van de graaf used for sale

surface area: 420 800 mm no. of flutes: 9 groove width: 12 / Abstand 45 mm weight of the machine ca.: 110 kg dimensions of the machine ca.: 10,50,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm total power requirement: 3 kW weight of the machine ca.: 2,,2 t dimensions of the machine ca.: 2,522 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: - mm power requirement: 1 kW total power requirement: 1 kW weight of the machine ca.: 0,16 t dimensions of the machine ca.: 1,20,81,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Dialog 4 type of control: CNC Fräsen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 500 mm z-travel: 500 mm total power requirement: 7,5 kW weight of the machine ca.: 5,5 t Working range: Longitudinal stroke X axis 600 mm Vertical stroke Y axis 500 mm Cross stroke Z axis 500 mm Clamping size of angle table 530 x 900 mm Max. weight of workpiece on table 450 kg Distance from table to vertical spindle, min./max. 120 / 620 mm Distance from table to horizontal spindle, min./max. 156 / 656 mm Tool taper SK 40 Spindle speeds 0 - 6,300 rpm Feeds X, Y and Z Axes, max. 2 - 10,000 mm/min Quick feed X, Y and Z Axes 10,000 mm/min Spindle drive 8 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 5,500 kg Accessories / Special Features DIALOG 11 CNC Control in 4 axes with all the usual options, cycles, and subprograms. Graphic display and electronic hand wheel. Vertical milling head can be pushed up manually so that the  ...

x-travel: 5500 mm y-travel: 2750 mm z-travel: 1500 mm total power requirement: kW weight of the machine ca.: 20 t dimensions of the machine ca.: 8x4,5x4,2 m Measuring column, longitudinal movement, X Axis 5,500 mm Measuring slide, cross, as Y Axis (measuring head) 2,750 mm Measuring slide, vertical, as Z Axis (vertical) 1,000 mm Adjustment of measuring head, roll axis 360 ° Measuring table 5,000 x 2,500 x 350 mm Weight, approx. 20,000 kg Space required 8,000 x 4,500 x 4,200 mm Accessories / Special Features : o RENISHAW 3D probe head with rotating-tilting device, operating depending on orientation. o Universal 3D Measuring Software, CHOROS Version 5.2 with DEC Software, OPEN VMS Alpha ADL, Version 6.1 with various additional SEC Software, OVMS Base, NAS 150, Cluster, OPEN 3 D, Version 2.5, etc. for manual or automatic measuring of ruled geometry and freeform surfaces, ideally  ...

x-travel: 4070 mm y-travel: 1185 mm z-travel: 1985 mm total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: 6000 x 4500 x 4000 m Consisting of: Working Range: Measuring column, longitudinal movement, X Axis 4,070 mm Measuring slide, cross, as Y Axis (measuring head) 1,185 mm Measuring slide, vertical, as Z Axis (vertical) 1,985 mm Adjustment of measuring head, roll axis 360 ° pitch axis 220 ° Measuring table 5,000 x 2,000 mm Weight, approx. 15,000 kg Space required 6,000 x 4,500 x 4,000 mm Accessories / Special Features : o 3D tracer head, with turning/swivelling device. o Universal 3D Measuring Software, KOROS CAD 5.2.0 from November 2001 (with lots of enhancements), as well as HOLOS UX for manual or automatic measuring of all geometric elements and free-form surfaces, ideally on passenger car bodies, engineering parts and  ...

x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm weight of the machine ca.: 6,5 t CNC Steuerung Heidenhain TNC 426 Kühlmitteleinrichtung Spänewanne CNC control Heidenhain TNC 426 coolant device chip tank Technische Daten / technical details: X-Weg / X-travel 600 mm Y-Weg / Y-travel 525 mm Z-Weg / Z-travel 500 mm Spindeldrehzahlen / spindle speed 6300 UpM /rpm Werkzeugaufnahme / spindle taper SK40 Vorschubbereich X/Y/Z / feed range 10000 mm/min. Universaltisch / clamping area of universal table 750x530 mm Gewicht der Maschine ca. / weight 6500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2050 mm y-travel: 520 mm z-travel: 520 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Heidenhain TNC 430 2x 32-fold tool changer coolant device 2x chip conveyor measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. A dividing wall is also with the machine. Then the X-travel will be split. Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are  ...

