ven used for sale

A veneer jointing and fine cut sawing machine Scheer is available. Cutting length: 3100mm, cutting height: 45mm, max. saw blade diameter: 180mm, pressure beam opening height: 80mm, fence depth: 500mm, machine dimensions X/Y/Z: approx. 3750mm/1400mm/1300mm, weight: approx. 500kg. An on site inspection is possible.

Veneer Scissors Brand: Josting Model: EFS 3200 Cutting length: 3200 mm Two-hand control, no light barrier Rear stop with handwheel adjustment

230V; v.v. coin insertion, cooling Auction-ID: A1-50597-194

Auction-ID: A1-51214-92

Auction-ID: A1-51692-689

Code: 0240 Brand: KUPER Model: FW /J 900 Veneer thread splicer Technical data : Throat depth mm 900 Feed speed mt 15/min Thickness of veneer 0,4 - 2 mm Motor 0,18 Kw Overall dimensions: mm 1350 x 580 x 1600 h Weight kg 300

Auction-ID: A1-51692-727

Auction-ID: A1-51214-97

Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball valve, temperature switch, thermostat, expansion valve -Manufacturer: Artig, quick vent 3/8, unused, original packaging -Type: IV10R-ART -Quantity: 3 pieces -Price: Per piece -Package dimensions: 50/65/H95 mm -Weight: 0.2 kg/piece

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louvre flaps, non-return flaps, lamellar fans -Ventilation flap: Louvre fan louvre flap -Ventilation flaps: mechanically adjustable, without drive -Opening 6 slats: 1170 x 510 mm -Dimensions: 1325/560 / H115 mm -Weight: 21 kg

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, ventilation grilles, compact grilles, circulating air intake grilles -Manufacturer: Schako, compact grille ventilation grille ovp -Type: KG-R-8 515x65mm -Material: steel, galvanized -Total dimensions: 560/100/H60 mm -Weight: 1.8 kg

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, butterfly valve, gate valve, manual gate valve -Gate valve: manual gate valve for ventilation duct -Pipe diameter: 300/260 mm, see photos -Number: 2x barrier slide available -Price per piece -Total dimensions: 340/225/H500 mm -Weight: 12.7 kg

230V; v.v. coin insertion, cooling Auction-ID: A1-50597-193

Auction-ID: A1-51692-628

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, axial fan axial fan -Type: unfortunately without type designation -Motor: 380V -Fan: Ø 590 mm -Number: 2x fans available -Price per piece -Dimensions: 590/590/H220 mm -Weight: 13 kg/pc.

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, axial fan axial fan -Type: HE823412 FTXR 184259/56K -Power: 0.473/0.210 kW / 1350/1030 rpm -Fan: Ø 500 mm -Dimensions: Ø 660 / 240 mm -Weight: 11 kg

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louvre flap, non-return flap, lamellar fan -Ventilation damper: louvered louvre damper -Type: 7 mechanically adjustable slats, without drive -Number: 4x ventilation flap available -Price per piece -Total dimensions: 1240/1240/80 mm -Weight: 40 kg/pc.

Ventilation system, comfort compact ventilation, ventilation control, ventilation device control -Manufacturer: Aircool WGB control ventilation device -Type: unfortunately no exact type designation -Individual components: see photos -Quantity: 19x controls available -Price per piece -Dimensions: 380/240/H415 mm -Weight: 14.7 kg/pc.

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter, ventilation filter -Manufacturer: UCC Parker, Air Filter Air Breather Filter OVP -Type: SPA 7131 AB 687131.UC -Number: 25x air filters available -Price: per piece -Packaging dimensions: 80/80/H75 mm -Weight: 0.1 kg/piece

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter, ventilation filter -Manufacturer: UCC, Air Filter Air Breather Filter -Type: 40 5 -Number: 4x air filters available -Price: per piece -Dimensions: Ø 77 x 65 mm -Weight: 0.2 kg/piece

Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: flange ring -Inside: Ø 257 mm -Flange: bolt circle Ø 285 x 6 mm -Number: 34x flange ring available -Price: per piece / minimum order 2 pieces -Dimensions: Ø 307 x 4 mm -Weight: 0.7 kg/piece

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, butterfly valve, gate valve, manual gate valve, gate valve/chain gate valve -Shut-off valve: for ventilation duct extraction system -Pipe diameter: 100 mm, see photos -Number: 2x gate valves available -Price: per piece -Dimensions total: 270/160/H180 mm -Weight: 1.2 kg

Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle - flexible connection -Handover: in its current condition as inspected -Seal: damaged, see photos -Ventilation duct: Adapter with elastic connection -Opening: 925 x 855 mm / 750 x 750 mm -Height: 355 mm -Transport dimensions: 925/855/H355 mm -Weight: 18 kg

