135,508 used machines on RESALE, but how to find them? Machine Search
Connecting Rod With New Bushing And Used Immediately Available
Immediately available completely overhauled in-store air coolers, we also have used ones in stock
The scope of delivery includes: 01x Reach truck, defective Manufacturer: STILL Model name: FM-12 I Total weight: 2,150 kg Nominal load capacity: 1,200 kg Nominal drive power: 6.0 kW Maximum battery weight: 788 kg Battery Voltage: 48V Year of manufacture: 03/2007 Serial Number: 611878000365 Maximum lifting height: approx. 5,870 mm Operating hours: 0,0h Total width: tines (outside) approx. 800 mm Tine length: approx. 800 mm Battery age: 2012 Extension stretcher at depth: up to 630 mm Total height: approx. 2,460 mm Overall width: approx. 1,250 mm Total depth: approx. 1,700 mm Total depth retracted with tines: approx. 1,900 mm Total depth extended with tines: approx. 2,520 mm Battery charger, used Manufacturer: Richter Forklift Model name: SE48V80A Total width: approx. 500 mm Total depth: approx. 400 mm Total height: approx. 810 mm Note: Reach truck only serves as a spare part dispenser. ...
Immediately available used shop air duct for SBA 6/8/12/16 M816
Immediately available overhauled vibration dampers, also used we have all in stock.
Dematic Heavy duty Belt Conveyor GF 1520-760-650 RA2027 Technical data: Conveyor length (NL): 1520 mm Framework width (NB): 760 mm, 1110 mm with motor and movi mot belt width (GuB): 650 mm height (BH): 140 mm support feet: optionally available Conveying speed (v m/s): adjustable between 0,025 and 0,883 m/s with frequency converter Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Feature: Massive design, belt run surface metal instead of wood Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 1520 Nominal / outside width in mm: 760, 1110 Belt width in mm: 650 Driven: YES Engine type: SEW Movi-Mot KW: 0,55/S1 Conveyor speed m / s: freely adjustable, 0,025 - 0,883 scope of delivery: without supports and side guides, includ ...
DUE TO NEW ENGINE THIS VERY WELL FUTILIZED DEUTZ DRIVE ENGINE FOR SALE
DECKEL MAHO DMC 63 V CNC vertical machining center was built in Germany in 2005. The machine used in series and unit production, is characterised by its high machining capacity and stable construction with a reinforced work table, which ensures the highest possible precision in milling. The installed FANUC 180i-MB CNC controller additionally guarantees trouble-free operation of the machine and the use of its full potential and capabilities. The DECKEL MAHO GILDEMEISTER CNC machining center has been serviced on an ongoing basis and has worked for 26040 hours to date. Technical data of the DECKEL MAHO DMC 63 V milling center - work table dimensions (L x W): 800 x 500 mm - feed rates in the X/Y/Z axis: 630/500/500 mm - positioning accuracy of the X,Y,Z axis: 0.010 mm - maximum spindle rotational speed: 10000 rpm - spindle taper: SK 40 - 24-position tool magazine - operating hours: ...
used
On offer is a used D 36 S Delta Hybrid engine in good condition. If you have any questions, please do not hesitate to contact us.
CNC Machining Center Vertical DECKEL-MAHO - DMC 635 V Built in 2006 in good condition. Control iTNC 530 Heidenhain Duty Cycle: 35172 Hours: 5903 Specifications: x-travel 635 mm y-travel 510 mm z-travel 460 mm Main Spindle: Speed range - main spindle 20 - 8,000 min/-1 Drive power - main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Max. torque 83 / 57 Nm Clamping force 8 kN Workbench: Table clamping surface 790 x 560 mm Number of T-slots 4 + 1 T-slots - spacing 100 mm T-slots - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg Table height above floor 720 mm Distance between spindle nose and table 120 - 580 mm Tool changer: Number of tool slots 20 pos. Max. tool width 80 / (130) mm max. tool length 250 mm max. tool weight 6.0 kg max. total weight 80 kg Tool - Tool change time 1.6 sec Changeover time span - span 6.0 sec Feeds: Rapid traverse 30 m/mi ...
CNC Machining Center Vertical DECKEL-MAHO - DMC 63 V Built in 2002 in good condition. Control Heidenhain TNC 430 Heidenhain Hours: 10985 Specifications: Main spindle Speed range - main spindle 20 - 8,000 rpm Drive power - main spindle 13 / 9 kW Max. torque 83 / 57 Nm Tool holder SK 40 Workbench: Table clamping surface 800 x 500 mm max. table load 500 kg Installation height max. 240 mm Number of T-slots 5 T-slots - width 14 H12 mm T-slots - spacing 100 mm Distance between spindle nose and table 150 - 650 mm Feeds Feed rate X, Y, Z: 30,000 mm/min Rapid traverse ( X / Y / Z ) 30 m/min Tool changer: Tool changer 24 pos. max. tool diameter 80 mm max. toolthrough. with a free neighbor's box. 140 mm max. tool length 300 mm max. tool weight 7 kg Total power requirement 30 kVA Machine weight approx. 4 t Space requirement approx. 4.0 x 3.5 x 2.7 m Accessor ...
