129,243 used machines on RESALE, but how to find them? Machine Search
The machine underwent a general overhaul in 2015 The following tasks were performed as part of the overhaul: repair of the electrical cabinet and hydraulics, scraping of the bed and table, replacement of bearings in the headstock, new springs for the axial bearings, new table piston rod and sleeves, installation of sludge separators. Documentation for the machine is available. Year of manufacture: 1980.
CNC Model: Mazatrol CNC Version: Fusion 640M Tool Attachment: ISO 40 Spindle power: 18.5Kw Number of spindle speeds: 12000 Number of tools: 30 X-axis travel: 760mm Y-axis travel: 410mm Z-axis travel: 510mm Fast feeds for linear axes X Y Z: 36m/min Table dimensions: 1000 x 410mm High refrigerant pressure: yes Chip conveyor: belt :::D DIMENSIONS AND WEIGHT::: Length: 2200mm Width: 2700mm Height: 2700mm Weight: 4920Kg
roll diameter: 520 mm throat: 520 mm workpiece height: 310 mm cutting speed: 25 - 500 m/min table surface area: 600 x 500 mm band length: 3.880 x 3-16 mm mm Table tiltable up to: 15° Grad work height max.: 1000 mm total power requirement: 1,5 kW weight of the machine ca.: 500 kg. dimensions of the machine ca.: 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm w ...
Rafamet KCFB-320 Vertical Boring Mill 125.98” Table Diameter, 137.79” Max. Turning Diameter, (2) Swiveling Ram Heads, 39.4” Ram Stroke, +/- 30 Degrees Ram Swivel, 98.4” Height Under Rail, 0.8-40 RPM Table Speeds, 55,000 Lbs. Table Capacity, Pendant Controls, 2-Axis Quadra Check Digital Readouts, Side Head, Threading & Taper Turning, 75 HP Table Motor, S/N 126240
Rafamet KCFB-320 Vertical Boring Mill 125.98” Table Diameter, 137.79” Max. Turning Diameter, (2) Swiveling Ram Heads, 39.4” Ram Stroke, +/- 30 Degrees Ram Swivel, 98.4” Height Under Rail, 0.8-40 RPM Table Speeds, 55,000 Lbs. Table Capacity, Pendant Controls, 2-Axis Quadra Check Digital Readouts, Side Head, Threading & Taper Turning, 75 HP Table Motor, S/N 126240
Lippert belt conveyor folding belt vertical switch diverter, distribution on 2 levels GF 3700-920-800 - NEW RA1985 Technical data: Conveyor length (NL): 1900 mm Belt body (NB): 920 mm Belt width (GuB): 800 mm Overall height (BH): 105 mm Belt height: 550 mm Basic dimensions: 3700x1500 mm, safety fence Total height: 2700 mm Tilt height difference: 900 mm Conveying speed (v m/s): 0.8m/s Lifting/lowering speed: 1s Drive: SEW geared motor with Movi-mot Electrical data: Conveyor belt motor: 50Hz V380-500, kW 0.55 / S1 Tilt motor: 50Hz V220/400, kW 1.1 / S1 Idler pulley (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Optionally available: Supports. Side guide on one side and on both sides Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2020 condition: new Conveying length in mm: 1900 Nominal / outside widt ...
