veneer used for sale

Dimensions (L/W/H): 4200x1650x2250 mm Weight: 7900 kg Total power requirement: 54 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DATA: Saw blade width: 400 mm Installed power: 5.5 kW Hydraulic operation EQUIPMENT: Hydraulic power unit (Tecno Tubi - OL95/132)

This ITALPRESSE XL/6 30-13 PM BO veneer press was manufactured in 2025. Consider the opportunity to buy this ITALPRESSE XL/6 30-13 PM BO veneer press. Contact us for more information.

Panel dimensions 2.2x1.25 m The machine is functional, but the cylinders are leaking. The sale is in the condition as it is, excl. Warranty, from our warehouse in Düsseldorf, freely loaded.

Code: 0283 Brand: ITALPRESSE Model: 25/13 Fabricated platen for diathermic oil press Technical data: Platen dimensions: mm 2500 x 1300 Max temperature up to 120° Max working pressure: 3/5 kg/cm2 Heating medium pressure 0,5 ate Composition: Aluminium - Flat gauged steel sheet - Coil of piping for fluid circulation - Reinforcement piping - Flat gauged steel sheet - Insulating material

This CMB PFR-CCL was manufactured in 2017. It features a motorized loading table and an automatic cold press with a maximum pressing force of 160 tons. The press operates with a hydraulic unit and a control panel for precise operation. Ideal for handling large panel sizes up to 5,500 x 1,600 mm. If you are looking to get high quality pressing capabilities consider the CMB PFR-CCL machine we have for sale. Contact us for more information.

ORMA 3-deck press NPC 26/14-3V + Höllenholscher Kühlstern discharge from site for sale.

This thermo lamination system was manufactured in 2001. The BÜRKLE FFAII 1300 features a working width of 1300 mm and handles panel dimensions from 200 to 1300 mm in width and 400 to 3000 mm in length, with thickness ranging from 8 to 40 mm. It includes a thermal oil heater, smoothing calender, and a comprehensive transport and laminating system. Ideal for high-efficiency thermo lamination processes. For more information about this thermo lamination system, please reach out to us.

MONGUZZI CNC 2-Knife Veneer Cutting Machine AFD-52-3000 from location for sale.

Hot platen press Brand: OMC Type: PL 90s New machine Technical data Plate size: 3000 x 1300 mm Stroke: 400 mm Stroke type: Upward stroke (from bottom to top) Plate type: Elkom electronic plates Press force: 90 tons on 80% of the surface Press cylinder: 6 x Ø 70 mm Specific pressure: 2.05 kg/cm² on 100% of the surface, 2.56 kg/cm² on 80% of the surface Loading and unloading side: 3000 mm Heating system: Electronic 25.4 kW, maximum temperature of 120°C Automatic opening with timer Control panel: Standard Connection: 400 V, 50 Hz, 3 ph Safety device: Safety cable around the entire press Emergency button Two-hand operation CE standard Press structure The press structure is made of composite and welded steel. The structure of both the fixed and moving platen is made of composite and welded steel. The press is equipped with a rack and pinion guide system to ensure perfect parallel move ...

This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine.

Veneer technology Wolkenstein veneer assembling machine LZM-LA SE 800 ex location for sale.

This FISCHER & RÜCKLE Monguzzi AFD 35 / 2600 veneer guillotine was manufactured in 2006. It features a max cutting length of 2600 mm and widths from 45 to 350 mm. Equipped with a solid, heavy-duty build and a quality hydraulic system, it ensures high productivity and precise cuts. Ideal for preparing veneer strips for splicing. Contact us for more information about this machine.

KUPER FW-920 Zig-Zag Veneer Gluer Passage width max. approx. 920 mm, veneer thickness approx. 0.4 - 2 mm, feed speed approx. 15 m/min

This FISCHER & RÜCKLE FZR15 / DAR 22 was manufactured in 2009. A used veneering machine, it excels in efficient crossfeed glue splicing of veneer strips. It features a semi-automatic feeding device, a panel automatic for component-matched faces, and a direct stacking device DAR-22 for gentle discharging and stacking. Ideal for high durability and ease of operation. Contact us for more information about this machine.

Veneer Scissors Brand: Josting Model: EFS 3200 Cutting length: 3200 mm Two-hand control, no light barrier Rear stop with handwheel adjustment

This FISCHER & RüCKLE FZR15 / DAR 12 was manufactured in 2014. Its a used veneering machine designed for efficient crossfeed glue splicing of veneer strips. Features include a feeding device for semi-automatic feeding, a panel automatic for component-matched faces, and a direct stacking device for gentle discharging. Ideal for applications requiring precise veneer splicing. Contact us for more information about this machine.

A veneer jointing and fine cut sawing machine Scheer is available. Cutting length: 3100mm, cutting height: 45mm, max. saw blade diameter: 180mm, pressure beam opening height: 80mm, fence depth: 500mm, machine dimensions X/Y/Z: approx. 3750mm/1400mm/1300mm, weight: approx. 500kg. An on site inspection is possible.

