vat used for sale

Sychron motor with ball screw, MDD115C-N-015-N2M-130GB0, Rexroth, mint condition Special price ! High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue an invoice without VAT As good as new with minor traces of storage! The assembled linear actuator comes from a spare parts warehouse of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor traces of storage. Technical data: 1 complete linear actuator, 181x29x20cm, ca. 150kg, consisting of: - 1 pc Sychnron motor MDD115C-N-015-N2M-130GB0, R911262636, from Rexroth, permanent magnet motor, max. 75Nm, 1500rpm, 52kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc. ball screw 1516.339/10.63.1033.1276 P3, Fa. Steinmeyer, D63mm, total length of the screw ap ...

Sychron motor with ball screw, MDD115C-N-015-N2M-130GB2, Rexroth, mint condition Special price High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new with traces of storage! The assembled linear actuator comes from a spare parts store of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor storage traces. Technical data: 1 complete linear actuator, 169x29x20cm, ca. 150kg, consisting of: - 1 pc Sychnron motor MDD115C-N-015-N2M-130GB2, R911262637, from Rexroth, permanent magnet motor, max. 75Nm, 1500rpm, 55kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.310/10.63.848.1091 P3 D63mm, total length of the screw approx. 1090mm, thread ...

Mini excavator XN12 Rhinoceros 3 Zyl. Kubota 10,2kW articulated arm NEW Description Articulated arm/Knickmatic incl. Bucket 400 mm -Roof and roll bar Tool -Hammer cable -Work lights Optional: Mech. Quick coupler with 2 bolts : 260 Euro Bolt for quick coupler : 10 Euro Fang : 210 Euro Mech. Gripper : 320 Euro Rake : 210 Euro hydr. Hammer : 1780 Euro hydr. Earth drill : 680 Euro hydr. Bucket 600mm : 520 Euro hydr. Bucket 800mm : 590 Euro Load hook : 170 Euro Bucket 200mm : 205 Euro Bucket 400mm : 270 Euro Bucket 600mm : 310 Euro Bucket 800mm : 340 Euro Sale is made with invoice with VAT shown. 19% VAT included in the price. 015121271265 Model XN12 Fire RHINOCEROS Operating Weight 1080kg Digging bucket capacity 0.025cbm/120kg Digging bucket width 380mm Engine Kubota Rated power 10.2kw/2200 rpm Displacement 0.85 ...

Machine Details Stock number 1105-03735 Machine type CNC lathe Brand MAZAK Type QT 20 N Year of construction 1995 Control type CNC Control Mazatrol T PLUS Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from site Technical details Turning diameter 440 mm Turning length 451 mm Control Mazatrol T PLUS Turning diameter via bed carriage 300 Tailstock holder MK 4 Quill stroke 130 mm Tailstock displacement 500 mm x-axis 180 mm z-axis 510 mm Spindle bore 62 mm Speed range 12-4500 rpm Total power requirement 40 KVA Machine weight ca. 4,2 t Information WITH MAZATROL T PLUS Good Macschine All prices plus VAT. VAT.. Changes and errors in the technical details and information reserved.

Diesel tank - 1000 liters - Double-walled - As good as new condition - Completely cleaned - Stackable - - - - - Dispatch: - A Germany-wide transport is possible for an extra charge - To be able to give an exact freight price please send me a request with your zip code - - - - - Price: - 1.000,- € + 19 % VAT = 1.190 € - An invoice with VAT will be issued - Payment: Prepayment - - - - - Other: - Sale of used machines in the actual state to traders without warranty

Sychron motor with ball screw, MDD112D-N-030-N2M-130GB2, Rexroth, mint condition Special price High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new with traces of storage! The assembled linear actuator comes from a spare parts store of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor storage traces. Technical data: 1 complete linear actuator, 185x26x28cm, ca. 250kg, consisting of: - 1 pc Sychnron motor MDD112D-N-030-N2M-130GB2, R911260224, from Rexroth, permanent magnet motor, max. 75Nm, 3000rpm, 62kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.78/10.80.910.1189 P3 D80mm, total length of the screw approx. 1189mm, thread  ...

