vanderlande 600mm 750mm used for sale

Properties: Used telescopic belt conveyor Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged 4 pieces in stock Price per piece Technical data: Manufacturer: Hermann Schmidt Built: 1994 Total length (retracted): 6,100 mm Total length (extended): 11..600 mm Drive type: Hydraulics Total width incl. control cabinet: 1,400mm Total width: 950mm Head incl. frame: 1.660mm Colour: Red Belt type: Smooth Belt width: 2x 600mm 1x 590mm 1x 500mm telescopic belt conveyor The telescopic belt conveyor is ideally suited in the picking zone to interlock machines or workstations and to optimize the internal operation. During transport, the telescopic belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the delivery ...

Robland HX TZ Saw milling Engine: 2x 4 hp, 400V, 50hz Saw blade diameter 250mm Cutting height 85mm to 90° Cutting height 55mm to 45° Sliding table 1450 x 320mm Cutting length 1200mm Cutting width between Saw blade and parallel stop 600mm Miter attack with ezenter tensioner Weight 340kg

properties: Manufacturer: Budde Condition: fully functional, with traces of usage Fuesse: to be ordered separately Color: Blue Material: Steel Ideal for fast material handling Expertly disassembled and packaged Drive type: SEW motor Price per piece Stock 7 pieces Technical Data: Total length: 2.100mm Total length short side: 750mm Total width: 1020 mm Roll width/conveyor width: 990mm Axle distance: 60 mm Roll diameter approx.: 50 mm Side guide made of steel Height: 215mm Width: 25mm roller conveyor The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimizing the internal process. During transport, the roller conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connec ...

2 pieces curve belt conveyor 180 degrees, helix for climbing bands with SEW - used -: Price per piece from location: 2.995.-€ (net)! Manufacturer: Transnorm Type: 1600-105 Helix Built: 2011 Conveyor curve 180 degrees Nominal radius: 600mm Rated width: 700mm Condition: good Available: now Location: Bautzen warehouse

Properties: Used roller conveyor from the manufacturer Mannesmann / Dematic Condition: fully functional with traces of usage Ideal for fast material transport Specialist dismantled and packaged Drive: Round belt Incl. SEW motor 0.55 KW Stock 2 pieces Technical data: Dimensions of the roller conveyor Total length: 600mm Total width: 700mm Roll width: 610mm Roll diameter: 50mm Railway consists of 10 rollers Information on the framework Height: 165mm Width: 35mm Roller track The roller conveyor is ideal in the picking zone for interlocking machines or work places and to optimize the internal flow. During transport, the roller conveyor can feed sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connecting line in front of or between production and mach ...

Key data: 1600 Heidenhain, 1000 TNC 426, 1400

Table length: 1600 mm Table width: 1000 mm Longitudinal X: 1400 mm Cross Y: 1000 mm Vertical Z: 1000 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 426 Make: CME Type: FS-1 Control: HeidenHain TNC 426 YOP: 2002 X-Axis:         1.400mm Y-Axis:         1.000mm Z-Axis:         1.000mm Table Length:   1.600mm Table Width:    850mm Table load:     2.500Kg Power on spindle:22kW Spindle speeds: 4000Rpm Spindle Taper:  50ISO/Bt/Mk Feed rate X-Axis:20.000mm/min. Feed rate Y-Axis:20.000mm/min. Feed rate Z-Axis:20.000mm/min. Length:         4.260 mm  Width:          2.500 mm  Height:         2.600 mm  Weight:         9.900 kg  Swi ...

Weima WL 4 Hackers Weima Single-shaft Shredder NEW Funnel opening with logspacer 600x1050mm Funnel content 0.6m/3 Working width of the rotor 600mm Diameter of rotor 252mm Drive power 18.5 kW Rotor speed 80-120 rpm Knife number 28 pieces Type & size of knives concave / 40 x 40 mm Sieblochung 10 - 100 mm Painting WEIMA Standard RAL 2002 / 7016 Connection value 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg 2nd knife row

