veneer press used for sale

General SKU232M159 MakeTop Industrie F-77 013 Vaux Le Penil Type1876 0000 Reactor cristallisation CO2 No.1449 Year of construction2007 Mounted on legsin framework Pressure Working pressure350 Bar Main Features MaterialStainless steel Volume0.1 Ltr. Motor0.25 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactorcheck Capacity0,094 Ltr Vessel sizesdia. 114x145mm With jacketcheck Max. temperature150°C Motor0,25 KW, 400 Volt Information LocationBarneveld With switchgearcheck Floorspace1,0x0,6M Total height1,0M Weight130 KGFine chemicalsOther chemicalRubberAgrochemicalsPlastic & polymersStainless Steel ReactorsCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganicOintmentsGeneric medicinesPaints & coat ...

General SKU001A039 MakeUHDE Hagen No.2578 Year of construction1978, Internal coil built in 1991 Mounted on legscheck Pressure Working pressure300 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor ReactorHigh pressure Capacity20 Ltr Vessel sizesdia. 215x600mm Dished bottomcheck Dished top sidecheck With jacket/Electric heating Internal heating spiral(0,8 Ltr) Max. temperature350 Degr. C. With anchor stirrercheck (built in 1991) Motor0,55 KW, 220/380 Volt (Ex) Speed mixing shaftvariable (± 155-1120 Rpm) Stainless Steel Reactors MaterialStainless steel 1.4306 (304L) Information LocationBarneveld Floorspace0,9x0,9 m Total height2,2 m Weight850 kg Extra Specifications- Vessel does not have a bottom outlet Fine chemicalsOther chemicalRubberAgrochemicalsPlastic & polymersStainless Steel ReactorsCata ...

General SKU004Y057 MakePressindustria S.p.A. TypeTE.3/SV/R/5 No.4302 Year of construction1983 LocationBarneveld Pressure Working pressure0.067 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume7 Ltr. Motor0.55 KW Specified Features - Processing vessel MaterialStainless steel 1.4401 (316) Closed stirring vesselVacuum processing vessel (1x) Capacitymin. 3/max. 7 Ltr Vessel sizesdia. 250x250mm, Vessel can be lifted hydr. Dished bottomcheck Flat top sidecheck With covercheck With jacketcheck Max. temperature160 Degr. C. With anchor stirrerscraper stirrer Counter rotating stirrercheck Motor0,07/0,22 KW, 220 Volt (3 Ph) Speed mixing shaft3-60 Rpm With homogeniser(400-2000 Rpm) Motor0,2/0,55 KW Information With switchgearcheck Floorspace1,2x0,9 M Total height2,3 M Technical specs Extra informationVessel can be  ...

• 120 tons total pressing force • Pressing area 3,000 x 1,350 mm • With patented, thermostable electric heating plates with automatic temperature control system • Connected load of the heating plates with economy circuit 10.6 kW • Connected load of the hydraulics 2.2 kW • in 6-cylinder version Ø 85 mm • Lockable main switch • Push-button control • Stop button • Safety ripcord, safety edge • Timer with automatic opening and acoustic signal • Stroke = opening 400 mm • Infinitely adjustable stroke limitation • 2-stage hydraulics with automatic pressure follow-up • Compact hydraulic power unit mounted maintenance-free in the oil tank • Teflon bronze guides in the cylinders • Hard chrome-plated steel pistons • Heavy rack and pinion compensation for synchronous table movement • fully open on four sides • Economy circuit installed as s ...

PLC – controlled (touch screen) multifunctional press with multiple functions Firstly, our multi-function press is a vacuum press, three-dimensional film deformation with or without membrane. Vacuum chamber size 2,340 x 1,340 mm Maximum workpiece height 60 mm Equipped with a vacuum diaphragm at the top and bottom. The press is equipped with a powerful vacuum system and a vacuum tank, which guarantees a constant and uniform supply of vacuum to the working chamber. Drive power vacuum pump 4.5 kW Vacuum tank volume 500 liters Vacuum pump flow rate 100 m³/hour Two pieces of air heat exchanger, each with a heating capacity of 3 kW. Secondly, our multi-function press is a hydraulic plate press with ten pieces of press cylinder and 200 tons pressing force – Suitable for different applications - - Cold and hot pressing - Single-sided and double-sided veneer pressing ...

