vacuum used for sale

130 litre ALPINA SWOPPER SW 130-S checked function, loader,unloader

ALCO Tiler ASP 400 HDI fully refurbished

Height=1.35 m, Overall length= 0.84 m, Overall width= 1.57 m, Net weight= 356 kg,

Vacuum tube lifter with a maximum load capacity of 65 kg for various suction cups; currently equipped with the 'single suction cup long', e.g. for pallets, narrow cartons, beams, square tubes and other elongated workpieces. The scope of delivery includes suction cup, hand control unit (BE65-300/500-BEW+RA), lifting unit (JU-65-E-DUMMI), feed hose, vacuum generator (SBB-SBL-ST-VZ/ABS), main switch and (vertical) crane column (SKJ4-65-VARIABEL).

Cutter Mado MSM 764 SL, 50 litre bowl, completely in stainless steel, built in 2014, Stepless knife shaft up to 5000 rpm, mixing cycles, 2 bowl speeds, 3 cutter head, connection 400 V, 32 kW, Dimensions LxWxH approx. 125x100x115cm, weight approx. 768kg, very good used condition, fully functional

Quiel AAGS Filling Line for Pieces of Meat/Gyros/Gullasch For sale is a filling line from the manufacturer Quiel, model AAGS, specially developed for the processing and filling of pieces of meat Operation of the system: The meat to be processed is filled into the storage container using a lifting and tilting device. There it is continuously moved by the mixing device and then transported to the dosing belts via screw conveyors at the bottom of the container. A squeegee ensures an even distribution of the product on the belts. At the end of the dosing section, the meat falls through discharge chutes into the trays or containers below. The dosing time can be set individually, which allows the portioning to be precisely controlled. If a single portion does not reach the desired amount, the control system allows for a double ejection, in which two portions are filled into the same cont ...

An unused Fezer sheet metal vacuum lifter is available. Load capacity: 1000kg, max. sheet dimensions X/Y: 6000mm/2000mm, weight: approx. 200kg. An on-site inspection is possible.

PVS natural casing welding devices replace the knotting of the sausage ends or the closure of the sausages with a clip The system is suitable for natural casings, sheep casings and pig casings. The advantage to conventional applications is that there is no need to remove knots or clips before packing

General SKUCX003 MakeBHS Werk Sonthofen Maschinen- und Anlagenbau GmbH LocationBarneveld TypeFEST A9 -UNI Main Features MaterialStainless steel Motor15 KW Surface2.16 m2 Specified Features - Rotating vacuum filter MaterialStainless steel 1.4571 (316Ti) Rotating vacuum filtercheck Rotary pressure filter Filter surface2.16 m² Drum sizesDia. 800x1800 mm Motor15 kW, 690/400 volt, (EExdellCT4) With variable speed drivecheck Drum speed300-1500-1800 rpm Information No.300263 Year of construction1994 Floorspace2,80x1,90 m Total height2,30 m Weight±7600 kgRotating vacuum filtersBHS SonthofenFilters > Rotating vacuum filtersBrand > BHS Sonthofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...

Height 1550 mm Width 2950 mm Length 1750 mm Weight 4100 kg Capacity 200 l Electrical Supply: 400V 50Hz 3N Total power 78 kW Main Material Stainless Steel, Acid Resistant Cutter type Vacuum bowl cutter Construction of the cutter bowl Stainless steel, acid-resistant Number of knives on the head 8 pcs. Vacuum cutter. Additional functions for heating or cooling the bowl

General SKU371T1118 LocationBarneveld MakeEdwards Pressure Vacuum possiblecheck Main Features MaterialMild steel Volume400000 Ltr. Motor3.7 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck Number of pumps:2 Capacity400m³/h With motor2,2kW, 220-240/380-415 With motor1,5kW, 220-240/380-415 Inlet100 mm Outlet25 mm Information TypeA38513935 Mach.No.297 Year of constructionunknown Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck(as is) Floorspace009x0,55 m Total height1,15 m Weight350 kg Extra Specificationsmachine is a 2-stage vacuum pump. Consisting of: Edwards Mechanical booster model EH 500A Edwards High Vacuum Pump model E2M 80 Vacuum pumpsEdwardsPumps > Vacuum pumpsBrand > Edwards What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping  ...

Unused Vacuum Pump SHII LEMA51AZ

The pictured cutter is sold by MADO of the type Garant MSK760 H II with a volume of 35 litres. The cutter is made entirely of stainless steel, it has a 6 mm cutter head with an additional spare blade set and comes with an operating manual. The cutter has the following technical data: Bowl volume: 35 litres Number of knives: 6 Speed: 1750-3500 rpm Bowl speed: 12/24 rpm Knife shaft power: 9/11kW Voltage: 400V Fuse: 32A (slow-blow) Dimensions: 1240x890x1130H (1240x1260x1740H with lid open) Footprint: 1040x550mm Weight: 430kg Keys for the cutter head and documentation are part of the machine The machine runs neatly and smoothly, video of the test run available Only the noise protection cover has a crack, but this was professionally glued by the previous owner.