Key data: 1000 Siemens, 3936 840D Shopturn

Turning diameter: 1000 mm Turning length: 3936 mm Turret positions: 0 CNC Brand: Siemens CNC Model: 840D Shopturn Motorised Tailstock Siemens 840D shopturn Steady rest 4 chuck 1000 mm 3 chuck   630 mm Chip conveyor 4000 mm x 1100 Hohe Parat tool system with insert Max. turning Ø:1.000mm X-Axis:        750mm Z-Axis:        3.936mm Spindle bore:  160mm Speedrange:    660Rpm Spindle power: 39kW Chip conveyor: Yes  Pinole taper:  6Mk Stroke pinole: 300mm Quill Ø:       160mm Length:        10.000 mm  Width:         2.600 mm  Height:        2.600 mm  Weight:        14.000 kg 

properties Used belt conveyor Material: Aluminum / Steel Color: Blue,silver Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Incl. SEW Motor Incl. 6 feet, height adjustable 1 pcin in stock Technical data: Dimensions of the belt conveyor Total length: 10,000mm Total width incl. motor: 850mm Total width without motor: 700mm Belt width: 600mm Frame Height: 120mm Frame Width: 30 belt conveyor The belt is ideal in the picking zone for interlocking machines or workstations and to optimize the internal process. During transport, the belt conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connecting line in front of or between production and machining machines. It also enables efficient p ...

properties: Used telescopic belt conveyor Condition: fully functional with traces of usage Ideal for fast material transport Expertly dismantled and packaged Incl. feet Incl. control cabinet Colour: red 1 pcin in stock Technical Data: Manufacturer: FAM Conveyor systems Magdeburg Built in 1997 Total length retracted: 5,200mm Total length extended: 11.500mm Total width incl. control cabinet: 1,200mm Total width without control cabinet: 930mm Head incl. feet: 810mm Belt width: 600mm Belt type: Smooth telescopic belt conveyor The telescopic belt conveyor is ideal in the picking zone for interlocking machines or workstations and to optimize the internal flow. During transport, the telescopic belt conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed or drop-off point and also serves, for exam ...

Key data: 66 _Unknown / Other, 2080

Capacity: 66 t Folding length: 2080 mm CNC Brand: _Unknown / Other Max. bending length:        2.080mm Distance between column:    1.750mm Max. pressing force:        66T Dis. Beam – Table:          347mm Beam stroke:                200mm Table Width:                120mm Troth beam:                 400mm Approch speed:              200mm/min. Working speed:              10mm/min. Return speed:               130mm/min. Adjustment X-Axis back gauge:600mm Number of controlled axis:  5 Control:                    Del ...

Weipert start hole drilling machine Flexibility and economic Producing micro-bores TECHNICAL DATA: Electrodes: 0.50-3mm Travel X-axis: 250mm Travel Y-axis: 350mm Travel Z-axis (Z1& Z2) 600mm Travel W-axis 300mm Feed X,Y,Z-axis 200mm/min Spindle speed 20-120rpm Aspect ratio 300:1 Table dimensions 436x316mm max. working current 30 A Table electrode 360mm Dielectrium container 25L Power 3.5kW Weight 600 Kg

Spindle diameter: 50 mm Cross X: 1985 mm Vertical Y: 1620 mm Table length: 1600 mm Table width: 1400 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: Heidenhain CNC Model: TNC 155 UNION - BFT 110 / 7 Horizontal borer Ø 110 X 1985 Y 1620 Z 1960 W 710 mm MACH - ID 6417 Make: UNION Type: BFT 110 / 7 Control: Heidenhain TNC 155 YOP: 1987 X – Travel:              1.985mm Y – Travel:              1.620mm Z – Travel:              1.960mm W – Travel:              710mm Table Length:            1.600mm Table Width:             1.400mm Table load:              6.300kg Speeds / ranges:         1250Rpm P ...

Used Linear Oven Electric power supply Belt width: 600mm Manufacturer: Heat and Control Model: Height: 2300 mm Width: 1600 mm Length: 7500 mm Electric power supply: 400V 50Hz 3N

Little David case taper Model: LDU/2 Serial: 5015 Top case taper, bottom grip belts with side guides, max box 550mm W x 600mm H, mobile, 3Ph

Capacity: 100 t Folding length: 3100 mm CNC Brand: Amada CNC Model: Operateur Max. bending length:        3.100mm Distance between column:    2.700mm Max. pressing force:        100T Dis. Beam – Table:          450mm Beam stroke:                180mm Approch speed:              8mm Working speed:              100mm Return speed:               80mm Adjustment X-Axis back gauge:750mm Number of controlled axis:  4 Control:                    Opperateur  Length:                     3.700 mm  Width:            ...

