vacuum systems used for sale

Screw vacuum pump Running Status: As good as new Performance: 12 months Zubehoer: User manual delivery time: ex stock; ready for use

ZRVL-300 M single-stage oil-lubricated rotary vane vacuum pump 3-phase, 7.5kW 300m3/h The vacuum pump purchased for a project and then not used is available unused/as good as new Overview technical data ZRVL Type: M300E - Pumping speed: 300 [m3/h] - Ultimate pressure: 0.1 [mbar abs] - Final pressure gas ballast 0.7 [mbar abs] - Voltage 50 Hz: 230/400 V - Motor 50 Hz: 7.5 kW - H2O compatibility: 5.7 kg/h - Oil volume: 6.5 l - Weight: 200 kg - Sound pressure level: 70 dB (A) Accessories/equipment for the ZRVL series: Inlet filter with filter cartridge made of polyester or stainless steel Oil level switch Inlet pressure gauge Oil temperature switches or transmitters Oil trace heating for outdoor installations with high steam loads (open-cast mining or construction site operation) Versions for oxygen applications Monitoring system for monitoring the conditi ...

Screw Vacuum Pump - Unused Manufacturer: Alcatel / Adixen Type: A 300 P Motor: 380-460V Status: Used; As Performance: 12 months Suction power: 320 m3/h connection: ISO-K 63 final pressure: approx. 1.2x10-2 mbar (abs.) Including: user manual ; ready for use

; ready for operation

Rotary vane vacuum pump oel circulation lubricated Manufacturer: Busch Type: RC 1000 B Status: Generalueberholt Performance: 12 months Suction plugs: approx. 1000m3/h Final pressure: approx. 20 mbar

; ready for operation

Rotary vane vacuum pump single-stage Status: Generalueberholt Gewawting capacity: 12 months Manufacturer: Leybold Type: Sogevac SV 65 Kat. No.: 10906 Engine: 400V equipment: mineraloile nominal suction glit: 65 m3/h Final pressure: approx. 0.08 mbar (abs.) Zubehoer: operating instructions, oil filling (mineral oil) delivery time: ex works; ready for use

Vacumet High-Tech Waste Management System Demonstration machine as good as new Tank size: 142 litres Volume reduction: 50 - 70 % Body material: powder-coated steel Weight: 198 kg Degree of protection: IP 54 Connected loads: 230 V 50 Hz 1 kW Control: PLC Noise level: 60 db Tested / Safety: EN 60204 - VDE 0113 Dimensions: W: 920 x D: 750 x H: 780 mm kasu - vacumet is a modern machine for disinfecting the exhaust air and reducing waste. Vacuum and the introduction of an odour blocker neutralise unpleasant odours, trap bacteria and viruses and contain bacterial carry-over. Due to the subsequent sealing of the foil bags and flooding of the chamber with atmospheric pressure, a pressure of approx. 8,000 kg/m² acts on the PA/PE garbage bag, thus achieving an enormous volume reduction.

Rotary vane vacuum pump oellubized Manufacturer: Leybold Type: Sogevac SV 300 B Cat No.: 960702 Status: Preliminary performance as goodas nominal power suction power: approx. 280 m3/h end pressure: approx. Gas ballast Special equipment: thermal switches, FKM seals Performance: 12 months Zubehoer: user manual, mineral filling delivery time: from stock; ready for use

Cole Parmer Vacuum Furnace Cole Parmer's vacuum furnaces are designed for drying under carefully controlled conditions – normal atmosphere, vacuum to 30" Hg or inert gas atmosphere. The oven enables drying, vacuum embedding, electroplating and processing of electronic components. Non-corrosive, non-flammable gases such as nitrogen and carbon dioxide can be used in the furnace. All controls and connections (except the power supply) are located on the front in a vertical panel. Manufacturer: Cole Parmer Model: 5053-12 Power: 600 W Voltage: 240 V Dimensions: 510 x 420 x 1200 mm More items - new and used - can be found in our shop! International shipping costs on request!