x-travel: 800 mm y-travel: 700 mm z-travel: 600 mm turning speeds: 12000 1 U/min : control: Heidenhain total power requirement: 59 kW weight of the machine ca.: 10,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

waste oil collecting tank: . filling capacity: 1000 Liter : . with level indicator: . Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: DEMAG : . : 20 Euro . Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting capacity: 2,5 t weight of the machine ca.: 80 kg : : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 2.200 mm height of hook: 2.600 mm weight of the machine ca.: 1,8 t weight max. in kg: 1000 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Heidenhain TNC 355 x-travel: 1.000 mm y-travel: 400 mm z-travel: 450 mm surface area: 1.300 x 400 mm feed range: 1 - 6.000 mm/min number of spindle speeds: 60 - 3.600 U/min vertikal number of spindle speeds: 30 - 1.800 U/min horizonta spindle taper: SK50 vertical and horizontal milling possible: Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 10000 , 110

DEMAG SUMITOMO ERGOTECH 1000 T Injection Molding Machine - Year 2003 Type: 1000/1400 - 8000 NC4 Clamping Force: 1000 T Screw Diameter: 110 mm Theoretical Injection Volume: 4372 cm³ Injection weight. : 3930 gr Opening Stroke: 1250 mm Daylight : 2450 mm Distance Between Tie bar : 1400 x 1120 mm Platen Dimensions: 1950 x 1670 mm Mold tickness min/max : 500 /1200 mm Oil Capacity: 1300 L Dimensions: 11,90 x 3,20 x 2,90 m Weight: 63 tons

Vacuum well point dewatering filters, In 50mm and 60mm div length sizes., , = More information =, , Year of construction: 2022, , = More information =, , Year of manufacture: 2021, Colour: Yellow, Technical condition: very good, Visual appearance: very good, Damages: none, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to visit us? Yes, please!, , Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, yo ...

New Deutz BF4M1013EC. This engine has been converted into various machines if you are looking, we have it this Deutz BF4M1013EC. If this is not the type you are looking for, please do not hesitate to contact us. We have the possibility to supply various types of Deutz engines new, used or overhauled with appropriate software and in the configuration according to the engine number specified by you. Feel free to contact us to discuss things with each other., , = More information =, , Year of manufacture: 2024, Model year: 2022, Colour: Grijs, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, VAT/margin: VAT qualifying, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, dril ...

Pump is new and unused, assembled by manufacturer, , The SIP-series Screw Impeller Pumps are the do it all” pumps and have become very popular to use in all kinds of wet-construction works. It was just this set-up that has become the middle-man” between the very big market of hi-fuel consuming centrifugal dewatering pumps compared with the very specialized market of super-efficient low-fuel consuming piston pumps. Our 4-inch SIP 100-4 pump set was specially developed to be able to run successfully and efficiently on well-point dewatering without losing its flow while pumping a mixture of water and air. Designed and desired to excel in a wide range of works, our entire range of SIP-series centrifugal pumps handle today’s tough job site conditions. – Impressive solid handling capabilities make them ideal for wastewater, sewerage, mud, and so many more applications you can’t even ...

New Deutz BF4M1013EC. This engine has been converted into various machines if you are looking, we have it this Deutz BF4M1013EC. If this is not the type you are looking for, please do not hesitate to contact us. We have the possibility to supply various types of Deutz engines new, used or overhauled with appropriate software and in the configuration according to the engine number specified by you. Feel free to contact us to discuss things with each other., , = More information =, , Year of manufacture: 2025, Model year: 2022, Colour: Grijs, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, VAT/margin: VAT qualifying, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, dril ...

Good working Deutz F3L912 27 kW-1500 Rpm runs well, excellently suited as an exchange engine if an overhaul of your current one is no longer possible. Call or email for more information., , Weight: 350 kg, , = More information =, , Year of manufacture: 2009, Colour: Blue, Part suitable for: machines, Technical condition: good, Visual appearance: good, Price: On request, VAT/margin: VAT qualifying, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to vis ...

New Volvo TAD720VE this engine has been rebuilt in various machines if you are looking for we have it standing this Volvo TAD720VE. If this is not the type you are looking for, please feel free to contact us. We have the possibility to deliver various types of Volvo engines newly used or overhauled with appropriate software and in the configuration according to the engine number you specified., , = More information =, , Year of manufacture: 2025, Model year: 2021, Colour: Green, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your sit ...

New Deutz TCD12.0V06 This engine has been converted into various machines if you are looking we have it., This TCD12.0V06 333 KW -- 443 HP 1800 rpm., If you are looking for another Deutz engine, please do not hesitate to contact us., We supply any desired type of Deutz engine new, used or overhauled., With appropriate software and in the configuration according to the engine number you specified., , Weight: 950 kg, , = More information =, , Year of manufacture: 2026, Model year: 2021, Colour: Grijs, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would  ...