V. Bandsäge, Fabr. Elektra Beckum, Type BAS 315/4 Year of Make: 1994 Projection 315 mm Saw blade length: 2240mm Voltage: 220V Cutting depth: 170mm Accessories: saw blades, length stop, angle adjustment for mitre cuts
Key data: 400 mm
gebr. V. Bandsäge Fabr. Bauer (with only about 50 operating hours) incl. welding device for the saw blades Saw blade rollers diameter 400 mm Saw blade length 3000 mm Table size 520 x 470 mm Dimensions: 600 x 700 x 1800 mm Weight approx. 280 kg
1 Pc Used Single Column Carousel Lathe Make STANKO Mod. 1514 Bauj. 1988 Face plate diameter 1400 mm Circumferential diameter 1600 mm Turning height 1000 mm Workpiece weight 8 t Face plate speed range 3Stages 1 - 355 rpm Main drive motor 55 kW Machine weight approx. 25 t CNC SIEMENS SINUMERIK 810T 1 pc. used two-stand vertical lathe Brand STANKO Mod. 1514 year of construction 1988 Face plate diameter 1400 mm Swing diameter 1600 mm Turning height 1000 mm Workpiece weight 8 t Face plate speed range 1 - 355 rpm Main drive motor 55 kW Machine weight approx. 25 t CNC SIEMENS SINUMERIK 810 T
Saw blade length 3450 - 3640 mm Cutting height max. 325 mm Projection/cutting width 405 mm Table size 615 x 615 mm With saw blade welder Ideal BS0/16 with band shears and whetstone Angle-adjustable machine table Cutting speed 16 - 2200 m/min Very neat condition
Carnaghi Ø 1700 mm CNC Chuck dia.: 1600 mm Max turningdia -- passage: 1700 mm Max hight of workpiece Z-axis: 1000 mm Command: E.C.S CNC 2600 Turret: yes Qty Tools: 7 Coolant pump: yes
Properties: Volume 10500 L Material V2A (AISI 304) 1.4301 Vertical design Total height 5000 mm Diameter width 1800 mm Surface marbled on the outside Number of feet 4 Last Use Food Description: Tank topstock: Clapper bottom Crane eyelets Cylinder: Level indicator without scale in plastic Threaded nozzle DN 60 and disc valve DN 60 Manhole 300 x 400 mm Tasting tap Ladder hooks Tank underbody: Clapper bottom forward-drawn residual drain pipe with disc valve DN 60 4 feet
Type: XCEEDER 900/RT Een hoogwaardig multitasking bewerkingscentrum met 5 geïnterpoleerde assen. Ontworpen voor de hoogste prestaties bij het bewerken van 3D-vormen die draaien, frezen, boren en slijpen vereisen. Speciaal afgestemd op toepassingen variërend van complexe tandwielen en waaiers tot mallen, matrijzen en gereedschappen, voor projecten in de lucht- en ruimtevaart, automotive en energieopwekking. maximale werkstukdiameter: 900 mm A-as: -30° / 110° C-as: continu: 100 RPM maximale afstand tussen spindel en tafel: 700 mm Opties gemonteerd op de machine: 1 - hogesnelheidsspindel van 40.000 tpm 2 - tafel met diameter 700 mm 3 - gereedschapswisselaar met 150 posities 4 - spaantransportband 5 - koelsysteem met recuperatie 6 - temperatuurregeling voor koelmiddel 7 - hoge druk koeling (40 tot 70 bar) door spindel 8 - rookafzuigsysteem 9 - chipverzamelbox 10 - Voorinstelling syste ...
x-travel: 1.020 mm y-travel: 510 mm z-travel: 560 mm CNC-control: Sinumerik 828 D SIEMENS table-size: 1200 x 500 mm max. table load: 500 kg spindle taper: SK 40 spindle turning speed range: 12.000 U/min feed stepless: 10.000 mm/min rapid traverse: 36/36/36 m/min drive capacity - spindle motor: 9 kW tool change unit: 30 Pos. coolant: IKZ voltage: 400 V total power requirement: 40 kVA weight of the machine ca.: 5,5 t dimensions of the machine ca.: 2,90 x 2,10 x 2,65 m chip conveyor: 3,30 x 0,45 x 1,30 m coolant tank: 3,50 x 2,40 x 0,40 m - Serial-No.: 180308 - Machine ON: 5,555 h - Spindle ON: 3,318 h - Control system: SIEMENS Sinumerik 828 D - Electric handwheel - Chip conveyor - IKZ - Linear guides The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Carnaghi ABH 1550 - Ø1600 mm Chuck dia.: 1200 mm Max turningdia -- passage: 1400 mm Max hight of workpiece Z-axis: 1000 mm Command: E.C.S CNC 1400 TOOLING: yes Turret: yes Qty Tools: 7 Coolant pump: yes
A CNC 3-axis machining center Stama is available. Travel X/Y/Z: 1000mm/400mm/350mm, table dimensions X/Y: 1500mm/430mm, max. table load: 1200kg. Spindle power: 5.5kW, spindle taper: SK30, tool positions: 12, torque: 47Nm, spindle bearing diameter: 60mm, speed: 6000rpm. Positioning resolution: 0.001mm, positioning tolerance: +/-0.01mm, repeatability: 0.005mm, rapid traverse: 20m/min, feed rate: 5m/min. Drilling capacity (steel): 25mm, tapping capacity (steel): M24, milling capacity (steel) SK30/SK40/aluminum: 150cm³/180cm³/500cm³. Machine dimensions X/Y/Z: approx. 3200mm/2300mm/2500mm, weight: approx. 5500kg, control: Fanuc Series 0-M. Including C-axis and floppy disk drive. Without vises and tool holders (SK30). The cover of the Y-axis ball screw is missing. Documentation available. An on-site inspection is possible.
