vdi 60 used for sale

Position sensor, inductive series position sensor BALLUFF BNS 816-83-THA-16-602-11 New ! Dimensions: 150 x 95 x 100 mm

Clamping plate, clamping table, machine table LID Working area: 600 x 430 mm for KF12 Panel thickness: 25 mm Groove width: 12 / 21 mm used ! Dimensions: 600 x 430 x 60 mm

Spindle, Machine Spare Part EX-CELL-O GmbH Type 65.607.5. Serial No.: G 005522 Speed: max 320 rpm Shaft diameter: Ø 50 mm New ! Dimensions: 525 x 155 x 185 mm

Submersible pump, coolant pump, emulsion pump, BRINKMANN TA 600/360+001 immersion depth: 360 mm pump base: Ø 140 mm Pump flange: Ø 180 mm Q = 500 l/min H = 2 m motor: 1,1,00 mmbr /br /Q = 500 l/minbr /br /H = 2 mbr /br /motor: 1,180 mmbr /br /Q = 500 l/minbr /br /H = 2 mbr /br / 1 kW 220/380 V used, tested ! Dimension: 610 x 210 x 180 mm

Submersible pump, coolant pump BRINKMANN STA 607/670-Z+280 immersion depth: 670 mm Pump base: Ø 140 mm Pump flange: Ø 180 mm Q = 400 l/min H = 45 m Motor: 7,10 5 kW 500 V New !' Dimension: 1150 x 400 x 290 mm

Cooler, Heat Exchanger, Oil Cooler PAGUS New ! Dimensions: 600 x 700 x 200 mm

Control cabinet, baying system TS 8 RITTAL TS 8451.600 ( TS8451.600 ) 1200 x 600 x 2200 mm 2 doors without side walls can be combined with S377 4-, 6- or 8-door stainless steel - control cabinet Dimensions: 1200 x 600 x 2200 mm

Control cabinet, control cabinet BERNSTEIN CC-4000 694x596x280 ( CC-4000694x596x280 ) 1564100057 suitable for EL731 ! used, tested ! Dimensions: 700 x 600 x 290 mm

Control cabinet, baying system TS 8 RITTAL TS 8451.600 ( TS8451.600 ) 1200 x 600 x 2200 mm 2 doors one side wall can be combined with S376 4-, 6- or 8-door stainless steel - control cabinet Dimensions: 1200 x 600 x 2200 mm

DC Tachogenerator VEM Type: 1632.1 6000 rpm 100 V Dimensions 23x17x17

Control cabinet, PC cabinet, control cabinet PAGUS 1980 x 820 x 600 mm with keyboard drawer in the writing desk and 2nd drawer installation option for PC and monitor stainless steel - control cabinet Dimensions: 1980 x 820 x 600 mm

Stir-up grip pliers ELORA 507-600S span 400 mm with quick-release lever drop-forged, nickel-plated jaws chrome vanadium New ! Dimensions: 640 x 180 x 70 mm

angle grinders, high-frequency tools, high-frequency machines BOSCH 0 602 306 001 0.95 KW 1100 rpm 265 V 200 Hz connection cable approx. 4 m used, tested ! untested ! Dimensions: 600 x 300 x 150 mm

angle grinder, high-frequency tool, high-frequency machines BOSCH 0 602 306 001 0.95 KW 1100 rpm 265 V 200 Hz connection cable approx. 7 m used, tested ! untested ! Dimensions: 600 x 350 x 150 mm

Drill, High Frequency Tool, High Frequency Machines BOSCH 0 602 118 001 0.36 / 0.42 KW 200 / 265 V 150 / 200 Hz connection cable approx. 3.5 m used, tested ! Dimensions: 450 x 300 x 90 mm

Drilling machine, high-frequency tool, high-frequency machines BOSCH 0 602 102 001 0.16 / 0.2 KW 2300 / 3300 rpm / 200 / 265 V 150 / 200 Hz connection cable approx. 2.8 m used, tested ! Dimensions: 350 x 200 x 70 mm

Deep groove ball bearing, single row ZKL 6007 C3 version: C3 d = Inner = 35 mm D = Outer = 62 mm B = Width = 14 mm welded individually packed Minimum order value 50,- �

