vanderlande 600mm 750mm used for sale

Table length: 850 mm Table width: 530 mm Longitudinal X: 600 mm Cross Y: 450 mm Vertical Z: 450 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Heidenhain 3-axis CNC machine (VMC)MICRON - VCP 600 MACH-ID 7587 Make: MICRON Type: VCP 600 Control: HeidenHain TNC 426 Year: 2000  X - Travel:     600mm Y - Travel:     450mm Z - Travel:     450mm Table Length:   850mm Table Width:    530mm Table load:     400 Feed rate X-Axis:15000mm/min. Feed rate Y-Axis:15000mm/min. Feed rate Z-Axis:15000mm/min. Spindle Taper:  40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:12000Rpm ATC / revolver: 30 Length:         3350mm Width:          2400mm Height:         2650mm Weight:         650 ...

Grinding disk diameter: 600mm, controls: Siemens S7, with documentation, was maintained regularly, an inspection is possible.

X-travel: 1300mm, y-travel: 550mm, z-travel: 560mm, table width: 600mm, max. load: 1t, table height: 950mm, controls: Siemens SINUMERIK, length: 4800mm, width: 1970mm, height: 2450mm, weight: 5.4t, with documentation.

Pallet length: 450 mm Pallet width: 450 mm Longitudinal X: 600 mm Cross Y: 600 mm Vertical Z: 600 mm Number of pallets: 0   Positions ATC: 60   CNC Brand: Fanuc CNC Model: FANUC 18i-MB X - Travel:               600mm Y - Travel:               600mm Z - Travel:               600mm B-Axis indexing:          360.000° Table Length:             450mm Table Width:              450mm Table load:               400 Number of pallets:        2 Feed rate X-Axis:         50000mm/min. Feed rate Y-Axis:         50000mm/min. Feed rate Z-Axis:         ...

2006 Hemingstone glue patch bag machine model hm 800 gpc bag size width 200-650mm length 200-750mm bottom gusseting 30-65 mm production speed cycles min 100-150 film width patch film 140mm

X-travel: 600mm, y-travel: 475mm, z-travel: 400mm, max. table load: 600kg, connected load: 14kW, controls: UNICON-F, length: 2750mm, width: 2710mm, height: 2720mm, weight: 3.3t, with documentation, machine bed made of micro-granite, drive of the y- and z-axis via ball screw and controllable AC motors.

Grinding length: 1000 mm Grinding width: 600 mm Grinding height: 600 mm Wheel diameter: 10 mm Spindle power: 10 kW X - Travel:              1000mm Y - Travel:              600mm Z - Travel:              600mm Table Length:            1360mm Table Width:             590mm Table load:              1050 Feed rate X-Axis:        26000mm/min. Feed rate Z-Axis:        26000mm/min. Grinding stone dimensions:400 x 100 x 127mm Power:                   10kW Speeds:                  3000Rpm Feed rate Y-Axis:        26000mm/min. Leng ...

Max. workpiece diameter: 10-350mm, max. grinding length: 600mm, clamping length: 1055mm, swivel angle: +/-60°, with oil mist filtration, an inspection is possible.

Max. table load: 8t, diameter table: 2000m, max. wheel diameter wheel: 720mm, pressure angle: 12.5-30°, max. bevel angle: 35°, diameter grinding wheel: 300mm/400m, peripheral speeds: 25 or 35m/s, grinding stroke: 750mm, number of teeth: 12-372, length: 6800mm, width: 5500mm, height: 3800mm, weight: 26t, was modernized in 2000 and equipped with CNC control, with documentation, on-site inspection is possible.

Grinding range X/Y/Z: 600mm/375mm/375mm, grinding wheel: 300mm/50mm/76.2mm, max. table load: 300kg, table clamping surface X/Y: 900mm/350mm, weight: 3300kg. Including hydraulic system, self-made extraction system. X/Y/Z axes limited in function. Documentation available. On-site inspection is possible.

Table length: 1000 mm Table width: 560 mm Longitudinal X: 800 mm Cross Y: 600 mm Vertical Z: 500 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Siemens CNC Model: SIEMENS 840D X - Travel:               800mm Y - Travel:               600mm Z - Travel:               500mm Table Length:             1000mm Table Width:              560mm Table load:               1500 Feed rate X-Axis:         30000mm/min. Feed rate Y-Axis:         30000mm/min. Feed rate Z-Axis:         30000mm/min. Spindle Taper:            Sk40ISO/Bt/Mk Power on spindle:&nbs ...

