vem motor used for sale

Axial fan, axial fan,axial fan VEM KMO 56 K 4 TGL11856 0,0,0 4 m3/min impeller: Ø 310 mm cage: Ø 355 mm motor: 0.12 kW 1360 rpm 220 / 380 V New ! Dimensions: 410 x 410 x 220 mm

Electro-hydraulic lifting device, linear drive, linear gearbox, lifting gearbox, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, actuator motor, actuator cylinder for rotor brake, disc brake, electro-hydraulic disc brake, crane brake, electro-hydraulic lifting device, lifting drive -Restoring force: 120 N -Power: 0.15 kW -Stroke: 50 mm -Dimensions: 417/150/H190 mm -Weight: 9 kg

Axial fan, axial tubular fan VEM, TURBOWERKE Meißen LANVR 400 TGL 0/63 2280 - 3700 m3/h 21 - 10 kp/m² impeller: Ø 395 mm inner diameter: Ø 400 mm motor: YM 63 G 4 0.32 kW 1380 rpm 220 / 380 V New ! Dimensions: 450 x 450 x 300 mm

Centrifugal fan, centrifugal fan, centrifugal fan VEM KMRB 63 K 2 TGL 11856 impeller: Ø 160 mm motor : 0,0,00 37 kW 220 / 380 V 2750 rpm IP54 flange outlet: 170 x 170 mm New !' Dimensions: 330 x 300 x 270 mm

Axial fan, Axial duct fan VEM, ILKA VAV140/50 0,0,0,0 04 m3/s 45 Pa impeller: Ø 140 mm tube inner diameter: Ø 146 mm motor: 0.025 kW 2000 rpm 220 V AC 50 Hz New ! Dimensions: 150 x 150 x 70 mm

Axial fan, axial tubular fan VEM, VENTILATORBAU OELSNITZ LAG 315 700 m3/h impeller: Ø 290 mm Mounting diameter: Ø 315 mm motor: 0.0.000 m3 07 kW 1400 rpm 220 V AC 50 Hz New !' Dimensions: 360 x 3600 x 130 mm

Axial fan VEM, TURBOWERKE Meißen LANEW 250 TGL 0/63 1210 - 1640 m3/h 16 - 5,3 kp/m² impeller: Ø 245 mm inner diameter: Ø 250 mm motor: YMa 56 K 4 0.18 kW 2760 rpm 220 / 380 V New !' Dimensions: 315 x 315 x 220 mm

Centrifugal fan, centrifugal fan, centrifugal fan VEM KMRB 56 K 2 TGL 11856 impeller: Ø 140 mm Motor : 0,0,000 mm 18 kW 220 / 380 V 2760 rpm IP54 flange outlet: 150 x 150 mm blower e.g. for forced ventilation of DC motors ! New !' Dimensions: 370 x 230 x 270 mm

Resolver with measuring gear, rotary detector VEM 1969.1 mikroma TS3C2 i = 1 : 5 shaft: Ø 10 mm flange: Ø 56 / 70 mm used, tested ! Dimensions: 160 x 130 x 110 mm

Welding Machine VEM, SCHRÖDER Welding Rectifier: RGSa 315.1 Wire Feeder: DVG 400 electronic Year: 1977 / 2001 50 - 315 A 220 / 380 V used, tested ! Dimensions: 800 x 600 x 1400 mm

Dough Portioner / Dough Weigher Year of manufacture 2005 Hopper volume 100l incl. various nozzle sizes Portioning speed up to 700 portions/min. completely stainless steel digi. Control Ink. Cutting device type 811 Compartment capacity max 200 rpm with knife (dough/sausage meat)

Vemag vacuum filler -Type: DP10E -Power: 12 kW -Filling speed: 6000 kg/h -Portion size: 5-60 000 g -Hopper capacity: 250 L -External dimensions: 2200 x 1500 x 1950 mm -Power supply: 400V 50Hz -Year of production: 2014 -Weight: 1300 kg -Condition: Used in very good condition, ready to work

Various geared motors, one with inverter: NORD electric motor 7.5 kW with parallel shaft gearbox ratio 41.94 (No.1) Geared motor MUCHNA type 63A 1.5kW n1/n2 140/18 rpm (No.2) Electric motor 18.5 kW 1460rpm VEM motors (No.3) NORD Geared Motor 11kW with Inverter and External Fan (No4) NORD Gear Motor 5.5kW n2/n1 1450/142 (No5) For prices, nameplates and further details see: kleinanzeigen.de/s-bestandsliste.html?userId=37037422

