van de graaf used for sale

54 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 39.9 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40113-152

A plotter from the HP brand is offered; Model: HP DesignJet T830; Device was in use until the end Estimated value of goods: 1500€ Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. Auction-ID: A7-46944-249

Equipped with: lighting, rear-view mirror, PTO, no license plate, three-point linkage, front and rear pull frame, tow bar with ball, without license plate Auction-ID: A1-40139-189

Theft protection is offered as well as various other items from the retail trade , shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. Euro pallet is not part of the auction. Auction-ID: A7-46944-213

Equipped with: air conditioning, GPS, section closure, 4450 litres, 400 litres clean water tank, Deutz 6 cylinder 250HP diesel engine, varioselect cap holders with air-changeable cap holders from the cabin, induction loop, track width hydraulically adjustable from 210cm to 270cm Auction-ID: A1-40139-38

102 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 75.5 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40113-155

Includes 4x Lensvelt office chair, 3x mobile drawer unit, monitors and accessories not included. Auction-ID: A1-46651-1057

Equipped with Autopower 45km/h; PTO: 540/540E/1000 rpm; 2 double-acting hydraulic valves; fender control; Front linkage with PTO; front axle suspension; \"Mailleux\" Front Loader; tipper knob; hydraulic brake valve; top link; Auction-ID: A1-40139-50

Various items from the mass goods trade are offered. estimated value of goods 1000 € Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. The Euro pallet is not part of the auction. Auction-ID: A7-46944-103

bicycle saddle with damage; bicycle lock locked; including galvanized steel bike rack for 6 bikes; Auction-ID: A1-46651-507

24 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 17.7 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40113-150

Featured; keys for door and battery; range 50km; 110Nm of torque; Gears 8-speed Shimano Altus; Automatic lighting Turns on at dusk; 19.6 Ah battery capacity; TÜV-tested Quality tested in Germany; Color Powder coated, Black; Electric motor 250 Watt, Ananda mid-motor 110 Nm; Battery 19.6 Ah, 36 Volt, Samsung/LG; Tire 24\" x 2.15 front tire, 26\" x 2.15 rear tire, puncture resistant, reflective strip along the side; Saddle-soft universal, quick release for seat height adjustment; Handlebar adjustable 115-130 cm, padded handlebar; unused in plastic Auction-ID: A1-42018-262

Includes 3x Lensvelt office chair, 2x mobile drawer unit, monitors and accessories not included. Auction-ID: A1-46651-1110

Includes 2x Lensvelt office chair, 3x mobile drawer unit, monitors and accessories not included. Auction-ID: A1-46651-1059

42 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 31 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40113-151

A large format laminator is offered, easily possible up to A1. Estimated value of goods: 2500€ Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. Auction-ID: A7-46944-244

84 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 62.1 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40113-154

Includes 2x Lensvelt office chair, 1x mobile drawer unit, 1x whiteboard, monitors and accessories not included. Auction-ID: A1-46651-1117

Includes 2x Lensvelt office chair, 3x mobile drawer unit, monitors and accessories not included. Auction-ID: A1-46651-1043

Includes 3x Lensvelt office chair, 2x mobile drawer unit, 1x whiteboard, monitors and accessories not included. Auction-ID: A1-46651-1113

3 pieces of toner are offered in the colors yellow, cyan, manganta. Estimated value of goods: 600€ Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. Auction-ID: A7-46944-255

Year of construction 2021 DC output 250–1000 VDC Max. current 120A AC input 360–440 VAC Frequency 45–65 Hz Mains current 63A Protection class IP54 Weight 56 kg Connection Industrial power current Application Due to the wide voltage range up to 1000V suitable for modern EV platforms. CCS loading gun available Auction-ID: A1-42018-188

Chassis number not readable, PTO speed 540/1000 Auction-ID: A1-40139-45

72 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 53.2 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40113-153