Bevel gear motor, G50BB124MHAR2C, 401r/min, 68Nm, Lenze, mint condition If you have a VAT number, we will gladly issue an invoice without VAT. As good as new! The part was disassembled from a new unit that was not put into operation. - Bevel gear motor G50BB124MHAR2C, 401r/min, 68Nm, I=3,565 - Motor MDEMABS100 32C0C, 0,55KW, 1430r/min, - Bore for shaft D30mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Scania emergency generator set 365 / 400 kVA NEW - Year of construction 2023 - - - - - Engine: - Scania (Sweden) - Model: DCI13 - 6 cylinders -Diesel -Water-cooled - 1500 rpm - Power: 435 hp - - - - - Generator: - Leroy & Somer (France) - 365 / 402 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / switching unit: - Digital starter unit with display - with automatic start function - Generator monitoring: volts, amps, hertz, hydrocarbons - Motor monitoring - - - - - Other data: - Dimensions: 456 x 196 cm - Weight: 4550 kg - Tank volume: 990 liters - Sound level: approx. 67 dB +/- (7m) - Fuel consumption: 36.5 l/h (50%) / 52.6 l/h (75%) - - - - - Scope of delivery: - Scania generator set 365 / 400 kVA - in soundproofed housing - with start-up unit / controller -Tank -Battery - Exhaust / silencer - - - - - Price a ...

Lister generator set 15 kVA with starter unit - - - - - Engine: - Lister (English manufacturer of industrial engines) - 4 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford (England) - 15 kVA - 230 / 400 volts - 50 Hertz - AVR - - - - - Control box / starter unit: - Ignition lock for starting - Volt display - Hertz display - Ampere display - Battery voltage indicator - Operating hours counter: 5600 hours - - - - - Condition: -Used - The device was used for emergency protection and for occasional use - A test run with load reduction was made - The engine runs well - The generator generates 400 volts and 50 hertz - - - - - Scope of delivery: - Lister generator set 15 kVA - with starter unit - - - - - Transport: - A Germany-wide transport incl. unloading is possible for an extra charge - To ...

Deflection unit for slat-band conveyors, Versaflex, A06EM, 65mm, MK, mint condition -50% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The part was installed in a new plant, which was not put into operation, has minor signs of storage or installation, but is in mint condition. We have the following individual parts for Versaflex hinge conveyors from MK Group in stock: (Please contact me) - Deflection units A06EM, 65mm wide - Guide profile A06P-3, 65mm wide incl. glide bars - Link chain, smooth chain white, A06CH, 63mm, - Drive units with gear motors Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a ...

Guide profile for slat-band conveyors per m, Versaflex, A06P-3, 65mm, MK, mint condition -40% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Guide profile, guide rail 65mm wide, 4 pieces 300cm long, 4 pieces 131cm long, 4 pieces 235cm long Material aluminum Incl sliding strips ASL-25-0 HDPE black As good as new! The part was installed in a new plant, which was not put into operation, has minor signs of storage or installation, but is in mint condition. We have the following individual parts for Versaflex hinge conveyors from MK Group in stock: (Please contact me) - Deflection units A06EM, 65mm wide - Guide profile A06P-3, 65mm wide incl. glide bars - Link chain, smooth chain white, A06CH ...

Smooth chain for slat-band conveyors per m, Versaflex, A06CH, 63mm, MK, mint condition -40% Smooth chain, link chain, white, 63mm wide, Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The part was installed in a new plant, which was not put into operation, has minor signs of storage or installation, but is in mint condition. We have the following individual parts for Versaflex hinge conveyors from MK Group in stock: (Please contact me) - Deflection units A06EM, 65mm wide - Guide profile A06P-3, 65mm wide incl. glide bars - Link chain, smooth chain white, A06CH, 63mm, - Drive units with gear motors Functional guarantee! We cannot provide a conventional guarantee and warr ...

approx. 100.11 m tire racks META, tire rack, wheel racks, workshop rack, storage racks, immediately from stock Data: H : approx. 200 cm D : approx. 40 cm L : approx. 100,11 running meters Shelf offer 100,11 running meters ( 87 fields ) consisting of: 88 x stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 522 x traverse approx. 115 cm. 1044 x tapping screw 4.8 x 13. Manufacturer: META. Load: 150 kg per compartment, with evenly distributed load. Levels: 3 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 7350,00 € net plus legally valid VAT You will receive an invoice with VAT.