Filling machine Vemag Robot 500, Oil change vacuum pump made, without twisting gear, Connection 400V, 6.5kW, dimensions LxWxH approx. 85x60x145cm, weight approx. 410kg, used, older device, but in very good condition, fully functional

Used automatic sausage portioning and twisting (joining) machine, Vemag type LPG 208. New: 2011. Automatic sausage portioning and twisting (joining) machine, used in meat processing, which precisely twists sausages of various calibres to specific lengths, working with natural, collagen and cellulose casings, achieving very high performance (even over 2000 portions per minute). 400/460 V, 3 Ph, 50/60 Hz, 9 A, 6 kW. Dimensions: 1500 mm x 850 mm x 1300 mm.

Conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt -Thickness: 7.0 mm -Width: 39 mm -Length: 22,000 mm -Number: 1x ribbons available -Price: per piece -Weight: 6 kg

Starting resistor, series resistor, resistor -for testing large electric motors -Power: 125 A -with control cabinet -3x amps display 250 amps -(technical data see photos) -Dimensions: 720/800/H1000 mm -Weight: 128 kg

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit: with hydraulic reservoir -Hydraulic pump: pressure up to 150 bar, unfortunately without type designation -Flow rate: 12 l/min -Motor: VEM 4.0 kW / 1430 rpm -Hydraulic tank: -Individual components: see photos -Dimensions: 500/480/H700 mm -Weight: 106 kg

fan, ventilator, blower, duct fan, tube fan -Manufacturer: VEM, fan type 2N611 -Voltage: 220 V / 30 W -Fan wheel: Ø 90 x 45 mm -Dimensions: Ø 205 x 110 mm -Weight: 1.1 kg

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: VEM 3,6 kW 1430 U/min Ex protected -Fan wheel: Ø 580 x 180 mm -Connection: inlet Ø 395 mm -Connection: Output 280 x 485 mm -Dimensions: 825/670/H825 mm -Weight: 118 kg

strapping machine, strapping set, tensioning and sealing device, textile strapping set -Manufacturer: Vematec, textile strapping set 19 mm with tensioning device, unwinder, accessories -Steel reel: with 2x polyester tape width 19 x 1 mm -Staples/reel tensioners: see photos -Transport dimensions: 560/480/H480 mm -Total weight: 32.4 kg

Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Engine: VEM K11R 160 MX2 -Engine power: 15 kW / 2920 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 160 mm -Connection output: 150 x 130 mm -Base plate: 580 x 520 mm -Dimensions total: 990/810/H1055 mm -Weight: 365 kg.

Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1140 kg

Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

two-arm drill, rotary drill, magnetic drill -Recording: MK1 -Nominal power input: 400 W -Connection: 230 volts -Max. drill bit diameter: 15 mm -Weight: 7 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Drive: 3 kW -Flow rate: 30 m³/h -Max. vacuum: 50 mbar -Oil-lubricated -Speed: 1430 rpm -Dimensions: 600/450/H480 mm -Weight: 110 kg

two-armed drill, rotary drill, magnetic drill -Recording: MK3 -Nominal consumption: 1100 W -Connection: 380 volts -Max. Drill diameter: 32 mm -Dimensions: 550/560/H150 mm -Weight: 17 kg

VACUUM STUFFER, VEMAG ROBBY1, TYPE:134 Technical description: Serial number: 134 0454 Power supply: 220-380 V/ 50-60 Hz, 5.1 Kw Approx. weight: 425 Kg

Ref. №: 4018 Sausage line The line include: HP10 E type 161 Continuous vacuum filler for straight filling and portioning Machine features: All in one 250 l hopper Standard double screw Standard double screw housing Integrated CAN-bus control: Graphical display Double screw drive with 7.0 kw AC servo Infeed scroll drive with 4 kw ac motor with frequency inverter Nominal output, total: 14 kw ;21 A VEMAG lifting and tipping device for HPE with 250 l hopper To fit standard trolley, 200 l capacity VEMAG high-performance linking machine for identical lengths with casing magazine LPG 209: For linking and portioning all common types of casing in identical lengths With casing magazine for collagen, polyamide or cellulose casings For sausage calibers from 13 to 40 mm For shirred casing lengths up to 430 mm For sausage lengths from 20 mm to approx. 400 mm Nominal ...

