129,243 used machines on RESALE, but how to find them? Machine Search
Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 80 mm -Hole circle: Ø 120 x 22 mm -Number of teeth: 88 teeth -Number: 4x saw blades available -Price: per piece -Weight: 10,4 kg/piece
Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm - Bolt circle: Ø 100 x 17 mm -Number of teeth: 80 teeth -Number: 4x available -Price per piece -Weight: 5.7kg/pcs
Quill for jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Stroke: 60 mm -in: a wooden box -Dimensions: 390/340/H170 mm -Weight: 15.8 kg
Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS) Type K Module 2 2109 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 62 x 62 x 48 mm
spindle taper: MK 3 total power requirement: 4 kW weight of the machine ca.: 0,620 t Center bore grinding machine - 160 x 1000 LO - small/ large drilling/grinding length: 50/ 1000 mm - Spindle holder: MK 3 - small/ large workpiece diameter: 6/ 160 mm - Grinding head in spindle hole: 125 mm - Oscillation size: 0 to 5 mm - Oscillation double strokes: 125 / min - Speeds: 55/ 110 rpm - Connected load: 4 kW - Weight: 620 kg specification: motor. Material rotation oscillation Switch cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nominal power: 63 t stroke rate in continuous stroke: 90 min force: 2200 Nm Torque: 12500 Nm Labour performance: 5,5 kW sheet thickness - max.: 6,3 / 3,2 mm cutting surface: 1600 mm² distance between columns: 320 mm throat: 315 mm min. ram stroke: 8 mm max. ram stroke: 120 mm ram adjustment: 70 mm ram surface: 400 x 500 mm tool hole in ram: 40 mm tool shank hole (depth x diameter): 92 mm T-slots: 2 Stk total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: WMW Heckert, rotary table type D 315 k TGL 28561/02 -Clamping surface: O 315 mm -Height: 140 mm -Groove: 14 mm -Dimensions: 615/540 / H150 mm -Weight: 83 kg
Hobs, tooth gear hob for hobbing machine WMW / PWS Type K Module 2 2503 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 62 x 62 x 48 mm
bore capacity in steel (diameter): 2...20 mm throat: 210 mm bore stroke: 100 mm total power requirement: 1,1 kW weight of the machine ca.: 0,165 t dimensions of the machine ca.: m - spindle taper: MK 2 - max. drilling capacity: 2 ... 20 mm - distance center drill spindle to column : 210 mm - distance from spindle to table : 400 mm - max. stroke of spindle: 100 mm - adjustment of spindle stock 250 mm - table size: 340 x 280 mm - 4 speeds of drilling spindle: 355 ...2800 per minute - rated power: 1,1 kW - weight: 165 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Weight: 18 kg
Tool holder, milling holder, milling tool -Number: 7x SK40 mounts with tool carrier -Executions: different -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills -Sale: only complete -Dimensions: 590/120/H210 mm -Weight: 12 kg
Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 2 605 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 63 x 63 x 48 mm
Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck -Mouth size: Ø 250 mm -Recess: Ø 230 mm -Bolt circle: Ø 200 mm -Quantity: 2 available -Price: per piece -Weight: 35 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Short cone mount for: bayonet disc attachment -Cone size: 6 -Cone: Ø 106 mm -Bolt circle: Ø 133.4 mm -Through hole: Ø 54 mm -Weight: 15 kg
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -DKRD Ø: 160 mm -Weight: 15.5 kg
Hobs, sprocket hobs WMW / PWS ( WMW/PWS ) Type BP II ( BPII ) Chain pitch 9,25 rollers Ø 5 mm 9317 HSS / Co Bore Ø 27 mm New !' Dimensions: 70 x 70 x 57 mm
bore capacity in steel (diameter): / mm throat: / mm bore stroke: / mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
three-jaw chuck, three-jaw lathe chuck -Handover: in current condition as viewed -Short cone: has been shortened -Chuck size: Ø 200 mm -Through hole: Ø 54 mm -Hole: cone Ø 104.5 mm -as per pictures, without additional accessories -Weight 14.4 kg
three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 139 mm -Bolt circle: Ø 170 mm -Through hole: Ø 80 mm -Weight: 24 kg
Hobs, tooth gear cutters for hobbing machine WMW / PWS ( WMW/PWS ) Type A Module 1.5 351 HSS / Co TGL 29-8002 Bore Ø 27 mm New ! Dimensions: 85 x 85 x 40 mm
Reamer, twist drill, drill -Twist drills: different sizes on request -different manufacturers -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two-cutter -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 -Type: HSS