Working Sizes: 1300 x 3500 mm

Code: 0328 Brand: ITALPRESSE Model: GL / 14,5 - 50 - 420 T - CE Standard Hydraulic press for composite materials and solid surfaces, moulds and decorative panels, suitable for use in the aerospace, aviation, woodworking, furniture, interior design, automotive, shipbuilding, construction, energy, defence, sports and public transport sectors, and various – CE Standard – Year 2005 Technical data: N°5 solid steel plates 1450 x 500 mm N° 3 pistons Diathermic oil heating Total thrust 420 tonnes Working diagram - see enclosed diagram Max power 9,3 Kw Full-load current 19 A The oil tank is located on top of the press and is fitted with a sight glass for checking the oil level Fluid (oil) temperature controller Two-hand control for closing the press Photocell safety barriers Fixed safety guards

Veneering press OMC PL 105 LC 30/13 Water Work surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature 85 degrees Control system logic contorl Machine control from touch panel readings Temperature, pressure force, shelf opening time, loading area calculator, programming of gluing processes Power 21KW CE Certificate Production 2023 Machine available on request New machine Net price

Press pressure up to 900 KN Hint: without ripcord

Dimensions: 2,200 x 1,100 mm heating plate size Gold anodized heating plates 400 mm table opening height 4 hydraulic cylinders 50 tons of pressing pressure Stroke limitation Automatic opening Electrical opening and closing of the press table

Continuous press Manufacturer: Wemhöner Model: VSF Year of construction: 1972 Panel dimensions: 3600 x 2200mm Heating medium: Oil Feeding Destacking Total length approx.: 12.000mm

Code: 0378 Brand: ORMAMACCHINE Model: NPC 6/90 E - CE Standard Hot press with electric platens for veneering, panels, furniture, custom-made furnishings, wooden doors, kitchens, bathroom furniture, composite materials, plastics, and various - CE Standard Technical data: Platen dimensions 2500 x 1300 mm Total thrust 90 tons N° 6 cylinders Cylinder diameter 70 mm Stroke 400 mm Pressure 3 kg/cm² Motor 2 Hp Electric Platens: Max temperature up to 120° C, max working pressure 7 kg/cm². Platen made of a 12 mm aluminium plate which resistances are inserted in underneath a chipboard support with reinforcement tubes inside Perimeter emergency rope Double rack system Lateral guides on platens for a perfect movement further safety feature of the pressing platen Overall dimensions mm 3060 x 1650 x 1850 h Weight kg 3400

Code: 0381 Brand: OMC - ITALY Model: PL/160 - CE Standard Hydraulic hot press with solid platens, heated by an electric oil boiler, for panels, veneer, woodworking, furniture, custom-made furnishings, wooden doors, composite materials, and various - CE Standard Platens dimensions 3500 x 1300 mm Solid steel perforated platens N°1 intermediate platen Max temperature 250°C Opening 400 mm N° 8 pistons - diameter 85 mm Specific working pressure 30/40 kg/cm² Total thrust 160 tons Heating by 3 diathermic oil boilers Safety devices: perimeter safety cable, emergency stop button, two-hand control Automatic opening with timer Control panel Motor 3 Hp Power supply: 400 V / 50 Hz Overall dimensions mm 4200 x 1600 x 2250 h Weight kg 5500

HOT PRESS model SIMI 4LP second hand machine plates useful size mm. 2500 x 1300 n.04 pistons diam.mm. 80 max. thrust Ton. 60 specific pressure max. kg.2 / cm2 opening mm. 320 hot water plates heating via wood boiler (optional) weight kgs. 3000

HOT PRESS MODEL PL 90s 3000x1300 mm PS VBO TECHNICAL CHARACTERISTICS Platens dimensions 3000x1300 mm Stroke 400 mm Type of stroke Upstroke design (from bottom to top) Type of platen Assembled platens with coil and aluminum covering Total thrust 90 ton on 80% of the surface Pressing Cylinders N° 6 cylinders ø70 mm Specific Pressure 2.05 kg/cm2 on 100% of the surface 2.56 kg/cm2 on 80% of the surface Loading and Unloading Side3000 mm side Type of Heating system Oil boiler ? maximum temperature = 120°C Heating system specificationsElectric boiler 18 kW Opening Automatic by timer Control Board Standard Power supply 400V, 50Hz, 3ph Security device Safety rope around the press Red emergency Button Two Hand control Norma ...

Veneer press Brand: ORMA Type: NPC/DIGIT 6/90 New machine Technical datas: Press area: 2500x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (up to 120°C) Optional: - Aluminium coating - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - Extra charge for temperature up to 150°C - Extra charge for temperature up to 200°C - Mylar protection foil 350,00 ? per panel - Pressure plate covered with glass fiber fabric Teflon - Hardware for Industry 4.0

Hot press Make: ORMA Type: NPC/DIGIT 6/95 New machine Technical datas: Press area: 3000x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (120°C) Optional: - Aluminium coating for panels - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - 4 side loading - Max. temperature up to 150°C - Max. temperature up to 200°C - Mylar protection foil - Pressure plate covered with glass fier fabric Teflon - Hardware for Industry 4.0