Deep groove ball bearings, DKF 6202 ( 10 pieces ) d = Inside = 15 mm D = Outside = 32 mm B = Width = 9 mm Price for 10 pieces ! for larger quantities, please ask for prices Minimum order value 50,- €

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 2 605 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 63 x 63 x 48 mm

40 cut plates with 13 rails Total price Bakery condition Different insertions

PVC PROFILE EXTRUSION LINE EVC BRAND, single screw extruder with 60 mm 28 LD, constructed in 1998, for 180 mm max width, 44 kw drive, control panel, Calibrating desk 3,7 m.long with 1 x 9 kw.pump, Caterpillar pull off unit, 180 mm wide, saw, 6,0 mt.long discharging table.

Cold storage wagon 60x40 with 14 stainless steel sheets LxWxH: 60x45x160cm 14 rails used

TECNOVA RECYCLING EXTRUDER, for PE PP PS PC ABS, Barrel with 130 mm screw 54 L/D, as new screw and barrel, n.2 degassing pumps for slightly moist or heavy prints, hydraulic screenchanger, hydraulic pack, water ring pelletizer, drying centrifuge, electric cabinet for complete management of the line, in need of reconditioning, capacity: 500-600 kg/h, conditions: reconditioning needed, type: 130 mm. 54 L/D 2xdegassing points 500-600 kg/h nominal throughput rate

Dimension tank Height 6,850mm Width 3,450mm , main hole 750mm safety rail 1000mm Angle Helical Bevel Gear mtor 5hp 1:60rpm Location of tank still at SATHAAN ENGINEERING supplier Songkhla. Commercial 1. Ms.Supawadee (supawadee@greatglove.com) 2. Ms.Wilawan (wilawan_sakul@greatglove.com)

1-deck swashscreen (expandable to 2 decks) with a screening area of 1.80 m²/deck, drive 4.0 kW via V-belt (engine renewed). Including 1 pc. sieve insert (not strung; stainless steel blank).

USED VERTICAL MIXER, 24 m3 capacity, total height approx 5.400 mm including transmission group + cyclon, max Ø 2.800 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter,, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, electric voltage: 400 V, 50 Hz,, conditions: good working conditions, availability: immediate, width: 2800 mm. special transport

GRANULATION AND SEPARATION PLANT, Capacity up to 600 kg/h (see below list), separation surface 750 x 375 mm, Vibratig ytable with a 0.750 kW drive, Blower - 0.750 kW drive, Total drive power 1,5 kW, Weight 380 kg, Processing capacity in kg/h approx. :, CU - Solid cable 500, CU - Stranded cable 250, AL - Cable 300, CU - Granulate 600, CU/AL - Radiator scrap 600, Electronic scrap 250, Various plastics 300, Tyre rubber 300, installed power - used power in work: about 60-65% : 1,5 kW, availability: 1 month approx, capacity: up to 600 kg/h, conditions: new equipment, SPECIAL FEATURES: spares usually available in stock - no downtime, CONSIDERATIONS: Ideal to start a profitable recycling business from scraps

EdmoLift WP 85 Electric Lift 85 kg Loading Area 60x47 cm 24V Made in Sweden, the WP by Edmolift series electric lift is designed to give the operator the ability to easily lift, transport and position heavy objects – all in perfect ergonomic conditions. The powerful electric lifts of the WP by Edmolift series have many uses, while the design of the lifts brings unbeatable mobility and ergonomics. The WP by EdmoLift series is one of the most universal and solid electric lifts on the market, which can be easily adapted to your needs. Manufacturer: EdmoLift Model No.: WP 85 Type: Electric Lift Load capacity: 85 kg Net weight: approx. 38.5 kg Dimensions: 73.5 cm long, 60 cm wide and 160 cm high Loading area: 60 cm wide and 47 cm long Lifting time: approx. 19 sec Battery: 24 V or 7.2 Ah Charger: 230 V or 1.5 A max. platform height 144 cm Minimum he ...