Cutter Capacity: 25 liters Voltage: 380V / 50Hz / 3 phase Power: 1.5kW Speed: 1000-2000 rotating/min Dimensions: 85x67x70cm Packing size: 93x78x71cm With a temperature probe and the net

Filling machine Frey Heinrich 20, Piston filler with a capacity of 20 litres, machine mounted on a mobile base, Connection 400V, dimensions LxWxH approx. 60x55x120cm, very good used condition, fully functional

Cutter Seydelmann K60U, 60-litre bowl, Machine completely in stainless steel, 2 speeds, mixing passes, with 6mm cutter head, spare knife, cutter head wrench, Connection 400V, 22kW, dimensions LxWxH approx. 125x100x128cm, weight approx. 790kg, good used condition, fully functional

- Filter area: 2.5m2 - Year of construction: 2001 - Vacuum pump in DIN 1.4404 - Incl. mixing tank with agitator. - With equipment for residual filtration - Flow rate (mucus): 450-500 l/h Dimensions: - Depth: 1400 mm - Length: 2100 mm - Height: 1900 mm - Machine with very few operating hours - Machine in perfect condition

GT-5375 Cooling Vacuum Tub - Stainless steel - For 6 meter pipe for a maximum pipe of 400 mm diameter

We sell here a vacuum tumbler with cooling from the manufacturer Günther, type GPA 200K in a good used and functional condition. The machine was built in 2004, runs on 400 volts, 1.5 kW, completely stainless steel, rollable, container tiltable, volume 200 liters, capacity 140 kg, programmable control, workshop tested, immediately ready for use, dimensions W/D/H 175/82/160 cm, others on request.

GT-5392 Two Bathtubs for Cooling and Vacuum - Brand: VIRGINIO MAI - Model: VCT 63/125 - With 3m vacuum aluminum tub and 2.5m cooling stainless steel tub

used vacuum thermoforming machine from Illig in very good condition little used immediately ready for use Dimensions 6 by 5 meters incl. control cabinet and corresponding phereperie devices Pictures to follow

M. No.: 070068681 Equipment / Additional information: Hz: 50/60 V250/300 m3/h P 100 hPa (0.1 bar)

M. No.: 43954 Equipment / Additional information: Vacuum: 20 mbar Motor Oil: Type SAE 30 Qt.: 6 Ltr.

Handtmann VF 50 incl. turning device and complete accessories

Extended twisting gear for Vemag filling machine Robby or DP, to put a metal detector in between, functional, smooth-running, very good used condition.

Extended twisting gear for Vemag filling machine Robby or DP, to put a metal detector in between, older model, functional, smooth-running

Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar

Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar

VALOREL Stainless Steel Vessel 620 Ltr. with propeller stirrer, allowed pressure 2,5/-1bar, max. temp 150C , on top there is a inlet 50mm for clamp connection, down outlet valve diameter 2"

The Ilpra FS 5000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request., Cup Diameter: 95 mm Outside diameter , Filling Range: 50-500 grams , Capacity: 4800 cups/Hour , Stations: Cup Dispenser -> Filling -> Aluminium Lid Applicator -> Sealing -> Date Stamping -> Out-feed Conveyor , Guarding: Fully Enclosed Cabin , Control Panle: S ...

We are selling here a vacuum tumbler from the manufacturer Günther, type GPA 200K in a good used and functional condition. The machine was built in 2009, runs on 400 volts, 1.5 kW, completely stainless steel, rollable, container tiltable, volume 200 liters, capacity 140 kg, programmable control, without cooling, workshop tested, immediately ready for use, dimensions W/D/H 175/82/160 cm, others on request.

Kilia TK20 Table Cutter 20 litre solid stainless steel bowl 2 courses 6 mm cutter head Spare blade set and fork locks included 400V Stainless steel housing smooth and smooth running, video of test run available comes from a gastronomic business in which meat loaf was made with it

1 pump, made by Gardner Denver, built in 2019, 2 pump, made by Rietschle, built in 2002, 0.5 mbar (abs.), 300 m³/h, 5,5 kW, on 2 stainless steel frames,

automatically, a closing station in rotation. , Drive: 1.5 kW, Generation of the vacuum by means of a vacuum pump, with closure sorting, with device for TO 53, TO 66, TO 82, format parts for glasses with diameter approx: 60, 64, 70, 78, 90 and 102 mm (65ml, 125ml, 275ml and 1,062ml glasses),, Output: up to a maximum of 1,200 glasses per hour.