Manufacturer: Soco System Model: T10 Year: 2006 Max box dimensions: height: 750mm wide:900mm LOWER GLUE HEAD IS MISSING !

properties Used belt conveyor from the manufacturer Blume Fördertechnik Colour: Blue Incl. drum motor Incl. feet Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional 4 pcs in stock Technical data: Total length: 4.055mm Total width incl. motor: 600mm Total width without motor: 460mm Belt width: 400mm Belt type: Smooth BDL drum motor Engine type: 11s KW0.3 m/s0.30 belt conveyor The belt is ideal in the picking zone for interlocking machines or workstations and to optimize the internal process. During transport, the belt conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connecting line in front of or between production and machining machines. It also enables efficient parts transport i ...

Center height: 650 mm Center distance: 6500 mm Spindle bore: 140 mm Swing over bed Ø:        1.300mm Swing over cross slide Ø:1.000mm Swing in the gap Ø:      1.600mm DBC Turning Length:      6.500mm Gap length:              400mm Spindle bore:            140mm Spindle power:           28.5kW Bed width:               650mm Tailstock spindle Ø:     120Ø Stroke pinole:           300mm Spindle taper:           6Mk Speeds / ranges:         800Rpm Length:                  8.360 mm  Width:                &n ...

Lid Maho DMC 80 U hi-dyn Workspace: X-axis: 800mm Y-axis: 700mm Z-axis: 600mm Workpiece weight: 800 kg Number of axes: 5

properties: Used telescopic belt conveyor Condition: fully functional with traces of usage Ideal for fast material transport Expertly dismantled and packaged Color: Red 6 pieces in stock Price per piece Technical Data: Manufacturer: Budde Built: 09/11 Model: TGF02 hydraulic height-adjustable Total length retracted: 5,000 mm Total length extended: 11,500 mm Total width incl. control cabinet approx.: 1.240mm Total width: 950mm Belt width: 600mm Condition: good (used) Belt type: Smooth 4 pieces: built in 2008 2 pieces: built 2009 telescopic belt conveyor The telescopic belt conveyor is ideal in the picking zone for interlocking machines or workstations and to optimize the internal flow. During transport, the telescopic belt conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed or ...

Infeed and Outfeed roller conveyor transport system for material lengths 2.5-14m Entrance dimensions- 2100 x 600mm The machine can process a plate of 2000mm wide and min. 5mm thickness Transport weight of max 1000 kgm Number of Turbines- 6 Turbines of C-380 11 kW Turbine Power Average speed at BSa 2 12- 1-1.5 mmin Abrasive hopper with screw conveyor 2.2 kW Abrasive used- Round low carbon sheet shot or cut wire Buck elevator with a 5.5 KW gear motor and a broken belt detection sensor Machine with Brush blow off plant Machine equipped with screw conveyor Automatic height adjustment for the brush Automatic adjustment for the 4 outer turbines

Description Universal CNC tooling machine from Kunzmann suitable for tooling, fixture construction, training as well as mold making Travel 650x500x450mm Speed: 12000 rpm Control Heidenhain 530 Technical data Year of construction / YOM 2006 Speeds / Spindle speeds 12000rpm Control Heidenhain 530 Feeds 2-25000mm/min Table / Table 1000 x 600mm Motor / Motor 10Kw Longitudinal / Travel (X,Y,Z) 650x500x450mm Weight /Weight ca 5500kg

Saacke Universal Tool Grinding Machine - with partial apperat - with cylindrical loop device - with collet chuck - with many grinding wheels Center height: 125mm, Center width: 600mm, Speed: 3300/ 5400/min, Grinding length: 500mm, Table dimensions: 835x145mm, Grinding wheel dimensions: 175x20mm - with coolant devices Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with f ...

