van de graaf used for sale

6 denis prive grain silos, D 8 meters, 15 rings a.1.15 m, DIN 1055, catwalks, temperature measurement, Schmidt Seeger trough chain conveyor, elevator etc.

I sell a Top Dubel drill multi-spindle drill Detel M-13, built in 2007. 3-spindle See good condition. Available the same.

Gear motor, electric motor -Speed: 80 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 450/270/H175 mm -Weight: 20 kg

Gear motor, electric motor, three-phase motor -Power: 0.55 kW -Speed: 110 rpm -Shaft: Ø 20 mm -Construction: B5 angle -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 450/270/H175 mm -Weight: 20 kg

Description Hazardous substance storage Denios PSE-4 450 litres Storage area integrated Collection volume 450 l Material Polyethylene (PE) Capacity KTC/IBC1 Storage area Material Polyethylene (PE) Substructure with support feet Forklift movable load capacity 1250 kg Approval of building authority approval (DIBt) Classification of liquids hazardous to water acute, chronic GHS 1, chronic GHS 2, chronic GHS 3, chronic GHS 4 Classification according to GefStoffV/BetrSichVOn metals corrosive, corrosive, skin corrosive, heavy Eye damage causing color blue

Gear motor, electric motor, three-phase motor -Speed: 89 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg

Gear motor, electric motor -Speed: 185 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg

Due to new motorization in the rotating state Removed The engine was installed by us at that time and from 0 to 53,000 turning hours with us very well fought

Gear motor electric motor -Speed: 197 rpm -Power: 0.55 kW -Construction: hollow shaft angle B5 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 460/230/H170 mm -Weight: 20 kg

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm table surface area: 1250 x 700 mm NC-rotary table: integriert, 700 mmø spindle taper: SK 40 spindle taper: DIN 69871 spindle turning speed - stepless: 20 - 12.000 U/min control: HEIDENHAIN control: TNC 430 feeds x/y/z -stepless: 20 - 15.000 mm/min rapid traverse: 30 m/min ATC: 32 (2 x 16) Pos tool diameter: 80 / 130 mm workpiece length: 315 mm weight of tools max.: 8 kg NC-rotary table - speed -: max. 15 U/min table load: 600 / 500 kg total power requirement: 60 kW weight of the machine ca.: 9,6 t = 5-axis machining center, table clamping surface 1250 x 700 mm with integrated NC-rotary table (=4th axis), movement of milling head via control (=5th axis) Accessories: electron. handwheel, chip conveyor (snailconveyor), coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

friction wheel, running wheel, bridge crane, hall crane, assembly crane, workplace crane -Friction wheel travel drive for: Demag crane -Wheel diameter: 270 mm -Wheel width: 90 mm -Quantity: 2 pieces available -Price: per piece -Dimensions: 390/120/H290 mm -Weight: 38 kg/piece

Electric motor, three-phase motor -Handover: in the current condition as seen -Brake: dismantled -Power: 1.8KW -Speed: 1375 rpm -Shaft: Ø 24 mm -Type: B5 -Protection class: IP 54 -Dimensions 360/200/H250 mm -Weight 19.5kg

front mowers; Intermediate axle mower John Deere tractor for 2000 PTO

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Adjustment: SK50 -Tool holder: M20 -Price: for both recordings -Weight: 16 kg

Electric motor, three-phase motor -Motor: unused -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B35 -Protection class: IP 55 -Number: 27x motors available -Price: per piece -Dimensions: 450/340/H299 mm -Weight: 44 kg

Three-phase motor, electric motor -Motor: is unused -Power: 15 kW -Speed: 2900 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 590/420/H380 mm -Weight: 88 kg

clamping diameter: max. 17,5 mm grinding spindle speed: 4500 U/min relief angle: max. 45 ° total power requirement: 0,55 kW weight of the machine ca.: 120 kg dimensions of machine L x W x H: 0,54 x 0,47 x 1,31 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cloth Puller Oven Schiesser Pull-off Cup NEW 160/180cm Stove Depth -Aluminium cloth pull-off board furnace slider NEW -with undercoat -for 160 / 180cm depth -Pullers are 194cm long -with stainless steel trolley on 4 swivel castors -External dimensions of the carriage: 206x61cm and 182cm high

electric motor, three-phase motor -Power: 5.5 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: IP 54 Quantity: 1 piece available -Dimensions: 385/320/H265 mm -Weight: 41 kg

Eirich mixer 1 x double room 22- 1500 liters, year of construction 1967, 1 x DEV 22 - 2500 liters, year of construction 1973, incl. 2 elevator tracks and various belts, SPS BIKOTRONIC, from location, immediately available

Gear motor, electric motor, three-phase motor -Speed: 62 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Weight: 25 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 210 mm -Flange: Ø 185 mm -Hole circle: Ø 190 mm -Through hole: Ø 67 mm -Weight: 12 kg

No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3216-CNC Delem DA-58T Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3400 mm - Width: 1800 mm - Height: 2760 mm - Weight: 9000.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-actio ...

Equipment: Transnorm belt conveyor 90 degrees Left version, bandwidth 60 cm, height approx. 86 cm, Drive 400V

Ceia Metal Detector 450 x 145mm aperture. 400mm conveyor width. Right to left production. Push reject system. New conveyor belt fitted. 730mm line height with adjustable feet. M&S Spec.

