135,505 used machines on RESALE, but how to find them? Machine Search
Year of construction 2013 3 kW Container volume 0.5 sqm, load capacity 1000 kg Weight 230 kg Original price approx. 10000,- EUR Very good condition, little used
1 shaft with direct gear drive; Feeding spiral is driven by gearbox; Mouthpieces and spare parts are provided separately on pallet; Control cabinet with control (in need of renewal) is included; Length 3.70 m, width 1.10 m, height without hopper 1.35 m, hopper height 0.50 m, inlet opening 35 x 35 cm Current type: 3-phase AC; Operating voltage 380 V; connected load 2.5 kW, motor type KMR 160 M8; Engine power 11 kW; Engine speed 720 rpm. The plant was shut down in 2024. more photos on request
An electric plate vacuum lifting frame Framatech with tilting function is available, load capacity: 2000kg, suction frame dimensions X/Y: approx. 1200mm/2400mm, suction pads: 16, suction pad diameter: 290mm, dead weight: approx. 400kg, documentation available, an on site inspection is possible.
Tumbler Henneken -Capacity: 2000L -Dimensions: 2400 x 1500 x 2100 mm -Busch vacuum pump -Made of stainless steel -Condition: Used in very good condition, overhauled, ready to work
Tumbler Lutetia -Type: 1 -Power: 4 kW -Capacity: 950 L -With documentation -Weight: 800 kg -Working capacity: approx. 400 kg -Power supply: 400V 50Hz 3Ph -Made of stainless steel -Drum diameter: 970 mm -Dimensions: 2180 x 1200 x 1820 mm -Condition: Used in very good condition, overhauled, ready to work
Table cutter Talsa K 15, NEW MACHINE, approx. 15 litres bowl capacity, Touch screen 10 inches, infinitely variable knife speed 750 - 3500 rpm, Stainless steel construction, solid cast stainless steel bowl, with removable 3-piece cutter head as standard, (optionally also available with a 6 mm cutter head) programmable, automatic stop according to time and/or temperature, Quality knife of BE machine knife, transparent noise protection cover in accordance with CE, closed lower case, Digital, electronic sausage meat thermometer, Easy cleaning, el. Connection 230V, 2.25kW
Filling machine Talsa F 25 NEW MACHINE, approx. 25 litres cylinder volume, Solid stainless steel construction, Ground stainless steel cylinder, Hydraulic pistons made of stainless steel, Lid and plunger made of solid stainless steel, Seals for lids and pistons flexible and low-wear, The motor and pump start and stop automatically (via internal contactor and microswitch) as soon as the toggle lever is pressed. Advantages: reduced energy consumption, lower heat and noise, as well as longer service life of the oil and hydraulic components, Piston can be easily removed with robust stainless steel hexagon piston puller wrench (included in delivery), High filling pressure for easy filling even of compact mixtures. No running of the sausage meat flow due to automatic decompression of the plunger. Locking of the toggle lever when lowering the piston. Automatic triggering/shutting off ...
Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners -EX: protected -Manufacturer: Nilfisk, ultra-compact industrial vacuum cleaner with side channel blower -Type: CTS22 H Z22 -Connection: 400 volts -Power: 2.2 kW -Number: 3 devices available -Price per piece -Dimensions: 1100/770 / H1270 mm -Weight: 127 kg / piece
Rex vacuum Filler -Type: RVF 736 -Power: 15 kW -Capacity: 3600 kg/h -Serving speed: up to 800 portions/min -Portion range: 5-9999.9 grams -Operated hours: 29337 -Linking and holding device included -Additional funnels included -With loading -Dimensions: 2100 x 1230 x 1950 mm -Power supply: 400V 50Hz 3Ph -Condition: Used in very good condition, ready to work
Well-maintained 90 litre cutter in stainless steel. Stepless speed, reverse mixing gear,
36 filling valves, working direction: left-right. Machine dimensions: L 3.200 x W 2.500 x H 2.700. Weight: 5.000 kg. filling valves: 36 working direction: left-right weight [kg.]: 5000
Model: HVV 16, 16 filling valves. Overhauled in 2013 filling valves: 16 working direction: right-left (CCW) filling system: vacuum filling
Machine, and good Condition Inspektion in our warehouse
motor defect. 5000 EUR afte repair
Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system, vacuum suction device, vacuum loader, hopper loader -Manufacturer: Plastic Systems, granulate conveyor vacuum suction conveying system -Type: PD2-40 FC1 -Side channel blower: Elmo Rietschle -Individual components: see photos -Quantity: 1 device available -Dimensions: 530/520/H1120 mm -Weight: 56 kg
Vacuum Suction Cups Manufacturer Nilfisk Type GB 726 Year of construction unknown Ready to use good condition Power 1900 W
With BW200 loader and unloader, Bowl: 120 litres, Knife speed: variable speed, max 5250 RPM, Bowl speed: 2 speeds, Mixing speed: 2 reverse speeds, Controls: Command 1000K, Power: 3 x 400V, 50Hz, 87kW, Dimensions: 2200 x 2700 x 1700 mm, Weight: 2000 kg
With possibility to add vacuumpump., Bowl: 44 litres, Capacity: max 30 litres, Knives: 3 speeds on knives, max 3000 RPM, Power: 3 x 400V, 50Hz, 5.5kW, Dimensions: 550 x 800 x 1200 mm, Weight: 150 kg
Command 1000K controls, With lifter and unloader for 200L tote bins, Temperature sensor, Bowl: 200 litres, Knifes: 6 variable speeds, Bowl speed: 2 speeds, Mixing: 2 reverse mixing speeds, Power: 3 x 400V, 50Hz, 108kW, Dimensions: 2500 x 3000 x 1800 mm, Weight: 2900 kg
With unloader, water dosing and tempurate indicator, Bowl: 2 speeds, Knives: variable speeds, Steam: 1.5 Bar, 55 kg/h, Vacuumpump: Elmo 2BV2071, 125 m³/h, Power: 3 x 400V, 50Hz, 50kW, Dimensions: 1750 x 1950 x 2000 mm, Weight: 1700 kg
HANDTMANN VF-620/VF-628/VF-630
With double lifter for 200L tote bins and unloader, Bowl capacity: 750 litres, Knife speed: variable, 60 - 3300 RPM, Mixing speed: 150 RPM, Bowl speed: 4, 7, 10, 14 RPM, Power: 3 x 380V, 50Hz, 273kW, Compressed air: 6 - 10 Bar, Water: 2 - 6 Bar, Dimensions: 4330 x 3700 x 3050 mm (open lid), Weight: 7900 kg
Including Alpha Machine Vision Solution lid inspection system, Including tool trolley, Capacity: 18000 - 22000 cups/hr, Cups: round Ø 55 mm, round Ø 65 mm, Seal: aluminium, Compressed air: 6 Bar, 800 l/min., Water: 3 Bar, 1.5 l/min., Power: 3 x 400V, 50Hz, 15kW, Dimensions: 4250 x 2000 x 1800 mm, Weight: 3500 kg
Including unloader and BW200 loading device, With water counter, Bowl: 325 litres, 2 speeds, Knife speed: 6 steplessly programmable speeds, Mixing: 2 reverse mixing speeds, Controls: Auto-Command 1500K, Vacuum pump: Elmo Rietschle L-BV5, 200 m3/h, Compressed air: 6 - 10 Bar, Water: 4 - 6 Bar, Power: 3 x 400V, 50Hz, 157kW, Dimensions: 2600 x 3650 x 1700 mm, Weight: 4300 kg
Filling, portioning and linking, Including 859 linker and DHV937 casing holder, Only 52 running hours!, Pump capacity: max 2300 kg/hr, Hopper: 105 litre, Vacuum pump: Busch 16 m³/h, Power: 3 x 400V, 50Hz, 5kW, Dimensions: 900 x 1200 x 1950 mm, Weight: 425 kg
Fully reconditioned Stephan universal machine for producing processed cheese, convenience products, vegan spreads and confectionery. Formerly used in melted and cream cheese production (also vegan). Machine bowl with top slide and a bottom valve. Framework, lid and side covers are all made of stainless steel. The bowl is equipped with a single jacket including all valves, 4x direct steam nozzles for direct injection of (culinary) steam into the product, temperature sensor in the product, 3x double cutting knives, max. working pressure in the bowl -1 / 0.3 bar (protected with pressure relief valve), maximum temperature in the bowl 95 °C, bowl volume: 300 liters, 1x hydraulic inlet slider at the top for the main product, including large funnel, 1x outlet valve at the bottom for the outlet of the finished product, 1x connection for pneumatics controlled ingredient valves on the side of the ...