Wire diameter: 50 mm Speed: 50 rpm Number of rolls: 0   CNC Brand: _Unknown / Other ARD Facile A Controller EDM SINKER Seperate coolant tank IMEA ISTEMA head Collet device with collets X-Axis:     300mm Y-Axis:     250mm Z-Axis:     300mm Table Length:600mm Table Width:360mm Length:     2600mm Width:      2400mm Height:     2600mm Weight:     4500kg

Center height: 165mm, center width: 750mm, Morse taper: 4, grinding diameter small/large: 80mm/200mm, internal grinding small/large bore: 5mm/100mm, max. grinding depth: 250mm.

Cutting range round: 340mm, cutting range square: 340mm/380mm, feed length: 600mm, multiple feed: 1800mm, belt speed: 20 - 130m/min. Cutting speed infinitely variable. Material support height: 600mm (roller conveyor height). Documentation available. On-site inspection is possible.

Cutting capacity round: 360mm, cutting capacity square: 360mm/360mm, minimum remnant length: 80mm, saw blade dimensions: 5334mm/34mm/1.1mm, cutting speed: 20-130m/min, material feed: single stroke up to 600mm, work table height: 700mm. Dimensions X/Y/Z: 2600mm/2400mm/2000mm, weight: approx. 2500kg. Flywheel defective. Including chip conveyor Knoll 150 K-1. On-site inspection is possible.

Omga T 2020 NC Optimizer Maximum element thickness 120mm Maximum element width 320mm Minimum element length 600mm Maximum feed speed 180m/min Saw motor power 5.5kw Feed motor power 7.5kw Maximum acceleration 15m/s Saw cutting cycle time 0.2-1sec Average number of cuts 80-90/min

Capacity round maximum diameter: 830 mm Angle degrees maximum: 90 Capacity square: 9195 mm Workpiece height: 830 mm Workpiece width: 830 mm Capacity rectangle: 830 mm Cutting 90°:        730 Cutting flat 90°:   730 x 830mm Feed single stroke: 750mm Feed multiple stroke:9999mm Min. cutting length:8mm Cutting speed Vario:12 - 120 Circle blade size:  9195 x 67 x 1,6mm Power:              20kW Chip conveyor:      Yes Length:             2640mm Width:              5040mm Height:             2865mm Weight:             11500kg

The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation.

x-travel: 400 mm y-travel: 200 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m SK40, xyz 400mm/200mm/400mm, table size 750mm x 300mm spindle speed 40-1600rpm, infeed 8-320mm/min weight ca. 2000kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity round maximum diameter: 530 mm Angle degrees maximum: 90 Capacity square: 7675 mm Workpiece height: 530 mm Workpiece width: 530 mm Capacity rectangle: 530 mm Cutting 90°:        530 Cutting flat 90°:   530 x 630mm Feed single stroke: 600mm Feed multiple stroke:1500mm Min. cutting length:6mm Cutting speed Vario:12 - 120 Circle blade size:  7675 x 54 x 1,3mm Power:              9,5kW Chip conveyor:      Yes Length:             2225mm Width:              5215mm Height:             2680mm Weight:             5250kg

Nominal punching force: 60t, stroke speed: 60-200/min, tool installation height: 240mm, ram adjustment: 50mm, max. strip width: 250mm, max. strip thickness: 3.5mm, max. tool length: 600mm, with documentation, was maintained regularly, the machine has been idle for five years

Rated power: 50-125kVA, throat depth: 350-750mm, arm distance: 240-500mm.

Grinding length: 600 mm Grinding width: 600 mm Grinding height: 220 mm Wheel diameter: 800 mm Spindle power: 28 kW Surface grinderELB - DG-L SWR 60 MACH-ID 7585 Make: ELB Type: DG-L SWR 60 Year: 1988  Max. grinding 800 mm Dressing device Infinitely vario grinding speeds with dro Infinitely vario table speeds Infinitely stroke speed ghrinding slide Infinitely vertical in feed wheel Package with fanches and stones X - Travel:              320mm Y - Travel:              220mm Z - Travel:              320mm Table Length:            600mm Table Width:             600mm Table load:              400 Feed rate X-Axis:        0,01 to 0,2 mm in fee ...

Table length: 300 mm Table width: 300 mm Longitudinal X: 300 mm Cross Y: 300 mm Vertical Z: 300 mm CNC Brand: _Unknown / Other Seperate coolant and frequency converter Last service & Test Log in 2018 Run out in 1 uM Spindle speeds:50000Rpm Spindle Taper:50ISO/Bt/Mk Length:       1200mm Width:        800mm Height:       600mm Weight:       200kg

X-travel: 800mm, y-travel: 600mm, z-travel: 400mm, U-travel: 60mm, V-travel: 60mm, workpiece dimensions: 1300x910x400mm, max. workpiece weight: 2.3t, dielectric capacity: 210l, connected load: 10kVA, length: 2550mm, width: 2350mm, height: 2200mm, weight: 4.84t, with generator, wire guide, protective cabin, documentation and other accessories, on-site inspection is possible.