New Deutz BF4M1013EC. This engine has been converted into various machines if you are looking, we have it this Deutz BF4M1013EC. If this is not the type you are looking for, please do not hesitate to contact us. We have the possibility to supply various types of Deutz engines new, used or overhauled with appropriate software and in the configuration according to the engine number specified by you. Feel free to contact us to discuss things with each other., , = More information =, , Year of manufacture: 2022, Model year: 2022, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Damages: none, VAT/margin: VAT qualifying, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses , co ...

approx. 34.56 m tire racks META, tire rack, wheel racks, workshop rack, storage racks, immediately from stock Data: H : approx. 200 cm D : approx. 40 cm L : approx. 34,56 m Shelf offer 34,56 running meters ( 30 fields ) consisting of: 31 x stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 180 x traverse approx. 115 cm. 360 x tapping screw 4.8 x 13. Manufacturer: META. Load: 150 kg per compartment, with evenly distributed load. Levels: 3 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 2637,00 € net plus legally valid VAT You will receive an invoice with VAT.

approx. 69.06 running metres Tyre racks META, tyre racks, wheel racks, workshop racks, storage racks, immediately from stock Data: H : approx. 200 cm D : approx. 40 cm L : approx. 69,06 running meters Shelf offer 69,06 running meters ( 60 fields ) consisting of: 61 x stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 360 x traverse approx. 115 cm. 720 x tapping screw 4.8 x 13. Manufacturer: META. Load: 150 kg per compartment, with evenly distributed load. Levels: 3 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 5247,00 € net plus legally valid VAT You will receive an invoice with VA ...

approx. 15 running metres Tyre racks META, tyre racks, wheel racks, workshop racks, storage racks, immediately from stock Data: H : approx. 200 cm D : approx. 40 cm L : approx. 15 running metres Shelf offer 15 running meters ( 13 fields ) consisting of: 14 x stand approx. 200 x 40 cm, disassembled (incl. 2 x foot & 2 x cover cap). 78 x traverse approx. 115 cm. 156 x tapping screw 4.8 x 13. Manufacturer: META. Load: 150 kg per compartment, with evenly distributed load. Levels: 3 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1158,00 € net plus legally valid VAT You will receive an invoice with VAT.

approx. 5.80 m tire racks META, tire rack, wheel racks, workshop rack, storage racks, immediately from stock Data: H : approx. 200 cm D : approx. 40 cm L : approx. 5,80 m Shelf offer 5,80 running meters ( 5 fields ) consisting of: 06 x Stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 30 x traverse approx. 115 cm. 60 x tapping screw 4.8 x 13. Manufacturer: META. Load: 150 kg per compartment, with evenly distributed load. Levels: 3 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 462,00 € net plus legally valid VAT You will receive an invoice with VAT.

100,06 m shelving racks, 40cm deep , Workshop shelves , Storage racks , Hand storage , Plug-in racks , Small parts warehouse Data: H : approx. 200 cm D : approx. 40 cm L : approx. 100,06 running meters Shelf offer 100,06 running meters consisting of: 101 x stand approx. 200 x 40 cm, disassembled (incl. 2 x foot & 2 x cover cap). 500 x floor approx. 100 x 40 cm. 2000 x shelf holders. 101 x diagonal 1176 mm ( for crossing ). 101 x turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 11.000,00 € net ...

60,06 m shelving racks, 40cm deep , workshop shelves , storage racks , manual storage , plug-in racks , small parts warehouse Data: H : approx. 200 cm D : approx. 40 cm L : approx. 60,06 running meters Shelf offer 60,06 running meters consisting of: 61 x stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 300 x floor approx. 100 x 40 cm. 1200 x shelf holders. 61 x diagonal 1176 mm ( for crossing ). 61 x turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 7000,00 € net plu ...

10,06 m shelving racks, 40cm deep , workshop shelves , storage racks , manual storage , plug-in racks , small parts warehouse Data: H : approx. 200 cm D : approx. 40 cm L : approx. 10,06 running meters Shelf offer 10,06 running meters consisting of: 11 x stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 50 x base approx. 100 x 40 cm. 200 x shelf holders. 11 x diagonal 1176 mm ( for crossing ). 11 x turnbuckle (for crossing). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1241,00 € net plus leg ...