Rotary vane vacuum pump oil lubricated Manufacturer: DVP Type: LB. 4 Performance: 12 months Status: Generalueberholt Motor: 230V Suction power: 4m3/h End pressure: 2mbar (abs.) = 99.8% vacuum

; ready for operation

; ready for operation

Rotary vane vacuum pump Two-stage oel lubricated Manufacturer: Pfeiffer Type: DUO 250 Cat.-No.: PK D27 602 / K141 Status: Used (functional!) (A general recovery is offered) suction power: approx. 250 m3/h Endduck: > 5x10e-3 mbar Performance: 12 months (in case of general recovery) Including: user manual and oil Delivery time: ex works ; ready for use

Vacuum pump oil Fomblin (Perfluoro Polyether) Model: YL VAC 16/6 Quantity: 1 KG corresponds to approx. 0.5L Delivery time: ex stock Alternative: Model: YL VAC 25/6 Quantity: 1 KG corresponds to approx. 0.5L Delivery time: from stock; ready for use

Balzers BAK 1050 evaporation chamber as seen in the photos. For technical questions, I would like to ask.

TOC 900 kg vacuum lifter was built in 2021 in Poland by Przedsiębiorstwo HAK Sp. z o.o. The device, designed for lifting parts with a flat surface, is an irreplaceable tool in, among others, the handling of industrial machinery. An electricity-powered vacuum generator is located directly on its design, significantly reducing operating costs compared to pneumatically powered pumps. Furthermore, the OC-900 vacuum lifter is extremely versatile and can be mounted on the hook of any lifting device. Technical specifications of the TOC 900 kg vacuum lifter - maximum lifting capacity: 900 kg - maximum lifting area (L x W): 7000 x 2000 mm - minimum lifting area (L x W): 1000 x 500 mm - suction cup diameter: 250 mm - suction cup number: 10 - main beam length: 6000 mm - main beam cross-section: 80×80 mm - crossbeam length: 1200 mm - crossbeam cross-section: 40×40 mm - handle length: ...

The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE ...

Lock valve vacuum pump E250 Status: Generalueberholt Gewaehrleistung: 12 months Manufacturer: Leybold Type: E250 Engine rated power: 5.5KW nominal suction digesters: 290m3/h Final pressure without gasb.: 4x10e-2 Zubehoer: Operating instructions with spare parts list Delivery: short-term

; ready for operation

; ready for operation

Ekato Unimix Vacuum Processing System SRT 50 Order# 4808/2, Series# 70888. Year of manufacture 2004 Description • GMP compliant • EKATO PARAVISC agitator with EKATO UNIMIX scraper system Power 3 Kw, 5.2 Kw at 87 Hz Speed 21-121 rpm • Patented homogenizer EKATO UNIMIX S-JET, located at the lowest point of the container, for internal and external homogenization Power 5.5 kW, 9.5 Kw at 87 Hz Speed 1,000 – 4,800 rpm • Lid lifting device can be swivelled • Integrated CIP cleaning system • Integrated heating/cooling system Electric heating 12 Kw Control Siemens S7 with OP 17 Pressure and vacuum resistant with integrated vacuum system Product space: Capacity 85 litres / 50 l usable volume, Pressure -1/2 bar, Temperature 10/152 °C, Thermal system / double jacket: Capacity 11 l Pressure -1/+4 bar, Temperature 10/152 °C, Complete document ...

Rotary vane vacuum pump /// oel circulation lubricated Manufacturer: Busch Type: RC 0100B End pressure: approx. 20mbar suction power: approx. 100m3/h Status:Generalueberholt If you have any questions about this information or general questions about vacuum generation, we are happy to provide you with your services;

Different width and different bins

Vacuum chamber with control and pump unit. diameter inside: 1000 mm Laenge inside: 1600mm vacuum pump: 1000m3/h Prated leakrate! Different vacuum chambers available as well as different constellations with pumps possible.

Kilia 50 liters bowl cutter, Siemens control, 2 knife speeds, 2 bowl speeds, mixing speeds forwards and reverseard. You are very welcome to test the machine in our facility in Koblenz, Germany.