EdmoLift WP 85EM Electric Lift 80 kg Loading Area 60x47 cm 24V Made in Sweden, the WP by Edmolift series electric lift is designed to give the operator the ability to easily lift, transport and position heavy objects – all in perfect ergonomic conditions. With a lifting capacity of up to 200kg, the powerful electric lifts of the WP by Edmolift series have many uses, while the design of the lifts brings unbeatable mobility and ergonomics. With the many accessories available, the WP by EdmoLift series offers you the most universal and solid electric lifts on the market, which can be easily adapted to your needs. Manufacturer: EdmoLift Model No.: WP 85EM Serial Number: 125512 Type: Electric Lift Load capacity: 80 kg Net weight: approx. 40.5 kg Dimensions: 79.5 cm long, 60 cm wide and 192 cm high Loading area: 60 cm wide and 47 cm long Lifting time: approx ...

Motor power: 45 kW Nominal flow rate: 7.5 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 1500x1000x1265 mm Estimated weight: about 700 kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-4

Equipment: Insulation, agitator,Manufacturer: Ahlborn,Condition: used,Volume: 60,000,Bottom floor: flat bottom with slope,Top floor: conical bottom,Design: upright,Insulation: available,Diameter inside: 3,500,Diameter outside: 3,610,Cylindrical height: 6,500,Total height: 7,200,Manhole / dome: in cylinder,Type plate: No,Equipment: Ventilation/venting, spray head, crane eyes,Outlet: present,Outlet : 80,Remarks: Container feet are spacers for the substructure/foundation. Inside small repair points,last use: foodstuffs,material in contact with the product: V2A 1.4301

Equipment: Insulation, agitator,Condition: used,Volume: 60,000,Bottoms: conical bottom,Design: upright,Standing form: Stand frame,Insulation: available,Diameter inside: 3,700,Diameter outside: 3,880,Total height: 9,200,Manhole / dome: in cylinder,Nameplate: No,Equipment: Ventilation/venting, spray head, crane eyelets,Last use: Foodstuff,Material in contact with the product: V2A 1.4301 (AISI304),Agitator: Beam stirrer,Bottom bearing: Yes,Current interferer: No,Agitator arrangement: eccentric in the topsoil,floor bearing: no,power interferer: no

Equipment: Insulation,Condition: used,Volume: 60,000,Lower floor: flat bottom,Design: standing,Standing form: Standing frame,Insulation: available,Insulating sheath: riveted,Insulation material: Rock wool,Material insulating jacket: Steel,Insulation thickness: 100,Diameter inside: 2,870,Cylindrical height: 9,750,Total height: 10,500,Manhole / dome: in the cylinder, in the top floor (DN 500),Type plate: No,Equipment: crane eyelets,Outlet: available,Outlet : 65,Note: slight adhesions, Remarks: slight residues inside, insulating sheath in the top floor damaged, last use: softened

Equipment: Insulation, agitator,Condition: used,Volume: 60,000,Lower floor: flat bottom with slope,Design: upright,Standing shape: flat bottom,Insulation: available,Insulating sheath: hermetically welded,Material insulating jacket: stainless steel,Diameter inside: 3,500,Cylindrical height: 6,500,Total height: 7,200,Manhole / dome: in cylinder,Nameplate: No,Equipment: Ventilation/ventilation, crane eyelets,Outlet: available,Outlet : 80,Remarks: Container feet are spacers for the Substructure/foundation,last purpose: foodstuffs,material in contact with the product: V2A 1.4301 (AISI304),agitator:

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roll width: 600 mm -Conveying length: 1850 mm -Diameter roller: 60 mm -Center distance: approx. 140 mm -driven: via chain -Geared motor: 0.37 kW 35 rpm -Roll speed: 9.4 m/min -Dimensions: 2000/900/H400 mm -Weight: 114 kg

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Forbo Siegling, Conveyor belt type E 12/2 EO/E3 MT-TT TRANSPARENT -Width: 600 mm -Length: 2400 mm -Quantity: 1 conveyor belt available -Dimensions: 600/230/H180 mm -Weight: 2.8 kg

