vacuum packing used for sale

HANDTMANN VF 620 Filling, Portioning. Year 2002

10 Meter vacuum tank Leba 225 doorsnede Bs Ud Dswmrhajvycsww

Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 240 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Filling pressure: up to 35 bar Portioning speed: up to 380 portions per minute Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.5 KW Machine dimensions in cm: Width: 210 Lenght: 170 Height: 190

Suction unit: 16, load capacity: 1200kg, crane eyelet: 90mm/160mm, suction pad diameter: 315mm, suction pad type: P200-50, suction pad swivel: 6°, height compensation: 50mm, number of vacuum gauges: 5, vacuum gauge diameter: 100mm, pump capacity: 25m³/h, vacuum pressure: 850mbar. Machine dimensions X/Y/Z: approx. 8500mm/900mm/1500mm, weight: approx. 720kg. Documentation available. On-site inspection possible.

GENERAL INFORMATION: Manufacturer: ULVAC, Inc., Japan Model No.: EWA-165 Type: Vacuum Roll Coater (Vacuum Metallizer) Application: Metallization of plastic films (PET/OPP/PE etc.) by aluminum evaporation Useful web width: up to 1650 mm Film thickness range: 12 μm typical.   POWER SUPPLY: Control / Main Units Power supply:  3Φ, 60 Hz, AC 380 V Rated power consumption (cabinet 1):  290 kVA Rated power consumption (cabinet 2):  160 kVA   VACUUM SYSTEM: Main Pumps Oil Diffusion Pump (Ejector type): Model:  ULVAC PBL-20 Power:  18 kW Fluid charge: 90 L Voltage:  380 V Water cooling requirement:  25 L/min (

Vacuum filler VF 608 Handtmann Stainless steel Power: 3kW Voltage: 400 / 50Hz

Cutter Manufacturer: Kramer Grebe Wetter Bowl made out of stainless steel Dimensions: 290x244x210cm Control voltage: 230V Operating voltage: 400V / 50Hz Power: 74kW

Dimensions (L/W/H): 873x470x336 mm Weight: 111 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3150x4000x1900 mm Weight: 1500 kg Total power requirement: 36 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3500x1600x2000 mm Weight: 1720 kg Total power requirement: 26,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3000x3000x1650 mm Weight: 850 kg Total power requirement: 16 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1174x644x528 mm Weight: 151 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The Lutetia Type 3 churn meets the requirements of workshops looking for a higher level of capacity without sacrificing process precision. Thanks to vacuum mixing, marinades penetrate faster and more evenly, improving texture, limiting oxidation and stabilizing yields. This makes the machine ideal for integration into processing lines where regularity, hygiene and speed are paramount on a daily basis. In addition, its useful volume of 2500 L and its capacity of 1400 to 1500 kg make it possible to absorb large batches, while maintaining a homogeneous mixing. Indeed, the geometry of the bowl, combined with vacuum work, promotes the diffusion of brine and reduces cycle times. In addition, the ergonomics of the heights (loading, shaft and under the mouth) facilitate handling, tank feeding and evacuation, which concretely optimizes the flow on the line. In addition, the stainless steel  ...

Fatosa 120L Cutter The Fatosa 120L Cutter is a great asset for professionals looking for a reliable and efficient solution. Indeed, its spacious bowl allows a homogeneous mixture of various materials, whether meat, vegetables or even more delicate preparations. In addition, its fast-turning knife system preserves the texture and freshness of the ingredients, which fully enhances the quality of your products. Secondly, the stainless steel design ensures optimal hygiene, while facilitating cleaning operations. This saves you time and meets the most demanding health standards. In addition, the intuitive control interface allows precise adjustment of the cutting speeds. In this way, you can adapt the fineness of the chopping according to the characteristics of each recipe without losing efficiency. In addition, the ergonomic design reduces the strain on operators, who can quickly access  ...

