTec to PU/EVA Magazine 1 roll - For solid edges, strip goods, and roll goods - Automatic strip separation via vacuum suction cup - 1 edge f ...

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

VERTICAL PANEL SAW type HOLZHER 1255 second hand machine volt. 380/50 max. working length mm.5300 max. working heigth mm.2200 CE mark : Yes

Qty. 1 Second-hand vertical saw Mfc.: COSEN Type: SVT-6070H Built: 2015 Capacity Height 600 mm (23.6") Capacity Throat 700 mm (27.69") Cutting Length 1250 mm (49.2")) Blade Speed: 20-80 m/min (65-262 ft/min) Blade Size (LxWxT): 6040x54x1.6 (237.8"x2"x0.06")

The Sulak PTS325F is a powerful vertical saw designed for cutting laminated glass and other specialty glass types. Here are the key specifications and features: Technical Specifications Maximum glass thickness : up to 60 mm Cutting types : o Normal glass o Laminated glass o Fire-resistant glass o Bulletproof glass o Cutting angle : o Straight cut (90°) o Fixed angle of 45° via simple mechanical switching o Cutting direction : Vertical from top to bottom o Cutting speed : Adjustable via frequency converter ( 0.1 – 1.6 m/min ) o Cooling system : Closed circuit with tank, water pump, nozzles and collection system Dimensions : approx. 3650 × 1900 × 4600 mm o Power supply : 3×400 V (or 3×230 V), 50/60 Hz o Power : 3.3 kW o Weight : approx. 1110 kg o Noise level : 78 dB o Saw blade diameter : 350 mm or 400 mm Maximum cutting lengt ...

Serial Number: 7880-10 Weight: 2,5 tons Power: 6 kW Air pressure: 6 bar Length mm: 5000 Width mm: 1000 Height mm: 3500 Working height: 70 cm. Transport size L x W x H: 5,0 x 1,0 x 3,5 + 1,1 x 0,8 x 1,35 Maximum speed: 1,6m/min. Min.-max. glass thickness: 50 mm Condition machine : Good Control type: Manually/ semi automatic Electric. Connection: 400 V Documentation: No Instructions: No Electric diagram: No Photos en video available

Complete sawmilling line composed by Hydraulic Carriage, logs turning, cross-cutter and sharpening machine.

Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...

1 used ACM STAR 700 Vertical Bandsaw New in 2015, as is where is Including Transportdevice

Manufacturer: Harwi, Type: Piranha 1550, Year: 2015, Cutting lenght mm: 3300, Cutting depth mm: 1550, Working hight mm: 55, Saw Blade Diameter mm: 250, Main engine kW: 3, Wight approx. kg: 485, Year :2015

Cutting length: 2200 mm Cutting height: 30 mm automatic: nein ja/nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Band saw CENTAURO SP600 AVAILABLE FROM JANUARY 2026

Code: 0343 Brand: PUTSCH MENICONI Model: SVP 950-M - CE Standard Manual vertical panel saw for carpentry workshops, for vertical and horizontal cutting of panels, semi-finished products, furniture, doors, window frames, plastics and composite materials - CE Standard Technical data: Cutting length 5300 mm Cutting height 2200 mm Max cutting thickness 80 mm Motor power 7,5 Hp Blade diameter 300 mm Blade speed 5000 rpm Automatic electric sliding table to prevent damage to the support strips during horizontal cuts Small parts support device Liftable castor device for panel sliding Overall dimensions of assembled machine: mm 6500 x 1500 x 3000 h Overall dimensions for transport: Frame mm 6500 x 600 x 2350 h - Weight kg 590 + Column mm 3100 x 1130 x 1150 h - Weight kg 600

Code: 0295 Brand: PUTSCH MENICONI Model: SVP 620 - CE Standard Manual vertical panel saw - CE Standard Cutting lenght mm 4200 Cutting height mm 2200 Cutting depth mm 45 Motor power Hp 3 Blade diameter mm 250 Device for cutting of short pieces Overall dimensions: Mounted machine mm 5400 x 1500 x 2950 h Weight kg 900

CENTAURO cast iron band saw model CL800: - with 800mm solid flywheels - Motor KW 5.5 / HP 7.5, Volt 380 - Tilting table up to 20° - upper and lower blade guide Year 1998, machine according to CE standards AVAILABILITY FROM JUNE 2026

Vertical panel saw HOLZ-HER 1270 Automatic built in 1987, machine no. 262/8-75, machine width approx. 500x210h cm

- Total installed power 9 KW. - Cutting length approx. 2500 mm. - Maximum cutting width approx. 2200 mm. - Maximum cutting depth 50 mm. - Maximum postforming cutting depth 42 mm. - Main disc unit: 300 mm disc diameter, 5.50 KW-04900 rpm motor. - Scoring disc unit: disc diameter 125 mm, motor 0.55 KW-05600 rpm. - Postforming disc unit: 300 mm disc diameter, 1.10 KW-04800 rpm motor. - Saw carriage: feed speed 12 m/min. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-70