Deutz-Fahr 6.175 C-Shift Tractor Year of construction 2017 Operating hours according to the display: 2,251 h Powerful 6-cylinder tractor with C-Shift transmission Engine power approx. 129 kW / 175 hp Topcon steering system installed Front linkage available Front PTO available 4 double-acting rear electrical control units Hydraulic top link at the rear K80 Ball Head Coupling Cab with automatic climate control Air-suspended driver's seat Front tyres: 540/65 R30 Trelleborg approx. 70 % Rear tyres: 650/65 R42 Trelleborg approx. 80 % Operating armrest with multifunction control Hydraulic connections front and rear Air brake system available Front and rear work lights Auction-ID: A7-46606-10131

Included: 1 x Nordson EFD Performus III dosing device, 1 x crosshair generator from Völker Video- und Datentechnik, model FKG-4 and accessories, including trolley Auction-ID: A1-46981-87

2x height-adjustable desk,1x Lensvelt office chair,1x mobile drawer unit(58x42cm),4x chair with wooden backrest Auction-ID: A1-46651-1105

max. wheel diameter:50 mm gear width:20 mm max. module:4 mm min. module:0,1 mm total power requirement:12,5 kW weight of the machine ca.:4000 kg dimensions of the machine ca.:2,2 x 2,5 x 2,3 m workpiece length - max.:300 mm

max. wheel diameter:300 mm gear width:100 mm max. module:5 workpiece turning speeds:0 - 1000 1/min work piece - max.:1100 mm workpiece clamping:auto. tension device number of spindle speeds:1000 1/min. spindle bearing diameter:100 mm diameter of spindle flange:120 mm tailstock travel:80 mm weight of the machine ca.:3500 KG dimensions:1200 x 1450 x 2250 mm total power requirement:10 kVA The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.

max. wheel diameter:300 mm max. number of teeth:999 max. module:5 total power requirement:10 kW weight of the machine ca.:1.800 Kos. dimensions of the machine ca.:1300 x 1450 x 2250 mm The Gear Tooth Deburring machine ? ZEM 300 for deburring of splines gear wheels and shafts The advantages at a glance - Vertical workpiece spindle - Chamferring, debburing and smoothing - Simultaneous Processing of 2 Gears - Dry Processing - Repeat accuracy when adjusting the tools - Simple integrated Pick up swing arm or linear loader - Crane hook machine Workspace Swing Diameter: 300 mm Process Diameter: 300 mm Workpiece Length: 450 mm Main Spindle Spindle Flange: Zylindrisch D=120 mm Front bearing spindle: 100 mm RPM max: 1500 U/min AC-Synchronmotor: 50 Nm Clamping cylinder : pneumatic Clamping force (5 bar): 10 kN Working axis swing arm for chamferring tool Feed force: 3 kN Ball screw drive: 25x5 P ...

max. wheel diameter:300 mm gear width:100 mm max. module:5 workpiece turning speeds:0 - 1000 1/min work piece - max.:1100 mm workpiece clamping:auto. tension device number of spindle speeds:1000 1/min. spindle bearing diameter:100 mm diameter of spindle flange:120 mm tailstock travel:80 mm weight of the machine ca.:3500 KG dimensions:1200 x 1450 x 2250 mm total power requirement:10 kVA The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.

max. wheel diameter:300 mm gear width:100 mm max. module:5 workpiece turning speeds:0 - 1000 1/min work piece - max.:1100 mm workpiece clamping:auto. tension device number of spindle speeds:1000 1/min. spindle bearing diameter:100 mm diameter of spindle flange:120 mm tailstock travel:80 mm weight of the machine ca.:3500 KG dimensions:1200 x 1450 x 2250 mm total power requirement:10 kVA The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.

working width:1400 mm Workpiece thickness max.: 80 mm work height max.:1000 mm Feed speed:4m/min I Stufe, 8 II Stuf m/min. Required air-pressure:max. 5 bar voltage:50 Hz, 380 V workpiece length:320 mm workpiece thickness min.:1 mm weight of the machine ca.:3500 kg Documents:vorhanden

working width:880 mm workpiece height:1- 70 mm work height max.:1000 mm Feed speed:4- 8 m/min. voltage:50 Hz, 400 V weight of the machine ca.:2.800 kg dimensions of the machine ca.:2500 x 1715 x1675 mm width:min. 350 mm Sanding cylinder diameter:420 mm electr. connected load:20 KW Required air-pressure:1 x R3/ 8 " pressure:5 bar tank:des Bandfilter ca.200 l automatic magnetic filter unit:vorhanden grinding tools:1540 x 900 mm accessories::9 Bänder Documents:vorhanden

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Working height: variable from 0,5mm ? 150mm adjustable Working width: 1150 mm Maximum part weight: 300 kg Wide belts with abrasive belt unwinding: 2200 mm As standard with vacuum hold system, optional with magnetic hold system Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and a ...