Leybold pump stand Consisting of: pump 1 Leybold Sogevac SV 300 (optionally with water cooling or air cooling) pump 2 Leybold Ruvac WAU 1001 H The individual pumps or the entire frame can be transferred. A service is 12 months in a general recovery. Several frames, versions available!; ready for use

Rotary vane vacuum pump Manufacturer: Busch Type: R5 RA 302 D Voltage: 50/60Hz 400V Nominal suction digesters: 300m3/h End pressure: smaller 0.5hpa(mbar) Status: Generalueberholt Gewaehrleistung- 12 months Including: engine re-storage, repainting, electric check delivery time: from stock; ready for use

; ready for operation

5x vacuum tube lifter with column slewing crane 4m boom, 4m high, 80kg load capacity - used - : Price per piece, from location: 12.500.-€ (net), dismantled, packed and loaded! Manufacturer: Timmer Type: S5/SON Type: lightLIFT 50 kg Art.Nr.: S5-4000/SÄ4000/43-80SO Year of construction: 2023, rarely used Short description of the application Handling of cardboard boxes with a maximum of 40kg For Spax cardboard boxes Tube lifter lightLIFT 50 kg UST-LL-HE-140/50-2,5-FH lightLIFT lifting unit with fixed handle Handle length: 300 mm Lifting capacity: 50 kg Lifting hose: 140 mm Lifting hose length: 2,500 mm Electrical vacuum blower module medium inkt. Motor protection switches, engine protection and vibration dampers Weight: approx. 54 kg Vacuum Suction Hose Material: PVC Ø: 38 mm, length 15 m Colour: black for vacuum generators: SMALL, MEDIUM, LARGE and vacuum pu ...

Rotary vane vacuum pump oil lubricated Manufacturer: Leybold Type: Trivac D 30 A & S 30 A Voltage: 400V / 50Hz suction power: approx. 30 m3/h end pressure: approx. 5x10e-3 mbar & 5x10e-2 Status: Generalueberholt Performance: 12 months Zubehoer: User manual mineraloel filling Quantity: several available delivery time. ready for use

Rotary vane vacuum pump manufacturer: Pfeiffer Type: BA251 Status: Generalueberholt Gewaehrl: 12 months Zubehoer: User manual equipment: mineral oil or by arrangement suction power: 250 m3/h end pressure with gasb.: approx.: <5x10e-1 hPa (mbar) delivery time: approx. 1-3 weeks and more Delivery: ex works; ready for use

Rotary vane vacuum pump running Manufacturer: Becker Type: KVT 3.140 Motor: 400V/50Hz suction power: 140m3/h end pressure: 100mbar (abs.) corresponds 90% vacuum Status: Generalueberholt Zubehoer: Vacuum filter mounted; User manual Further details or technical advice via request; ready for use

Waelzpistonblowese Booster Manufacturer: Leybold Typ: RUVAC RA 7001 Status: Generalueberholt Including: repainting, engine restocking, electric check Performance: 12 months Delivery time: from stock; ready for use

Rotary vane vacuum pump oel circulation lubricated Manufacturer: Edwards Type: E2M40 Status: Generalueberholt Performance: 12 months Zubehoer: User manual operating equipment: mineraloil suction power: approx. 40m3/h final pressure with gasb.: approx.<6x10e-2 hPa (mbar) delivery time. approx. 2-3Wo. (intermediate sale reserved) Delivery: ex works; ready for use

Exhibition machine MOVE - the high-precision vacuum press with a gigantic usable surface for vacuum form gluing and vacuum veneering of bent workpieces. With total flexibility, due to total mobility and revolutionary folding mechanism, to reduce the footprint to 45% when folded. High-precision vacuum press with flap opening incl. ⦁ Revolutionary folding mechanism (reduction of the footprint to 45%) ⦁ 40 m³ high-performance vacuum pump (up to 900 mbar (9 t/m²)) optional, automatic shutdown when pressure is reached (with large vacuum volume) ⦁ Pressure regulation 400 to 900 mbar, analog vacuum pressure display ⦁ Highly elastic natural rubber membrane (up to +130 °C) ⦁ Diaphragm quick-change system ⦁ Stable phenolic resin worktop (up to +160 °C) ⦁ Gas pressure damper for flap opening ⦁ Vacuum pressure display ⦁ Connection for external vacuum bag ⦁ Smo ...

Vacuum pump, 025-138, 20mbar, Busch, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. 36 kg, 550 x 270 x 270 mm Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian l ...

Locking valve vacuum pump DK200 Status: Generalueberholt Gewaehrleistung: 12 months Manufacturer: Leybold Type: DK200 Engine rated power: 5.5KW nominal suction digesters: 200m3/h Final pressure without gasb.: small 5x10e-3 Zubehoer: Operating instructions with spare parts list

; ready for operation

Vacuum pump, 025-138, 20mbar, Busch, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was bought from a spare parts warehouse and is in very good condition. 36 kg, 550 x 270 x 270 mm Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian l ...

