vertical baler used for sale

Inv. Num. : 7681 Type: SABRE 1000 Producer: Cincinnati Milacron Generated: Parameters: Control system: HEIDENHAIN TNC 426CB X-axis travel: 1016 mm Y-axis travel: 508 mm Travel Z-axis: 558 mm

swing diameter:200 mm weight of the machine ca.:15 t Distance between tips:832,5 mm turning length:380 mm with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers

x-travel:800 mm y-travel:460 mm z-travel:510 mm total power requirement:20 kW weight of the machine ca.:8 t Vertical Processing Centre 20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough.

ID3337 Wassara Drilling equipment / Bohrausrüstung Drilling equipment (Wassara W150 water hammer), new price of the entire equipment approx. 50,000 euros Drilling equipment, (Wassara W150 water hammer), original price of all equipment approx. 50,000 euros

Control Ultimax 4 Travel X/Y/Z 760 x 510 x 610 mm Table size 1020 x 510 mm Speed 12,500 min-1 Tool magazine for 24 Wkz., SK 40

x-travel:560 mm y-travel:450 mm z-travel:450 mm table surface area:760 x 410 mm turning speed range:8.000 U/min total power requirement:20 kW Vertical Processing Centre

turning diameter:200 mm turning height:120 mm weight of the machine ca.:18 t Available from 01.08.2024

Inv. Num. : 4891 Type: VHC3-XTS Produzent: AXA Erzeugt: 2014 Parametern: Steuerungssystem: Heidenhain iTNC530 Einschaltstunden: 22010 h Betriebsstunden: 7118 h Arbeitstischlänge: 2200 mm Arbeitstischbreite: 700 mm Maximale Tischbelastung (gleichmäßig): 3000 kg Anzahl der Achsen: 5 Stücke Minimale Vertikalspindeldrehzahl: 20 1/min Maximale Vertikalspindeldrehzahl: 10000 1/min Verfahrwege X-Achse: 2600 mm Verfahrwege Y-Achse: 1000 mm Verfahrwege Z-Achse: 950 mm Kegel: SK40 Ausstattung: Achse C - integrierter NC-Drehtisch mit einem Durchmesser von 800 mm Achse B - Spindelneigung /- 100° Teiler zum Teilen des Arbeitsbereichs Sonde Schraubstock

Key data: 1050 mm, 530 mm, 510 mm

Inv. Num. : 7734 Type: VCS 530 Producer: MAZAK Created: 2015 Parameters: Control system: MAZATROL MATRIX 2 Work table length: 1300 mm Work table width: 550 mm Number of synchronized axes: 3 Maximum table load (uniform): 1200 kg Number of stacking positions: 30 Speed: 10-1000 1/min X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel (spindle and pinola): 510 mm Cone: ISO 40 IKZ: 15 bar Machine weight: 7700 kg Equipment: Tool probe Workpiece Probe Oil Mist Separator IKZ Oil mist extraction Number of pallets: 2

Inv. Num. : 7737 Type: Alpha-T14 iD Producer: FANUC Robodrill Created: 2004 Parameters: Control system: Fanuc series 16i-MB Switch-on hours: 23500 h Work table length: 750 mm Work table width: 380 mm Cone: BT30

Curved plate chain with attachable gripper material LFG and NFG as good as new, partly in original packaging Number and lengths see pictures Price per m

max. wheel diameter:180 mm max. module:7 hob turning speeds:200-2000 U/min min. number of teeth:4 excluding conveyor belt

turning diameter:250 mm swing diameter:260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools!

turning diameter:250 mm swing diameter:260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools!

Carousel milling machine 1 shaft for BERMAQ cats mod. C.T.C. - CE - used - Drilling unit - spindle moulder - matr. 02010 - year 2002

x-travel: 800 mm y-travel: 700 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: 10,5 t dimensions of the machine ca.: 4,6 x 2,4 x 2,7 m Brand Deckel Maho Machine no F631 Type DMC 80 U hi-dyn CNC Brand Siemens CNC Type 840D Year of make 2003 Table length 800 mm Table width 630 mm Number of pallets 2 X 800 mm Y 700 mm Z 600 mm Spindle taper HSK-A 100 Tool changer 60 Maximum pallet load 800 kg Nutrition 20 - 1500 mm/min Chip transport Machine size 4.600 x 2.400 x 2.700 mm Machine weight 10.500 kg Tool magazine positions: 60 Heidenhain TS 642 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm Control: Siemens 840D total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,4 x 2,4 x 2,8 m Brand DMG Mori Seiki Machine no F666 Type DMC 635 V Ecoline Control Siemens 840D Year of make 2012 Table length 790 mm Table width 560 mm X 635 mm Y 510 mm Z 460 mm Spindle taper SK40 Speed maximum 12.000 RPM Chip transport Machine size 3.400 x 2.400 x 2.800 mm Machine weight 3.950 kg Tool magazine positions: 30 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight of the machine ca.:9,5 t x-travel:406 mm z-travel:380 mm

pulling force - max.:80 t total wight:26 t dimensions of the machine ca.:49 m² m total power requirement:85 kW working stroke:250 mm

