vertical baler used for sale

This 5-axis FAMU ACTIVE FIVE 3000 was manufactured in 2010. It features extensive travels of 3000 × 1200 × 900. Notably, the electrospindle and Z axis components were replaced in March 2025, and the X axis components in 2024, ensuring enhanced reliability and performance. If you are looking to get high-quality milling capabilities consider the FAMU ACTIVE FIVE 3000 machine we have for sale. Contact us for more information about this machine.

A CNC vertical machining center is offered. Travel X/Y/Z: 1000mm/500mm/570mm, table dimensions X/Y: 1200mm/500mm, max. workpiece weight: 800kg, distance from spindle nose to table: approx. 120-690mm, tool holder: SK40, max. spindle speed: 10000rpm, tool magazine: 24, max. tool diameter: approx. 80mm, max. tool length: approx. 300mm, max. tool weight: approx. 7kg, rapid traverse X/Y: 24m/min, rapid traverse Z: 20m/min, positioning accuracy: approx. 8-12µm, control: Heidenhain TNC 620. Machine dimensions X/Y/Z: approx. 2700mm/2550mm/2770mm, machine weight: approx. 5100kg. Inspection possible by appointment.

This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2008. It features a Siemens 840D control unit, a spindle speed of 10,000 rpm, and a tool changer with 20 positions. The machine offers a table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information.

x-travel: 1100 mm y-travel: 600 mm z-travel: 510 mm Table dimensions: 1300 x 600 mm table load: 1,0 t tool taper: ISO 40 DIN 69871A spindle turning speed range: 60 - 12000 U/min rapid traverse: 32 m/min power capacity: 10 / 17 kW no. of tools in the magazine: 32 Stück tool length - max.: 300 mm Tool diameter: 76 / 127 mm weight of tools max.: 8 kg tool changing time: 2,5 sec total power requirement: 30 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4400 x 2250 x 2920 mm Machine with only 3.275 spindle running hours ! Heidenhain iTNC 530 CNC control 32-station ATC Internal coolant system: 20 bar Coolant tank: 480 l Chip conveyor Heidenhain glass scales in X/Y/Z Oil-cooler The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It features a Siemens 840D control unit, a spindle speed of 10,000 rpm, and a tool changer with 20 positions. The table measures 790 x 560 mm with a maximum load of 600 kg. Rapid traverse rate is 30 m/min. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V vertical machining centre. Contact us for more information about this machine.

Control Siemens Sinumerik 828D Travel X/Y/Z: 1020 x 560 x 510 mm Spindle speed 8000 min-1 Tool magazine for 24 Wkzg. SK 40 IKZ Chip conveyor

This 3-axis KNUTH XMILL 640 was manufactured in 2015. It features a Siemens 828 control, a spindle speed of 8,000 rpm, and a BT40 spindle taper. The table size is 750 × 360 mm, and it includes an 18-tool changer. If you are looking to get high-quality milling capabilities, consider the KNUTH XMILL 640 machine we have for sale. Contact us for more information.

3-Axis vertical machine center manufactured in 2015, the ROMI D600 features a Siemens 828D CNC control system, enhancing precision and ease of use. Its spindle speed reaches up to 8,000 rpm with an ISO-40 taper, and a tool capacity of 20, supporting efficient operation. The worktable measures 840 x 500 mm, handling a maximum weight of 800 kg. Ideal for demanding tasks, it also includes a chip conveyor for hassle-free maintenance. Consider the ROMI D600 machine we have for sale for reliable and robust machining solutions. Contact us for more details.

x-travel: 1350 mm y-travel: 560 mm z-travel: 510 mm Control: Heidenhain iTNC 530 total power requirement: 13 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Eikon VMC 1000 was manufactured in 2000. It features a 10,000 RPM spindle, a 20-tool changer, and X/Y/Z travels of 1000mm, 500mm, and 400mm respectively. Equipped with a Selca 3045 control system, consider the opportunity to buy this Eikon VMC 1000 vertical machining centre. Contact us for more information.

The machine is in good technical condition; it can be tested by prior arrangement.