Bearing bushings, half-shell, drill bushing -Number: 6x AL 16065 (John Deere) Price: complete -Weight: 2.1 kg

Engine Deutz 4-cylinder 75kw Identifier : - for scope of delivery and condition: See picture gallery The part is technically in good condition, nevertheless, this is a used items, which shows signs of wear. comes from: Extec Screens&Crushers 06 / 2007 Mileage: approx. 20 . tkm Internal number : 565 725

Pistons 2 pieces Ø 106.5 mm Diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41.278 mm -Total price: 2 pieces -Weight: 1.4 kg/piece

Pistons 4 pieces Ø 106.5 mm Diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41.278 mm -Complete price: 4 pieces -Weight: 1.4 kg/piece

Piston 3 pieces Ø 106.5 mm diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41,278 mm -Complete price: 3 pieces -Weight: 1.4 kg/piece

CINTEX METAL DETECTOR Usable aperture size 500mm (wide) x 100mm (high) 350mm wide conveyor belt Full length 1200mm Line height 930mm Stop on detect Right to left production direction

pneumatic power clamps, horizontal clamps, compact clamps, clamping devices, pneumatic power clamps -Type: 82L32-143C8H0 -Quantity: 4 available -Price: per piece -Weight: 2.1 kg/piece

Roller chain, drive chain -Type: AZ22521 -Weight: 2.1 kg

Collet holder, tool holder, tool holder, milling holder, milling tool, short-shaft system -Manufacturer: DEPO, milling mount SK50 -Type: 100 5 77 -Milling tool holder: conical, Ø 34/24 mm M16 -Dimension total Ø97x385mm -Weight: 5.9 kg

Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Manufacturer: DEC, ventilation hose, original packaging -Type: Greydec 100 - 152mm x 6 meters -ART.code: DG1152/6 -Cardboard dimensions: 400/175/H175 mm -Weight: 1.7 kg

Gear motor, electric motor, electric gear motor, crane motor, crane drive -Manufacturer: DEMAG, gear motor from folding machine Lotze HDZK -Type: 24/14K4 -Speed: approx. 60 rpm -Shaft: Ø 45 x 70 mm -Motor: 5 kW / 1420 rpm -Voltage: 220/380V -Dimensions: 980/400/H410 mm -Weight: 255kg

Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Manufacturer: Demag, crane chassis -Beam width: up to 163 mm -Load capacity: 500 kg -Dimensions: see technical drawing in the photos -Dimensions: 250/243/H180 mm -Weight: 15 kg

Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

360 x 140mm aperture. 300mm conveyor width. 900mm line height with adjustable wheels. 1600mm machine length. Stop on detect. Left to right production.

Safeline metal detector Stainless metal detector, belt dimensions 700mm x 300mm, aperture 350mm x 185mm, stop / start with alarm, mobile, 1Ph

Denison Hydraulic P7P Slewing and Luffing Pump available for Sale. Make: Denison - Hydraulic 4Pcs Type: P7P 3R1A 5A2 B M2 04994 Serial Number: 89127 2912 49 7138 Rotation: 201024 Code No.: 023 04994 USA

Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: Siemens, Simatic S 5 fan assembly from Demag D 100-275 NC injection molding machine -Type: 6ES5 981-0 HA 11 -Voltage: 230/115V -Dimensions: 490/175/H265 mm -Weight: 2.9 kg

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2016 S25 003004 400 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) CCD camera and monitor Dividing head Sk 40 with dividing disk 24 R 1 dividing disk each 14, 16, 18 Tightening screw M 16 Counter bearing complete with 4 center punch points Center point Sk 40 with driver Twist-u. Relief grinding device with rac ...

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, FL Switch, 5-port Fast Ethernet Switch, Controller Ethernet -Manufacturer: Wago, controller Ethernet switch from injection molding machine Demag D 100-275 NC -Type: 750-842 -Dimensions: 70/50/H100 mm -Weight: 0.2 kg

Flat belt pulley, toothed pulley, multi-belt pulley, belt pulley, timing belt pulley -Manufacturer: Desch, timing belt pulley Ø 255 mm - Pitch: 14 mm / Belt width 55 mm -Receipt: Ø 40 x 50 mm taper bushing Desch 3020-40 -Dimensions: Ø 255 x 70 mm -Weight: 16.3 kg

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine as new Accesories: SK 40 dividing head with 24 R dividing disc Graduated disc 20 R Tightening screw M 16 69871 Spiral and relief grinding device with rack housing Counter bearing with 4 tailstock centres Center point with driver Dressing device Dressing diamond Radius grinding device SK 40 complete with se ...

BOMAG BW 200 Roller / Pneumatic Compactor, 7 to, 4 Zyl Deutz Motor, Vibration full working, German Machine, Year 1977

Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control -Manufacturer: DEMAG Mannesmann Dematic, crane control PNN-BUS-3 -Type: RC-E 10 -Total dimensions: 380/180/H125 mm -Weight: 2.2 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, crane remote control with cable -Cable length: 5.85 m -Connector: 24-pin -Dimensions: 850/400/H150 mm -Weight: 10.5 kg

BEING NEGOTIATED Sumitomo Demag 280 ton Systec SP 280/630-840 year of manufacture 2014 280 Ton Clamp 2800kn Tie Bar Dist 630 Injection unit 840 Made in Schwaig, Germany 400v 50hz Exworks South America