Clamping surface: 1700x950mm, table dimensions: 600x200mm, feed: 600mm, length: 3500mm, width: 2200mm, height: 1150mm, shafts front side: 5 each top/bottom, including 7x slides, 2x welding control DTW 1Z1P, 2x resistance welding unit ET 15.1/15kVA power, without documentation, an on-site inspection is possible.

Capacity: 15 - 70 kg/h; Briquette diameter: 60 mm; Automatic start-up: Yes; Oil preheating system: Yes; Material moisture: max 15%; Container size: octagonal, diameter 750mm; Hopper height: Dimension: 1500mm x 900mm x 1065mm (L x W x H); Motor power: 5.5 kW; Control cabinet: electronically controlled via PLC; Weight: 450 kg;

Load capacity: 100kg, weight 1760kg, layer use: 1-layer. EURO standard baskets can be used: Length/width/height: 600mm/400mm/288mm. Spray cleaning and flood cleaning possible.

Travel X/Y/Z: 500mm/400mm/350mm, distance table-pin nose: min. 250mm/max. 600mm. Work table clamping surface X/Y: 650mm/450mm, max. table load: 500kg, erosion limit load: approx. 300N. Internal dimensions of work bowl X/Y/Z: 845mm/635mm/340mm, max. filling height:: 300mm, max. workpiece height: 260mm. Documentation available. On-site inspection is possible.

Rotor weight: max. 50kg, rotor diameter: max. 720mm, rotor length: max. 600mm, spindle: S100, motor speed: 2500 rpm. Weight: 850kg.

Connected load: 18kW, length: 1500mm, width: 600mm, height: 1700mm, weight: 650kg.

Capacity: 15 - 55 kg/h; Briquette diameter: 55 mm; Container size: octagonal, diameter 750mm; Hopper height: Dimension: 1500mm x 900mm x 1065mm (L x W x H); Motor power: 4 kW; Control cabinet: electronically controlled via PLC; Weight: 450 kg; The Nano briquette press is ideal for companies with small production. Due to the compact design, it is also possible to install the press under an existing extraction system without great effort.

A circular beam saw with approx. 3m roller conveyor to the left and right of the machine. Max. Cutting width: 840mm, max. cutting height: 280mm, speed: 1500rpm, saw diameter: 750mm, table dimensions: 1560mm/1560mm/940mm. Saw blade swivel 90° - 30°, extraction nozzle under/above the table: 160mm/100mm. Documentation available.

Closing force: 1500kN, screw diameter: 60mm, stroke volume: 622cm³, opening stroke: 900mm, installation height: 300/600mm, weight: 7.6t, an inspection is possible.

Clamping force: 3500kN, injection unit: 1700, drive power: 75kW, control system: Graphtrack/DSP with trackball, plasticizing unit: HiMelt screw 70-220(1801bar,954cm³), mould height: 600mm-950mm. Operating hours: 83111 (as of: 14.04.2021). Buyer must provide oil filling after purchase. Material conveyor not included. Available from 30.07.2024. Documentation available. On-site inspection is possible.

MCM Clock 600 MP14 FMS consisting of 2 machines CNC FANUC 16i-M, 14 pallets 500mm x 500mm Spindle 15000RPM full 4th axis (360.000 pos) Tool Changer: 200 pos. X=600mm, Y=600mm, Z=700mm JFMX supervisor 2001 Under power in our warehouse in Gussago Mimu Machine Tools (Italy), X: 600, Pallets: 14, Pallet size: 500x500, Spindle: 15000 rpm

3 MONTHS WARRANTY Offer consisting of: Laminating machine Foliant Gemini C 400 A Feed: automatic via flat stack feeder Sheet separation: automatically after lamination -Format: max. 380 x 580mm; min. 300 x 250mm - Paper weight: 115-350g/sqm - Output: 15m/min. / max. 1,800 B3/hour - Stack height: 250mm - Lamination accuracy: +/- 2mm - Temperature regulation: 80-140°C - Warm-up time: 5 minutes - Dimensions: 2,800 x 800 x 1,600mm - Power: 230V/ 50Hz - 3,15kW - Weight: 305kg If you wish, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing offer

Multi-blade saw Cosmec SM 100 Machine No. 2632 Year: 1994 Production COSMEC Italy 22kW (30HP) 380V, 40 Hz Variable speed 5/30 m/min Saw blade min/max 250/300mm Max. cutting depth 100mm Width feed belt/transport chain 250mm Max. distance between 2 saw blades 230mm Minimum workpiece length 600mm Dimensions: 1650x1400x1300 Weight 1300kg

Rounds: 3 mm Squares: 120 mm Flats: 120 mm Flats on edge: 120 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   Profile bending machineSAF Tauring - DS 120 MACH-ID 7641 Make: SAF Tauring Type: DS 120 Year: 1986 Horizontal and vertical:H + V Shaft Ø:               120mm Number of rolls:       3 x 315 Capacity flat:         120 x 45 x 750mm Capacity Tube:         180 x 3 x 2500Ø x mm Capacity bar:          80 x 80 x 300mm Capacity T-Profile:    120 x 120 x 13 x 2500mm Working speed:         0 - 5mm/min. Length:                1600mm Width:                 1800mm Height:               ...