With Lehmann rotary table and High pressure coolant unit X travel 700 mm Y travel 420 mm Z travel 380 mm Spindle speed 10.000 rpm Controller SIEMENS 840D

Control Heidenhain TNC 620 Travel X/Y/Z 700/500/500 mm Speed 12,000 1/min IKZ 30 bar Belt filter system Probe Tool magazine for 30 Wkz. SK 40 Conveyor

pulling force - max.:100 t total power requirement:87 kW weight of the machine ca.:51 t dimensions of the machine ca.:95 m² m working stroke:2750 mm max. helix angle:+/- 30 °

turning diameter:150 mm total power requirement:36 kW

turning diameter:150 mm total power requirement:36 kW dimensions of the machine ca.:6,20 x 5,16 x 3,35 m

1 used ACM STAR 700 Vertical Bandsaw New in 2015, as is where is Including Transportdevice

Key data: 1000 mm, 600 mm, 700 mm

Ref.Nr. 00837 Name of the system: Vertical machining center Manufacturer: AXA Model VSC 2-M Year of construction 2000 Operating hours control on 51.155 h:56:02 Machine One 108350:06:047 Program run 34892:28:03 X axis stroke 2360mm/2 x 1000mm Y axis stroke 600mm Z axis stroke 700mm 1 spindle design SK 40 DIN 69 871 A 1 tool changer for 22 mounts side version 1 control panel with CNC path control Heidenhain TNC 426/430 on the left side of the machine 1 control cabinet integrated in the back of the machine Ball screws make Deutsche Star X axis 1510 – 4 – 3914 Ǿ 40 x 20 x 2960lg. Y axis 1510 – 4 – 5103 Ǿ 49 x 29 x 1300 lg. Z axis 1510 – 4 – 4811 Ǿ 40 x 10 x 1190 lg. Measuring system: Make Heidenhain X axis: LS 186 C 2440 ML Y axis: LS 186 C 740 ML Z axis: LS 186 C 940 ML Central lubrication aggregate make Bielomatik Hydraulic ...

turning diameter:150 mm total power requirement:36 kW dimensions of the machine ca.:6,20 x 5,16 x 3,35 m

Key data: 3300 mm, 2300 mm, 1000 mm

Control Siemens 840D Table size 3,500 x 1,250 mm X-travel (longitudinal) 3,300 mm Y-travel (cross) 2,300 mm Z-travel (vertical) 1,000 mm Spindle HSK 100 Rapid traverse X-axis 25m/min Rapid traverse Y-axis 40m/min Workpiece weight 9.000 kg R.P.M. 100 – 12,000 kW 70 Volts 400 Cycles 50 Including: Automatic Tool Changer 60 tools Rotating B - C axis head: B-axis +/- 95 degrees – C-axis +/- 190 degrees.

x-travel:700 mm y-travel:550 mm z-travel:500 mm tool taper:SK40 spindle speed max.:12.000 U/min Tool changer:30 fach electronic handwheel chip conveyor

max. wheel diameter:180 mm gear width: mm max. module:4 total power requirement:14 kW weight of the machine ca.:8 t slide travel axial ( Z-axis ):300 mm work piece - max.:490-640 mm

CNC controller: FANUC Series 18i-MB Axes X-axis travel mm: 800 Y-axis travel mm: 540 Z-axis travel mm: 540 Distance spindle nose - table surface mm: 45 - 685 Worktable Table dimensions mm: 925 x 540 Max. workpiece weight kg: 700 T-Slot version: 18 Spindle Spindle speed rpm: 8.000 Tool system Tool magazine slots: 30 Max. Tool Diameter: 76 Max tool weight kg: 8 Equipment Chip conveyor Machine running times Under power: 24.000 Basic machine dimensions / weight Length mm: 2.955 Width mm: 2.137 Height mm: 2.713 Weight kg: 6.500

Key data: 635 mm, 510 mm, 460 mm

CNC Vertical Machining Center "DECKEL MAHO DMC 635 eco" With path control Siemens 810 Powerline Year of Make: 2010 Travel: X 635 Y 510 Z 460 Speed range: 20 – 8,000 rpm infinitely variable With the following accessories: Rigid angle table 790 mm x 560 mm clamping surface Vertical tool changer with 20 magazine positions Electronic handwheel Tool length measurement Heidenhain TT 140 Full protection cabin with sliding doors and interior lighting Coolant Setup Signal light 4 colour Conveyor Chip rinsing gun 3 Height Adjustable Machine Shoes Operating instructions