For cutting in vertical and horizontal position Heavy duty machine with a welded steel frame Automatic folding chassis for avoiding contact of the PVC slats with the saw, during horizontal cutting. Underlying support in aluminum with folding rollers for easier movement of panels. Manual movement of the pressure bar and carriage for vertical and horizontal cuts. The latter are mounted with 6 points on the batti. Adjustable cutting depth Automatic folding chassis : electric. Support 4680 mm divided into 2 parts for use of small panels 4 mechanical stops for horizontal cuts 2 stops for vertical cuts Extra stop for vertical cuts Device for repetitive horizontal cuts Folding rollers Brake motor Maximum cutting length: 5300mm Max vertical height: 2200mm Max horizontal height: 2100mm Max cutting depth: 80mm Power of Motor: 5.5kW Saw blade diameter: 300mm Saw blade speed: 5000r/min

Sawing machine only Automatic table Saw grinding function Auction-ID: A3-43519-2189

Panel sizing saw, vertical Brand: Putsch Type: SVP 420 M New machine Description: The SVP 420 M is a vertical panel saw practical for cutting panels vertically and horizontally. The saw frame is completely welded and has an attachment grate for the workpieces, consisting of aluminum strips and plastic inserts. The automatic grate movement ensures that the saw blade does not hit the contact strips in the case of horizontal cuts. The lower workpiece supports consist of aluminum soles and plastic supports. For simple movement of the workpieces, the machine is equipped with retractable transport rollers. The saw beam and saw carriage can be moved and adjusted by hand, the saw beam can be fixed at 5 vertical sawing positions. The comfortable entry and exit of the saw head is ensured by an ergonomically shaped handle. Standard features: - electrically driven, automatic shift gate ...

Vertical panel saw Brand: Putsch Type: SVP 950 M New machine Description: The SVP 950 M is a vertical saw for cutting panels in vertical and horizontal direction. The frame of the saw is completely welded and it has a working table for the workpieces which consists of aluminium fences with plastic inserts. To prevent a contact with the saw blade while doing horizontal cuts, the frame is equipped with an automatic moving support. The lower workpiece supports consist of aluminium and have lowerable transport rolls. The saw beam and the saw unit can be adjusted and moved manually. Therefore the saw beam can be fixed at 6 vertical sawing positions. The simple shift of the saw head is possible because of an ergocnomical formed handle. Standard equipment: - Electric driven, automatic moving support - Swivable central support for small workpieces (length approx. 4680 mm) - 4 gr ...

Vertical panel-sizing saw Brand: Putsch Type: SVP 145 M New machine Description: The SVP 145 M is a vertical panel saw for cutting panels in vertical and horizontal direction. The frame of the saw is completely welded and has a support grid for the workpieces to be processed, consisting of aluminium strips and plastic inserts. The automatic grid displacement ensures that the saw blade does not hit the support bars during horizontal cuts. The lower workpiece supports consist of aluminium soles and plastic inserts. For the easy movement of the workpieces, the machine is equipped with retractable transport rollers. The saw beam and the saw carriage can be moved and adjusted by hand, the saw beam can be fixed in 5 vertical sawing positions for this purpose. The comfortable insertion and removal of the saw head is ensured by an ergonomically shaped handle. Standard equipment: - El ...

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload Manufacturer: Modula Year of Make: 2021 Model: Modula Lift ML 50D Height: ...

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload Manufacturer: Modula Year of Make: 2013 Model: Modula Lift ML 50D Height: ...

Cutting width approx. 700 mm Cutting height approx. 150 mm Saw blade diameter 500 mm Engine power approx. 4.0 kW hydraulic saw blade stroke

cutting width 700 mm cutting height 150 mm saw blade diameter 500 mm motor power about 4.0 kW hydraulic Saw stroke

Crosscut and miter saws with maximum cutting height of 200 mm stable grey cast iron construction precise ball bushing guide of the tool slide on hardened and ground steel shafts Manual saw feed fast up to 65 ° horizontal MITRE setting and 60 ° vertical for adjustable fixed stops lower blade guard to extractor can be connected Machine mounted on mobile machine base with 1,5 mtr. long rollers left and right left side with scale and stop position slider Technical data: Engine: 400 V / 5.0 kW Speed: 2800 RPM Cutting length: 420 mm (at 90 °) Cutting height: 200 mm (at 90 °) Miter range horizontal: 45°-90° - 20 ° Miter range vertical: 60° - 90°-30° Saw blade diameter: 520 mm Dust nozzle: 100 mm Weight: 490 kg

(with hydraulical width changer, year 2004) Cuting width 760 mm uting high 710 mm Stroke 500 mm With hydraulical width changer, year 2004 Log feeding, outfeed splitter guide. Clamping and auxiliary carriages. Top Machine in best contition