This 3-axis ZPS MCFV 125 EZ was manufactured in 1999. It features a Selca S3045 control system, a spindle speed of 3,000 rpm, and a tool changer with a capacity of 15 tools. The table size is 1,300 × 600 mm, and it includes a gearbox for gear changes. Consider the opportunity to buy this ZPS MCFV 125 EZ vertical machining centre. Contact us for more information.

vertical machining center, year 2004, CNC TNC 530. Used machine. More info & price on IndustrialBuyer.

This 3-axis POSmill E1100 was manufactured in 2011. It features a Heidenhain iTNC350 CNC control, a robust 1,100 mm X-axis travel, and a high-capacity 40-position automatic tool changer. The spindle supports speeds up to 10,000 rpm with ISO 40 tool holder and cooling. Additional features include a full enclosure, safety windows, and a 20 bar coolant system with chip management. If you are looking to get high-quality milling capabilities consider the POSmill E1100 machine we have for sale. Contact us for more information.

This 3-axis DECKEL DMC 104V linear vertical machining center was manufactured in 2007. It features a Heidenhain iTNC 530 control system, a spindle with a maximum speed of 18,000 rpm, and a tool holder type HSK 63. The machine offers X/Y/Z travels of 1020/600/500 mm and a rapid traverse rate of 70 m/min. Consider the opportunity to buy this DECKEL DMC 104V linear vertical machining center. Contact us for more information about this machine.

vertical machining center, year 2015, CNC 0i-MD. Used machine. More info & price on IndustrialBuyer.

This 3-axis EMCO MILL E350 was manufactured in 2019, featuring advanced Siemens control for precise operations. Ideal for complex milling tasks, this vertical machining center ensures reliable performance. Consider the opportunity to buy this EMCO MILL E350 vertical machining center. Contact us for more information.

DÖRRIES SCHARMANN VCE 3000 / 280 CNC Vertikaldrehmaschine Modernisierung: im Rahmen des Retrofits im Jahr 2014 auf Siemens SINUMERIK 840D SL Arbeitsbereich Tischdurchmesser: 2.800 mm Max. Umlaufdurchmesser / Drehdurchmesser: 3.000 mm Max. Tischbelastung: 25.000 kg Max. Drehhöhe: ca. 2.100 mm Verfahrweg X-Achse: ±1.550 mm Verfahrweg Z-Achse / RAM-Hub: 1.500 mm Hauptantrieb und Spindeln Hauptantrieb: Siemens-Hauptmotor Antriebsleistung: 130 kW Max. Spindeldrehzahl: 4.500 min⁻¹ Betriebsart: S6, 40 % Ausstattung: 2 vertikale Spindeln Werkzeugwechsler und Peripherie o    2 automatische Werkzeugwechsler o    Kühlschmierstoffanlage o    Späneförderer o    Ölnebelabsaugung o    2 separate Hydraulikaggregate Betriebsstunden: ca. 12.571 Stunden laut mechanischem Betriebsstundenzähler

This 5-axis DECKEL MAHO DMP60S was manufactured in 2004, featuring a vertical machining center with X 760 mm, Y 460 mm, and Z 560 mm travels. It includes a NC rotary axis, NC swivel milling head, and a tool magazine with 60 positions for HSK-A 63. Additional features include an internal coolant supply, chip conveyor, and a paper belt filter system. Consider the opportunity to buy this DECKEL MAHO DMP60S vertical machining center. Contact us for more information about this machine.

This 5-axis DECKEL MAHO DMU 50 T was manufactured in 2000, featuring a Heidenhain TNC 430 M control system and a manual swivel rotary table for versatile 5-axis machining. It has a spindle speed up to 8,000 rpm, tool holder SK 40, and rapid traverse rates of 12 m/min in X/Y/Z. If you are looking to get high quality milling capabilities consider the DECKEL MAHO DMU 50 T machine we have for sale. Contact us for more information.

A complete turning system consisting of two identical EMAG vertical turning machines together with the associated peripheral equipment and automation is available. Main spindles: 2, Speed: 6500rpm, Tool stations: 2x12, X/Z-axis travel: 840mm/425mm, Robot type: M-6iB, Loading stations: 2, Workpiece carriers: 24, Weight: approx. 8000kg, Power-on hours 1/2: 51170h/53006h, Feed/Machining time 1/2: 33418h/30961h, Automatic operation hours 1/2: 14858h/14709h. Both machines are equipped with chip conveyors, 2x tool turrets, 2x loading stations, a workpiece palletizing system, robot automation and coolant system. Documentation available. An on-site inspection is possible.