Variable area flow meter for heat transfer oil, H250/RR/M40/HAT/ESK, Krohne, new -60% Special price ! The current price of a similar product is about € 2100 excluding VAT. If you have a UID number, we will gladly issue an invoice without VAT. We still have several identical units, but the quantity is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely as new and in the original packaging. Technical data: - For heat transfer oil with 860 kg/m³. - Viscosity 1.23 mm²/s - Working temperature: 200°C - Working pressure: 5,0 bar - Measuring range 0-25 l/min - Connection G1 - Output signal 4 - 20mA - Made of stainless steel 316 - Max. working pressure: 70 bar - Max. Temperature: 300°C Function guarantee! For sec ...

5,06 m shelving racks, 40cm deep , Workshop shelves , Storage racks , Hand storage , Plug-in racks , Small parts warehouse Data: H : approx. 200 cm D : approx. 40 cm L : approx. 5,06 m Shelf offer 5,06 running meters consisting of: 06 x Stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 25 x floor approx. 100 x 40 cm. 100 x shelf holders. 06 x diagonal 1176 mm ( for crossing ). 06 x Turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 636,00 € net plus legally valid VAT  ...

30,06 m shelving racks, 40cm deep , workshop shelves , storage racks , manual storage , plug-in racks , small parts warehouse Data: H : approx. 200 cm D : approx. 40 cm L : approx. 30,06 m Shelf offer 30,06 running meters consisting of: 31 x stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 150 x floor approx. 100 x 40 cm. 600 x shelf holders. 31 x diagonal 1176 mm ( for crossing ). 31 x turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 3661,00 € net plus legally vali ...

2,06 m shelving racks, 40cm deep , Workshop shelves , Storage racks , Hand storage , Plug-in racks , Small parts warehouse Data: H : approx. 200 cm D : approx. 40 cm L : approx. 2,06 m Shelf offer 2,06 running meters consisting of: 03 x Stand approx. 200 x 40 cm, disassembled (incl. 2 x stand & 2 x cover cap). 10 x floor approx. 100 x 40 cm. 40 x shelf holders. 03 x diagonal 1176 mm ( for crossing ). 03 x Turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 273,00 € net plus legally valid VAT Y ...

100,06 running meters shelf racks, 60cm deep , workshop shelves , storage racks , manual storage , plug-in racks , small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 100,06 running meters Shelf offer 100,06 running meters consisting of: 101 x stand approx. 200 x 60 cm, disassembled (incl. 2 x stand & 2 x cover cap). 500 x floor approx. 100 x 60 cm. 2000 x shelf holders. 101 x diagonal 1176 mm ( for crossing ). 101 x turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price:  ...

10,06 running meters shelf racks, 60cm deep , workshop shelves , storage racks , manual storage , plug-in racks , small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 10,06 running meters Shelf offer 10,06 running meters consisting of: 11 x stand approx. 200 x 60 cm, disassembled (incl. 2 x foot & 2 x cover cap). 50 x base approx. 100 x 60 cm. 200 x shelf holders. 11 x diagonal 1176 mm ( for crossing ). 11 x turnbuckle (for crossing). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1422,00 € net  ...

60,06 m shelving racks, 60cm deep , workshop shelves , storage racks , manual storage , plug-in racks , small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 60,06 running meters Shelf offer 60,06 running meters consisting of: 61 x stand approx. 200 x 60 cm, disassembled (incl. 2 x stand & 2 x cover cap). 300 x floor approx. 100 x 60 cm. 1200 x shelf holders. 61 x diagonal 1176 mm ( for crossing ). 61 x turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 8000,00 € net plu ...

30,06 running meters shelf racks, 60cm deep , Workshop shelves , Storage racks , Hand storage , Plug-in racks , Small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 30,06 m Shelf offer 30,06 running meters consisting of: 31 x stand approx. 200 x 60 cm, disassembled (incl. 2 x stand & 2 x cover cap). 150 x floor approx. 100 x 60 cm. 600 x shelf holders. 31 x diagonal 1176 mm ( for crossing ). 31 x turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 4199,00 € net plus lega ...

5,06 m shelving racks, 60cm deep , Workshop shelves , Storage racks , Hand storage , Plug-in racks , Small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 5,06 m Shelf offer 5,06 running meters consisting of: 06 x Stand approx. 200 x 60 cm, disassembled (incl. 2 x stand & 2 x cover cap). 25 x floor approx. 100 x 60 cm. 100 x shelf holders. 06 x diagonal 1176 mm ( for crossing ). 06 x Turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 728,00 € net plus legally valid VAT  ...

