141,126 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Hymmen, Type: AS 260, Year: 1973, Longitudinal cutting guillotine: yes, Double knife: no, Cutting lenght mm: 2.600, Motor-driven kinfe beam: yes, Year :1973
Manufacturer: Tagliabue, Type: L 600, Year: 1998, Monting of the machine: Walze/Walze, Sanding width mm: 600, Sanding hight mm: 0,5-30, Number of sanding belts: 2, Continous adjustable feeding speed m/min: 5-20, Feeding engine kw: ca.2, Sanding belt dimensions: ca.2620 X 630, Sanding belt speed m/sec: 2 Stufig, Power belt 1 in kW: ca12, Performance in kW belt 2: ca.12, Constant table hight: yes, machine ready for demonstration: yes, Year :1998
Manufacturer: Weber, Type: K 1-1100 V, Year: 2001, Monting of the machine: Walze, Double sided sanding line: no, Sanding width mm: 900, Sanding hight mm: 100, Number of sanding belts: 1, Continous adjustable feeding speed m/min: 2 - 14, Feeding engine kw: 1,3, Sanding belt dimensions: 2.620 x 1.150, Table hight adjustment by engine: no, Rollers: 1, Power belt 1 in kW: 15, Intermediate sanding of lacquer: no, Vacuum table: 2,2, Noise enclosure: yes, Brushing unit: 0,55 kW, Year :2001
Manufacturer: Jsting , Type: PFS 1800, Year: 1964, Longitudinal cutting guillotine: yes, Pressbalkenöffung mm: ca.80, Cutting lenght mm: 1800, Schnittbreite min-max mm: 850, Working hight mm: ca.40, Alignment light: yes, Digital readout lineal guide: yes, Motor-driven kinfe beam: yes, Motorized stop adjustment mm: yes, Year :1964
Manufacturer: Josting , Type: EFS, Year: 1968, Control: hand, Longitudinal cutting guillotine: yes, Pressbalkenöffung mm: 60, Cutting lenght mm: 2800, Schnittbreite min-max mm: 500, Working hight mm: 30, Alignment light: yes, Digital readout lineal guide: yes, Motor-driven kinfe beam: yes, Motorized stop adjustment mm: yes, Knife drive: Elektro, Year :1968
Manufacturer: Fischer Rückle, Type: Omnimaster, Year: 2006, Working width mm: 1200, Veneer thickness min mm: 0,5, Veneer thickness max. min: 1,6, Feeding speed max m/min: 10-60, Feeding speed continous adjustable: yes, White glue connection: yes, Blue cooling: yes, Total power kW: ca.10, Wight approx. kg: 1500, Year :2006
cutting length: 3050mm; workpeace clamping: Handrad; suction connection: yes;
pressing area: 2500mm x 1100mm; opening: 400mm; heating: elektrisch; plate surface: ALU - Gold eloxiert; Emergency stop switch: yes; pressure: 65t; number of cylinder: 4; electricity: 22A; machine length: 3500 mm; machine width: 1300mm; weight: 3000kg;
Manufacturer: Fischer Rückle, Type: Omnimaster, Year: 2007, Working width mm: 1200, Veneer thickness min mm: 0,5, Veneer thickness max. min: 1,6, Feeding speed max m/min: 10-60, Feeding speed continous adjustable: yes, Thread heating: yes, Total power kW: yes, Wight approx. kg: ca.10, Required space L x W x H mm: 1500, Year :2007
Manufacturer: Fischer Rückle, Type: AFD, Year: 2007, Control: Programm, Double knife: yes, Cutting lenght mm: 4200, Working hight mm: 40, Alignment light: yes, Digital readout lineal guide: yes, Motorische Anschlagverstellung mm: automatisch, Hydraulically driven kinfe beam: yes, Pressure beam: yes, Wight approx. kg: 10000, machine ready for demonstration: yes, Year :2007
Manufacturer: Kleistronik, Type: KT 96000 Funiermessanlage, Year: 2005, Programm: Auswertungssoftware für Funierpakete, Funierparketvermessung: yes, Barcodedrucker: yes, Einlaufband: yes, Scanner: yes, Auslaufband : yes, Feeding speed m/min: 60, Software Auswertung: yes, Flächenermittlung: yes, Schnittstelle SAP: yes, Wight approx. kg: 500, Year :2005
thread splicer machine for veneer model KUPER FW 1150 second hand machine volt. 380/50
-) Press surface: 3,100 x 1,600 mm -) Cylinder: 8 cylinders -) Floors: 5 floors, 6 heating plates -) Heating plates: drilled 40mm steel heating plates -) Heating: for hot water or thermal oil (up to 200° -) Press opening: up to 600 mm -) Cooling: with own unit Etc.
SPECIFICATIONS: Working width: 420 mm Feed speed: 6 m/min Voltage: 230 V
HYDRAULIC PRESS with hot platens model ITALPRESSE SCF 6 second hand machine for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm.70 max. thrust Ton. 120 opening mm. 400 hydraulic pump motor power Hp 3 hot water plates heating via wood boiler weight kgs. 4500 volt. 380/50
A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible.
ESTA FILTOWER F-160 ecolight hall ventilation system was built in 2018 in Germany by ESTA Apparatebau GmbH & Co. KG. The system is designed to extract dry, oil-free welding fumes generated during metal welding. It can also be used for the ventilation of production halls, ensuring effective removal of airborne contaminants from the working environment. The ESTA FILTOWER F-160 ecolight is equipped with four cartridge filters with a total filtration area of 160 m2. The filtration system achieves an efficiency of 99,9% in class M, allowing cleaned air to be recirculated within the production hall. Contaminants accumulated on the filters are automatically removed by compressed air pulses during operation of the unit. The ESTA FILTOWER F-160 welding fume extraction system features a compact design that occupies little floor space and allows the unit to be easily relocated according to th ...
Cutting length: 3100mm, machine dimensions X/Y/Z: approx. 4800mm/1200mm/1300mm, weight: approx. 800kg. An on-site inspection is possible.
A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible.
Item Condition: In Operation Availability: immediately Availability: immediately Viewing: by arrangement Location: Germany / Essen Technical data: see picture 3
Code: 0223 Brand: ITALPRESSE Model: PHF Hydraulic press for curved veneers for processing seats, chair backs, benches, tables and other curved items Technical data: Platen dimensions mm 2600 x 1600 Opening between platens mm 1500 Thrust ton 100 Movement from bottom to top Motor power Hp 4
Dimensions (L/W/H): 4500x1500x2000 mm Weight: 6500 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Simimpianti 3500×1300 veneer shelf press Shelf length 3500mm Shelf width 1300mm Two Batches Press on 8 cylinders Shelves heated with CO water Operating pressure max 300bar Piston diameter 80mm Machine Weight 7000kg Machine dimensions 435x160x235cmH Net price 65,000zł
Dimensions (L/W/H): 2960x1500x2000 mm Weight: 4000 kg Total power requirement: 19,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3940x1620x2130 mm Weight: 5760 kg Total power requirement: 32,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3600x1650x2150 mm Weight: 6500 kg Total power requirement: 52 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 4500x1500x2000 mm Weight: 6500 kg Total power requirement: 22,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3480x1500x2000 mm Weight: 5500 kg Total power requirement: 22,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
500 € 