bore capacity in steel (diameter): 32 mm throat: 300 mm bore stroke: 140 mm taper MK: 3 MK table-size: 380 x 360 mm feeds: über Handrad turning speeds: 85 - 1100 U/min total power requirement: 1,3 KW weight of the machine ca.: 0,27 t dimensions: 0,95 x 0,6 x 1,92 m Pillar drill with: - Feed via handwheel - Spindle speeds via belt drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Strapping machine, strapping kit, tensioning and sealing device, textile strapping kit -Strapping kit: with tensioning device, dispenser and staples -Band width: up to 19 mm -Staples/twist clamps: see photos -Transport dimensions: 400/390/H520 mm -Total weight: 15 kg

Functioning. The double screw is included. Vemag Robot 500 Filler is a commercial food processor designed for use in restaurants and food service establishments. With variable speed capabilities, this model allows for precise and efficient food preparation. Manufactured by Vemag, a trusted brand in commercial kitchen equipment, this robot filler is engineered to streamline processes and improve productivity in professional kitchen settings. Ideal for businesses looking to enhance their food preparation capabilities, the Vemag Robot 500 Filler offers reliability and performance in a compact design.

Filling, portioning and linking, Including 859 linker and DHV937 casing holder, Only 52 running hours!, Pump capacity: max 2300 kg/hr, Hopper: 105 litre, Vacuum pump: Busch 16 m³/h, Power: 3 x 400V, 50Hz, 5kW, Dimensions: 900 x 1200 x 1950 mm, Weight: 425 kg

A Vemag portioning and vacuum filling machine is available. 1) Vemag Robot 500 filling machine, year of manufacture: 2021, programs: 500, max. portioning speed: 450/min, portioning range: 1g-100000g, adjustment increment: 0.1g, max. conveying capacity: approx. 2800kg/h, hopper diameter: 120mm, hopper volume: 230l, max. lifting device load capacity: 250kg, operating hours: approx. 400h. 2) Piab vacuum unit, suction capacity: 21m³/h. 3) Vemag ASV 811 cutting device, year of manufacture: 2021, outlet shape: oval, arrangement: vertical, max. inclination: 20°, filling tube holder: Z design, weight: approx. 50kg. Including special nozzles in teddy shape and oval shape. Documentation vorhanden. An on site inspection is possible.

Automatic washing machine for Vemag trollies with wash and rinse section, soap dosing and automatic tote bin turner (in and out)., Capacity: 40 trolleys per hour, Heating: direct steam, Compressed air: 6 - 8 Bar, Power: 3 x 400V, 50Hz, 14.5kW, Dimensions: 11800 x 1900 x 2650 mm

intestinal holding device Vemag 841; clean; works; Dimensions LxWxH approx.: 55 x 47 x 32 cm; Weight approx.: 18 kg;

Key data: 45 °, 2600 mm, 1350 mm

Sliding table saw VEMA Type FBKS Machine No. 1367 Built in 1994 Saw blade swivel 45° Sliding carriage length 2600 mm Motor power 7.5 kW No scorer Cutting width to the right of the saw blade 1350 mm With table extension and table extension With narrow and wide extraction hood Extraction connection diameter 120 mm Speeds 4000, 5000, 6500 rpm adjustable via belt Saw blade diameter maximum 450 mm Cutting height maximum 155 mm Weight with pallet 980 kg Dimensions 2850 mm x 3500 mm x H 1400 mm Loading dimensions 2850 mm x 2000 mm x H 1600 mm

Vemag mobile sausage cutter, type: TM203, machine number: 2030987, year of construction: 2017, 400 V, 50 Hz, 3 kW, weight: 225 kg, dimensions: 700 mm x 700 mm x 1700 mm.

Vemag vacuum filling machine, model: HP 15 E, number: 1620063, year of construction: 2007, 400-460 V, 3 Ph, 50/60 Hz, 37 A, 25 kW, Busch vacuum pump, dimensions: 1280 mm x 1200 mm x 2350 mm.

Automatic dough portioner with integrated cutting device and conveyor belt Availability: as of now Condition: well-maintained, fully functional Power: 20 kW Serving capacity: up to 320 servings/min. Serving Size: 100 to 2,000 g