136,416 used machines on RESALE, but how to find them? Machine Search
Unused; Steam cleaner; wet and dry vacuum cleaner; 2100W; tank capacity 30L; 230V; 8528 Auction-ID: A1-50534-522
high-performance, heavy-duty suction unit is designed for tough industrial, factory, and machining environments.Metal Swarf & Chip Extraction: Suctioning heavy metal turnings, grinding dust, chips, and swarf directly from CNC machines, lathes, or work areas. Manufacturer: DEBUS GmbH Model: DES 119 Year of Manufacture: 2002 Power Output: 5.5 kW Voltage / Frequency: 400 V / 50 Hz Dimension 138 x 63 x 155 in cm Approximate weight 270 kg. Auction-ID: A7-50717-22
With oil drum and oil collection truck Auction-ID: A1-50608-58
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar workpieces. Manufacturer: AS Metal Model: Transform Year: 2022 Configuration: Sliding worktable, vacuum/pressure vessel, pneumatic control manifold, vacuum pump protection/control, pressure gauges, safety mesh guarding and separate operator control console Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Approximate weight: 6,350 kg All descriptions are indicative only. Auction-ID: A1-50546-18
AS Metal Transform Vacuum Membrane Press Industrial membrane press for vacuum forming and laminating panels and similar components. Manufacturer: AS Metal Model: Transform Year: 2017 Serial number: 1711-017 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum/pressure vessel, pneumatic controls, pressure gauges, heating system and safety mesh guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 5,520 kg All descriptions are indicative only. Auction-ID: A1-50546-19
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar workpieces. Manufacturer: AS Metal Model: Transform Year: 2022 Serial number: 2207-010 Power: 39 kW Electrical supply: 380 V, three-phase, 50 Hz Configuration: Sliding worktable, membrane pressing chamber, vacuum system, pneumatic controls, safety guarding and separate operator console Control system: Schneider Electric Harmony HMI Worktable length: Approx. 2,530 mm Condition: Used Approximate dimensions: 4,500 × 3,000 × 2,800 mm Weight: 6,350 kg All descriptions are indicative only. Auction-ID: A1-50546-16
Chip and sawdust vacuum cleaner (not suitable for fine dust). Mechanically welded steel construction, 180° rotatable suction unit, on wheels. Condition: New, never used, in its original box. Characteristics (plug optimachines.com): • Power supply: 400 V • Air flow: 1900 m³/h • Motor power: 1.1 kW • Inlet diameter: Ø 203 mm • Outlet diameters: 1 x 100, 1 x 120 mm • Filter surface: 1.92 m² • Bag volume: 110 l • Noise level: 85.7 dB(A) • Dimensions (L x W x H): 1000 x 500 x 2100 mm – net weight 39 kg Supplied with: Filter bag, Chip bag. Carton size: 95 x 53 x 54 (cm) Auction-ID: A1-50698-2
Used and unchecked; viewing desired Auction-ID: A1-50737-146
The ESUC supply unit is used exclusively for the operation of surface cleaning devices of Dr. Escherich GmbH.It supplies these cleaning devices with high voltage for the dischargers, compressed air and provides an extraction system with filtering. Only dry dusts can be separated in the filters. Explosive, toxic, biologically active or sticky dusts and vapours must not be extracted. The device is not suitable for use in potentially explosive areas. The ESUC NC supply unit is used to operate non-contact cleaning devices such as TAIFUN-CLEAN and STATIK-AIR. The ESUC RC supply unit is used to operate ROTORCLEAN contact cleaning devices. However, these supply units can also be used for non-contact devices. The ESUC RC version is designed for the operation of max. 2 ROTORCLEAN. Frequency control of the brush speed is possible. incl. ionization module and power supply Taifun-Clean Control C ...