Key data: 11000 mm, 3000 mm, 1500 mm

X axis 11.000mm Y axis 3.000mm Z axis 700mm W axis 800mm Spindle diameter 160mm Spindle taper iso 50 Spindle speed 1.800 rpm Spindle power 65kw ATC 60 positions Yom 1995 Nr 02 rotary table:-2.500x2.500mm capacity 25 ton ( 2 axes controlled) -2.000x2.000mm 15 tons capacity ( 2 axes controlled) One birothative head Two boring heads Floor plates included

x-travel:1270 mm y-travel:460 mm z-travel:660 mm Machine hours: 58,355 Spindle speed: 8,000 rpm

x-travel:100 mm y-travel:100 mm z-travel:100 mm total power requirement:0,6 kW weight of the machine ca.:130 kg dimensions of the machine ca.:1600 x 1000 x 1300 mm milling depth:0-50 mm

x-travel:630 mm y-travel:200 mm z-travel:360 mm total power requirement:7,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1500 x 1800 x 1900 mm spindle taper:SK40 table-size:250 x 1100 mm

Width of plate,mm 3000 Thickness of plate,mm 66-150 Description Hot and cold bending Force: 2200t Main roll: 860mm Changeable roll: 500mm Width: 3000mm Bending by circle arc Cold bending: 66mm Hot bending: 150mm Min diameter of cylinder: 1000mm Bending at the angle Cold bending: 30mm Hot bending: 60mm Internal bending radius: 60m weight: 100t

Vertikale Ballenpresse / Vertical Waste Baling Press Pöttinger MP 600 A Serial-No. 5110176 Einfüllhöhe / Loading High max. 1070mm Einfüllöffnung / Filling opening 700 x 500mm Presskasten / Pressing box 700 x 500 x 900mm Ballenformat / Bale format max. 700 x 500 x 500mm Ballengewicht / Bale weight 40 - 80Kg Anzahl Umreifungen / Vertical binding 2 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

table diameter:500 mm total power requirement:3 kW weight of the machine ca.:2 t dimensions of the machine ca.:2300 x 1270 x 2200 mm

Vertikalstapelauslage - Vertical Stack Delivery with Pressing and Marking Device MBO SAP46L Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Stehendbogenauslage / Vertical Press-Stacker Delivery MBO SBAP 46-ME Baujahr / Year 1994 - Serial-No. 940114747 Arbeitsbreite mit ME max. 430mm / Working width with ME max. 430mm Bogenlänge / Sheet length min. 80mm Bogenlänge / Sheet length max. 300mm Stapellänge / Pile length max. 730mm Einlaufhöhe / Infeed height min. 380mm Einlaufhöhe / Infeed height max. 950mm Pressdruck / Pressure 20.000 N Mechanische Geschwindigkeit / Mechanical Speed max: 30 – 160 m/min Eigensteuerung // SelfControl Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Cutting height:150 mm saw band length:2400 mm cutting width:350 mm total power requirement:380 V weight of the machine ca.:350 kg dimensions of the machine ca.:800 x 950 x 1650 mm

A vertical CNC machining center in need of repair is offered for sale. Main motor: 15kW (S1), max. current: 36A, phases: 3, control: Heidenhain. Weight: approx. 7000kg. The main spindle has bearing damage, and the control requires overhaul. An inspection is possible by prior arrangement.

Mains voltage: 400V, 3L+N, 230V, 3L, rated current: 7.5A at 400V, 11A at 230V, frequency: 50/60Hz, short-circuit breaking capacity: 3.5kA, weight: 370kg, an on-site inspection is possible.

Vertikale Pressauslage / Vertical Press Delivery Heidelberg VSA-66.1 Year 1996 - Serial-No. 79719/96-239513 Arbeitsbreite max. 660mm / Working width max. 660mm Markiereinrichtung / Marking Device Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Vertikale Pressauslage / Vertical Press Delivery MBO FA 82-ME Navigator Year 2010 - Serial-No. 104197100101 Arbeitsbreite / Working width max. 820mm mit integrierten Presswalzen / with intergrated press rollers mit Markiereinrichtung / with Marking Device ME Navigator Control Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Vertikale Pressauslage / Vertical Press Delivery Heidelberg VSA-66.D+MKE Year 1998 - Serial-No. 101486/98-256505 Arbeitsbreite max. 660mm / Working width max. 660mm Markiereinrichtung / Marking Device Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Turning Diameter 830 mm Turning lenght 750 mm Spindle speed 2000 rpm Controller FANUC-i Chuck size 24"