Mixer: double shaft paddle mixer, Capacity: 2000 liter, up to 1000 kg, Speeds: 15 / 30 RPM, Infeed height: 2200 mm, Outfeed height: 800 mm, Vacuumpump: liquid ring SIHI LEMB 161, Water: 800 liter/hr, Air pressure: 6 Bar, Power: 3 x 400V, 50Hz, 13kW, Dimensions: 2800 x 2300 x 2400 mm, Weight: 2500 kg
Line is consisting of:, Henkelman double chamber vacuum machine, Type: Titaan 2-90, Serial number: HTN10220019, Year of construction: 2023, Chamber: 840 x 890 x 220 mm, Seal bar: 2 x 840 mm, Cycle: 30 - 50 sec, Vacuum pump: Busch 300 m³/hr, Compressed air: 6 Bar, 100 Nl/min, Power: 3 x 400V, 50Hz, 5.5kW, Dimensions: 2450 x 1100 x 1150 mm, Weight: 850 kg, Automatic lid and outfeed conveyors, Hellings conveyor, Type: 12980-10, Serial number: 790311, Year of construction: 2021, Belt width: 600 mm, Length: 3000 mm, Henkelman diptank, Type: 200A, Serial number: H0D20220008, Year of construction: 2022, Heating: electric, Usable space: 575 x 1100 mm, Immersion depth: 200 mm, Cycle time: 22 sec, Compressed air: 6 Bar, 50 l/min, Power: 3 x 400V, 50Hz, 23kW, Dimensions: 1200 x 2500 x 1350 mm, Weight: 310 kg
Line is consisting of:, Handtmann portioning device for ground meat, Type: GMD99-2, Serial number: 1189, Year of construction: 2005, Air pressure: 7 Bar, Tramper denester, Type: D-3100, Serial number: 002, Year of construction: 2011, Capacity: 20 - 30 cycles/min., Dye: 5x R24, 3x R15, Air pressure: 6 Bar, Dimensions: 3250 x 2200 x 2000 mm, Weight: 310 kg, Tramper tray filling system, Type: TAS01, Serial number: 001, Year of construction: 2011, Dimensions: 5200 x 850 x 1600 mm, Weight: 900 kg, Tramper traysealer, Type: S-460, Serial number: 001, Year of construction: 2012, Trays: R15 & R24, Capacity: max 15 cycli/min., Air pressure: 6 Bar, Dimensions: 3100 x 1450 x 2150 mm, Including 2 tool trolleys, For vacuum and gas flush, Including Witt gas mixing station
Including trim removal unit, Capacity: up to 3 cycles/min, Product length: max 750 mm, Belt width: 800 mm, Seal bar: 1350 mm, Vacuum pump: Busch Panda WV1500B roots, Compressed air: 6 Bar, 250 Nl/min, Power: 3 x 400V, 50Hz, 4kW, Dimensions: 3750 x 1500 x 2200 mm, Weight: 2200 kg
A Vemag portioning and vacuum filling machine is available. 1) Vemag Robot 500 filling machine, year of manufacture: 2021, programs: 500, max. portioning speed: 450/min, portioning range: 1g-100000g, adjustment increment: 0.1g, max. conveying capacity: approx. 2800kg/h, hopper diameter: 120mm, hopper volume: 230l, max. lifting device load capacity: 250kg, operating hours: approx. 400h. 2) Piab vacuum unit, suction capacity: 21m³/h. 3) Vemag ASV 811 cutting device, year of manufacture: 2021, outlet shape: oval, arrangement: vertical, max. inclination: 20°, filling tube holder: Z design, weight: approx. 50kg. Including special nozzles in teddy shape and oval shape. Documentation vorhanden. An on site inspection is possible.