Control Heidenhain TNC 620 Travel X/Y/Z: 1035/560/510 mm, Spindle speed: 12,000 min-1, Tool magazine for 30 Wkz., SK 40, Cooling by the spindle 12 bar, Conveyor
SPECIFICATIONS: Number of drill bits: 35 Drilling distance mm: 32 Vertical/horizontal swivel Installed capacity KW: 2,8 Quick release Pneumatic operation
used
Siemens Somatom Definition Flash, 128 lines, built in 2011, 2 X-ray emitters Straton MX ( DoM 2021 440.000 SS / DoM 2022 installation 2023 87000 SS )
Key data: 13000 , 4200 , 110
Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column
This 5-axis DECKEL MAHO DMU 50 was manufactured in 2005. It features a digital swivel rotary table with a diameter of 630 mm and a maximum table load of 200 kg. The machine offers a rapid traverse of 24 m/min and a spindle speed range of 20 - 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 50 vertical machining centre we have for sale. Contact us for further details.
new
New Part Number: 0206 5542 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
John Deere 1505 Series II implement carrier, 4 cyl. diesel engine 31 kw/42hp all-wheel drive, continuously variable hydrostatic drive, differential lock, adjustable steering column, cab with air conditioning (function not tested), comfort driver's seat air suspension, data confirmation DEKRA for ABE available. Equipment: None Optionally available: Schell front sickle mower FSM 3000H (rear discharge) Working width 300 cm (middle 180 cm + sides 60 cm each) Side mowers can be moved up / down by approx. 12 cm, automatic switching on and off of the side mowers when lowered/raised. Height adjustment from approx. 25mm to 110mm Sliding plate under the blade as collision protection 4 support rollers in the mower housings and front in the middle as anti-scalping rollers Extras: 3 casters Identical machine with front mower Fastback Commercial 118 (3 m) for sale as well as other mowing ...
new
New Part Number: 0291 6480 not reversible ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Catalog No. : 7418 Type: Concept 420/810-2300 Producer: Demag Made in: 2006 Characteristic: Clamping force: 420 t Closing force: 4200 kN Screw diameter: 70 mm Injection capacity: 891 cm³ Injection weight: 800 g Height of the plate for mounting the mold: 1200 mm Width of the plate for mounting the mold: 1100 mm Distance between the columns (horizontal): 800 mm Distance between the columns (vertical): 710 mm Maximum injection pressure: 1877 bar Mold height: 820 mm Machine length: 7800 mm Machine width: 2200 mm Machine height: 2400 mm Weight of the injection molding machine: 20000 kg
Max. pressing force: 150t, bending length: 4050mm, backgauge: 750mm, control: Cybelec CNC 7200 P, weight: approx. 15t. Equipped with hydraulic tool clamping, crowning system, height-programmable backgauge, two control panels and two pneumatic bending aids. Including stand with various upper tools and dies as well as various special accessories manufactured in-house. Documentation available. An on-site inspection is possible.
Key data: 600 mm, 200 mm
Machine : Rigid angle tables for milling machines Make : EMCO unused – slight traces of storage Clamping surface : 600x200mm, 4 T-slots 12mm, spacing 45mm Vertical: Hole spacing: 90mm/390mm, for T-slot 12mm Dimensions: Length : 60cm ; Width : 20 ; Height : 18cm; Weight: 44 kg PRICE : € 480,- Even larger MAHO or lids, ... Mounting plates: A - Length : 240mm ; Width : 120mm ; Height : 35; 3 T-slots 11mm spacing 45mm, (1x) PRICE : € 100,- B - Length : 420mm ; Width : 125mm ; Height : 46; 2 T-slots 11mm Distance 90mm (4x) PRICE : € 100,- C - Length : 520mm ; Width : 180mm ; Height : 56; 3 T-slots 12mm Distance 45mm (1x) PRICE : € 150,- D - Length : 600mm (660); Width : 180mm ; Height : 75; 2 T-slots 12mm Distance 90mm (3x) PRICE : € 180,-
Specifications: - Operating pressure 16 bar - Inlet capacity up to 1100 m³/h - Refrigerant R 134 A - Drive 400 V / 2.95 kW - Space requirement approx. W 1550 x H 2200 x D 860 mm - Weight approx. 280 kg
Belt conveyor combination 2 x GG 750-760/650 consists of 2 piece belt conveyors each with separate drive Make: Dematic Each conveyor belt length: 750 mm Total length of the combination: 1,550 mm Width: 700 mm Belt width: 650 mm Overall width: 760 mm Conveyor speed: v = 0,7 m/sec without supports without Guide other conveyor speed frequency converter .. Please ask if needed Features: Construction year: 1999 condition: good (used) Conveying length in mm: 750 Nominal / outside width in mm: 700 Belt width in mm: 650 Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: 0,7 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hör ...