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar components. Manufacturer: AS Metal Model: Transform Year: 2017 Serial number: 1711-018 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum/pressure vessel, pneumatic distribution system, pressure/temperature monitoring, heating system, operator control panel and safety mesh guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 5,520 kg All descriptions are indicative only. Auction-ID: A1-50546-20
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar workpieces. Manufacturer: AS Metal Model: Transform Year: 2022 Serial number: 2207-010 Power: 39 kW Electrical supply: 380 V, three-phase, 50 Hz Configuration: Sliding worktable, vacuum/pressure system, upper pressure vessel, safety guarding and separate operator control console Working table: Approx. 2,500 × 1,600 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,350 kg All descriptions are indicative only. Auction-ID: A1-50546-17
AS Metal Transform Vacuum Membrane Press Industrial membrane press for vacuum forming and laminating foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1808-019 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding worktable, pressure vessel, pneumatic/vacuum system, heated upper pressing section, operator control panel, emergency stops and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-29
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1801-002M Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Hydraulic pressure: Up to 500 bar Configuration: Sliding vacuum worktable, integrated pressure/vacuum vessel, pneumatic valve system, heated upper press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,920 kg All descriptions are indicative only. Auction-ID: A1-50546-23
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating membrane or foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2021 Serial number: 2104-014 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated pressure/vacuum vessel, pneumatic control system, vacuum system, heated press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,385 kg All descriptions are indicative only. Auction-ID: A1-50546-26
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and furniture components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1807-016 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum/pressure vessel, pneumatic system, heated press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-24
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating membrane and foil onto panels and furniture components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1807-017 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum pump/system, pressure vessel, pneumatic controls, heated press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-25
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating decorative films and similar materials onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1808-018 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Industrial sliding worktable, hydraulic/vacuum system, pressure vessel, heated upper pressing section, operator control panel with HMI, emergency stops and safety guarding Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-30
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating membrane or foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2021 Serial number: 2101-01 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding worktable, hydraulic power unit, pneumatic/vacuum controls, pressure vessel, heated upper pressing section, operator control panel and safety guarding Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,380 kg All descriptions are indicative only. Auction-ID: A1-50546-28
Vacuum Membrane Press AS Metal Transform Manufacturer: AS Metal Ağaç Makinaları San. Tic. Ltd. Şti. Model: Transform Machine code: MBPR06 Year: 2018 Serial number: 1801-002 Industrial vacuum membrane press for forming and laminating workpieces. Heavy-duty machine with enclosed pressing chamber, pressure/vacuum vessel, sliding loading table, safety guarding and separate operator control panel. The sliding worktable/platen is approximately 2,500 mm long. Power: 45 kW Electrical supply: 380 V, 3-phase, 50 Hz Required compressed air pressure: 6–7 bar Hydraulic system: Oil-operated Hot-oil system: Transfer oil Approx. dimensions (L × W × H): 4,500 × 3,000 × 2,800 mm Weight: 6,370 kg Condition: Used. All descriptions, technical specifications, dimensions and other information are indicative only. Auction-ID: A1-50546-21
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for thermoforming and laminating membrane or foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2021 Serial number: 2102-004 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated pressure/vacuum vessel, pneumatic controls, vacuum system, heated pressing section, operator control panel and perimeter safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,380 kg All descriptions are indicative only. Auction-ID: A1-50546-27
slurry tanker RECORD V950, manufactured in Belgium by Gebr. Claeys in Zn in Maldegem, year 1989. A robust agricultural tank, equipped for pumping, transporting and spreading slurry operations. This tanker rests on a double-axle tandem chassis and has an imposing galvanized metal tank. It is equipped with a pumping system with a PTO-driven vacuum pump. The cardan shaft is present. The kit also includes a suction arm/hose, several hoses, fittings and valves as well as a pressure gauge for controlling the system. At the rear are the filling/emptying equipment as well as the device for spreading. Features and equipment: Brand: RECORD Type: V950 Year: 1989 Chassis No.: 07136 Made in Belgium Galvanized tank Double tandem axle Vacuum pump PTO drive Gimbal present Suction arm/hose Pressure gauge Valves and fittings Large rear hatch Spreading device Side walkways Leaf sus ...
