vacuum used for sale

unused in box; equipped with 2 swivel wheels; drain hose; 3 motors can be switched on separately; various attachments; stainless steel reservoir of 80 liters capacity; 3866 ; Auction-ID: A1-45901-520

unused in box; equipped with 2 swivel wheels; drain hose; 3 motors can be switched on separately; various attachments; stainless steel reservoir of 80 liters capacity; 3866 ; Auction-ID: A1-45901-518

76dB low sound; accessories; 5.3kg; Auction-ID: A1-45901-1033

unused in box; 4 engines; various accessories; equipped with 2 swivel wheels; 60 liter capacity; 3825 Auction-ID: A1-45901-514

unused in box; 4 engines; various accessories; equipped with 2 swivel wheels; 60 liter capacity; 3825 Auction-ID: A1-45901-516

76dB low sound; accessories; 5.3kg; Auction-ID: A1-45901-1032

unused; packed in the original box; 3508; Auction-ID: A1-45901-513

80dB low sound; accessories; 19kg; 6440 Auction-ID: A1-45901-1035

unused; packed in the original box; 3508; Auction-ID: A1-45901-511

80dB low sound; accessories; 19kg; 6440 Auction-ID: A1-45901-1034

unused in box; equipped with 2 swivel wheels; drain hose; 3 motors can be switched on separately; various attachments; stainless steel reservoir of 80 liters capacity; 3866 ; Auction-ID: A1-45901-521

unused in box; 4 engines; various accessories; equipped with 2 swivel wheels; 60 liter capacity; 3825 Auction-ID: A1-45901-515

Overview  The filler + capper block was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to process explosive products. The machine can be purchased with warranty.  Technical data  Fully automatic rotary filler Filling system: mass flow meter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Max. container dimensions: Height: 50-300 mm, Ø: 20-100 mm Pressurized feed tank for constant flow through flow meter  Below level filling to avoid foam formation during filling  Adjustable bottle neck centering  Electr. level measurement  CIP capable  Designed for riser pipe processing Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting an ...

Overview  This vacuum filler was built in 1998 by Italian manufacturer GAI. In 2024 the machine was fully refurbished and is available immediately.   Technical Details    Effective Capacity: approx. 4,500-5,000 bottles/hour  Machine equipped for the following bottle formats: Bordeaux 75cl (diameter 78mm) - Burgundy 75 - 37.5cl - Magnums  Rinser with 20 clamps, inspected  Filler with 20 taps and vacuum system (new turbine) - taps inspected, new gaskets. New seating springs.  AROL Saturno Capper with 4 heads and vacuum - semi-new jaws in perfect condition - new vacuum pump and circuit  New wine inlet solenoid valve  Plug for feed pump  Machine newly refurbished (solenoid valve, jaws, vacuum turbine, gaskets, vacuum pump)  Electrical supply: 400 Volts / 50 Hz, 3 phases  Dimensions:  Long 380cm x Wide 140cm x High 250cm  Weight: 3500 kg   

Overview  This low-pressure vacuum filler was manufactured in 2004 by MBF. The machine was in use until 2017 and was fully functional at the time of shutdown. It was replaced due to the increased demand for carbonated products, which required a different filling principle (counter-pressure). Since then, the machine has been stored dry and protected, with only minor dust present. It is promptly available for sale. Technical data  Capacity: 6,000 bph (1.0 l bottles) 7,000 bph (0.75 l bottles) Bottle diameter: 55–120 mm (via steplessly adjustable in/outfeed stars) Bottle height: 150–370 mm Number of filling valves: 36 Filling principle: Low-pressure vacuum filling Running direction: Left to right Filling valve type: Electropneumatic Special features: Programmable bottle parameters with automatic adjustment for bottle height and fill level Hot filling capable with auto shutdown at temp ...

working table size: 3000 mm x 1500 mm; emergency stop switch: no; operational vacuum: -0,85 bar; vacuum pump output: 40 m³/h; pump capacity: 1,5 kW; noise level: 70 Db; heating system temperatur: max. 200 °C; heating system: 16 kW; machine length: 3100 mm; machine width: 1650 mm ; machine height: 1100 mm; weight: 850 kg; Membrane vacuum presses of TF series are specially designed for preheating and shaping of solid surface materials (Corian, Hi Macs, Staron, Hanex, Kerrock and others), as well for acrylic material and for thermoplastic forming. TF series vacuum presses are combined solution of including functions of two separate machines: vacuum press and preheating oven, and this greatly increases functionality of the press.  Thermoforming Preheating and 2D and 3D vacuum forming of thermoplastic and acrylic materials. Production of worktops, sinks, shells, bar counte ...

table size: 3000mm x 1500mm; pressure: -0,85 bar; machine length: 3100mm; machine width: 1450mm; weight: 480kg;

table size: 3000mm x 1500mm; pressure: -0,85 bar; machine length: 3100mm; machine width: 1450mm; weight: 425kg;