Manufacturer: Italpress, Type: Mark C 18-30, Year: 1994, Durchlauffunierpresse: yes, Dimensions of heating plate approx. mm: 3000 X 1800, Number of storeys: yes, Charging side: längs, Landing opening mm: 200, Steel heating plates: 210 oben/unten 120, Min-max temperature: 145, Heated by: Dampf, Working temperature: 150, Overall pressure kN: 200 bar, Return cylinder N/cm2: yes, Number of pressing cylinders: 8 /Durchmesser 300 mm, Stages: 1, Press length mm: 2800, Pressing width mm: 1700, Transport roller conveyor: Einlaufrollenbahn, Longitudinal through running press: yes, Outlet conveyor: yes, Electrically heated kW: yes, Year :1994

TECHNICAL DATA: Usable width: 1160 mm Installed power: 0.50 kW

240V, 50HZ, 0.75KW, 2.8A, 1420RPM FACTORY F40

Code: 0374 Brand: ITALPRESSE Model: V/4 Mechanical cold press for wood, panels, doors, furniture, composite materials, technical materials, plastics, aluminium and various other materials Working dimensions 2200 x 1000 mm Platen dimensions: n° 2 platens 1100 x 1000 mm NEW aluminium sheets Option to work on a single table or on separate tables Opening 650 mm N° 4 pressure screws N°2 motors 0,75 Hp each Overall dimensions mm 2550 x 1000 x 1650 h Weight kg 870

Veneer Saw Scheer Type FM 3 Machine No. 113462 Cutting length 3000 mm Cutting height maximum 55 mm Maximum insertion height 60 mm Saw blade diameter maximum 180 mm Saw blade on the machine diameter 150 mm Motor power 1.65 kW Feed manual Height adjustment with handwheel With rear table support 3120 mm x 600 mm Dimensions 3450 mm x 1130 mm x H 1400 mm Weight approx. 450 kg

Hydraulic veneer cutter MONGUZZI mod. 3200 used theoretical useful cut mm. 3200 nr. 2 motors installed power HP 10 Motorized rear guide with mechanical display Cutting height REER safety barrier (new) for finger detection - security level type 4 - Machine length mm. 4400 Weight kg. 3800 overhauled machine, in excellent condition CE compliant

Plate dimensions: 2.500 x 1.1250 mm Daylight opening: 300 mm Number of daylights: 1 St. Heating: Specific pressure: kg/cm² Total pressure: to Motor output: kW Dimensions (L/W/H): mm weight of the machine ca.: ca. 3 t kg Year: unbekannt Year: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Siemens high-frequency veneer and gluing press is available. Pressing force: 100t, high-frequency power: 6kW, press area X/Y: 2000mm/1200mm. An on-site inspection is possible.

Orma C4 2200×1200 veneer shelf press Shelf length 2200mm Shelf width 1200mm Maximum clearance between shelves 475mm Maximum working pressure 150bar Press on 4 cylinders 1.1kw Hydraulic Pump Motor Shelves heated with CO water Net price

The ventilation system was used to extract kitchen exhaust air. The system is weatherproof and can therefore also be installed outdoors., Additional title: Fan for air exchange, Flow capacity: 20000 m³/h, External compression: 600 Pa Total compression: 734 Pa, Fan revolution: 1160 1/min, Noise level next to the unit: 58 dB(A) in 1 m distance, Power: 5,82 kW (inkl. Frequency converter), Motor 7,5 kW, Current: Motor-electric power 16,01 A, Voltage: Motor-Voltage 3 x 400 V, Frequency: 53 Hz, Length: approx. 4070 mm, Width: approx. 1630 mm, Height: approx. 1810 mm, Weight: 1200 kg, Operation / Control: controlled via wall mounted cabinet with integrated controllers, Material: Stainless steel cabinet, Features: Fan (free spinning wheel), Frequency controller, electrical cabinet, bird protection (780 x 780)

Code: 0419 Brand: ITALPRESSE Model: V/2 Electric press for cold gluing of doors, furniture, panels, composite materials, technical materials, plastics, aluminum, various materials Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2500 x 1200 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2850 x 1200 x 1650 h Weight kg 880

This Fischer & Rückle FZR 21 was manufactured in 2015. A used veneer crossfeed splicing machine, it efficiently splices parallel jointed veneer strips into endless or component-matched veneer faces. It handles veneer strip lengths from 350 to 2150 mm and widths up to 600 mm, with a thickness range of 0.3 to 1.5 mm. Features include a semi-automatic feeding device and a horizontal pressing system for tight glue joints. For more information about this machine, please reach out to us.