New Deutz TCD2012L042V this engine has been converted into various machines if you are looking we have it this Deutz TCD2012L042V. If this is not the type you are looking for, please do not hesitate to contact us. We have the possibility to supply various types of Deutz engines new, used or overhauled with appropriate software and in the configuration according to the engine number specified by you. Feel free to contact us to discuss things with each other., , = More information =, , Year of manufacture: 2025, Model year: 2021, Colour: Grijs, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, VAT/margin: VAT qualifying, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, dr ...

New Deutz TCD2012L042V this engine has been converted into various machines if you are looking we have it this Deutz TCD2012L042V. If this is not the type you are looking for, please do not hesitate to contact us. We have the possibility to supply various types of Deutz engines new, used or overhauled with appropriate software and in the configuration according to the engine number specified by you. Feel free to contact us to discuss things with each other., , = More information =, , Year of manufacture: 2024, Model year: 2021, Colour: Grijs, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? O ...

New Deutz TCD 2012L064V this engine has been converted into various machines if you are looking we have it., TCD 2012L064V 152 KW -- 203 HP 2100 rpm., If you are looking for another Deutz engine, please do not hesitate to contact us., We supply any desired type of Deutz engine new, used or overhauled., With appropriate software and in the configuration according to the engine number you specified., , = More information =, , Year of manufacture: 2025, Model year: 2020, Colour: Grey, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, VAT/margin: VAT qualifying, Type number: Exchange, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discu ...

New Deutz TCD 2012L064V this engine has been converted into various machines if you are looking we have it., TCD 2012L064V 152 KW -- 203 HP 2100 rpm., If you are looking for another Deutz engine, please do not hesitate to contact us., We supply any desired type of Deutz engine new, used or overhauled., With appropriate software and in the configuration according to the engine number you specified., , = More information =, , Year of manufacture: 2025, Colour: Grey, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, VAT/margin: VAT qualifying, Type number: Exchange, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be u ...

Offered for sale New Deutz Motor type TCD6.1L6 suitable for various construction machines., We have the possibility to supply various Deutz engines completely suitable according to your engine number., Feel free to ask us about the possibilities., , = More information =, , Year of manufacture: 2025, Model year: 2024, Colour: Grey, Part suitable for: machines, Technical condition: very good, Visual appearance: very good, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or emai ...

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 2960; Gross weight [kg]: 2960; Engine: 4045HP551-SV; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 1100

x-travel: 835 mm y-travel: 510 mm z-travel: 510 mm CNC-control: iTNC530 HEIDENHAIN table-size: 1000 x 560 mm max. table load: 800 kg spindle taper: SK 40 spindle turning speed range: 20 - 14.000 U/min feed stepless: 1 - 20.000 mm/min rapid traverse: 20 m/min drive capacity - spindle motor: 13 / 9 kW tool change unit: 32 Pos coolant: IKZ 25 bar voltage: 400 V total power requirement: 30 kVA weight of the machine ca.: 4,5 t dimensions of the machine ca.: 2,25 x 3,20 x 2,30 m chip conveyor: 3,50 x 0,85 x 1,55 m coolant equipment: 1,40 x 1,60 x 1,80 m spindle oil cooler: 0,40 x 0,50 x 1,00 m - Serial-No.: 15415041384 - Machine ON: 72,882 h - Program Run: 25.267 h - control: HEIDENHAIN iTNC 530 - Linear scales in all 3 axis - electr. handwheel - Tool changer 30 pos. with double gripper - Chip conveyor - TSC with belt filter system - Coolant unit - new ball screw incl. bearings (X-Axis) The ...

x-travel: 1000 mm y-travel: 550 mm z-travel: 500 mm CNC-control: Fanuc Oi-MD table-size: 1.100 x 500 mm max. table load: 700 kg spindle taper ISO: BT-40 spindle turning speed range: 10.000 U/min feed stepless: 24.000 mm/min rapid traverse: 36/36/30 m/min drive capacity - spindle motor: 15/11 kW tool change unit: 24 coolant: IKZ 20 bar voltage: 400 V total power requirement: 30 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,35 x 2,20 x 2,67 m chip conveyor: 2,40 x 1,50 x 1,40 m filter unit: 0,90 x 1,40 x 1,30 m Transformer: 0,60 x 0,55 x 0,55 m - Serial No..:M281361B5N D - Machine ON: 21,011 h - NC-Indexing Device Manufacturer KITAGAWA, (Call by M-Command) - control: FANUC Oi-MD - Internal coolant supply through spindle 20 bar - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 16000 mm y-travel: 3000 mm taper ISO: 50 w-axis: 1200 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Additional Specifications: Ram (mm) 380 x 380 Ram Travel (mm) 500 Including: Vertical Head ISO 50 4-Axis D.R.O. Metallic Way Covers Pendant Control The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Tea ...