Band saw CENTAURO SP600 AVAILABLE FROM JANUARY 2026
max diam 1830 , table diameter 1600 , sinumeric 840 d . 2 x vertical
Travel column machining centre MAZAK VTC - 300C - II - 1740x760x660 mm, CNC, MAZATROL 640 M, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 2000x760 mm, Longitudinal travel x axis: 1740 mm, Cross travel y axis: 760 mm, Vertical travel z axis: 660 mm, Working feed x-y-z axes: 0 - 36.000 mm/1, Rapid feed x-y-z axes: 36 mt/1, Spindle taper type: 40 DIN-69871, Automatic tools change nr.: 30, Spindle speed: 0- 12.000 rpm, Spindle motor power: 18,5 Kw, Cnc: MAZATROL 640M, Approx net weight: 11.500 Kg, accessories: Chip conveyor, coolant tank, coolant thrugh spindle
Inv. Num. : 8729 Type: TC 215 Producer: Brother Generated: Parameters: Work table length: 500 mm Work table width: 220 mm Maximum table load (even): 75 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 300 mm Y-axis travel: 220 mm Travel Z-axis: 200 mm Number of all tools: 10 pieces Machine height: 1901 mm Machine length: 2430 mm Machine width: 1200 mm Machine weight: 1300 kg Equipment: Tool Holder
Freesrobot Staubli RX170HM Deze robot is voorzien van gaten om te frezen in mallen van banden, maar ook in andere zaken is dit mogelijk. Koeling door de spindel en de koelmelk is luchtgekoeld. Smering Gebeurde met vet. spindelopname: HSK E 32 Werd gebruikt in Tire Mold fabriek Mecamold Herstal. Max weight on the table: 300 kg Admission in spindle (ISO): HSK E 32 Power on the spindle: 8 kW Drilling-capacity: 80 mm Tapping-capacity: 80 mm Control : Fanuc Number of axes: 6 Toolchanger: nee Number of toolholders: nee Number of rotations: 500 - 20 000 rpm Power principal motor : 5 kW
Mitutoyo 570-313 Digital Height ruler
Brown & Sharp Tesa Hite 350 Digital Height Gauge 007.30041
Mitutoyo HDS-G24 Digimatic Height Gauge HDS
x-travel: 1040 mm y-travel: 510 mm z-travel: 640 mm control: Mazatrol type: M Plus Tool changer: 24 Pos. spindle taper: ISO: spindle turning speed range: U/min table surface area: mm Table load: kg spindle power: kW total power requirement: KVA weight of the machine ca.: 5,5 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ...
Travel path X/Y/Z: 1035mm/560mm/510mm, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, tool holder: SK40, tool stations: 20, spindle speed: 8000rpm, power: 13kW/9kW, torque: 83Nm/57Nm, feed rate: 20m/min, rapid traverse: 25m/min. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2600mm, weight: approx. 4500kg, control: Siemens Sinumerik 810D powerline, operating hours: 27241h. Including conveyor. Documentation available. An on-site inspection is possible.