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1801-002 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum/pressure vessel, pneumatic system, heated upper press section, operator control panel and safety mesh guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,370 kg All descriptions are indicative only. Auction-ID: A1-50546-22
DINO 5: An autonomous earthwork machine: Breaking up – Vacuuming – Transporting. The substructure is always a tridem MAN truck type 35.540 TGS 8x4-4BL. The superstructure is from MTS. The three trucks are equipped with most existing options. These are explained in detail below. One truck also has an extra option that allows stones and soil, which are sucked up together, to be collected separately in two different containers. One container contains the coarse fraction, against which the fine fraction is collected separately in a second container. If necessary, this fine fraction can be reused on site. The DINO 5 is equipped with a bi-turbine turbo unit F-48.000 TURBO from MTS. This unit consists of two turbines that can deliver extra power in difficult conditions with their turbo mode. The classic bi-turbine unit F-36,000 from MTS has 36,000 m3/h air volume and 33,000 Pa negative p ...
Semi-automatic WEBOMATIC TL 250 tray sealer/vacuum packaging machine, suitable for sealing and vacuum/MAP packaging of preformed trays. Equipped with touchscreen control, automatic film transport and residual film winding. Maximum tray size approx. 400 x 300 x 120 mm; maximum top film width 350 mm. Capacity up to approx. 7 cycles/min., depending on product, tray and application. Machine made of stainless steel and equipped with WEBOMATIC CleanDesign. Electrical connection 400 V, 3-phase + N/PE, 50 Hz; power consumption 2.0 kW. Suitable for meat, fish, cheese, ready meals and other foods, among others. Auction-ID: A3-46133-12571
German professional equipment designed for intensive packaging! This WEBOMATIC SuperMax-C is a chamber vacuum sealer for professionals looking for a robust solution for packaging and storing products. Particularly suitable for butchers, delicatessens, caterers, restaurants, professional kitchens, processing workshops and food trades, this machine benefits from a solid design with a stainless steel body, ideal for a professional environment. Its large vacuum chamber is equipped with a removable filling plate and protected by a large transparent lid, allowing easy monitoring of the packaging cycle. The Computer System 3000 Sensor control panel offers electronic control directly accessible from the front. The machine is mounted on 4 casters, making it much easier to move and position in a workshop or kitchen. Key features: WEBOMATIC SuperMax-C – type 063-B – machine no. 1810VJ5 ...
Biesse Rover A3.30 CNC woodworking machining centre with Becker vacuum pump CNC woodworking machining centre with adjustable workpiece support beams and vacuum pods. Includes control cabinet with monitor, keyboard and mouse, separate pedestal control panel, foot controls, floor safety mats, safety fencing and machine-connected extraction hoses shown in the photographs. Visible dust accumulation and signs of wear. Included vacuum pump: - Brand: Becker - Type: PICCHIO 2200 - Year: 2007 - Serial number: 2157149 - Speed: 1,420 / 1,720 rpm - Motor power required: 1.8 / 2.5 kW - Inlet capacity: 90 / 108 m³/h - Vacuum: 130 / 130 mbar - Made in Germany Auction-ID: A1-50699-7
CNC woodworking machining centre with six adjustable support beams and vacuum pods. Equipped with operator control cabinet, separate control pedestal, foot controls, extraction hoses, safety fencing and floor safety mats, as pictured. Electrical data shown on the control cabinet nameplate: 400 V AC, three-phase, 50 Hz, 29 A, 17.1 kW. Made in Italy. Becker vacuum pump details: - Type: VTLF 2.250/0-79 - Year: 2013 - Serial number: 2714056 - Frequency: 50 / 60 Hz - Power: 5.5 / 6.4 kW - Speed: 950 / 1150 rpm - Inlet capacity: 244 / 286 m³/h - Maximum vacuum: 200 / 200 mbar Auction-ID: A1-50699-9
Combination lot with Nilfisk industrial vacuum cleaner, floor mixer and AGP slot saw Specifications: 1 x Nilfisk industrial vacuum cleaner Model: VHS120-H / VHS120 Special Serial Number: 3820231900265 Power: 2.00 kW Connection: 230 V Rated current: 8.50 A Frequency: 50/60 Hz Weight: 45 kg Protection class: IP44 Year of manufacture according to type plate: 05-2023 1 x floor processing machine, brand/type according to type plate: LFR-E-4-S Serial Number: FIQ20220074 Connection: 400 V / 50 Hz Equipped with electric motor and mobile chassis 1 x AGP wall saw/slot saw Model: CG150 Power: 2,500 W Connection: 220–240 V / 50–60 Hz Speed: 6,500 min⁻¹ Maximum grinding wheel diameter: 150 mm Axle hole: 22.2 mm / 7/8\" Maximum slot width: 47 mm Maximum cutting depth: 50 mm Features: Nilfisk vacuum cleaner with hose and accessories Mobile Floor Processing M ...