Manufacturer: Simmpianti, Year: 1998, Longitudinal through running press: yes, Stages: 1, Work piece width min-max mm: 2700 mm X 3200 mm, Min.-max. workpiece height in mm: 3-80, Press length mm: 3200, Pressing width mm: 2700, Press power kg /cm²: 4-6, Warmwasser beheizt: yes, Feeding: yes, Automatical glue supply: yes, Veneer applicaition table: yes, Through running machine: yes, Destacking: yes, Year :1998

Manufacturer: Sergiani Querdurchlaufpresse Warmwasser, Type: GSA, Year: 2009, Durchlauffunierpresse: yes, Dimensions of heating plate approx. mm: 3500 X 1300, Number of storeys: 1, Cylinder stroke: 350, Charging side: Quer, Landing opening mm: ca.350, Steel heating plates: yes, Min-max temperature: 0-120, Heated by: Warmwasser, Overall pressure kN: ca.4 kg²cm, Press length mm: 3500, Pressing width mm: 1300, Transport roller conveyor: yes, Thermoilpumpenstattion: yes, Lateral press: yes, Belt conveyor: yes, Year :2009

Manufacturer: Italpress, Type: Mark/C, Year: 2000, Program: yes, Control: Siemens, Longitudinal through running press: yes, Stages: 1, Press length mm: 3400, Pressing width mm: 1200, Press power kg /cm²: 6, Zylinder: 8, Inlet conveyor: yes, Warm water heated: yes, Work piece thickness max mm: 100, Through running machine: yes, Belt conveyor: Auslauf, Year :2000

-) Press surface: 3,100 x 1,600 mm -) Cylinder: 8 cylinders -) Floors: 5 floors, 6 heating plates -) Heating plates: drilled 40mm steel heating plates -) Heating: for hot water or thermal oil (up to 200° -) Press opening: up to 600 mm -) Cooling: with own unit Etc.

HYDRAULIC PRESS with hot platens model ITALPRESSE SCF 6 second hand machine for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm.70 max. thrust Ton. 120 opening mm. 400 hydraulic pump motor power Hp 3 hot water plates heating via wood boiler weight kgs. 4500 volt. 380/50

Code: 0223 Brand: ITALPRESSE Model: PHF Hydraulic press for curved veneers for processing seats, chair backs, benches, tables and other curved items Technical data: Platen dimensions mm 2600 x 1600 Opening between platens mm 1500 Thrust ton 100 Movement from bottom to top Motor power Hp 4

Simimpianti 3500×1300 veneer shelf press Shelf length 3500mm Shelf width 1300mm Two Batches Press on 8 cylinders Shelves heated with CO water Operating pressure max 300bar Piston diameter 80mm Machine Weight 7000kg Machine dimensions 435x160x235cmH Net price 65,000zł

Electricity connection 400V 13kW 2 heating plates à 1200 x 2250 mm Heating plates controlled by 2 thermostats Press pressure at 250 bar LxDxH: 2590 x 1330 x 1950 mm Weight approx. 2800 kg Press thickness 380 mm

TECHNICAL DATA: Work table: 3500 x 1300 mm Solid work tables 08 Piston: Ø 85 mm Vertical stroke: 400 mm Total installed power: 31 kW Operation with diathermic oil

Panel size: 1350 x 3000 mm Pressing capacity: 90 ton  Plate Type: Hard Aluminum Plates  Travel+opening 400mm Cylinders 6 pieces Electric boiler 18 KW V400/50 Ce version Myler protective film for an easy Fast and efficient cleaning of the press surface  All-round tension via spring system of the Myler protective film 

Panel dimensions: 1350 x 3500 mm Pressing power: 120 ton Plate Type: Hard Aluminum Plates Travel+opening 400mm Cylinder 8 pieces Electric boiler 18 KW V400/50 Ce version Myler protective film for an easy Fast and efficient cleaning of the press surface All-round tension via spring system of the Myler protective film

Code: 0283 Brand: ITALPRESSE Model: 25/13 Fabricated platen for diathermic oil press Technical data: Platen dimensions: mm 2500 x 1300 Max temperature up to 120° Max working pressure: 3/5 kg/cm2 Heating medium pressure 0,5 ate Composition: Aluminium - Flat gauged steel sheet - Coil of piping for fluid circulation - Reinforcement piping - Flat gauged steel sheet - Insulating material

This ITALPRESSE XL/6 30-13 PM BO veneer press was manufactured in 2025. Consider the opportunity to buy this ITALPRESSE XL/6 30-13 PM BO veneer press. Contact us for more information.

This FORMAT4 HVP Typ 4 was manufactured in 2019. Designed for integration with existing heating systems, it can press at temperatures up to 90°C. The robust steel platen supports a maximum pressure of 5kg/cm², making it ideal for veneer processing. Consider the opportunity to buy this FORMAT4 HVP Typ 4 veneer press. Contact us for more information about this machine.