Bezel, steady rest, lynette -max. passage: Ø 210 mm -Centre height: 390 mm -technical drawing: in the photos -Dimensions: 600/125/H625 mm -Weight: 53.5 kg
Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed -Feed size: Ø 250 mm -Weight: 35.5 kg
3-jaw chuck, three-jaw chuck WMW DH475x3-III TGL 30 2332 outer Ø: 475 mm bolt circle (flange) Ø: 172 hole Ø: 190 mm bore (flange) Ø: 140 mm height with jaws: 195 mm max. 800 rpm used, tested ! Dimensions: 475 x 475 x 195 mm
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Feed size: Ø 200 m -Through hole: Ø 54 mm -Weight: 12 kg
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -TGL: 30-2312 -Weight: 11.2 kg
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: 200x3-III -TGL: 30-2332 -Chuck size: Ø 200 mm -Weight: 16.7 kg
3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW TGL 30-2312 Outer Ø: 200 mm Bolt circle Ø : 150 mm Flange Ø : 180 mm Height with jaws: 153 mm Jaws individually adjustable by toothing ! used, tested !' Dimensions: 200 x 200 x 250 mm
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: B200x3x6 -TGL: 30-2332 -Chuck size: Ø 200 mm -Cone: Ø 104 mm -Hole circle: Ø 132 mm -Through hole: Ø 54 mm -Weight: 15 kg
Alignment pin set WMW D 45 ( D45 ) 751 82 453 10 SK 45 Spigot: Ø 40 mm Dimensions: 177 x Ø 58 mm Set consists of 2 pieces ! New !' Dimensions(Packing): 260 x 120 x 90 mm
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Mounting thread: M20 -Gradient: 2.5 mm -Weight: 32 kg
Tool holder, reducing sleeve for MK tools WMW C 45 x 5 x 185 ( C45x5x185 ) TGL 27260 SK 45 Tool: MK 5 Dimensions: 268 x Ø 80 mm New !' Dimensions(Packing): 290 x 120 x 110 mm
WMW HECKERT FU450R-51 universal milling machine was built in 2009 in Belarus by Gomel Machine Tool Plant S.M. Kirov.. This extremely versatile, functional and reliable machine is designed for precision machining of workpieces with a maximum weight of 1500 kg. The machining process is performed by a powerful spindle on a large work table. T-slots in the table allow for quick installation of additional tooling such as a vice. The precision and repeatability of the manufactured parts, in turn, is maximised by the design made of the highest quality cast iron, which maintains excellent stability during even the most intensive challenges. All this makes the offered FU450R conventional milling machine an excellent choice for both unit and series production. The WMW HECKERT vertical milling machine weighs 4300 kg. Technical specifications of the WMW HECKERT FU450R-51 milling machine - number ...
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess: Ø 210 mm -Passage: Ø 80 mm -Weight: 20.7 kg
Boring tool, special accessory WMW TGL 32680 ( TGL32680 ) TGL 30-1201 shank: Ø 20 mm adapter: Ø 8, 10, 12 mm in wooden box used, tested ! Dimensions: 185 x 120 x 60 mm
Feed rate: 250mm/min, speed: 2800rpm, tool diameter: 200mm, weight: approx. 850kg. An on-site inspection is possible.
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Short taper: 6 -Throughout: Ø 80 mm -Weight: 25.9 kg
Milling cutter mandrel , tool holder, with tightening thread WMW 4 x 25 x 160 ( 4x25x160 ) TGL 30-4113 MK4 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 490 x 45 x 45 mm
Key data: 50 mm, 335 mm, 280 mm
Power: 7.8 kW Weight: 1,650 kg Table size: 630 x 500 Speed: 45 - 1,000 rpm Machine is ready for operation and can be dispensed immediately.
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Admission thread: M40 -Pitch: 1.5 mm -Rezess: Ø 180 mm -Weight: 22.5 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Feed size: Ø 200 m -Through hole: Ø 54 mm -Short cones: 5 -Bolt circle: 105 mm -Weight: 16.2 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -threaded mounting -Through hole: Ø 53 mm -Weight: 19.7 kg
Cutter mandrel , tool holder, with tightening thread WMW 4 x 25 x 80 ( 4x25x80 ) TGL 30-4113 MK4 shaft diameter: Ø 16 mm Tool holder: Ø 25 mm New ! Dimensions: 300 x 45 x 45 mm
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess inlet: Ø 210 mm -Through hole: Ø 80 mm -Weight: 18 kg
Milling cutter mandrel, tool holder, with tightening thread WMW 3 x 25 x 160 ( 3x25x160 ) TGL 30-4113 MK3 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 425 x 45 x 45 mm
maximum number of results exceeded
please refine your search