Rotary vane vacuum pump oellubene Manufacturer: Edwards Type: E2M28, E2M18 Inclusive: oil filling Status: Advance Performance: 12 months delivery time: by arrangement; ready for use

Helium leak detector Manufacturer: Pfeiffer Type: HLT 260 Condition: Tested and ready for use Connection: 230V Delivery time: from stock (e.g.V.); ready for use

Rotary vane vacuum pump - 2 stages - oil lubricated Manufacturer: Leybold Type: Trivac D 40 B /BCS Cat.-No.: 11286 Status: Generalueberholt Suction power: approx. 40 m3/h Endduck: approx. 5x10e-3 mbar Performance: 12 months Inclusive: User manual and oil Delivery time: ex works If you need another pump or spare parts, we look forward to hearing your request.; ready for use

The Lutetia Type 1 sous vide churn is aimed at food professionals who require high marinade quality and production performance. Indeed, this model can process up to 400 kg of meat and brine per cycle, making it a perfect solution for medium-sized workshops. In addition, the 950 liter tank volume ensures a comfortable margin for vacuum marinating operations, while ensuring repeatability of results and consistency of processing. Thanks to its compact design (2150 × 1230 × 1730 mm) and a weight of approx. 800 kg, this churn easily fits into an existing production line. In addition, vacuum technology improves brine absorption, enhancing the texture, taste and added value of the finished product. For example, the internal components and robust workmanship ensure a longer service life, while the quick integration and simplified maintenance reduce production downtime. In addition, the L ...

The Lutetia T2 churn is a benchmark machine in the field of vacuum mixing. Designed to meet the needs of meat and food processing plants, it offers a capacity perfectly suited to medium-sized productions. This ensures an ideal balance between performance and space. Thanks to its homogeneous mixing system, the T2 Churn optimizes marination and improves the texture of the products. This is because the vacuum process promotes uniform brine penetration and reduces yield losses. In addition, it preserves the quality of the meat by limiting oxidation and improving preservation. This efficiency makes it an essential tool for manufacturers wishing to produce with regularity and consistency. In addition, its robustness and stainless steel design ensure optimal durability. Food contact surfaces meet the highest hygiene standards, simplifying cleaning and maintenance. In addition, its footpri ...

Control electronics for turbomolecular pumps (Turbotronik) (e.g. for Turbovac 361) Manufacturer: Leybold Type : NT 20 Status: over-prun & functional Delivery time: ex stock (intermediate sale reserved; ready for use

Rotary vane vacuum compressor - running dry Manufacturer: Becker Type: DVT 3.60 & DVT 3.80 Motor: 400V Status: Generalueberholt and Neu-painted Gewaehrleistung: 12 months; ready for use

Rotary vane vacuum pump oel lubricated Manufacturer: Edwards Type: RV 12, RV 3, RV 5, RV 8 Motor: 230V Including: oil filling Status: Advance performance Performance: 12 months Delivery time: ready for use; ready for use

The Lutetia T4 vacuum churn is an essential tool for meat processing companies looking to optimize the quality and efficiency of their processes. Thanks to its high-performance vacuum system, this churn ensures homogeneous absorption of liquids, which improves the texture and flavor of the finished products. In fact, it allows you to marinate large quantities of meat efficiently, guaranteeing consistent and high-quality results. In addition, the Lutetia Type 4 Churn stands out for its robustness and ability to meet the demands of intensive production environments. With a high mixing capacity, it is perfectly suited for large productions, while ensuring a smooth and fast work process. In addition, it can be easily integrated into different production lines, offering great flexibility in terms of managing the volumes and types of meat processed. In short, the Lutetia Type 4 Churn is  ...

The Lutetia Type 5 vacuum churn is a must-have tool for food industry professionals looking to improve the quality and efficiency of their processing processes. Designed for processing large quantities of meat, this churn optimizes marinating and seasoning with its vacuum operation, ensuring even absorption of liquids and spices. This machine is equipped with a timer with variable speed drive, which allows each cycle to be customized according to specific production needs. As a result, it delivers consistent results while optimizing processing time. Thanks to its large capacity of 3800 to 4000 kg of meat and brine, the Lutetia T5 is particularly suitable for intensive production environments. Its robust, stainless steel design ensures exceptional durability and maximum hygiene, essential in food processing processes. In addition, its variable speed control allows precise control of th ...