Paletchanger 2 tafels Hoge druk koeling 15 bar Schroottransportband Maximale werkstukafmetingen: 3240 x 880 x 640 mm X-axis: 3000 mm Y-axis: 800 mm Z-axis: 585 mm Table dimensions: 3240 x 750 mm Max weight on the table: 3 ton Passage between uprights: 860 mm Admission in spindle (ISO): ISO 50 Power on the spindle: 30 kW Control : Mazatrol 640 Toolchanger: yes Number of toolholders: 40 positions Number of rotations: max 6000 rpm Number of pallets: (2x) 750 x 3240 mm Length: 3274 mm Depth: 8100 mm Height: 3546 mm Weight: 19 ton
Type: Ultrix 800 RT The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. When used for turning gt; vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm - hydraulic clamping on table - tool taper for turning: KM63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... gt; machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm - tool taper for milling: HSK-E40 - 150-position to ...
GENERAL Project No.: 905789 Quantity: 1 pcs. Manufacturer: BUDERUS Type: BDG 220 Control: Siemens 840 D solutionline Year of Make: 2020 Condition: Used machine Spindle Approx (hrs): 3000 Shifts machine one approx. (hour): rarely used DESCRIPTION GRINDING Max. workpiece diameter 440 mm Max. workpiece height 150 mm Travel in X 170 mm Max. rapid traverse speed in X/Z 30 m/min Max. feed speed in X 0.01-15 mm/min Max. speed workpiece spindle 1000 1/min OTHER EQUIPMENT Workpiece probes for measuring thickness deviation Gate sensor Splash protection cladding with fully encapsulated working area Automatic work room door Lighting in the work area Mechanical oil/emulsion mist extraction system Coolant device with paper belt filter High pressure pump 25 bar Mobile control unit for set-up operation with electronic handwheel Machine condition light Au ...
De TVM 302 ( meetbereik ~320 mm / ~12 inch) heeft de volgende typische specificaties: Meetbereik: 320 mm (12 inch) Maximaal toegestane fout: 0,02 mm Herhaalbaarheid (2 s): 0,005 mm Frontale vierkantheidsafwijking: 0,02 mm Resolutie: 0,01 mm / 0,001 mm (of in inches .0005/.00005) afhankelijk van het beeldscherm Meetkracht : ca. 3 N Maximale verplaatsingssnelheid van de handmatige wagen : 1500 mm/s. Gegevensuitvoer: Opto-RS232. laboaragon.com+1 Bedrijfstemperatuur : +10 °C tot +40 °C; Opslag: -10 °C tot +40 °C. Gewicht (gietijzeren voet): ~6 kg. 4 keer op voorraad
Year of construction: 2000 CNC controller: '3D contouring control Millplus Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) Feed rates m/min: 40 Rapid traverse m/min: 40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1000 Max. workpiece weight kg: 1000 max. torque Nm: 7900 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/cont) Cooling Tank capacity: 600 Tool system Tool holder: CAT 40 Tool magazine slots: 60 Tool changer: Doeble gripper Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Preapared for RENISHAW sonde Accuracy package Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 33831 Spindle Working: 6328 Rate ...
Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 T ...
Bridge type Machining Centre DMG DMC 100 V Hi-Dyn - 18.000 rpm - corse 1000x800x650 mm - CNC HEIDENHAIN i530, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1250x800 mm, Longitudinal travel x axis: 1000 mm, Cross travel y axis: 800 mm, Vertical travel z axis: 500 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 35.000 mm/1, Rapid feed x-y-z axes: 50.000 mm/1, Spindle taper type: 40-Din 69871, Automatic tools change nr.: 30, Spindle speed: 0- 18.000 rpm, Spindle motor power: 15 Kw, Cnc: HEIDENHAIN i530, Approx net weight: 00.000 Kg, Accessories: Chip conveyor
Year of construction: 2015 CNC controller: M-730UM Axes X-axis travel mm: 800 Y-axis travel mm: 530 Z-axis travel mm: 510 Distance spindle nose - table surface mm: 150-660 Feed rates m/min: 5 Rapid traverse m/min: 30 Worktable Number of pallets: 1 Table dimensions mm: 1100x600 Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 30/22 (25%ED/cont) Spindle torque Nm: 304 Tool system Tool holder: MAS-BT 50 Tool magazine slots: 30 With free neighboring places mm: 240 With occupied neighboring places mm: 120 Max. Tool Length mm: 350 Max tool weight kg: 20 Tool-to-tool time s: 2.34 Equipment Chip conveyor Internal cooling lubricant supply 4th axis DDRT-260X Custom Macro common variables (200) Machine running times Under power: 35896 Spindle Working: 26915 Rated power kVA: 52 Basic machine di ...
