126,612 used machines on RESALE, but how to find them? Machine Search
x-travel: 885 mm y-travel: 600 mm z-travel: 600 mm control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 1 - 28.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 119 / 85 Nm tool taper: HSK A63 Swivel range milling spindle: B: -10° / +110° ° spindle bearing diameter: 80 mm rotary table:: table diameter: 750 mm rotation range: C: 360 ° rotary speed: max. 100 min/-1 max. table load: 600 kg feeds:: feed speeds: 1 - 90.000 mm/min rapid traverse: 90 m/min Feed force: X/Y: 13,8 kN Feed force: Z: 10,35 kN tool magazin:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 140 mm max. tool length: 300 mm max. tool weight: 10 kg Workpiece dimension: max. workpiece height: 460 mm Max. Workpiece Area: ca. 750 x 600 mm passage: max. 600 mm total power requirement: 60 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,5 ...
SPECIFICATIONS: Number of drill bits: 35 Drilling distance mm: 32 Vertical/horizontal swivel Installed capacity KW: 2,8 Quick release Pneumatic operation
used
Siemens Somatom Definition Flash, 128 lines, built in 2011, 2 X-ray emitters Straton MX ( DoM 2021 440.000 SS / DoM 2022 installation 2023 87000 SS )
Key data: 13000 , 4200 , 110
Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column
new
New Part Number: 0206 5542 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
John Deere 1505 Series II implement carrier, 4 cyl. diesel engine 31 kw/42hp all-wheel drive, continuously variable hydrostatic drive, differential lock, adjustable steering column, cab with air conditioning (function not tested), comfort driver's seat air suspension, data confirmation DEKRA for ABE available. Equipment: None Optionally available: Schell front sickle mower FSM 3000H (rear discharge) Working width 300 cm (middle 180 cm + sides 60 cm each) Side mowers can be moved up / down by approx. 12 cm, automatic switching on and off of the side mowers when lowered/raised. Height adjustment from approx. 25mm to 110mm Sliding plate under the blade as collision protection 4 support rollers in the mower housings and front in the middle as anti-scalping rollers Extras: 3 casters Identical machine with front mower Fastback Commercial 118 (3 m) for sale as well as other mowing ...
new
New Part Number: 0291 6480 not reversible ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Catalog No. : 7418 Type: Concept 420/810-2300 Producer: Demag Made in: 2006 Characteristic: Clamping force: 420 t Closing force: 4200 kN Screw diameter: 70 mm Injection capacity: 891 cm³ Injection weight: 800 g Height of the plate for mounting the mold: 1200 mm Width of the plate for mounting the mold: 1100 mm Distance between the columns (horizontal): 800 mm Distance between the columns (vertical): 710 mm Maximum injection pressure: 1877 bar Mold height: 820 mm Machine length: 7800 mm Machine width: 2200 mm Machine height: 2400 mm Weight of the injection molding machine: 20000 kg
Specifications: - Operating pressure 16 bar - Inlet capacity up to 1100 m³/h - Refrigerant R 134 A - Drive 400 V / 2.95 kW - Space requirement approx. W 1550 x H 2200 x D 860 mm - Weight approx. 280 kg
Key data: 790 KW, 738 kVA, 400 V
Deutz / MWM Gas CHP (Container) TBG 620 V12 Landfill gas generator from 1999 with 150,200 operating hours, E40 12/22, complete (container) with cooling. 1 available, 738 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I634K2-CG, 1,100 KVA Gas engine Deutz / MWM TBG 620 V12 Manufacturer: Deutz / MWM Model: TBG 620 V12 Type: Gas Engine (Landfill Gas) Serial Number: 2200633 Power [KW]: 790 Year of construction: 1999 Hours: 150,200, E40 12/22 Weight motor and generator [kg]: 7.800 Dimensions LxWxH [cm]: – AC Generator Stamford HC I634K2-CG Manufacturer: Stamford Model No.: HC I634K2-CG Type: AC Synchronous Generator Serial number: 0103530/01 Power [KVA]: 1,100 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 1602 Speed [1/min]: 1,500 Year of construction: 1999 Weight [kg]: 2.513
Hydrovane compressor with FriulAir air dryer and flex. Compressed air pipes Brand : Gardner Denver Year of construction: 2015 Assets: 7.5 KW Rpm; 1.465 Max. pressure: 11 Bar FriulAir: (built in 2015) Type: ACT12/AC Air flow: Nom. 1,200 l/min.