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining unit ...

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Machine is suitable for heavy-duty use. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide belts with abrasive belt unwinding: 3250 mm As standard with vacuum hold system, optional with magnetic hold system By using 3250 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can acc ...

Finishing machine single-sided machining or double-sided machining, second-hand 3 FLAKKO units with 4 disc tools each: Drive power 7.5kW Spindle speed 300 - 2500 rpm Feed speed 2-20 m/min Wet machining Tool diameter 230mm Working width 400mm for single-sided machining Working width 200mm for double-sided machining with turning device Special magnetic inserts designed for hot machining IPC control with PLC Connected load 3x 400V 50Hz Connected load approx. 52 kW Overhaul of all units with conversion to new 4-point bearing between 2021 and 2023. Special-price 25.000 EURO, net -free loaded truck- Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

material width:500 mm coil weight:2 x 2,0 t material thickness:1,0 - 6,0 mm coil internal diameter:350 - 420 mm coil external diameter:1600 mm no. of straightening rolls:9 straightening roll diameter:50 mm number of draw-in rolls:2 speed:0 - 40 m/min material thickness at 500 mm material width:3,5 mm power requirement:17,5 kW Dimensions (WxDxH):2,3 x 4,2 x 2,4 m straightening machine:RM 5050.4/9 double decoiler:AH 2000/2/M snubber roll:pneumatic interchangeable jaws:130 mm expansion of the inner diameter

material width:800 mm coil weight:12,0 t coil internal diameter:470 - 520 mm coil external diameter:1500 mm material thickness:0,4 - 2,5 mm no. of straightening rolls:8 straightening roll diameter:53 mm number of draw-in rolls:2 inlet roll diameter:160 mm speed:35 m/min material thickness at 150 mm material width:2,5 mm material thickness at 650 mm material width:1,5 mm material thickness at 800 mm material width:1,0 mm straightening machine:RM 8-53/160-800 decoiler:HE 200-1000

material width:250 mm coil weight:2,5 t coil internal diameter:430 - 520 mm coil external diameter:1650 mm material thickness:0,5-6 mm no. of straightening rolls:7 straightening roll diameter:60 mm number of draw-in rolls:2 weight straightener:1,2 t weight decoiler:1,4 t dimensions straightener (WxDxH):1,2 x 1,2 x 2,0 m dimensions decoiler (WxDxH):1,8 x 1,8 x 2,3 m expansion:hydraulic

material width:450 mm material thickness:1,0 - 14,0 mm coil weight:10,0 t coil internal diameter:470 - 520 mm coil external diameter:1100 - 2000 mm no. of straightening rolls:12 straightening roll diameter:2x70 / 2x96 / 8x127 mm number of draw-in rolls:2 inlet roll diameter:160 mm min. material width:100 mm speed:15 m/min power requirement:75,0 kW weight of decoiler:6,4 t weight of straightening machine:12,8 t dimensions decoiler (WxDxH):3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH):2,5 x 3,4 x 2,7 mm straightening machine:RMS-Vario-12-70/96/127-0450 infinitely variable drive:insert drive upper straightening part:hydraulic liftable loop bridge:hydraulic driven threading wedge:hydraulic decoiler:HES 12-650 infinitely variable drive:insert drive lag brake:pneumatic snubber roll:hydraulic; motoric driven expansion:hydraulic coil lifting device:hydraulic cropping shears:HS-150-0450

material width coil line:600 mm coil weight in kg:2 x 3000 kg coil internal diameter:460 - 630 mm coil external diameter:1500 mm material thickness coil line:0,5 - 3,0 mm Number of Straightening rolls:9 roll diameter:30 mm material cross-cut:1200 mm² weight:9,5 t Dimensions (WxDxH):4,3 x 2,6 x 2,6 m straightening machine:30.600/9 double decoiler:Kohler, 3000.2 ausiliary drive:hydraulic lag brake:pneumatic expansion:hydraulic snubber roll:hydraulic; motoric driven