Equipment: Vacuum,Manufacturer: VAKUMIX,Condition: used,Volume: 1,980,Vacuum: 1,0,Max. permissible Operating temperature : 99,Lower shelf: conical bottom,Top bottom: Top shelf removable / foldable,Design: upright,Stand shape: Frame,Diameter inside: 1.300,Cylindrical height: 1.095,Total height: 2.760,Wall thickness underbody: 8,Wall thickness cylinder: 8,Wall thickness upper floor: 20,Year of construction: 2009,Technical documentation: Drawing,Type plate: Yes,Outlet: Flange,Outlet : 280,Note: slight adhesions,Remarks: Height-adjustable frame made of V2A various connections in the top floor Topsoil leaves
Seydelmann Bowl Cutter -Type: K 126 H AC 8 -Power: 86 kW -Capacity: up to 3000 kg/h -Bowl capacity: 126 liter -Continuous speed control -Maximum knife speed: 5250 rpm/min -Touchscreen control panel -Original electrical cabinet -Knife set included -Working hours: 1800 -Year of manufacture: 2016 -Cutter dimensions: 2650 x 1800 x 2300 mm -Cabinet dimensions: 1650 x 600 x 2150 mm -Made of stainless steel -Condition: Used in very good condition, ready to work
WIRBEL K 855 HP 7,5 Industrial Dry Vacuum Cleaner -CE - Identifier -Mint condition -Motor power 5.5 KW -Filter area 1.2 m2 -Tank volume 60 liters -Air flow rate 135 L/sec -Vacuum (vacuum) approx. 300mbar -Suction hose -Connection cable Dimensions: LxWxH 1.2x0.6x1.3 meters / weight 125 kg
Frey K 120E Filling Machine, Vacuum Filling Machine, with twisting gear, new vacuum lid (the photos are still the old one), Connection 400V, weight approx. 470kg, good used condition, functional
Vacuum Tumbler Vakona Type 125 ESK with Cooling Capacity depending on the product from 10 - 95 kg Busch Vacuum Pump 18 m3/h Dimensions: Width 68 x Length 118 x Height 130 cm Connection: 400 V/50 Hz Power: 0.7 kW Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60
Vacuum cooling tumbler for meat and fish. With self-tipping mixing tank and loading/lifting arm. Manufacturer: RÜHLE Model: MGR 400 Serial no.: 0075 Year: 2012 Power supply: 400 V/50 Hz/32 A/3PH Power consumption: 12 kW Refrigerant: R404A Vacuum: 0 – 95 % Mixing tank volume: 400 litres Max. filling: 300 litres Mixing arm speed: - 25 to + 25 RPM Tumbler speed: 0 to 25 RPM Lifting capacity: max. 400 kg Overall dimensions: 2,200 x 2,340 x 1,950 mm (LxWxH) Net weight: approx. 1,400 kg
The Handtmann VF50 is a smaller sized vacuum portioning machine making it suitable for butchers, pet food producers, small goods producers looking for a reliable and fast way to accurately portioning, straight filling product such as mince& sausage meat, cookie dough as well as being capable of handling a wide range of products. Filling capacity 2,600 kg/h Filling pressure up to 55 bar Portioning and linking capacity: 25 g = 420 port./ min 50 g = 350 port./ min 100 g = 250 port./ min 200 g = 160 port./ min Portioning range: 5 – 100,000 g Hopper Capacity: 80 litres Control system: Digital Monitor Connected load: 4 kW Weight:450kg Dimensions: Width:70 Length: 90 Height: 165
Height=0.29 m, Overall length= 0.44 m, Overall width= 0.34 m, Net weight= 27 kg,
