136,867 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Ficep Model: 601 DEE Excalibur Year of Manufacture: 2015 Air Pressure: 0.60 MPa Power Consumption: 13 kWh Length of Workpiece: 12,000 mm Minimum Workpiece Size: 100 × 50 × 50 mm Maximum Workpiece Size: 12,000 × 610 × 610 mm Maximum Punching Hole: 40.00 mm Bed Travel Speed: 35 m/min Spindle Speed: 1500 rpm (180–1500) Machine Weight: 2000 t Find more here - .ucymachines/ Contact us at - sales@ucymachines
4 x Demag injection moulding machines Demag 80 to BJ 2005 Demag 420 to BJ 2003 Demag 420 to BJ 2005 Demag 420 to BJ 2008
Heidenhain TNC 426/430 Year of construction 1998 Total Spindle Hours 17000 Travels X/Y/Z axis 500/380/380 mm Tool changer for 24 tools Tool holder SK40 Spindle speed 15000 rpm NC swivel rotary table 500 x 380 mm Feed speed max. 20000 mm/min Rapid traverse 30m/min Weight approx. 4000 kg Coolant Setup The machine is in very good condition. Milling spindle and axes run smoothly and very precisely.
Kodak Trndsetter Q800 with developer year 2016. Model TJ1903 developer EL125T In production X speed, 42 plates per hour software
Univ. Tool Milling Machine DECKEL Type FP 1 Masch. No. 37101 Year of construction approx. 1969 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal: 60-1200 rpm. 12 steps Motor power 1.0 and 1.5 kW pole-switchable Mains connection 380 volts, 50 Hz - Spindle speed over 2 motor speeds and 6 gear stages - Feed in the X and Z axes - Coolant device with mechanical pump in the machine foot - Quill shift on the vertical milling head 60 mm - Adjacent control cabinet Space requirements L x W x H 1000 x 900 x 1750 mm Weight 690 kg good condition Accessories: -Collets -Roundtable -Vice - Counter holder H. milling
CNC Mill, Cover, FP4-AT, 3 Axis X560/Y500/Z450 Speed range 40-4000 min-1 Control Contur-3, Mounting SK-40, weight approx. 3.4 t.
Graver grinding machine Make: Lid Model No.: S0 Built in 1994
Lid FP4-MA Contur 2 with handwheel ( universal tool milling machine ) BJ 1987
x-travel: 650 mm y-travel: 500 mm z-travel: 500 mm control: Siemens 840 D table surface area: 800 x 500 mm rapid traverse: 60 m/min table load: 1,5 t turning speed range: 0 - 18.000 U/min max. torque on the spindle: 130 Nm power capacity - milling spindle: 15 kW no. of tools in the magazine: 30 Stück tool taper: HSK 63 A | internal coolant system feed: 40 bar weight of the machine ca.: 10,5 t dimensions: 4,10 x 3,90 x 2,90 m HSC- vertical machining with 4th axis Equipment: - coolant system - 3,5 floppy disk - 4th axis - new spindle in 2019 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 650 mm y-travel: 500 mm z-travel: 500 mm control: Siemens 840 D table surface area: 800 x 500 mm rapid traverse: 60 m/min table load: 1,5 t turning speed range: 0 - 18.000 U/min max. torque on the spindle: 130 Nm power capacity - milling spindle: 15 kW no. of tools in the magazine: 30 Stück tool taper: HSK 63 A | weight of the machine ca.: 11 t dimensions: 4,10 x 3,90 x 2,90 m HSC- vertical machining with 4th axis Equipment: - coolant system - Lasersystem for tool measure - 3,5 floppy disk - 4th axis - new spindle in 2016 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 835 mm y-travel: 510 mm z-travel: 510 mm distance spindle nose and table: 120 - 630 mm control: iTNC 530 ERGOLine Heidenhain Main spindle:: turning speed range - main spindle: 20 - 10.000 min/-1 power capacity - main spindel: 13 / 9 kW tool taper: SK 40 DIN 69871 max. Torque: 130 / 87 Nm work table:: table surface area: 1.000 x 560 mm max. table load: 800 kg number of T-slots: 5 T-slot - width: 14 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 20 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 250 mm max. tool weight: 6,0 kg feeds:: rapid traverse ( X / Y / Z ): 30 m/min feed speeds: 1 - 20.000 mm/min total power requirement: 23 kVA weight of the machine ca.: 4,0 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Chip conveyor: Automatic Tool Changer: 20 pos. Coolantsystem: elektr. hand wheel: direct probin ...
Ref. no.: 18565 Manufacturer: DEMAG Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equip ...
Injection Molding Nose Demag ergotech 50/370-200 BJ 2000
Size: Max: 1.700 x 1.150 mm min: 520 x 600 mm Equipments: Vacuum Feeder Vacuum Dust Cleaner No 4 Flexo-Printing Units Bottom Printing With Ceramic Rolls & Chamber Doctor Blade Side track printing Units Electric Running Register Automatic Stacker Max. Sheet Size 1.700 x 1.150 mm Min. Sheet Size 520 x 600 mm Max. Speed 9.000 Sheets per Hour
maximum number of results exceeded
please refine your search