Screw pump, EMTEC-A20R46-W110221, 100bar, 29L/min, Allweiler, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Screw pump, EMTEC-A20R46-W110221, Allweiler - pressure 100bar - 7,08 KW - 29,1 L/min - incl. coupling for motor shaft D38mm - original packing Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Frequency converter, 14F4C1G-M480, 7,5KW, KEB, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in its original packaging. Input: 50/60Hz 3 x 305-440V 18,1A 3 x 460-500V 15,4A Output: 0-1600Hz 3 x 0 - 440V 15,4A 3 x 0 - 480V 14,0A 11KVA, 7,5KW, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

2x Deutz MWM gas generator set 150 kVA --> 2 identical devices available (price per piece) - - - - - Engine: - Deutz / MWM (Germany) - Model: G234 V12 - 12 cylinders - Gas (natural gas) -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: AvK (A.van Kaick, Germany) - 150 kVA - 230 / 400 volts - 50 Hertz - - - - - Condition: -Used - The devices come from a waterworks and were installed there for emergency power protection / for occasional use - The motors were cooled by an external cooling circuit - - - - - Transport: - A Germany-wide transport is possible for an extra charge - In order to be able to quote an exact freight price, please send us an inquiry with your postal code - - - - - Price and payment: - Price: 6500,- € + 19 % VAT = 7735,- € (per piece) - Payment: Prepayment - An invoice with VAT is issued - - - - - Ot ...

Asynchronous motor, main spindle drive, 2AD100C-B05OB1-AS03-C2N1, R911246799, Rexroth, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging. - Asynchronous motor, main spindle drive - Power: 12.6 - 18.9 KW - 380V / 3 pol. - 3000 - 9000 rpm - 40 Nm - 32 A - 58 kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we will refund the purchase price.

+ + + Availability / Delivery time / Pre-order + + + --> Planned completion date for the first 4 devices is March 2023 (Provided that there are no unforeseeable delays or supply bottlenecks in between) --> A pre-order can already be placed - - - - - price outside EU: 16.200,- € gross price: €19,278 - - - - - Deutz emergency generator set 80 kVA + + NEW - Year of construction 2023 + + - - - - - Engine: - Deutz (Germany) - Model: BF4M2012C - 4 cylinders -Diesel - 1500 rpm - Displacement: 4038 cc - - - - - Generator: - Manufacturer: MeccAlte (Italy) - 75 / 81 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital ComAp starter unit - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Motor monitoring - Operating hours counter - Maintenance tim ...

Asynchronous motor, main spindle drive, 2AD100C-B35OA1-AS03-A2N1, R911264223, Rexroth, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. - Asynchronous motor, main spindle drive - Power: 12,6 - 18,9 KW - 380V / 3 pol. - 3000 - 9000 rpm - 40 Nm - 32 A - 58 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Servo motor with pinion, 3HAC029031 004, ABB, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation, is in a completely mint condition and in its original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Incremental length measuring device + certificate, LC183, ML740mm, Heidenhain, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Absolut, incremental, encapsulated length measuring device with large-profile scale housing, LC183, measuring length 740mm, Incl. quality test certificate Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can ...

Incremental length measuring device + certificate, LS106, ML740mm, Heidenhain, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Incremental encapsulated length measuring device with large-profile scale housing, LS106, measuring length 740mm, Incl. quality test certificate Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return th ...

Incremental length measuring device + certificate, LS403, ML 220mm, Heidenhain, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Incremental encapsulated linear encoder with small scale housing, LS403, measuring length 220mm, Incl. quality test certificate Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we w ...

+ + + Availability / Delivery time / Pre-order + + + --> Planned completion date for the first 7 devices is March 2023 (Provided that there are no unforeseeable delays or supply bottlenecks in between) --> A pre-order can already be placed - - - - - price outside EU: €17.500 gross price: €20,825 - - - - - Deutz emergency generator 100 kVA + + NEW - Year of construction 2023 + + - - - - - Engine: - Deutz (Germany) - Model: BF4M1013EC - 4 cylinders -Diesel - 1500 rpm - Displacement: 4764 cc - - - - - Generator: - Manufacturer: Stamford (England) - 100 / 110 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital ComAp starter unit - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Motor monitoring - Operating hours counter - Maintenance time ...