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table -Manufacturer: Platten, scissor lift table type 6.0 T/F/A -Load capacity: 6000 kg -Platform: approx. 1740 x 1280 mm -Dimension when retracted: Height 975 mm -Extended dimension: Height 1390 mm -Hydraulic unit: Kunz/Elmot 1.5 kW / 180 bar -Transport dimensions: 1740/1280/H1985 mm -Empty weight: 1270 kg

Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: Nord, gear motor with brake -Gearbox: Type SK 3080A F i= 4.59 -Speed: 600/61 rpm -Engine: SSB Type 05-0410.208.50-K1 -Power: 0.75 kW -Protection class: IP44 -Hollow shaft: Ø 35 x 115 mm -Dimensions: 400/370/H175 mm -Weight: 32 kg

KUHN ESPRO 6000 R – Pneumatic seed drill (new machine, YOC 2023) Powerful 6 m seed drill for efficient sowing using mulch and no-till methods. High area performance with precise seed placement. Technical data • Manufacturer: KUHN • Model: ESPRO 6000 R • Year of construction: 2023 • Working width: 6.00 m • Transport width: 3.00 m • Number of rows: 40 • Row spacing: 15 cm • Tank volume: 3,500 l • Weight with seed harrow: approx. 8,000 kg • Filling height: approx. 2.50 m • Working speed: 7–17 km/h • Required tractor power: 200–350 hp • Hydraulics: 2 × PE + 1 × free return • Electrical: 7-pin plug Technology & Equipment • Crossflex seeding elements with hydraulic coulter pressure and sowing depth adjustment • Offset seed discs • 48 machining discs in 2 rows • 20 tire packers (900 × 215) • Central, volumetric  ...

KRONE EasyCollect 600-2 FP maize header Robust and powerful maize header with a working width of 6.0 m, developed for use in the field regardless of rows. The machine is in perfect technical condition. All hydraulic, mechanical and drive functions run cleanly, precisely and reliably. After-sales service and all oils freshly changed. Suitable for e.g. Claas Jaguar from 494. Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions.com Phone: +49 151 55771219 Auction-ID: A7-45490-20

Lemken Heliodor 9/600 – 6.0 m compact disc harrow (year 2022) General data • Machine type: Compact disc harrow • Manufacturer: Lemken • Model: Heliodor 9/600 • Year of construction: 2022 • Working width: 6.0 m • Transport width: approx. 3.0 m • Design: semi-mounted, hydraulically foldable • Condition: used, very good Technical equipment • Serrated discs for intensive soil cultivation • Working depth: up to approx. 12 cm, infinitely adjustable • Double roller as back-up • Hydraulic folding for road transport • Robust frame construction • Stone safety for use on heavy soils • Power requirement: from approx. 200 hp Condition • Visual condition: very well maintained, hardly any signs of wear • Technical condition: perfect, ready for immediate use • Few operating hours, regularly serviced • Windows and paint in very good ...

Allimex Allislide Mid Clamp 6 boxes with 100 pieces Auction-ID: A1-44832-63

3 Phase 16 amps IP55 LED Internet connection maximum charging capacity 11KW Auction-ID: A1-44832-812

3 Phase 16 amps IP55 LED Internet connection maximum charging capacity 11KW Auction-ID: A1-44832-816

End clamp Allimex Allislide 6 boxes with 100 pieces Auction-ID: A1-44832-58

37 x 15 W RGBW with 8° - 63° zoom range capable of generating rainbow effects and tungsten lamps with pre-programmed whites. Includes 4-inch flight case Auction-ID: A1-45485-7

Clean CUT SA-600 Wire EDM & Eroding Machine Type: Wire EDM and eroding machine Manufacturer: Clean CUT Model: SA-600 Year of manufacture: 2001 X-axis travel: 610 mm Y-axis travel: 630 mm Z-axis travel: 350 mm Dimensions: approx. 1900 x 1900 x 2700 mm Table: 950 x 500 mm Transport dimensions: approx. 1900 x 1900 x 2700 + 1 pallet Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-10

37 x 15 W RGBW with 8° - 63° zoom range capable of generating rainbow effects and tungsten lamps with pre-programmed whites. Includes 4-inch flight case Auction-ID: A1-45485-6