Scrubs, vacuums and dries all dirty surfaces. High cleaning performance of 2,000 m² per hour - 5 hours of continuous use thanks to 2 powerful batteries - 50 liter freshwater and waste water tanks each. Working width: 510 mm - rotating brush - Battery charger unused Auction-ID: A1-40324-53
Complete with swivel arm MENNENS SWL 250kg, 400 x 450cm. Can be dismantled by the customer. Auction-ID: A1-50226-12
Including Macko and Miele, complete with OASIS water dispenser Auction-ID: A1-50226-209
Tool trolley 12 drawers, 293 pcs AND an industrial vacuum cleaner 80 liters. Professional tool trolley, 12 drawers of which 11 filled with 293 pcs tools, Heavy equipment. 600 kg load capacity. Softclose mechanism. 2 swivel wheels and 4 keys. AND an industrial vacuum cleaner wet/dry, 80 liters, 3 motors a 1000w / per motor to be turned on, for wet and dry use. This vacuum cleaner is designed for maximum flexibility. Whether it's fine dust, coarse dirt or liquids: it sucks it all up Auction-ID: A1-40324-71
General Description Vacuum tanker trailer manufactured by ALTRO-TEC GBR , model M-VAC 2000 . Designed for sludge suction, wastewater collection and industrial vacuum applications. The trailer is equipped with a petrol-driven vacuum system, integrated vacuum tank and hose reel for mobile field operation. Technical Details Manufacturer: ALTRO-TEC GBR Model: M-VAC 2000 Machine type: Vacuum tanker / sludge suction trailer Year: 2021 Tank capacity: 2,000 L Maximum operating pressure: 0.5 bar Gross vehicle weight (GVW): 3,500 kg Axles: 2 × 1,750 kg Nose weight: 150 kg Chassis: Knott Engine: Briggs & Stratton CR950, 208 cc Vacuum system: Petrol engine driven Hose reel: Flexbimec Vacuum hose included Condition Used industrial condition. Complete trailer with integrated vacuum tank, petrol-driven vacuum unit, hose reel and vacuum hose. Operational status has not been t ...
Industrial vacuum cleaner 80L wet/dry AND a spot cleaner, powerful steam cleaning. Vacuum cleaner: 3 motors a 1000w / per motor can be turned on, for wet and dry use. Spacious capacity – 80 liter tank. Safe & certified – The vacuum cleaner complies with CE standards, which guarantees safety and reliability. Industrial design – Built for the toughest conditions. Solid wheels, strong housing and easy-to-clean filter system. AND Steam cleaner 1200W: efficiently cleans stubborn dirt stains, e.g. for carpets, stairs, sofas, mattresses, curtains, car, lime and grease. Compact size. 220 V - 50 Hz Rated power: 1200 W Clean water tank capacity: 1600 ml Waste water tank capacity: 900 ml Power cable length: 5 m Hose length: 1.7 m 2 extra brushes Auction-ID: A1-40324-123
Conveyorized chamber vacuum packaging machine for industrial food processing, This VC999 K7B2 is a conveyorized chamber vacuum packaging machine, built by VC999 Verpackungssysteme in Switzerland, with a stainless steel, all-enclosed construction that avoids sharp edges and corners where dirt could collect. The machine runs two to three cycles per minute and features bi-active sealing bars with electronic temperature control and adjustable contact pressure, allowing secure sealing even with greasy or moist products. The B-version adds a perforation blade with bag waste suction on both sides, so trim is removed automatically during the cycle. Evacuation stops at the evaporation point, protecting product quality throughout the process., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/vc999-k ...