Code: 0240 Brand: KUPER Model: FW /J 900 Veneer thread splicer Technical data : Throat depth mm 900 Feed speed mt 15/min Thickness of veneer 0,4 - 2 mm Motor 0,18 Kw Overall dimensions: mm 1350 x 580 x 1600 h Weight kg 300

Manufacturer: Italpress, Type: Mark C 18-30, Year: 1994, Durchlauffunierpresse: yes, Dimensions of heating plate approx. mm: 3000 X 1800, Number of storeys: yes, Charging side: längs, Landing opening mm: 200, Steel heating plates: 210 oben/unten 120, Min-max temperature: 145, Heated by: Dampf, Working temperature: 150, Overall pressure kN: 200 bar, Return cylinder N/cm2: yes, Number of pressing cylinders: 8 /Durchmesser 300 mm, Stages: 1, Press length mm: 2800, Pressing width mm: 1700, Transport roller conveyor: Einlaufrollenbahn, Longitudinal through running press: yes, Outlet conveyor: yes, Electrically heated kW: yes, Year :1994

TECHNICAL DATA: Usable width: 1160 mm Installed power: 0.50 kW

Single-knife veneer cutting machine JOSTING EFS 2800, built in 1975, very good used condition, in use until 02/2026, Spare blade Price from location

Code: 0374 Brand: ITALPRESSE Model: V/4 Mechanical cold press for wood, panels, doors, furniture, composite materials, technical materials, plastics, aluminium and various other materials Working dimensions 2200 x 1000 mm Platen dimensions: n° 2 platens 1100 x 1000 mm NEW aluminium sheets Option to work on a single table or on separate tables Opening 650 mm N° 4 pressure screws N°2 motors 0,75 Hp each Overall dimensions mm 2550 x 1000 x 1650 h Weight kg 870

Veneer Saw Scheer Type FM 3 Machine No. 113462 Cutting length 3000 mm Cutting height maximum 55 mm Maximum insertion height 60 mm Saw blade diameter maximum 180 mm Saw blade on the machine diameter 150 mm Motor power 1.65 kW Feed manual Height adjustment with handwheel With rear table support 3120 mm x 600 mm Dimensions 3450 mm x 1130 mm x H 1400 mm Weight approx. 450 kg

Hydraulic veneer cutter MONGUZZI mod. 3200 used theoretical useful cut mm. 3200 nr. 2 motors installed power HP 10 Motorized rear guide with mechanical display Cutting height REER safety barrier (new) for finger detection - security level type 4 - Machine length mm. 4400 Weight kg. 3800 overhauled machine, in excellent condition CE compliant

Plate dimensions: 2.500 x 1.1250 mm Daylight opening: 300 mm Number of daylights: 1 St. Heating: Specific pressure: kg/cm² Total pressure: to Motor output: kW Dimensions (L/W/H): mm weight of the machine ca.: ca. 3 t kg Year: unbekannt Year: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Siemens high-frequency veneer and gluing press is available. Pressing force: 100t, high-frequency power: 6kW, press area X/Y: 2000mm/1200mm. An on-site inspection is possible.

Orma C4 2200×1200 veneer shelf press Shelf length 2200mm Shelf width 1200mm Maximum clearance between shelves 475mm Maximum working pressure 150bar Press on 4 cylinders 1.1kw Hydraulic Pump Motor Shelves heated with CO water Net price

Shelf press for veneering SIPA 2500×1280 Shelf length 2500mm Shelf width 1280mm Load height 440mm Operating pressure 120bar Press on 4 cylinders Shelves heated with boiler water

Code: 0419 Brand: ITALPRESSE Model: V/2 Electric press for cold gluing of doors, furniture, panels, composite materials, technical materials, plastics, aluminum, various materials Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2500 x 1200 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2850 x 1200 x 1650 h Weight kg 880

This Fischer & Rückle FZR 21 was manufactured in 2015. A used veneer crossfeed splicing machine, it efficiently splices parallel jointed veneer strips into endless or component-matched veneer faces. It handles veneer strip lengths from 350 to 2150 mm and widths up to 600 mm, with a thickness range of 0.3 to 1.5 mm. Features include a semi-automatic feeding device and a horizontal pressing system for tight glue joints. For more information about this machine, please reach out to us.

Code: 0421 Brand: ORMAMACCHINE Model: NPC - CE Standard Hot press with diathermic oil heating for wood, joinery, furniture, custom-made furniture, panels, doors, composite materials and various – CE Standard Platen sizes mm 3000 x 1580 Solid steel platens with diathermic oil heating N° 6 pistons diameter 85 Opening mm 400 Platens heating by electric boiler Thrust 120 ton Guides side racks Mylar-coated platens Overall dimensions mm 3700 x 1850 x 2600 h

Code: 0120 Brand: ORMAMACCHINE Model: NPC/3000S - CE Standard Hot press with diathermic oil for wood, veneer, wood panels, coated panels, veneer, composite materials, cork, aluminium and various materials - CE Standard Platen dimensions mm 3000 x 1300 Thrust ton 70 N° 6 pistons Opening mm 400 Motor Hp 2 Heating with diathermic oil by electric boiler Mylar-coated platens Overall dimensions: mm 3600 x 1550 x 1900 h Weight kg 3500

Manni 2500×1300 veneer shelf press Shelf length 2500mm Shelf width 1300mm Load height 410mm Working pressure 300bar Press on 4 cylinders Net price

A Kuper zigzag veneer splicing machine is offered. Overhang: 1150mm, working width: 1150mm, veneer thickness range: approx. 0.3mm-3mm, feed rate: approx. 10-30m/min, feed drive power: 0.55kW, working height: approx. 980mm, machine dimensions X/Y/Z: approx. 2160mm/780mm/1650mm, weight: approx. 540kg. Documentation available. Inspection possible by appointment.

