vacuum rotary used for sale

table diameter:200 mm groove width:12 mm weight of the machine ca.:25 kg dimensions of the machine ca.:350 x 300 x 170 mm

Capacity: 5.9/5.6 m3/min, pressure: 1.5/1.7 bar, Connections: 110 mm tube

The machine is in good technical condition, it is possible to inspect it in operation by agreement. Circulating diameter: 320 mm Distance between spikes: 1000 mm Max. workpiece weight: 300 kg Power of the main electric motor: 9.5 kW Dimensions L x W x H: 4890 x 2320 x 1720 mm Machine weight: 5100 kg.

Length: 8225mm, width: 3200mm, with documentation.

There are 10 identical SIHN ring piece rotary transfer machines available. Parts: Rotary indexing table, clamping device, clamping cylinder, vertical and horizontal drilling units, feed unit, vibration conveyor, hydraulic unit, housing, control system, various pneumatic assemblies. Power: 25kW-38kW, working pressure: approx. 6bar, weight: approx. 4500kg-6500kg. The rotary transfer machines are only sold as a package. Individual machines cannot be sold separately.

Max. workpiece diameter: 42mm, connected load: 132kVA, length: 4600mm, width: 7500mm, height: 3000mm, with bar loader.

Generator power: 10kW, with documentation.

Suitable für syrup, connected load: 20kW, controls panel: Siemens SIMATIC HMI, length: 3000mm, width: 2500mm, height: 2500mm, weight: 6.5t, with capper and full documentation.

With rotary arm and control cabinet.

Turning circle diameter: 2950mm, rotary arm speed: 10/min, rotary arm drive: 0.75kW, film slide drive: 0.37kW, IP 54, connected load: 1.5kW, without accessories or spare parts, was maintained regularly.

Bosch stainless steel dosing pumps, 12 mm (21 pcs. available)

Bosch stainless steel rotary piston pumps, , Ø 30 mm, short version (12 available)

Inlet hopper Diameter: 150mm, speed: 23/min, pipe diameter: 85mm, power: 2.2kW, was used for food.

Number of color units: 8, max. material width: 900mm, max. printing width: 850mm, speed: 200m/min.

Machine was overhauled and is fully functional, with documentation.

Speed: J, weight: 300kg.

Was used for assembling pens, controls: SIEMENS S7-1200, length: 2000mm, width: 2000mm, height: 2000mm, weight: 1t, including conveyor, extraction robot and documentation.

Max. load: 2.5t, connected load: 4kW, weight: 1.477t.

Salmson centrifugal pumps used Techn.Data see pictures

Number of drill units 7 Number of tapping units 4 Number of clamps 8

pneumatic rotary drive AMG SAD030 Up to a maximum of 10bar compressed air. At 6 bar 302 Nm. Drive 90° rotating, double-acting. Hpnrf22 Unused from remaining stock complete with 5/2 way solenoid valve from Norgreen 230 V 50/60 Hz, 5 VA, with adjustable throttle for setting time of 1- approx. 25 sec. Limit switch box set up with 2 mechanical switches for ON / CLOSE. See photos. Connection to valve F10, with vk 17 or 22.

Memory rotary table, used rotary storage table Manufacturer: RÖSLER Oberflächentechnik GmbH Type: R 1540 ST Table diameter approx. 1500 mm Built: 2003 Total dimensions: approx. 2600 x 2100 x 1000 mm Memory rotary tables are used for storing, buffering, separation and single feeding of rotational symmetrical parts. They are often enrolled in sliding grinding systems. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Pneumatic rotary drive, DSO-P 50/ 370-BN-P-H-E, Drumag, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. If you have a UID number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging. Radial force 1200 N Axial force 1500 N Max operating pressure 10 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 6 months of purchase, you can return the goods and w ...

Recording VDI 40 for rotary chisel - for longitudinal turning - 8 pieces - for flat turning, piercing - 1 piece

Recording VDI30 for drill rod - 4 pieces Recording VDI30 for rotary chisel - for longitudinal turning - 1 piece - for flat turning, piercing - 1 piece

Max. diameter 240 - 2000 Max. plate thickness 10 mm Main motor power 5,5 HP

Rotary kiln, gas oven, pyrolysis oven, thermolyse furnace used Manufacture: REIDHAMMER Type: DRA 10/150-G-650; DRA 8/100-G-650 Built in 2015 Temperature max 650° C Natural gas Furnace chamber approx. 8 x 2 x 2.2 m Filling volume 1.77; 0.63 m3 Dimensions total approx.: 17 x 2 x 3 m

Manufacturer Düchting Type centrifugal pump LHK 125x5 Unused / Refurbished Flow rate 180 m3/h Head 150m Step number 5 Weight approx. 550kg Special price

Rotary filtre,stainless steel,Fratelli Gianazza type 15020,5,6 m²

rotary table diameter: 1000 mm grinding height: 500 mm grinding head - power requirement: 15/5,5 kW total power requirement: 30 kW weight of the machine ca.: 18 t dimensions of the machine ca.: m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _______________________________________________________ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx.  ...