This 3-axis MIKRON VCP 800W Duro was manufactured in 2004. It features a Heidenhain iTNC 530 control system, with X, Y, Z travels of 800 mm, 650 mm, and 500 mm respectively. The machine includes a high-velocity spindle capable of 20,000 rpm and a 30-position tool magazine. Ideal for precision machining, consider the opportunity to buy this MIKRON VCP 800W Duro vertical machining centre. Contact us for more information about this machine.

A complete turning system consisting of two identical EMAG vertical turning machines together with the associated peripheral equipment and automation is available. Main spindles: 2, Speed: 6500rpm, Tool stations: 2x12, X/Z travel: 840mm/425mm, Robot type: M-6iB, Loading stations: 2, Workpiece carriers: 24, Weight: approx. 8000kg, Power-on hours 1/2: 42668h/42411h, Feed/Machining time 1/2: 29058h/27736h, Automatic operation hours 1/2: 10354h/12404h. Both machines are equipped with chip conveyors, 2 tool turrets, 2 loading stations, a workpiece palletizing system, robot automation and cooling. Documentation available. An on-site inspection is possible.

This 3s MORI SEIKI SV-50s was manufactured in 1997. The CNC milling machine is in good working condition and has been used only a few times for prototype work. It features a FANUC spindle with a speed of 10,000 rpm and a tool changer with 30 positions. Consider the opportunity to buy this MORI SEIKI SV-50 vertical machining centre. Contact us for further details.

Control Winmax Travel X/Y/Z: 1,067 x 610 x 610 mm Spindle speed 12,000 min-1 Tool magazine for 30 Wkz., SK 40 IKZ Chip conveyor Detachable handwheel

This 3-axis Dugard 850VMC was manufactured in 2007. It features a maximum spindle speed of 8,000 rpm and an impressive X/Y/Z travel of 850 x 520 x 510 mm. The machine includes a robust table size of 1000 x 510 mm. If you are looking to get high-quality machining capabilities, consider the Dugard 850VMC vertical machining centre we have for sale. Contact us for further details.

Year of construction: 2015 CNC controller: Heidenhain TNC 640 Axes X-axis travel mm: 850 Y-axis travel mm: 520 Z-axis travel mm: 475 Feed rates m/min: 42 Rapid traverse m/min: 42 Acceleration in the axes m/s2: 5 Worktable Table dimensions mm: 1100x570 Maximum workpiece size (D x H) mm: H=800mm Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 14000 Spindle drive power kW: 20,3/14,5 (40/100%ED) Cooling Cooling through the Spindle Center bar: 20 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 20 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5.7 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Direct measuring system  ...

This 3-axis GEHRING 630-1 LR vertical honing machine was manufactured in 2017. It features a HAINBUCH sleeve with a diameter of 65 mm, VDI40 tool holders, and a hydraulic holder for reduction bushing. Ideal for precision honing applications. Contact us for more information about this machine.

A vertical EMAG CNC turning machine is available. Turning diameter: 400mm, swing diameter: 420mm, X/Z-axis travel: 850mm/315mm, spindle bearing diameter: 140mm, spindle speed: 4000rpm, rapid traverse X/Z: 45m/min/30m/min, feed force: 11kN, machine dimensions X/Y/Z: approx. 9500mm/4500mm/3000mm, weight: approx. 9000kg. Including hard turning function, dry machining function and chip conveyor. Documentation available. An on-site inspection is possible.

x-travel: 760 mm y-travel: 510 mm z-travel: 610 mm table surface area: 1.020 x 510 mm control: WINMAX spindle turning speed range: 12.000 U/min spindle drive: 13,5 kW : 24 St. tool adaptor: SK 40 | | internal coolant system feed: 20 bar feed: m/min rapid traverse: 35/35/30 m/min total power requirement: kW weight of the machine ca.: 5,0 t dimensions of the machine ca.: m used vertical machinig centre with 4th axis - 4th axis - Dual toolchanger - internal coolant with filter - spindle oil cooling - electric hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details.