+ + + Availability / Delivery time / Pre-order + + + --> Planned completion date for the first 10 devices is March 2023 (Provided that there are no unforeseeable delays or supply bottlenecks in between) --> A pre-order can already be placed - - - - - Net price: 14.000,- € gross price: €16,660 - - - - - Deutz emergency generator set 60 kVA + + NEW - Year of construction 2023 + + - - - - - Engine: - Deutz (Germany) - Model: BF4M2011C - 4 cylinders -Diesel - 1500 rpm - Displacement: 3108 cc - - - - - Generator: - Manufacturer: Stamford (England) - 60 / 66 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital ComAp starter unit - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Motor monitoring - Operating hours counter - Maintenance timer  ...

+ + + Availability / Delivery time / Pre-order + + + --> Planned completion date for the first 5 devices is March 2023 (Provided that there are no unforeseeable delays or supply bottlenecks in between) --> A pre-order can already be placed - - - - - Net price: 11.500,- € gross price: €13,685 - - - - - Deutz emergency generator set 30 kVA + + NEW - Year of construction 2023 + + - - - - - Engine: - Deutz (Germany) - Model: F4M2011 - 4 cylinders -Diesel - 1500 rpm - Displacement: 3108 cc - - - - - Generator: - Manufacturer: Stamford (England) - 30 / 33 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital ComAp starter unit - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Motor monitoring - Operating hours counter - Maintenance timer - ...

BITO P25 TRABSES Data: H : approx. 8 cm D : approx. 5 cm L : approx. 220 cm Used goods from stock Trusses in blue Price per piece AVAILABLE MULTIPLE TIMES Price: 20,00 € net plus legally valid VAT You will receive an invoice with VAT.

+ + + Availability / Delivery time / Pre-order + + + --> Planned completion date for the first 8 devices is March 2023 (Provided that there are no unforeseeable delays or supply bottlenecks in between) --> A pre-order can already be placed - - - - - Net price: 12.500,- € gross price: €14,875 - - - - - Deutz emergency generator set 40 kVA + + NEW - Year of construction 2023 + + - - - - - Engine: - Deutz (Germany) - Model: BF4M2011 - 4 cylinders -Diesel - 1500 rpm - Displacement: 3108 cc - - - - - Generator: - Manufacturer: Stamford (England) - 40 / 44 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital ComAp starter unit - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Motor monitoring - Operating hours counter - Maintenance timer  ...

Pallet transfer station Railing lock Pallet lock for mezzanine Storage floor FROM STOCK Data: Width : approx. 170 cm Width incl. mounting : approx. 260 cm Depth : approx. 150 cm Height : approx. 220 cm Used goods from stock in blue Price per piece AVAILABLE MULTIPLE TIMES Price: 599,00 € net plus legally valid VAT You will receive an invoice with VAT.

DEXION P90 TRUSSES Data: H : approx. 10 cm D : approx. 5 cm L : approx. 210 cm Used goods from stock Traverses in galvanized Price per piece AVAILABLE MULTIPLE TIMES Price: 20,00 € net plus legally valid VAT You will receive an invoice with VAT.

3,85 LF WIDE SPAN RACKS 60CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 60 cm L : approx. 3,85 m Shelf offer consisting of: 03 x frame approx. 200 x 60 cm, disassembled. 16 x traverse approx. 185 cm. 08 x Contact back approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 425,00 € net plus legally valid VAT You will receive an invoice with VAT.

57 LF WIDE SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 57 running metres Shelf offer consisting of: 031 x frame approx. 200 x 80 cm , disassembled. 240 x traverse approx. 185 cm. 120 x support shelf approx. 184.5 x 79.5 cm. 240 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 7267,00 € net plus legally valid VAT You will receive an invoice  ...

13,35 LF WIDE SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 13,35 m Shelf offer consisting of: 08 x frame approx. 200 x 80 cm, disassembled. 56 x traverse approx. 185 cm. 28 x support shelf approx. 184.5 x 79.5 cm. 56 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1724,00 € net plus legally valid VAT You will receive an invoice with VAT.