Vacuum pump Becker T 3.40 DSK; cleaned and tested; 1420 umin.; Suction volume 40m3h.; suction pressure 600 mbar; Compaction pressure 600 mbar. Vacuum pump Becker T 3.40 DSK; cleaned and checked; 1420 umin.; suction volume 40m3h.; suction pressure 600 mbar; Compression pressure 600 mbar.

Stephan UM/SK 60 E Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. Mounted on a stainless steel frame. The bowl is equiped with a double jacket for heating/cooling on the jacket, 2x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, cutting blade, maximum working pressure in the bowl -1/- bar (protected with overpressure valve), maximum temperature in the bowl 95 °C, maximum temperature in the jacket 95 °C, vacuum connection on the bowl, dearation connection on the bowl, infeed connection on the lid with a hopper with a pneumatic valve for adding powders, mounted on the lid a scraper agitator for the wall, electric driven (0,37 kW - n2: 39 rpm), 1 manual tightening clamp, pneumatic outfeed valve for the product, so not needed to tilt the bowl  ...

This cheese dividing machine disposes of a manually rotated turntable. This offers the possibility to cut cheese loaves and rings in segmental portions (wedges) as well as cheese loaves and bars in sticks with freely selectable stick width. Diameter of the rotated turntable: 100 cm. Cutting knife length: 105 cm. The machine is previously used for Gouda cheese loaves, Butterkäse and Tilsiter cheese (1-2 kg loaves). Light screen protection (Sick). Control panel with PLC control. Spare knife available., Type of Machine: Cheese dividing machine, Capacity: up to 40 cuts/min, Max size of the cheese: 100 x 100 x 25 cm, Total dimensions: 260 x 155 x 230 cm

Simon Freres Butter bulk packing without kneading effect or damages to the structure. Automatic filling of butter into carton and cases between 5 to 25 kg. Currently this machine is set for carton boxes of 10 kg butter blocks. Dimensions of the forming head: 120 mm x 90 mm. Extrusion length of the block is adjustable on time. Feeding by a big volume feeding hopper with 2 large diameter augers / screws, all made out of stainless steel. Infeed conveyor and manually position the folded carton box in front of the extruder. Manual close the box and move it forward on the non driven outfeed conveyor. Motor: ± 3 kW - 380 V - 50 Hz. New simple control panel with universal timer for adding the dosing time, emergency stop and main switch. Manual available in French language., Type of Machine: Butter Packing Machine, Capacity: up to 1.500 kg of butter per hour (output), Motor: 3 kW - 380 V - 50 Hz ...

Stephan Combicut TK 850 Mixer / Universal Machine for the production of bakery products, convenience products, vegan spreads and confectionery. Previously used in the chocolate production. Machine frame, bowl with slides, lid and side covers are all made of stainless steel. The bowl is equiped with a single jacket, 3x twin cutting blades, overpressure valve, bowl volume: 870 liter, hydraulic slide gate infeed and a valve connection infeed on the top for main product, at the bottom a hydraulic slide gate discharge for outfeed of the ready product (hydraulic controlled), 3x connections for pneumatic controlled ingredient valves on one side of the bowl (including 2x pneumatic valves) and 1x connection for pneumatic controlled ingredient valve on the other side of the bowl (including 1x pneumatic valve). Single jacketed lid with scraper of the wall (electric driven ± 25 rpm), 3x manual tigh ...

Spare parts for different Stephan UMM/SK - TC/SK Universal machines. The lot of spare parts is existing out of:, - 4x Springs., - Several steam injection nozzles and components., - Temperature indicator., - Knife nut., - Several scraper blades., - Gummies., - 9x Used Stephan 80 knifes., - 2 New Stephan 80 knifes., - 2x Used Stephan 25 or 40 knifes., - 4x Manual clamps for fixing the lid., - Vacuum chamber., - Filler bushings Stephan TC/SK 600., - Part of a pneumatic outfeed valve., - 4x Sieve plates., Type of Machine: Universal machine

Two like-new and partly originally packaged large-format vacuum angle valves Leybold are available. Deflection: 90°, nominal diameter: 800mm, max. operating pressure: 7bar. Documentation available. An on-site inspection is possible.

Vemag HP30E Vacuum Filler  Complete with loader

Vacuum cleaner bags Euronics various. Grades, content of cardboard approx. 60x60x100cm (WxDxH)

Commercial vacuum cleaner SEBO 470 Comfort

Commercial Vacuum Cleaner SEBO Automatic XP 30

Commercial vacuum cleaner SEBO 470 Comfort

Cordless vacuum cleaner SHARK IW3612EUT clean & empty, exhibition piece with charger, without additional accessories

Commercial vacuum cleaner SEBO Felix