Control Winmax Travel X/Y/Z: 1270 x 660 x 610 mm Spindle speed 10,000 min-1 Tool magazine for 24 Wkz., SK 40 IKZ 20 bar Pocket milling machines with islands Synchronous threading

The machine is in good technical condition, after prior agreement it is possible to test it. It has a modified system to TNC640, touch screen. Without tools and without water management,

Key data: 700 mm, 250 mm, 350 mm

Beautiful Rambaudi V2 XYZ= 700x250x350 The stroke of the upper ram is 400 mm Table dimensions 1070x300mm Quill with R8 cone Feeds and rapids on X Rapids on Z Feed up/down on the quill Spindle speed 65 to 4750 Head can turn Automatic Bird Lubricator DRO on 3 axes Some tools

For sale is a Rovema flow-wrapping machine for packaging coffee in the weight range 500 g to 1,000 g. The machine is fully functional and has an integrated aroma valve system for coffee bags with a freshness valve. Technical features: Suitable for 500–1,000 g of coffee Integrated valve system Robust, durable construction Ideal for pre-ground coffee or beans Extensive spare parts package included The machine comes from German quality production – solid, reliable technology ("good old workmanship"). A visit or demonstration is possible by arrangement.

Control Heidenhain iTNC 520 Travel X/Y/Z: 1200 x 900 x 500 mm Spindle speed 16,000 min-1 Tool magazine for 30 Wkz. + additional magazine for 57 Wkz. HSK-A 63 IKZ 40 bar Chip conveyor Measuring Probe Heidenhain Blum Laser System

x-travel: 760 mm y-travel: 550 mm z-travel: 300 mm Control: RMS6V3.15 tool change unit: 25-fach tool taper: HSK E40 turning speeds: 42.000 U/min table-size: 860 x 550 mm table load: 800 kg total power requirement: 14 kW weight of the machine ca.: 5200 kg dimensions of the machine ca.: 2,5 x 2,1 x 2,55 m 3-axis high-speed machining centre, Roeders RFM760, year of manufacture 2000, installation in 2001 Key specifications: Roeders RFM760 high-speed machining centre with accessories (tool holders, tool shrink-fitter, etc.). The machine is fully operational, well-maintained, serviced and powered up (battery maintenance). • Spindle: Newly fitted in December 2022, in use until March 2023 – Estimated running time approx. 75 hours (de-registered by the company in March 2023) • Control system: Röders, software: RMS6V3.15 (211) • Operating system: Windows NT • Complete sys ...

CNC Vertical Machining Center "BRIDGEPORT VMC 800" With track control Heidenhain TNC 410 Year of Make: 2000 Travels: X 800 Y 500 Z 500 Speed range: 0 – 10,000 rpm infinitely variable With the following accessories: Rigid angle table 1000 mm x 500 mm clamping surface Vertical tool changer with 20 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant device with reinforced pump 20 bar Chip conveyor Operating instructions

This 5-axis C.B. Ferrari A152 was manufactured in 2009. It features an X-axis travel of 850 mm, Y-axis travel of 420 mm, and Z-axis travel of 420 mm. The machine has a table working area of 1720 x 525 mm and a main spindle speed of 16,000 RPM. If you are looking to get high-quality machining capabilities, consider the C.B. Ferrari A152 vertical machining centre we have for sale. Contact us for further details.

x-travel: 600 mm y-travel: 400 mm z-travel: 510 mm table-size: 800 x 400 mm Control: HEIDENHAIN iTNC 530 spindle turning speed - stepless: 12.000 U/min feed speeds - directly programable: 30.000 mm/min tool taper: ISO40 tool magazin:: 20 total power requirement: 25 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: LTH 3,5 x 2,1 x 2,95 m Control unit operating time: 32,790 hours. Spindle operating time: 10,310 hours. Includes Heidenhain electric handwheel. Includes electric touch probe. Includes internal coolant supply. Includes chip conveyor. Includes Gressel Gripos machine vise. Includes USB port. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis FADAL 4020 FX vertical machining centre was manufactured in 2007. It features an impressive X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 508 mm. The machine includes a robust table size of 1,219 x 508 mm and a maximum table load of 1,652 kg. If you are looking to get high-quality machining capabilities, consider the FADAL 4020 FX machine we have for sale. Contact us for further details.