Description Universal flat grinding machine of the elb brand suitable for tooling, fixture construction, training and mould making Travel: 750 x 320mm Table size: 600 x 300mm Technical data Grinding length 750mm Grinding width 320mm Workpiece height 500mm Table size 600 x 300mm Connection 50Hz 380V Engine 4.5KW Machine weight approx. 2650kg Dimensions 2000 x 1650 x 2110 mm

Center height: 500 mm Center distance: 1500 mm Spindle bore: 130 mm Overhauled gearbox in 2020 4 chuck Ø 1200 mm Build from <Meehanite> cast iron Hardened and ground guide ways Swing over bed Ø:        1.040mm Swing over cross slide Ø:710mm Swing in the gap Ø:      1.780mm DBC Turning Length:      1.500mm Gap length:              750mm Spindle bore:            130mm Spindle power:           24kW Bed width:               600mm Tailstock spindle Ø:     130Ø Stroke pinole:           300mm Spindle taper:           6Mk Speeds / ranges:         600Rpm Feed rate X-Axis:     ...

Dodmores Vibratory conveyor Serial: 30520 Stainless frame, 50Kg stainless hopper, overall length 2200mm, vibratory conveyor dimensions 2000mm x 600mm, mobile, 1Ph

Specs:: Manufacturers; Overbeck Type: PEA WN1263 Condition: Good ( Used) Total length: 3,000mm Total width incl. motor: 750mm Total width without motor: 510mm Conveyor width: 440mm Roller spacing: 100mm Roll diameter: 50mm Rolls made of steel Height: 140mm Total height incl. cladding: 380mm Colour: blue 2 pieces in stock Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We will be happy to prepare your individual offer or advise you on the conception or assembly questions. Just let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide .B: logistics, pharmaceutical industry, cra ...

Center height: 550 mm Center distance: 3000 mm Spindle bore: 128 mm Swing over bed Ø:        1.110mm Swing over cross slide Ø:775mm DBC Turning Length:      3.000mm Spindle bore:            128mm Spindle power:           30kW Bed width:               600mm Tailstock spindle Ø:     125Ø Spindle taper:           6Mk Speeds / ranges:         1120Rpm Length:                  4.500 mm  Width:                   2.000 mm  Height:                  2.000 mm  Weight:                  ...

Lapping Machine Microabrasive MA 600-3 GR - DPS - Height: 120cm - Depth: 150cm - Width: 130cm - 3 directions - Lapping disc diameter outside: 600mm - Lapping disc diameter inside: 115mm - Dressing ring diameter outside: 286mm - Dressing ring diameter inside: 248mm - Weight: 750kg - A lot of accessories are included with the machine, see pictures. The machine contains the electrical documentation and the user manual.

Turning diameter: 1420 mm Turning length: 3000 mm Turret positions: 8 CNC Brand: Siemens CNC Model: 840 D-SL Krewema - HDFM 55 x 3000 CNC Lathe Ø 1420 x 3000 mm C-Axis Live Tools = Mach4metal 6986 4 chuck 1600 mm 4 chuck 900 mm 3 chuck 630 mm ( bore 310) Sauter 8 position revolver Vdi 60 tool system Internal coolant tool holder Radial live tool holder Axial live tool holder Chip conveyor Internal coolant tool holder Swing over bed Ø: 1.420mm Swing over cross slide Ø:920mm Swing in the gap Ø: 2.050mm DBC Turning Length: 3000/4000 mm Gap length: 1.000mm Spindle bore: 155mm Spindle power: 51kW Bed width: 750mm Tailstock spindle Ø: 160Ø Stroke pinole: 300mm Spindle taper: MET 80 Mk Speeds / ranges: 1200Rpm Feed rate X-Axis: 8.000mm/min. Feed rate Z-Axis: 6.000mm/min. Length: 9.000 mm Width: 3.500 mm Height: 3.200 mm

GUANGZHOU PC2660S plastic mill was manufactured by Chinese granulator manufacturer Guangzhou 3E Machinery Co. in 2018. The structure of the cascade knife granulator is made of high quality steel, ensuring rigidity, high efficiency and long service life of the machine. The machine is equipped with a rotor (cutting knife arrangement) with a cascade layout, consisting of 3 rows of 6 knives each. The rotor is 600mm long, 600mm wide and has a diameter of 260mm. The moving knives operate at a speed of 607 rpm. The drive system has a massive drive wheel, and the drive is transmitted via V-belts to the rotor pulley. The total weight of the machine is 1060 kg. Technical parameters of granulator GUANGZHOU PC2660S - layout of cutting knives: cascade - number of rotor knives: 3 rows x 6 pcs. - number of stationary knives: 2 rows x 2 pcs. - rotor length: 600 mm - rotor width: 600 mm - rot ...