Hydraulic press brake LVD PPEB TURBO working power 2200 Kn working lenght 4270mm distance between column 3820mm travel 450mm max distance between bench and the ram 685mm gap 400mm approach speed 120mm/s working speed 21 mm/s return speed 200mm/s motor 37 Kw oil tank 350 lt machine weight 19400kg automatic crowning table 5 axes backgauge (X, R, Z1, Z2, X') control unit CADMAN CNC table width 120mm ram travel X 600mm Perfect working machine, possible testing on our warehouse in di Oderzo (TV), Italy.

Cooling capacity: 14.4kW, permissible min./max. temperature TS: +6°C - +20°C, refrigerant: R410A. Chilled water temperature at inlet/outlet: 15°C/10°C, ambient temperature/air inlet: 35°C. Length: 1100mm, width: 750mm, height: 1100, empty weight: approx. 220kg.

IWM SAN100 SP Sanitiser tunnel 2010, stainless, aperture 600mm x 600mm, belt dimensions 1800mm x 600mm, with recirculation tank, filter, level sensor, 3Ph

Amperage range maximum: 300 A Amperage range minimum: 240 A Welding machineESS - SynMag 4000 MACH-ID 7643 Make: ESS Type: SynMag 4000 Year: 2008  Rated power 60 %:300 Rater power 100 %:240 Imput:           400A Length:          900mm Width:           600mm Height:          900mm Weight:          180kg

Complete system with all the accessories necessary for installation and operation, see below! x = 7000 y = 1600 z = 800 / transverse stroke w = 600mm General overhaul 2007, year of production 1991 New Siemens Sinumerik 840D control system, new drive motors, guide guides refurbished, new control cabinets. Travel speed 12000 mm / min / w axis 6000 mm Rotary table TDV 2 max. workpiece weight 6t / clamping surface 1000x1000 Rotary table TDV 3 max. workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 such as new angle crank / chain tool change system / plate field / complete housing / Knoll hopper feed / suction / coolant system with belt filter incl. all BWF fixators for the installation of machine bed and plate

Working width: 4500 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5600x1350x3550 mm Weight: 3000 kg S&S frame press Bavaria 2000 L --------------------------------- With automatic pressing cycle + manual control for corner connections tenon + slots and dowel connection / mortised tenon, can be changed using a selector switch on the control cabinet. With basic equipment for the optional use of counter profiles if the sash is on loose part to be folded over. CE version Basic machine in the strongest welded frame, with thick-walled special hollow profiles. Guideways of the pressure bars for the press corners in a low-abrasion finish. Fast, smooth, manual width adjustment by ball-bearing carriage, fixation in 50 mm Hole grid, optional motorized width adjustment with with hydraulic clamping (surcharge). Height adjustment and pressing by long-stroke cylinder in one  ...

Shelf system 2-storey Manufacturer: SSI Schaefer R7000 total height: approx. 5.700mm Depth: approx. 600mm Width: approx. 800mm per field Total area approx. 31.8 x 15.5m 358/340 fields on two levels The entire system is equipped with 5-7 shelves per field Load capacity approx. 250 Compartment dividers available on request Two stairwells with stair width approx. 1m Clothes rails can be offered as an option. Plant is in very good condition.

Sealing length: 600mm, speed: 1-4/min, max. connected load: 4kW.

Max. welding width: 600mm, opening height: 280mm, packing length/ height: 450/ 170mm, output: 20 packages/min, max. film roll diameter: 250mm, compressed air supply: 6bar, length: 2830mm, width: 1344mm, height: 2014mm, with documentation.

Welding frame dimensions: 560x430mm, max. product dimensions: 520x390x260mm, max. film width: 600mm, max. film roll diameter: 250mm, connected load: 3.7kW, an inspection is possible.

There are 4 identical UNOX ovens available. Max. Temperature: 260°C, capacity: 6 trays, tray dimensions X/Y: 600mm/400mm, distance between trays: 80mm. Dimensions X/Y/Z: approx. 860mm/900mm/900mm, weight: approx. 90kg. Defects: The front glass of one oven is broken, but it works perfectly.