Overview This ALWID Matador-HV linear filling machine was manufactured in 1997 and is designed for filling liquid products into various bottle formats in small to medium production environments. The machine operates with a high-vacuum filling principle, enabling level-controlled filling and ensuring consistent fill heights. The filler is equipped with five filling stations and achieves a capacity of approximately 1,000 bottles per hour at 0.7 L. One advantage of the system is that the filler itself does not require format parts, allowing flexible processing of different bottle sizes. The associated capping system can process both PP screw caps and swing-top closures (grip corks). For this purpose, the machine includes two cap sorting bowls, one for each closure type. Approximately ten format sets are available for the capper, covering round and square bottles from 0.2 L to 1.0 L. With it ...
Overview The filler + capper block was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to process explosive products. The machine can be purchased with warranty. Technical data Fully automatic rotary filler Filling system: mass flow meter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Max. container dimensions: Height: 50-300 mm, Ø: 20-100 mm Pressurized feed tank for constant flow through flow meter Below level filling to avoid foam formation during filling Adjustable bottle neck centering Electr. level measurement CIP capable Designed for riser pipe processing Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting an ...
Used Rotary Drum Vacuum Filter VELO FRP 10 10MQ This Filter efficiently separates solids from liquids for the bottling and filtration industry. Firstly, Velo produced this model in 2002, equipping it with a rotary vacuum filtration system that enhances separation processes. Moreover, the rotating drum continuously filters the material, optimizing processing time and increasing productivity. As a result, this machine adapts to various liquid types, providing versatile applications for industrial needs. Technical Features of the Used Rotary Drum Vacuum Filter VELO FRP 10 10MQ The Filter VELO FRP 10 uses a rotary vacuum drum system, which is ideal for industrial filtration. For example, the drum immerses itself in the liquid, capturing solid particles on its surface while a vacuum pump extracts the liquid. Consequently, this rotary vacuum filter maintains a constant filtration surface, mini ...
Overview This low-pressure vacuum filler was manufactured in 2004 by MBF. The machine was in use until 2017 and was fully functional at the time of shutdown. It was replaced due to the increased demand for carbonated products, which required a different filling principle (counter-pressure). Since then, the machine has been stored dry and protected, with only minor dust present. It is promptly available for sale. Technical data Capacity: 6,000 bph (1.0 l bottles) 7,000 bph (0.75 l bottles) Bottle diameter: 55–120 mm (via steplessly adjustable in/outfeed stars) Bottle height: 150–370 mm Number of filling valves: 36 Filling principle: Low-pressure vacuum filling Running direction: Left to right Filling valve type: Electropneumatic Special features: Programmable bottle parameters with automatic adjustment for bottle height and fill level Hot filling capable with auto shutdown at temp ...
Overview The ALWID-KRONE-HV is a semi-automatic filling machine working with high vacuum. This model is suitable for filling still media into dimensionally stable containers. Many bottle shapes and sizes can be used, no format parts required. The filling level is set directly on the valve, so it remains constant regardless of the bottle volume. Vacuum level adjustable. Technical data Filling points: 2 Filling valve diameter: mm Suitable for filling highly viscous media Fields of application: food, beverage, pharmaceutical and chemical industry
maximum number of results exceeded
please refine your search