Convotherm Combi oven Model: OES 6.10 Stainless oven, digital control system, internal dimensions 600mm x 450mm x 500mm, 3Ph

Zeiss Model UMM850 Zeiss Model: UMM850 850mm X, 1200mm Y, 600mm Z, 7’ X 4’ X 12” table, Zeiss probe, 5 station probe changing station, joystick controls, Wilkerson compressed air dryer

Cazeneuve HB575 rebuilt lathe. Swing over bed: 575mm. Swing over carriage: 300mm. Distance between centers: 750mm. Motor power: 12,5cv. Spindle nose: 51mm. Equipped with universal chuck of 250mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Optional: DRO Fagor or Heidenhain. Optional: Steady rest. Optional: CE back guard

Turning diameter: 750 mm Turning length: 1605 mm Turret positions: 12 CNC Brand: Mazatrol CNC Model: Mazatrol Matrix Nexus SMW Steady rest 50 - 200 mm Large package jaws Kitagawa BB 212 315 3 chuck Max. turning Ø: 750mm X-Axis:         260mm Z-Axis:         1605mm Spindle bore:   102mm Speedrange:     3300Rpm Spindle power:  30kW ATC / revolver: 12 Speed live tools:3300Rpm Power live tools:8kW Chip conveyor:  Yes Tool eye:       Yes Pinole taper:   5Mk Stroke pinole:  200mm Length:         4500mm Width:          2000mm Height:         2100mm Weight:         7500kg

specifications: - Load capacity positioning base approx. 750 kg - Flatplate diameter 500 mm - max. workpiece diameter 1600 mm - Height turntable with horizontal position approx. 750mm - Turntable with right,- + left run - Axis of rotation turntable endless 360 ° - Rotation time per revolution 12.5 sec. - Pan left + right - Swivel axis rotation angle 180 ° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolt for clamping the workpiece in the middle of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder female thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space required approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - separa ...

2780 x 800 mm picking table packing table, new This is a packing table that is suitable for picking and packaging e.B parcels. However, this packing table is not recommended for welding or factory work. Dimensions workbench approx. 2,940 x 800 x 985 mm (W x D x H) Shelf dimensions approx. 1,730 x 320 x 985 mm (W x D x H) Included in delivery are: 03 x Shelf stand S-1, completely galvanized Total height 1,972 mm Depth up to height 985 mm: 800 mm Depth from height 985 mm: 320 mm 02x shelf stand S-1, completely galvanized Total height: 985 mm Depth: 800 mm 10 x Plastic cover caps 10 x Steel feet 33 x shelf trusses, S - 2, 1.650mm clear width 10 x shelf trusses, S - 1, 600mm clear width 28 x Shelves, H 25, 300 x 800 mm 04 x Shelves, H 25, 150 x 800 mm 06 x Shelves, H 12, 600 x 320 mm 03 x Shelves, H 12, 450 x 320 mm 14x visible storage boxes, new, ...

specifications: - Threaded drilling capacity approx. M 3 - M 12 - Unloading up to approx. 500mm - Stroke to approx. 600mm - Speeds approx. 80 - 1000 rpm - 2 St. spring pulls / balancers - Pneumatic connection 6 - 8 bar - mobile underframe - Space required approx. W 1000 x H 2000 x D 800 mm - Weight approx. 80 kg

properties: Used Schrenrollenbahn Condition: used Material: Steel (galvanized) Incl. SEW motors (9 drive units) Incl. 10 feet, height adjustable Speed adjustable Expertly dismantled and packaged specifications Scissor roller conveyor of the manufacturer Schmid Systemtechnik GmbH Year of construction: 2018 Conveying width: 600mm Material: Steel Total length extended: 9.000mm Total length retracted: 4.950mm Conveying width: 1.000mm Roll diameter: 50 mm Head: 820mm to 1040mm Number of rolls: 91 pieces Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt tracks, inclined conveyors or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage ...