Belt conveyor combination 2 x GG 750-760/650 consists of 2 piece belt conveyors each with separate drive Make: Dematic Each conveyor belt length: 750 mm Total length of the combination: 1,550 mm Width: 700 mm Belt width: 650 mm Overall width: 760 mm Conveyor speed: v = 0,7 m/sec without supports without Guide other conveyor speed frequency converter .. Please ask if needed Features: Construction year: 1999 condition: good (used) Conveying length in mm: 750 Nominal / outside width in mm: 700 Belt width in mm: 650 Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: 0,7 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hör ...
Key data: 160 KW, 200 kVA, 400 V
Diesel Emergency Generator Type PDH16N with generator 6S160PN 200 kVA, 160 kW, 400V/3Ph/50Hz Built in 1971, only 772 hours run, mainly used in a hospital as an emergency generator
Deutz 628 cylinder heads 9 Pcs available Std sized seat bores Free of cracks and weldings Used but in good condition In our stock in Istanbul Please contact : infofin-marine
volume capacity: 5,63 m³/min suction: 1 bar pressure: 8 bar turning speeds: 3000 U/min engine output: 37 kW dimensions of machine L x W x H: 1,35 x 1,05 x 1,43 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data of the pallet rack crossbeam: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbeam, used Material colour: sendzimir galvanized Box profile: 100 x 50 mm Truss type: SLB 100|15 Agraffe: 4 HK Design: Head truss Clear width: 2,695 mm 02x Safety pin, used Finish: sendzimir galvanized To secure the longitudinal members Note: The truss was flush with the agraffe flexed to the head truss. It is not possible to make any statement about the compartment load be made. Currently in stock Available: approx. 148 pcs. Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. In addition, a desired Transportation or dispatch of this item is associated with additional costs, which can be requested sep ...
Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data of the workbench: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x Workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm Clear width: 3,000 mm 08x Locking pin, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 3,200 mm Particleboard depth: 600 mm Surface: coated if necessary (possibly in two parts) 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 2,980 mm P ...
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-69T Specifications - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 510 mm - Max stroke: 410 mm - Daylight: 615 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 3400 mm - Weight: 10300.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-69T controller - Touch screen module for graphical programming in 2D and 3D - 3D visualisation for simulation and processing - 17″ high-resoluti ...
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-66T Specifications - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 410 mm - Max stroke: 310 mm - Daylight: 465 mm - Distance between side frames: 2600 mm - Max backgauge distance: 1000 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2975 mm - Weight: 8850.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-66T controller - by automatically controlling 8 axes, bending is more efficient - can store 500 programmes consisting of 25 steps and 99 repetition ...
Control: Heidenhain MillPlus, NC software: 400.00, connected load: 29kVA, length: 3100mm, width: 2400mm, height: 2450mm, weight: 5.7t. Operating hours: 50,213h, spindle hours: 9,297h. Machine is not functional, the control does not start up, cause is a defective system rack and two defective IOB80 boards. An on-site inspection is possible.
Completely overhauled fuel injector, even used ones we have all in stock
Completely overhauled fuel injector, even used ones we have all in stock
Completely overhauled fuel injector, even used ones we have all in stock
Completely overhauled fuel injector, even used ones we have all in stock
Proofing Delay Cabinet Debag Tefi 400B for max. 20 trays 600 x 400 mm fully assembled, Aggregate standard, top mounted Temperature from -10° to + 40°C max. Humidity up to 90% for the best dough shaping Computer control Interior and exterior walls made of stainless steel Connection 230V, 1.2 KW, ready to plug in DGUV V3 tested Dimensions: 792 x 715 x 2120 mm, WxDxH Used Device / Demo Device with 6 months warranty More bakery machines in stock!