Code: 0421 Brand: ORMAMACCHINE Model: NPC - CE Standard Hot press with diathermic oil heating for wood, joinery, furniture, custom-made furniture, panels, doors, composite materials and various – CE Standard Platen sizes mm 3000 x 1580 Solid steel platens with diathermic oil heating N° 6 pistons diameter 85 Opening mm 400 Platens heating by electric boiler Thrust 120 ton Guides side racks Mylar-coated platens Overall dimensions mm 3700 x 1850 x 2600 h

Code: 0120 Brand: ORMAMACCHINE Model: NPC/3000S - CE Standard Hot press with diathermic oil for wood, veneer, wood panels, coated panels, veneer, composite materials, cork, aluminium and various materials - CE Standard Platen dimensions mm 3000 x 1300 Thrust ton 70 N° 6 pistons Opening mm 400 Motor Hp 2 Heating with diathermic oil by electric boiler Mylar-coated platens Overall dimensions: mm 3600 x 1550 x 1900 h Weight kg 3500

Shelf press for veneering SIPA 2500×1280 Shelf length 2500mm Shelf width 1280mm Load height 440mm Operating pressure 120bar Press on 4 cylinders Shelves heated with boiler water

A Kuper zigzag veneer splicing machine is offered. Overhang: 1150mm, working width: 1150mm, veneer thickness range: approx. 0.3mm-3mm, feed rate: approx. 10-30m/min, feed drive power: 0.55kW, working height: approx. 980mm, machine dimensions X/Y/Z: approx. 2160mm/780mm/1650mm, weight: approx. 540kg. Documentation available. Inspection possible by appointment.

Manni 2500×1300 veneer shelf press Shelf length 2500mm Shelf width 1300mm Load height 410mm Working pressure 300bar Press on 4 cylinders Net price

Chopper, Faz Model, Manufactured by Josting

Manufacturer: Heber Manufacturer Type/Model: KG310-H58-92 Article No.: 230046-1-200-1600-0200 Machine Type: Ventilator / Centrifugal Fan Application: Supply Air (Zuluft) Total Air Volume: 3,300 m³/h Air Volume per Fan: 1,650 m³/h External Pressure Difference: 700 Pa Total Pressure Difference: 1,366 Pa Operating Speed: 3,182 rpm Maximum Permissible Operating Speed: 4,000 rpm Motor Power: 2.95 kW Motor Rated Speed: 4,000 rpm Motor Voltage: 400 V Current: 6.8 A Electrical Supply: 400 V, 3-phase Year of Manufacture: Unknown / Not stated on nameplate Manufacturer: Heber Klima- und Lüftungstechnik, Germany - It is versatile, as the corner cube can be removed, allowing for a straight configuration. - It is also suitable for outdoor installation - Suitable for operating theatres and sterilisation departments as it is a hygiene unit - Compact MSR control unit integrated (f ...

Absaugarm aus Metallrohr und wird für das Punktschweißen, Laboranwendungen und die Nebelabsaugung Ventilatoren der FUA Serie können als Direktmontagelüfter für Absaugarme Suction Arm is ideal for grinding, polishing and other types of high-dusting Operations Absaugung - Ventilator / Suction - Fan Plymovent MMH-100-15 - FUA-1300 Baujahr / Year 2007 - Serial-No. 7402 Einsatzmöglichkeiten: Punktschweißen / Spot welding Schleifen und Polieren / Grinding and polishing Laboranwendungen / Laboratory Applikation Nebelabsaugung / Mist collection

Code: 0477 Brand: EMME ELLE - ITALY Model: T.O. 3200 - CE Standard Hydraulic veneer guillotine for joinery, furniture, doors, window and door frames, slitting and other applications – CE Standard Technical data: Sturdy construction The hydraulic power unit controls the movement of the cylinders to move the pressure plate and the blade Cutting length 3220 mm Cutting height 100 mm Electrically operated rear stop – Max depth 750 mm – Min depth 20 mm Power unit pump motor 7,5 Hp Rating motor 0,75 Hp Safety photocells Weight kg 4300

Code: 0478 Brand: ITALPRESSE Model: V/2 Mechanical press for cold gluing Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2200 x 1000 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2550 x 1000 x 1650 h Weight kg 750

Code: 0479 Brand: SIPA Model: S20F Hydraulic cold press for panels, doors, furniture, timber, composite materials, engineering materials, plastics, aluminium and other materials Steel frame Platen dimensions 2500 x 1300 mm Platens opening 500 mm Total pressure 20 t N° 2 cylinders diameter 40 mm Motor power 1,5 Hp Overall dimensions mm 2800 x 1300 x 2110 h Weight kg 740

L. 2500 x B. 1300 Bürkle Veneer press 6 Column Cylinder 98 tons of pressure Heating plates Safety line Immediately available

Copper-veneer assembly machine FW/J 920-Bj.95 -Front and rear wooden pads are no longer available - Instruction manual available

Shearing Joining & Fine Blanking Machine FM18-3100 cuts wood-based materials, veneers, chipboard, fibre and plastic panels, Hard paper, foils, thin metal sheets and acrylic glass - Angular, joint-tight and splinter-free The machine has been certified by the BG "Holz" in accordance with the principles for the Testing of the occupational safety of technical work equipment examined. It bears the "GS" mark for tested safety. -Operating instructions available

pressing area: 2200mm x 1100mm; opening: 400mm; heating: electric; plate surface: ALU; Emergency stop switch: yes, ripcord; pressure: 60t; number of cylinder: 4; current consumption: 17A; machine length: 2500 mm; machine width: 1300mm; weight: 3000kg;