Roughness Gauge / Surface Gauge Manufacturer: Hommelwerke (Hommel-Etamic / Jenoptik) Type / Model: T 2000 Machine Type: Roughness Gauge / Surface Gauge Condition: used, decommissioned, unchecked / defective Year of manufacture: not known Serial number: 506680 Country of manufacture: Germany Equipment / scope of delivery • Roughness gauge Hommelwerke T 2000 • Measuring column LV-50 • Stylus TKL 300/17 • Stylus with magnetic adapter TKU • Control unit MSC-1 • Machine table with integrated granite measuring plate • PC unit with monitor • Connection cable and visible accessories Condition / Notes • The system has been shut down. • A functional test has not been carried out, the overall technical condition is unknown. • The evaluation unit has a display, but it remains black, there is no display. → It can therefore be assumed that the display unit is defective. •  ...

Serial number: 4432 Operating voltage: 380 V Frequency: 50 Hz Rated current: 13 A Speed: from 40 to 2000 rpm Tool holder: SK 40 Feed range infinitely adjustable: 5 - 500 mm/min Creep traverse: 4 mm/min Rapid traverse: 1200 mm/min Table Longitudinal movement: 300 mm Spindle block Transverse movement by hand: 160 mm Support Vertical movement motorized: 280 mm by hand: 290 mm without protective bar: 330/340 mm Vertical milling head on spindle block can be moved by hand: 100 mm Table dimensions: 600 x 210 mm with 4 grooves and an attached vice, jaw width: 160 mm

Industrial Deburring Stations – Year 2019 SEW USOCOME actuator – Pneumatic control - General Description: We offer for sale these industrial deburring stations in good condition, year of construction 2019, designed for deburring operations in industrial environments. Robust, compact and safe stations, ideal for mechanical, machining, sheet metal or industrial subcontractors. - Technical characteristics Equipment Type: Deburring Station Year: 2019 Engine : SEW USOCOME Engine type: DRN80M2/BE05/FI B3 Maximum speed: 2860 rpm Order Type: MCLTPB0015-5A3-4-00 Structure: Column station with reinforced base - Integrated equipment Pneumatic up/down Foot pedal control Adjustable protective screen Built-in light stand Complete electrical box with dimmer and protections - Benefits Recent Material (2019) Rugged industrial manufacturing Engine recognized for its reliability Quick and easy inst ...

Lots of digital calipers / depth calipers – Mitutoyo, Holex, Garant, Helios-Preisser (7 pieces) Lots of a total of 7 measuring devices, some digital, some mechanical. Ideal for workshop, training, CNC environment or spare parts dispenser. Included: Mitutoyo CD-20D (500-312), 0-200 mm, digital Holex Digital caliper 150 mm, IP67, in case Garant IP65-C150, digital, 150 mm (housing damaged, functional) Helios-Preisser digital depth caliper (small, 0-150 mm) Mechanical 150-mm steel caliper in case Complete lot only – no individual sale.

Technical characteristics: Serial Number: 75787 Order: FANUC 0i-MD Washing pressure: 350 bar Flow rate: 29 L/min Water tank capacity: 1,500 L Feed speed / high speed: 48 m/min Spindles equipped with: 6 washing tools Axle travel: X: 650 mm   |   Y: 500 mm   |   Z: 500 mm Included: Large batch of spare parts (see PDF for details).

Features • Self-aligning for multiple diameters • Infinitely adjustable speed of the drive unit • Polyurethane coating of the rollers • Optimal load distribution (4 rollers/unit), particularly gentle for workpieces with low wall thickness and sensitive surfaces • High stability due to solid construction of the machine • CE certificate • Very good value for money • Remote control on the cable • Documentation in English Load capacity 5 t Workpiece diameter 300 - 2500 mm Drum diameter 250 x 100 mm Feed rate 100 - 1000 mm/min Total power requirement 0.75 kW Weight 0.6 t Dimensions L x W x H 1.5 x 1.0 x 0.6 m Condition: never used / new (5)