x-travel: 600 mm y-travel: 700 mm z-travel: 600 mm Control: Siemens type: Millplus Table dimensions: 630x500 mm tool taper: ISO 40 Cooling through the spindle: 40 bar Tool changer: 60 Pos. no. of tables: 2 chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Milling head automatically swivels horizontally/vertically The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward ...

x-travel: . mm y-travel: . mm z-travel: . mm control: SIemens type: 840 D ECOLINE Shopmill table surface area: mm workpiece weight: kg Tool changer: 30 Fach spindle taper ISO: Spindle capacity: KW turning speeds: U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: . m Workpiece width: Max. 550 mm Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible b ...

x-travel: 1040 mm y-travel: 600 mm z-travel: 500 mm feed: 30 m/min control: Siemens type: 840 D table surface area: 1250x600 mm table load: 800 kg Tool changer: 30 Fach spindle taper ISO: SK 40 Spindle capacity: KW turning speeds: 12000 U/min total power requirement: 24 kvA weight of the machine ca.: 8,8 t dimensions of the machine ca.: . m Chip Conveyor Quick-Clamping System The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look ...

x-travel: . mm y-travel: . mm z-travel: . mm control: SIemens type: Shopmill 840 D table surface area: mm workpiece weight: kg Tool changer: 30 Fach spindle taper ISO: Spindle capacity: KW turning speeds: U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: . m Workpiece width: Max. 550 mm Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appoin ...

arm length: 6000 mm weight max. in kg: 250 kg swivelling range: . Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Crane number 1.26 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 5000 mm weight max. in kg: 250 kg swivelling range: . Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.27 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 5000 mm weight max. in kg: 500 kg swivelling range: . Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.35 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm spindle turning speed range: 12000 U/min milling-head swivable +/-: control: Heidenhain type: Mill Plus table surface area: 1000x600 mm : elktr. coolant: chip conveyor: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Spinel hours 2070 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Te ...

x-travel: 500 mm y-travel: 300 mm z-travel: 380 mm spindle stroke: 100 mm turning speeds: 40-2000 U/min Table area: 380x800 mm Feed: 10-500 mm/min Feed: 10-500 mm/min Rapid movement: 1500 mm/min spindle taper: ISO: 40 digital readout: Elesta total power requirement: 3 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,2x1,2x1,7 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your  ...

spindle diameter: 130 mm x-travel: 6000 mm y-travel: 1750 mm z-travel: 600 mm w-axis: 800 mm spindle taper: SK 50 control: Siemens 8M type: 8M mm table surface area: 1500x1300 mm Table load: . kg turning speeds: . U/min spindle motor: . kW feed: . m/min chip conveyor: coolant: x-travel: mm total power requirement: . kW weight of the machine ca.: 75 t dimensions of the machine ca.: . m Tool magazine: 60 tools The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours ar ...

weight max.: 2 t stroke: . mm clamping width: 5600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 43 ONLY BRIDGEIN LIFTING GEAR The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 3000 mm weight max. in kg: 500 kg swivelling range: . Grad total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 44 with wall bracket The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm Control: Heidemhain type: 426/430 spindle speed:: 18000 spindle taper: HSK 63 surface area: 1250x700 mm Rotary table: 700 mm Table load: 1000 kg b-axis: Schwenkopf 0,001 ° c-axis: 0-360° Rundtisch 0 B-axis C-axis Air blow through the spindle HSK 63 Electronic handwheel The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The da ...

x-travel: 560 mm y-travel: 500 mm z-travel: 450 mm table surface area: 900x520 mm turning speeds: 4000 U/min tool taper: SK 40 Control: Heidenhain type: TNC 355 : elec. coolant: total power requirement: kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the sof ...

spindle taper ISO: 40 x-travel: 710 mm y-travel: 600 mm z-travel: 445 mm Control: Heidenhain type: TNC355 mm table surface area: 1000x550 mm turning speeds: 6300 U/min quill stroke: 80 mm Feed: 1-3600 mm/min rapid traverse: 6 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The dat ...

spindle diameter: 150 mm x-travel: 4200 mm y-travel: 3000 mm dimension of the ram: 380x380 mm ram: horizontal adjustment: 500 mm spindle travel: 1200 mm Radial face slide diameter: 780 mm radial face slide travel: 250 mm rotary table:: Defum type: S-1600 Table dimensions: 1500x1500 mm table travel: 1100 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Serial no .: 6749, optional: floor plaates (Plattenfeld) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can fin ...

The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 650 mm z-travel: 550 mm control: Heidenhain Millplus tool taper: SK40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Serial Number: 71201389 with angle table 900 x +640 25-station tool changer magazine Coolant treatment Interior lighting The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad  ...