cutting diameter: 320 mm saw band length: 3400 x 27 x 0.9 mm capacity 90 degrees: flat: 320 x 400 mm capacity 45 degrees: flat: LI 320 x 280 mm capacity 45 degrees: flat: RE 320 x 260 mm capacity 60 degrees: flat: RE 320 x 140 mm band speed: 35 + 70 m/min work height max.: 930 mm voltage: 400 V total power requirement: 2.67 kW weight: 950 + 250 kg range L-W-H: - mm well-maintained condition () current new price incl. accessories ~ 40.000 Euro special price on request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=AHgMDxAcpgE Equipment: - electro-hydraulic vertical mitre bandsaw - with large cutting range and small footprint - Robust material support table - miter cuts are carried out fully automatically electro-hydraulic miter adjustment left right - Up to 99 cutting programs - Central operation of all machine functions from the front - Loading also possible ...

This 3-axis Hurco VMX 42 was manufactured in 2007. It features an X-axis travel of 1,060 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 1,270 × 610 mm and a maximum table load of 1,100 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42 vertical machining centre we have for sale. Contact us for further details.

roll diameter: 420 mm throat: 405 mm workpiece height: 380 mm cutting speed: 16 - 2200 m/min table surface area: 615 x 615 mm saw band length: 3450/3650x6-20x0,9 mm work height max.: 955 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 470 kg dimensions of the machine ca.: 1250 x 1000 x 2100 mm From a training workshop Good condition () Features: - Robust, vertical band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL belt welding system, with shears and grinding motor - Swivel table 15°/45° - Machine base - Swiveling machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 gebr. DMG DMU 50 M machining centre, built in 2001 X-axis travel: approx. 500 mm Y-axis travel: approx. 400 mm Z-axis travel: approx. 400 mm Table diameter approx. 630 mm T-slots 6 pieces B-axis can be swivelled manually (-5° to +95°) C-axis manually rotatable 360° Max. workpiece weight approx. 200 kg Tool holder SK40 (DIN 69871) Speed range up to approx. 8,000 rpm Spindle power approx. 7.5 – 10 kW Torque approx. 40 – 60 Nm Control: HH 124 Weight approx. 3.8 t.

ID3738 Witte Bohrtechnik VSB500-200 year/Baujahr 1991 Trailer-mounted well drilling rig, Hatz engine, 2 hydraulic pumps, direct rotary head, with flushing pump (auxiliary pump) – with Hatz engine, previously drilled to a depth of 60 m – 160/170 mm Trailer well drill, Hatz engine, 2 hydr. Pumps, direct rotary head, with mud pump (auxiliary pump) - with Hatz motor, drilled with it so far: 60 m depth - 160/170 mm

This 3-axis DN SOLUTIONS PUMA V8300MR vertical turning machine was manufactured in 2023. As new, showroom model. It features a maximum turning diameter of 830 mm and a turning length of 690 mm. The machine is equipped with a powerful spindle offering 2,592 Nm of torque and a rapid traverse of 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA V8300MR machine we have for sale. Contact us for further details.

roll diameter: 420 mm throat: 400 mm workpiece height: 285 mm cutting speed: 15 - 1400 m/min table surface area: 500 x 500 mm saw band length: 3200-3400x6-20x0,9 mm work height max.: 955 mm voltage: 380 V total power requirement: 1.5 kW weight of the machine ca.: 470 kg dimensions of the machine ca.: 950 x 750 x 1820 mm Furnishing: - robust, vertical - band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL strip welding machine model BSO, with shears and grinding motor - swiveling table 15°/45° - Machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis DAEWOO ACE V 600 was manufactured in 1997. It features an impressive X-axis travel of 1,260 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine includes a robust table size of 1,400 x 700 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the DAEWOO ACE V 600 vertical machining centre we have for sale. Contact us for further details.

control: FIDIA PCN 775 : . x-travel: 1000 mm y-travel: 620 mm z-travel: 700 mm Axis: 5 Achsen simultan gesteuert weight: 12 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.