Machine : Rigid angle tables for milling machines Make : EMCO unused – slight traces of storage Clamping surface : 600x200mm, 4 T-slots 12mm, spacing 45mm Vertical: Hole spacing: 90mm/390mm, for T-slot 12mm Dimensions: Length : 60cm ; Width : 20 ; Height : 18cm; Weight: 44 kg PRICE : € 480,- Even larger MAHO or lids, ... Mounting plates: A - Length : 240mm ; Width : 120mm ; Height : 35; 3 T-slots 11mm spacing 45mm, (1x) PRICE : € 100,- B - Length : 420mm ; Width : 125mm ; Height : 46; 2 T-slots 11mm Distance 90mm (4x) PRICE : € 100,- C - Length : 520mm ; Width : 180mm ; Height : 56; 3 T-slots 12mm Distance 45mm (1x) PRICE : € 150,- D - Length : 600mm (660); Width : 180mm ; Height : 75; 2 T-slots 12mm Distance 90mm (3x) PRICE : € 180,-
Key data: 160 KW, 200 kVA, 400 V
Diesel Emergency Generator Type PDH16N with generator 6S160PN 200 kVA, 160 kW, 400V/3Ph/50Hz Built in 1971, only 772 hours run, mainly used in a hospital as an emergency generator
Deutz 628 cylinder heads 9 Pcs available Std sized seat bores Free of cracks and weldings Used but in good condition In our stock in Istanbul Please contact : infofin-marine
volume capacity: 5,63 m³/min suction: 1 bar pressure: 8 bar turning speeds: 3000 U/min engine output: 37 kW dimensions of machine L x W x H: 1,35 x 1,05 x 1,43 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data of the pallet rack crossbeam: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbeam, used Material colour: sendzimir galvanized Box profile: 100 x 50 mm Truss type: SLB 100|15 Agraffe: 4 HK Design: Head truss Clear width: 2,695 mm 02x Safety pin, used Finish: sendzimir galvanized To secure the longitudinal members Note: The truss was flush with the agraffe flexed to the head truss. It is not possible to make any statement about the compartment load be made. Currently in stock Available: approx. 148 pcs. Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. In addition, a desired Transportation or dispatch of this item is associated with additional costs, which can be requested sep ...
Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data of the workbench: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x Workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm Clear width: 3,000 mm 08x Locking pin, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 3,200 mm Particleboard depth: 600 mm Surface: coated if necessary (possibly in two parts) 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 2,980 mm P ...
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-69T Specifications - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 510 mm - Max stroke: 410 mm - Daylight: 615 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 3400 mm - Weight: 10300.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-69T controller - Touch screen module for graphical programming in 2D and 3D - 3D visualisation for simulation and processing - 17″ high-resoluti ...
Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBO-3117-CNC Delem DA-66T Specifications - Nominal pressure: 1750 kN - Max working length 3100 mm - Throat depth: 410 mm - Max stroke: 310 mm - Daylight: 465 mm - Distance between side frames: 2600 mm - Max backgauge distance: 1000 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2975 mm - Weight: 8850.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): independent control of Y1 and Y2 axes by servo drive - Type of punch holder: AMADA quick-action clamping Delem DA-66T controller - by automatically controlling 8 axes, bending is more efficient - can store 500 programmes consisting of 25 steps and 99 repetition ...
Completely overhauled fuel injector, even used ones we have all in stock
Completely overhauled fuel injector, even used ones we have all in stock
Completely overhauled fuel injector, even used ones we have all in stock
Completely overhauled fuel injector, even used ones we have all in stock
Barwell Cryogenic Deflashing and Deburring Machine Freeze Trim Chamber Model BFT10
Technical data for the pallet racking system: Shelving system: Dexion Type: P 90 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 15,100 mm Number of shelves per row of shelves: 05 pcs. Number of levels plus floor level: 06 pcs. Volume Specifications: Pallet spaces per field: 21 pcs. Pallet spaces per row: 105 pcs. Total pallet spaces: 105 pcs. Started from: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 900 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanized Type: 100|30 Profile dimensions: 100 x 100 x 3 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled (bolted truss) 12,500 mm high 1,100 mm deep 60x Pallet rack crossbeam, used Material colou ...
used
Recon Part Number: 0400 6472 12 cylinders Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.
RECON - Part number 0405 2460 - Fully polished - from a new engine ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
maximum number of results exceeded
please refine your search