This CMB PFR-CCL was manufactured in 2017. It features a motorized loading table and an automatic cold press with a maximum pressing force of 160 tons. The press operates with a hydraulic unit and a control panel for precise operation. Ideal for handling large panel sizes up to 5,500 x 1,600 mm. If you are looking to get high quality pressing capabilities consider the CMB PFR-CCL machine we have for sale. Contact us for more information.

This thermo lamination system was manufactured in 2001. The BÜRKLE FFAII 1300 features a working width of 1300 mm and handles panel dimensions from 200 to 1300 mm in width and 400 to 3000 mm in length, with thickness ranging from 8 to 40 mm. It includes a thermal oil heater, smoothing calender, and a comprehensive transport and laminating system. Ideal for high-efficiency thermo lamination processes. For more information about this thermo lamination system, please reach out to us.

This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine.

This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine.

Veneer press Bürkle With 2 floors Type S 100 250/130 Panel size 2550 mm x 1300 mm Deck press with 2 shelves Maximum opening between the panels approx. 350 mm Hydraulic Press Cold Press Press force 100 tons. Surface pressure 3.1 kg/cm Number of cylinders 6 pieces Piston diameter 80 mm Rack and pinion guide Rated current 5.4 A Frequency 50 HZ Current type 3 PH Operating voltage 3 PH Dimensions approx. 3350 mm x 1525 mm x H 1845 mm

Panel dimensions 2.2x1.25 m The machine is functional, but the cylinders are leaking. The sale is in the condition as it is, excl. Warranty, from our warehouse in Düsseldorf, freely loaded.

Joos Veneer Press HP 65/2 Panel size 1100 x 2500 mm ges. Pressing pressure: 650 kN Press height: 400 mm Number of cylinders: 4 Basic dimensions: 2900 x 1300 x 2040 L-W-H Used machine Condition: super Prices: free loading plus VAT

ORMA 3-deck press NPC 26/14-3V + Höllenholscher Kühlstern discharge from site for sale.

Manufacturer: Italpress, Type: Mark C 18-30, Year: 1994, Durchlauffunierpresse: yes, Dimensions of heating plate approx. mm: 3000 X 1800, Number of storeys: yes, Charging side: längs, Landing opening mm: 200, Steel heating plates: 210 oben/unten 120, Min-max temperature: 145, Heated by: Dampf, Working temperature: 150, Overall pressure kN: 200 bar, Return cylinder N/cm2: yes, Number of pressing cylinders: 8 /Durchmesser 300 mm, Stages: 1, Press length mm: 2800, Pressing width mm: 1700, Transport roller conveyor: Einlaufrollenbahn, Longitudinal through running press: yes, Outlet conveyor: yes, Electrically heated kW: yes, Year :1994

Corpus press manufactured in 2003. This PRIESS U HORSTMANN KP-5-CNC + ZWA-1-CNC + Buffer features workpiece dimensions with a cabinet height ranging from 300 mm to 2500 mm, a width of 300 mm to 1300 mm, and a depth of 160 mm to 700 mm. It requires a minimum room height of 3700 mm and operates at a working height of 930 mm. If you are looking to get high-quality veneer processing capabilities, consider the PRIESS U HORSTMANN KP-5-CNC + ZWA-1-CNC + Buffer machine we have for sale. Contact us for further details.

pressing area: 2550mm x 1250mm; opening: 400mm; heating: elektric; plate surface: ALU - eloxiert; Emergency stop switch: yes; pressure: 80t; number of cylinder: 4; electricity: 32,2A; machine length: 3000 mm; machine width: 1500mm; weight: 4000kg;

pressing area: 2500mm x 1100mm; opening: 400mm; heating: elektrisch; plate surface: ALU - Gold eloxiert; Emergency stop switch: yes; pressure: 65t; number of cylinder: 4; electricity: 22A; machine length: 3500 mm; machine width: 1300mm; weight: 3000kg;

pressing area: 2500mm x 1250mm; opening: 360mm; heating plate top: elektric; heating plate bottom: defective; plate surface: ALU - anodized; pressure: 90t; number of cylinder: 4; electricity: ca. 33A; machine length: 3000 mm; machine width: 1500mm; weight: 4000kg;

pressing area: 3000 mm x 1350 mm; opening: 400 mm; heating: electrically; plate sourface: alu; emergency stop switch: yes / ripcord; pressure: 140 t; number of cylinder: 8; electriticy: 34 A; motor power: 22,4 kW; machine length: 3550 mm ; machine width: 1550 mm;

pressing area: 3000mm x 1300mm; opening: 450mm; heating: electrically / thermo-oil; max. temperature: 120°; plate sourface: stainless steel; press opening: automatically - timer / manual; emergency stop switch: yes / ripcord; pressure: 120t; number of cylinder: 6; electriticy: 36A; motor power: 21 kW; machine length: 3600 mm; machine width: 1800mm; weight: 4500kg;