Fully automatic optimization and sorting system for wood friezes, hard and softwood Plant is for sale due to cessation of operation. Plant was only in use for 1/2 year. Equipment of the plant: 2 pieces bunker/silo loading Collection Division into 2 parallel lines Sorting out waste Merge/isolate scanners Feeder WoodEye SortCut Scanner Scanner WoodEye SortCut Equipment: 4-sided profile measurement 4-sided fiber/texture analysis/angle measurement for hardwood and softwood Parallel division into 1.) to the optimization line or 2.) to the sorting line Equipment 1.) Optimization line: Equipment 2.) Sorting line: Fully automatic sorting of friezes in 2 sorting lines with a total of 6 sortings + 2 x waste and subdimensions Fully automatic feeding of the sorting stations Fully automatic exchange of sorting boxes full/empty Fully automatic output and coding of the full sortin ...

Fully automatic pallet winder incl. cover page dispenser specifications: PPower 16 kw 400V, 50Hz Compressed air 6 bar, consumption 150Nl/min Product dimensions: 1200x800nn - 1200x800mm Min. height: 750mm Height: 2000mm Delivery speed: 18 mt/min Year of construction 2004

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 700 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 5,48 x 2,0 m Foto von bereits gelieferten Maschine (600mm Spitzenweite) mit gegebenenfalls anderen Optionen. Geometrisch überholt und neu lackiert. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Dre ...

REF-2103 DOUBLE TWIST HARD CANDY WRAPPER CM•500 Double twist hard candy wrapper. Brand: S.A. Carle & Montanari. Model: CM-H500. Series number: 01/E. Machine number: 2001. Dimensions: 1.100mm width, 1.600mm length, 1.850mm height.

: . mm Working width: . mm Wheel width: . mm Roller conveyor length: 3000 mm Roller conveyor width: 600 mm : kg Length: 3000mm, width: 600mm, height approx. 750 mm, 3500x1200x8500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor length: 2200 mm Wheel width: 650 mm Roller conveyor width: 900 mm : 2000 kg Dimensions (LxWxH): 2,2x0,9x0,7 m Length: 3000mm, width: 600mm, height approx. 750 mm, 3500x1200x8500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor length: 2800 mm Wheel width: 720 mm Roller conveyor width: 1000 mm : 2000 kg height: 760 mm Dimensions (LxWxH): 2,8x1x0,8 m Length: 3000mm, width: 600mm, height approx. 750 mm, 3500x1200x8500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

-Manufacturer: Ulmia, circular saw type 1612 -Motor power: 2.2 kW -Speed: 2800 rpm -Saw blade: Ø 250 mm diameter up to 280 or slightly larger probably possible -cutting height 70 mm -Miter cut: up to 45° -Length stop: up to approx. 800 mm -Table dimensions in front of the saw blade without slide 300800mm; behind the saw blade 800800mm plus additional table self-made 500mm800mm (total 1300mm 800mm) -Sliding slide 750mm400mm -Space requirement 2.1m1.45m1.55m high -Transport dimensions 1.5m1.5m1.7m with pallet -Dimensions 1000/1340/H980 mm -Weight: 337 kg

New machine GSL 300/600 Rotor diameter 300mm Rotor width 600mm Drehzal 150 min. Drive 11 kW Rotor blade 48 pieces Strator knife 2 Screen perforation 6mm Weight approx. 950 KG The low-speed auxiliary mills of the GSL series operate at a low rotor speed and thus ensure low-noise operation. The high-quality regrind produced is largely free of dust content. The special rotor blades can be regrinded several times and no longer have to be adjusted in the auxiliary mill. The material to be shredded is fed via an inlet funnel manufactured in sandwich construction. An exchangeable sieve, which determines the final size of the ground material, closes the grinding chamber downwards. The material is discharged via a material collection container, which is manufactured in stainless steel as standard. In general, the material collection container is equipped with a connection for common v ...

grinding diameter: 915 mm grinding length: 3200 mm swing diameter: 915 mm grinding diameter - min.: 0 mm centre height: 450 mm centre distance: 3200 mm grinding wheel size: 750 x 305 x 80 mm max. workpiece weight between centres: 8000 kg grinding wheel turining speeds: 40 - 1500 U/min number of turns of spindle head: 6- 45 U/min grinding motor: ca. 30 kW electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 60 kW weight of the machine ca.: 40 t dimensions of the machine ca.: 12,0 x 5,0 x 2,5 m Machine reconditioned and modernised to Siemens Sinumerik S7 in 1998, including reconditioning of grinding wheel motor. Machine raised from 750mm dia. to 915mm dia in 2016. - Various Steadies - Coolant & Clarifier - Balancing Stand - Sony DRO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.