Introducing the FEHLMANN PICOMAX 90-M Machining Center, a versatile solution crafted for precision and efficiency in industrial settings. Equipped with the advanced HEIDENHAIN iTNC 530M CNC controller, this machine offers remarkable axis travel of 700mm (X), 420mm (Y), and 610mm (Z), with feed rates ranging from 1 to 20 m/min. The robust spindle operates at speeds from 50 to 20,000 rpm. The substantial worktable measures 1,260 x 490 mm, optimizing space and functionality. This 2007 model includes valuable features such as a 3D infrared measuring probe, coolant system, oil mist extraction, and HSC settings. A 32-slot tool magazine and a sophisticated laser tool measurement system further enhance operability. Presently available, this machine supports intricate and reliable machining processes with precision.
Introducing the DMG MORI M1-PRO, a high-performance machining center crafted in 2021 for precision and efficiency. Equipped with the SIEMENS 828D OP CNC controller, it offers impressive X, Y, and Z-axis travels of 550 mm each, complemented by a rapid traverse speed of 24 m/min. The powerful spindle delivers speeds of up to 12,000 rpm, with a drive power of 13/9 kW and torque of 83/57 Nm. Its robust worktable, measuring 850x650 mm, supports a maximum workpiece weight of 600 kg. Additional equipment includes an electronic handwheel, chip conveyor, mist collector, coolant gun, and RENISHAW measuring probe. This machine, with 12,481 running hours, is in excellent condition and ready for deployment. Located and available for immediate acquisition.
Introducing the CNC Machining Center with FANUC Control System, designed for precision and efficiency in industrial applications. This machine features an extensive axis travel of 1700 mm (X-axis), 750 mm (Y-axis), and 700 mm (Z-axis), accommodating a wide variety of machining tasks. The robust spindle operates at 12,000 rpm, ensuring high-speed performance with a BT50 tool holder and a 24-slot tool magazine for versatility and reduced downtime. The large worktable supports complex operations, and the included 4th axis enhances multi-dimensional machining capabilities. This equipment is maintained in excellent condition, ready to meet the demands of modern manufacturing environments. Available now for immediate shipping to enhance your production facility.
CNC Vertical Machining Center DECKEL MAHO DMC 70 eVolution With track control Heidenhain iTNC 530 Year of Make: 2007 Travel: X 750 Y 600 Z 520 Speed range: 0 – 18000 rpm infinitely variable (SK 40) With the following accessories: 2-axis NC swivel rotary table 700 mm x 500 mm clamping surface 2-fold pallet changer Vertical tool changer with 92 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Electronic handwheel 3 D Probe Heidenhain TS 640 Tool measurement in the work area (BLUM Laser) Operating mode 3 + 4 IKZ 40 bar Rotoclear Conveyor Coolant Setup Swarf Spray Gun 4 Height Adjustable Machine Shoes Operating instructions
CNC Vertical Machining Center HERMLE C 650 U With track control Heidenhain TNC 640 Year of manufacture: 2018 Travel : X 1050 Y 900 Z 600 Speed range : 20 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: NC swivel rotary table Ø 900 mm x 750 mm ( T slots for SRT ) Vertical tool changer with 42 magazine positions IKZ 40 bar with paper belt filter Sealing air for scales Scraper belt conveyor Coolant Facility ́ Blow-off device Blowing air d.d. spindle center Manual Cab Door , Manual Cab Roof Polycarbonate Safety Lenses Electronic Heat Compensation Electronic handwheel BLUM Wz-bruch / - Measurement A 2 3 D Probe Heidenhain Chip rinsing gun Oil mist extraction Control cabinet cooling unit ( RITTAL) 4 Pieces Height Adjustable Machine Shoes