workpiece diameter: 600 mm workpiece weight: 400 kg workpiece height: 300 mm total power requirement: 35 kW weight of the machine ca.: 4500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 590 mm table width: 590 mm table load: 200 Kg table turning speeds: 0,23 - 2,3 U/min table height: 650 mm total power requirement: 0,55 kW weight of the machine ca.: 600 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 960 mm table load: 3,5 t swivelling range: 0 - 110° deg. table rotating: 360° deg. table turning speeds: 0,1 - 0,9 U/min height adjustment: 1070 - 1800 mm table drive: 1,5 kW hydraulic motor: 1,5 kW total power requirement: kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,35 x 1,35 x 1,80 m Hydraulic Welding Positioner - Adjustable rotating speed - Remote controller with 5 meter cable length - Digital speed indicator on the controller panel for monitoring rotation - Mechanical angle indicator (for tilting) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: mm stations: 10 axis stroke (X,Y,Z): 250 / 400 / 400 mm control: Siemens 840D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Rotary cycle machining center for machining serial parts. 10 stations 31 NC axes Control: Siemens 840D Maximum productivity through parallel work processes on up to 9 stations Loading and unloading can be automated in parallel to the main time Travels X / Y / Z: 250/400 / 400mm 10 planet carriers rotatable 360 ° for clamping devices, incl. Media feed-through for hydraulics and pneumatics 5 stations equipped with 6-fold revolver make Sauter Machine hours as of December 20, 2020 Operating hours 15,024 h Production hours 8,115 h Manufacturing costs: € 1,200,000 The application on customer workpieces can be offered. The data for this ad was created with ModulMWS - the software solution of Log ...

table diameter: 800 mm table load: 0,6 t table height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Circular Indexing Table dia 800 mm, motorized rotating, swivable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 500 mm table load: x t table height: x mm spindle diameter: 0 mm x-travel: 500 mm y-travel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mm table width: 1000 mm table load: 1,5 t flange diameter: 700 mm turning speed: max. 0,04 U/min weight of the machine ca.: 1,2 t dimensions of machine L x W x H: 1,60 x 2,0 x 1,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 450 mm table load: waagerecht 300 Kg table load: senkrecht 150 Kg table turning speeds: 0,2- 2 U/min voltage: 230 V / 50 Hz total power requirement: 0,55 kW weight of the machine ca.: 80 KG dimensions of the machine ca.: 0,65 x 0,5 x 1,0 m • unused stock machine • manual tilt adjustment • Start-Stop by foot switch • with CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1525 mm table load: 5,0 t swivelling range: 135° deg. table rotating: 360° deg. table turning speeds: 0,05 - 1 U/min height adjustment: mm table drive: 1,5 kW total power requirement: kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 1,80 x 1,54 x 1,20 m Adjustable rotating speed Remote controller with 5 meter cable length Digital speed indicator on the controller panel for monitoring rotation Welding – chassis mechanism Mechanical angle indicator (for tilting movement) Motors with brake & forced fan cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mm table load: 5 t swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min : 10000 Nm 0: 1,5 / 1,5 kW welding current: 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 780 mm table load: 1,0 t swivelling range: 0 - 135 Grad turning speeds: 0,15 - 1,5 U/min table height adjustment: von 780 bis 1560 mm max. torque on the faceplate: 1000 Nm welding current: 500 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 900 mm table load: 1,0 t swivelling range: 135 Grad turning speeds: 0,12 - 1,2 U/min : 820 mm welding current: 500 Ampere total power requirement: 0,75 + 0,55 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,5 x 1,0 x 0,9 m • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1200 mm table load: 1,2 t swivelling range: 0 - 120 Grad turning speeds: 0,06-0,6 U/min max. torque on the faceplate: 2400 Nm table pass: 200 mm welding current: 500 Ampere total power requirement: 0,75 + 1,1 kW weight of the machine ca.: 1,0 t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1000 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,1 - 1,25 U/min max. torque on the faceplate: 900 Nm table pass: 200 mm welding current: 500 Ampere total power requirement: 0,37 + 0,75 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1000 mm table load: 1200 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min height adjustment: 1000 - 1450 mm max. torque on the faceplate: 2000 Nm engine output: 0,75 / 0,55 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mm table load: 5 t swivelling range: 0 - 135 Grad turning speeds: 0,05- 0,5 U/min table height adjustment: von 1100 bis 1950 mm max. torque on the faceplate: 7000 Nm welding current: 700 Ampere including remote control and welding current transmission. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 560 mm table load: 0,3 t swivelling range: 0 - 90 Grad turning speeds: 0,25 - 4,0 U/min : 360 Nm welding current: 500 Ampere total power requirement: 0,4 / Hand kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mm table load: 5000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min height adjustment: 1300 - 2050 mm max. torque on the faceplate: 10000 Nm engine output: 1,5 / 1,5 kW welding current: 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mm table load: 2,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 6000 Nm table pass: 200 mm welding current: 700 Ampere total power requirement: 1,1 + 2,2 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.