Hako Citytrac 4200 DA 4x4 Vacuum Sweeper – 2005 Specifications: Brand: Hako Type: Citytrac 4200 DA Year of construction: 2005 Serial Number: 801002400506 Hours: unknown Engine: Yanmar 4-cylinder diesel Engine type: 4TNV88 Displacement: approx. 2,190 cm³ Engine power: approx. 33 kW / 45 hp Drive: 4x4 / all-wheel drive Steering: articulated steering , Transmission: hydrostatic Own weight: approx. 1,400 kg Maximum permissible mass: approx. 2,500 kg Sweeping width: up to approx. 2,270 mm Base vehicle length: approx. 3,090 mm Base vehicle width: approx. 1,325 mm Cab height: approx. 1,995 mm Wheelbase: approx. 1,430 mm Features: Enclosed driver's cab 2 hydraulically driven frontal side brushes Sweeping and vacuuming system Hydraulically adjustable brushes Stainless steel waste container / collection unit Hydraulic tipping/emptying system 4x4 drive Articulat ...
Three-pump vacuum unit with control cabinet for food processing plants, This used unit consists of three Bora vacuum pumps, type SAP 450, mounted on a single shared frame. Each pump has a filter housing on top and all three are connected to a common manifold. The accompanying control cabinet holds three Omron Hitachi frequency inverters (JX series, 4 kW, 400 V). It also contains a Moeller controller with display and motor protection switches. Three rotary switches are fitted in the door. The frame stands on adjustable feet., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/bora-2/, Type: Vacuum unit with three pumps and control cabinet, Pumps: 3 × Bora SAP 450, on a shared frame with common manifold, Frequency inverters: 3 × Omron Hitachi JX, 4 kW, 400 V, Controller: Moeller controller w ...
unused in box; 4 engines; various accessories; equipped with 2 swivel wheels; 60 liter capacity; 3825 Auction-ID: A1-50865-514
unused; packed in the original box; 3508; Auction-ID: A1-50865-510
80dB low sound; accessories; 19kg; 6440 Auction-ID: A1-50865-1034
On compressed air with 2 sanders from Rupes. Auction-ID: A3-46137-17552
power: 1200 W; Wet/dry piston: yes; socket: yes; connection: 230 V; description: unused; 3508; Auction-ID: A1-50865-4006
unused in box; 4 engines; various accessories; equipped with 2 swivel wheels; 60 liter capacity; 3825 Auction-ID: A1-50865-515
NILFISK GB 733 – Electric Industrial Vacuum Cleaner NILFISK GB 733 electric industrial vacuum cleaner, intended for vacuuming and cleaning operations in professional and industrial environments. Features: Brand: NILFISK Model: GB 733 Type: Electric Industrial Vacuum Cleaner Power: 1,900 W Power supply: 3 x 80 V – 50 Hz Capacity: approx. 150 L Dimensions (L x W x H): 75 x 71 x 128 cm Weight: 87 kg Equipment sold as is. Equipment that may show signs of use related to professional use. Auction-ID: A1-50714-4102
unused in box; equipped with 2 swivel wheels; drain hose; 3 motors can be switched on separately; various attachments; stainless steel reservoir of 80 liters capacity; 3866 ; Auction-ID: A1-50865-518
maximum number of results exceeded
please refine your search
180 € 