Inv. Num. : 8809 Type: V-30i Producer: Leadwell Created: 2012 Parameters: Control System: FANUC Series Oi-MD Switch-on hours: 32488 h Hours: 9273 h Work table length: 890 mm Work table width: 500 mm Maximum table load (even): 300 kg Maximum vertical spindle speed: 8000 1/min X-axis travel: 760 mm Y-axis travel: 410 mm Travel travel Z-axis: 610 mm Machine weight: 4500 kg
CNC vertical machining center Type: DNM 500 Manufacturer: Doosan Year: 2018 Spindle overhauled in 2023 Control: Siemens Sinumerik 828 D X: 1020 mm Y: 540 mm Z: 510 mm Spindle speed: 10000 rpm Spindle taper: BT 40 Table: 1200 x 540 mm Max table load: 800 kg Tool magazine 32 positions Machine dimensions: 3000 x 2550 x 2740 mm Machine weight: 6500 kg Tool probe Work probe Chip conveyor Tool holders Machine in good condition, under power. Find more here - / Contact us at -
CNC controller: Fanuc Series 18i Axes X-axis travel mm: 650 Y-axis travel mm: 500 Z-axis travel mm: 450 Rapid traverse m/min: 150-600 Feed rates m/min: 40 Rapid traverse m/min: 40 Worktable Table dimensions mm: 800x450 Maximum workpiece size (D x H) mm: 800 x 450 x 450 Max. workpiece weight kg: 400 Spindle Spindle speed rpm: 13000 Spindle drive power kW: 18/22 Spindle torque Nm: 95/117 Tool system Tool holder: ISO 40 Tool magazine slots: 20 With free neighboring places mm: 120 With occupied neighboring places mm: 114 Max. Tool Length mm: 300 Max tool weight kg: 8 Tool-to-tool time s: 1.3 Chip-to-chip time s: 4.5 Equipment High pressure pump Rated power kVA Basic machine dimensions / weight Length mm: 2315 Width mm: 2760 Height mm: 2805 Weight kg: 7300
Inv. Num. : 3901 Type: COMBI-U7 Producer: KIHEUNG Created: 2016 Parameters: Control system: HEIDENHAIN TNC 620 Switch-on hours: 2590 h Hours: 2389 h Work table length: 1800 mm Work table width: 700 mm Maximum table load (uniform): 3000 kg Number of axes: 3 pieces Tool magazine: 24 pieces Maximum vertical spindle speed: 4000 1/min X-axis travel: 1600 mm Y-axis travel: 750 mm Z-axis travel: 900 mm Cone: ISO 50 Motor power: 20/30 kW Working feed: 10000 mm/s Number of T-slots in the table: 5 pieces Machine weight: 13 t Equipment: Swivel head (90°) Swivel head cycles through the program 90 degrees horizontally or vertically to the left or right
x-travel: 1300 mm y-travel: 610 mm z-travel: 650 mm control: Siemens type: 828 D Shop Mill Tool changer: 24 Fach spindle taper: ISO: 40 SK spindle turning speed range: 8500 U/min table surface area: 1300x610 mm Table load: 1000 kg spindle power: 15 kW total power requirement: . KVA weight of the machine ca.: 8 t dimensions of the machine ca.: m Operating hours: 5000 Equipment: Internal coolant system, chip conveyor on the left, cleaning gun, signal light The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can ...
Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment.
Inv. Num. : 8848 Type: VX 15 Producer: HURON Created: 2016 Parameters: Control system: HEIDENHAIN TNC 620 Work table length: 1700 mm Work table width: 810 mm Maximum table load (uniform): 2000 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 1510 mm Y-axis travel: 810 mm Travel Z axis: 810 mm Cone: ISO 40 Number of all tools: 24 pieces Machine height: 4000 mm Machine length: 5400 mm Machine width: 3310 mm Machine weight: 14500 kg Equipment: Conveyor Central air cooling Washing gun Probe Blum Rulers
Vertical Shaft Horizontal Impact Crusher / Mill, With dosing feed hopper
maximum number of results exceeded
please refine your search