Barwell Cryogenic Deflashing and Deburring Machine Freeze Trim Chamber Model BFT10
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: Deckel MAHO, milling machine table T-slot table from CNC machining center -Table surface: Ø 800 mm -T slots: Slot width 14 mm, slot spacing 63 mm -Transport dimensions: 800/800/H300 mm -Weight: 355 kg
Technical data for the pallet racking system: Shelving system: Dexion Type: P 90 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 15,100 mm Number of shelves per row of shelves: 05 pcs. Number of levels plus floor level: 06 pcs. Volume Specifications: Pallet spaces per field: 21 pcs. Pallet spaces per row: 105 pcs. Total pallet spaces: 105 pcs. Started from: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 900 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanized Type: 100|30 Profile dimensions: 100 x 100 x 3 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled (bolted truss) 12,500 mm high 1,100 mm deep 60x Pallet rack crossbeam, used Material colou ...
used
Recon Part Number: 0400 6472 12 cylinders Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.
RECON - Part number 0405 2460 - Fully polished - from a new engine ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Technical data of the pallet rack crossbar: Shelving system: Jung Heinrich Type: Delta The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: yellow Box profile: 135 x 50 mm Agraffe: 3 HK (hook) Clear width: 3,600 mm Max. load per pair of trusses 2,200 kg, with the same weight. Distributed load 02x Locking pin, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
RECON Part: ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Year of construction: 2009 CNC controller: Siemens 840D-Powerline Axes X-axis travel mm: 800 Y-axis travel mm: 800 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø800x630 Max. workpiece weight kg: 1000 Table rotation speed rpm: 8000 max. torque Nm: 980 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 180 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Signal lamp 3D quickSET ...
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 500 mm, 400 mm, 300 mm
Year of manufacture 1985 with CNC control 432 The machine is in good condition, the second machine is available as spare part machine Two identical machines available !
Groen DEE 420 tilting kettle Serial: 67305 Stainless, floor standing tilting kettle, capacity 75L, manual tilt discharge, jacketed, 3Ph
Cylinder head overhauled, ready for installation 2 pieces in stock
Key data: 195 KW, 2300 1/min
Used diesel engine Deutz BF6M1013 MC identical to: Volvo Penta D7C-B TA
The SUPERA-3015 A laser cutting machine is a general purpose type with fiber laser. It offers high dynamics in high-speed cutting of thin sheet metal, and they have the technology and know-how on board to produce stable and consistent parts even for thicker material, where the maximum thickness is limited only by the output power of the laser. Standard equipment A SUPERA 3015 comes with the following standard equipment: An automatic changing table for an almost continuous cutting process Two cutting tables with grid support Boxes for scrap and dust removal under the working area of the machine KEBA – LTI control with practically unlimited program memory Integrated laser pulse generator 21.5" touch screen operator panel with graphical user interface Mouse and keyboard Cutting head for fiber laser source Automatic selection of gas valve to ...
x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm Control: Contour - 3 / Dialog 4 total power requirement: 5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m No. 5267: Universal tool milling machines Make DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unit Working area: 300 x 300 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 400 mm y-travel: 400 mm z-travel: 500 mm Control: Sinumerik 880 total power requirement: 9 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3 x 3 x 2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm Control: Contour 3 / Dialog 4 total power requirement: 5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m No. 5268: Universal tool milling machine Make DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unit Working area: 300 x 300 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 700 mm y-travel: 560 mm z-travel: 450 mm total power requirement: 3 kW weight of the machine ca.: je 2,5 t dimensions of the machine ca.: je 332,5 m Bundle 6 x KF 3 S The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 700 mm y-travel: 560 mm z-travel: 450 mm total power requirement: 4 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 3 x 3 x 2,2 m No. 0104 Universal copy milling machine DECKEL KF 3 S built in 1979 with divided coordinate table Working area: 700 x 560 x 450 mm Drive power: 3 kW Accessories: Divided coordinate table Finishing spindle Locking arm Control handle with cable Stylus holder Collets Space requirement 3 m x 3m Weight approx. 2,380 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