Chopper, Faz Model, Manufactured by Josting

Code: 0477 Brand: EMME ELLE - ITALY Model: T.O. 3200 - CE Standard Hydraulic veneer guillotine for joinery, furniture, doors, window and door frames, slitting and other applications – CE Standard Technical data: Sturdy construction The hydraulic power unit controls the movement of the cylinders to move the pressure plate and the blade Cutting length 3220 mm Cutting height 100 mm Electrically operated rear stop – Max depth 750 mm – Min depth 20 mm Power unit pump motor 7,5 Hp Rating motor 0,75 Hp Safety photocells Weight kg 4300

Code: 0478 Brand: ITALPRESSE Model: V/2 Mechanical press for cold gluing Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2200 x 1000 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2550 x 1000 x 1650 h Weight kg 750

Code: 0479 Brand: SIPA Model: S20F Hydraulic cold press for panels, doors, furniture, timber, composite materials, engineering materials, plastics, aluminium and other materials Steel frame Platen dimensions 2500 x 1300 mm Platens opening 500 mm Total pressure 20 t N° 2 cylinders diameter 40 mm Motor power 1,5 Hp Overall dimensions mm 2800 x 1300 x 2110 h Weight kg 740

L. 2500 x B. 1300 Bürkle Veneer press 6 Column Cylinder 98 tons of pressure Heating plates Safety line Immediately available

Copper-veneer assembly machine FW/J 920-Bj.95 -Front and rear wooden pads are no longer available - Instruction manual available

pressing area: 2200mm x 1100mm; opening: 400mm; heating: electric; plate surface: ALU; Emergency stop switch: yes, ripcord; pressure: 60t; number of cylinder: 4; current consumption: 17A; machine length: 2500 mm; machine width: 1300mm; weight: 3000kg;

Shearing Joining & Fine Blanking Machine FM18-3100 cuts wood-based materials, veneers, chipboard, fibre and plastic panels, Hard paper, foils, thin metal sheets and acrylic glass - Angular, joint-tight and splinter-free The machine has been certified by the BG "Holz" in accordance with the principles for the Testing of the occupational safety of technical work equipment examined. It bears the "GS" mark for tested safety. -Operating instructions available

pressing area: 3000mm x 1300mm; opening: 450mm; heating: electrically / thermo-oil; max. temperature: 120°; plate sourface: stainless steel; press opening: automatically - timer / manual; emergency stop switch: yes / ripcord; pressure: 120t; number of cylinder: 6; electriticy: 36A; motor power: 21 kW; machine length: 3600 mm; machine width: 1800mm; weight: 4500kg;

pressing area: 2500mm x 1250mm; opening: 360mm; heating plate top: elektric; heating plate bottom: defective; plate surface: ALU - anodized; pressure: 90t; number of cylinder: 4; electricity: ca. 33A; machine length: 3000 mm; machine width: 1500mm; weight: 4000kg;

working width: 630mm; feed: 7m/min;

Veneer splicing machine using hot-melt glue thread. Equipped with metal worktable, feed rollers, thread spool enclosure, thread guides and control panel with ammeter and adjustment dial. Nameplate specifications: - Voltage: 400 V - Phases: 3 - Frequency: 50 Hz - Rated current: 2.2 A Auction-ID: A1-50699-14

Veneer splicing machine using hot-melt glue thread. Equipped with a metal worktable, feed rollers, thread guides, control panel and pneumatic pressure regulator with gauge. Visible dust accumulation, paint wear and surface corrosion. Operating condition not verified. Auction-ID: A1-50699-13

Code: 0489 Brand: CASATI MACCHINE Model: 3100 - CE Standard Automatic veneer guillotine for joinery, furniture, doors, window and door frames, sliced veneers and other applications – CE Standard Technical data: Sturdy structure Hydraulic power unit for blade cutting movement Cutting length 3100 mm Electrically operated rear stop Cutting inspection light Pump motor 4 Hp Register motor 0,5 Hp Safety photocells Side guide for angled cuts Overall dimensions mm 4150 x 1600 x 1500 h Weight kg 3200

Code: 0491 Brand: KUPER Model: FW MINI 630 - CE Standard Thread splicer for veneer,for joinery workshops, doors, furniture, veneer, custom-made furniture, panels and various items - CE Standard Technical data Arm mm 630 Veneer thickness mm 0,4 - 2 Feeding 7 mt/min Voltage 220 volts Overall dimensions: mm 850 x 370 x 400 h Weight kg 31