The Seydelmann K506 AC8 500 L Cutter is a must-have piece of equipment for companies looking for advanced performance in food processing. Indeed, its large capacity tank facilitates the processing of large volumes, which improves the production rate. In addition, its robust stainless steel design ensures outstanding longevity, even under intensive conditions. In addition, its high-performance blades ensure consistent and precise chopping, preserving the texture and quality of the ingredients. This makes this cutter perfectly suited to the requirements of different applications, ranging from meats to vegetables to delicate preparations. In addition, its user-friendly interface offers significant ease of use, reducing the training time required for operators and contributing to better productivity. In addition, the ease of cleaning and accessibility of its main components minimize do ...

TECHNICAL DATA: 01 MOD. / - 1.7 kW 02 MOD. SV 1080 B 001 KRXX - 2.2 kW 03 MOD. SV 1063 B 003 ZZXX - 2.6 kW 01 MOD. SV 1063 B 001 KQXX - 1.7 kW

MINT CONDITION The robust positive displacement pump of the VT series is designed for continuous operation in the rough vacuum range. Its integrated vacuum regulating valve allows precise adjustment of the operating point. Thanks to self-lubricating sliders, the pump works almost maintenance-free and does not require an oil change. The oil-free operating principle makes them ideal for applications that require a clean environment and need to avoid contamination. In addition, noise-reducing measures ensure a pleasant working environment. Volume flow 50 Hz 25 m³/h Vacuum absolute 50 Hz 150 mbar Power 50 Hz 0.75 kW Sound level 50 Hz 62.0 dB(A) Volume flow 60 Hz 30 m³/h Vacuum absolute 60 Hz 150 mbar Power 60 Hz 0.90 kW Sound level 60 Hz 67.0 dB(A) Weight 26.0 kg with motor

MINT CONDITION Very few operating hours Technical data see Nameplate

MINT CONDITION Very few operating hours Technical data see Nameplate

Vacuum filler bloc Stork/Zalkin 32/8 with 32 filling valves and 8head screw capper running direction: from right to left with frequency inverter with safety housing for 0,2 - 1,0 ltr. bottles

Height=1.35 m, Overall length= 0.84 m, Overall width= 1.57 m, Net weight= 356 kg,

Quiel AAGS Filling Line for Pieces of Meat/Gyros/Gullasch For sale is a filling line from the manufacturer Quiel, model AAGS, specially developed for the processing and filling of pieces of meat Operation of the system: The meat to be processed is filled into the storage container using a lifting and tilting device. There it is continuously moved by the mixing device and then transported to the dosing belts via screw conveyors at the bottom of the container. A squeegee ensures an even distribution of the product on the belts. At the end of the dosing section, the meat falls through discharge chutes into the trays or containers below. The dosing time can be set individually, which allows the portioning to be precisely controlled. If a single portion does not reach the desired amount, the control system allows for a double ejection, in which two portions are filled into the same cont ...

Manufacturer: Meier Vakuumtechnik GmbH Quantity: 2 pieces Model: Vacuum laminator ICOLAM 080 System designation according to the documentation: Vacuum laminator Year of Make: 1997 Conversion: 2002 (controller replacement / connection to control system according to documentation) Feed: 3x400 V/N/PE Supply line: 4 × 25 mm² Control voltage: 24 V DC Degree of protection: IP54 Standard / Regulation: EN 60 204 Location: Schierling (original installation location according to documents: 86919 Utting) Viewing possible by appointment.

Factory liquidation mask production. Installation 2021, out of service since March 2022. The systems have already been dismantled and ready for delivery. Stationary industrial vacuum cleaner Power 2.2 KW Air flow rate 300 m/min Suction port 40/50 mm Weight 30 kg

The T 4.40 DSK is an oil-free combined pressure/vacuum pump for blowing and suction air. It is a robust and durable pump that is designed for continuous operation. This dry-running positive displacement pump works with self-lubricating gate valves made of a graphite composite and requires minimal maintenance. Volume flow 50 Hz 35 m³/h Pressure/vacuum relative 50 Hz ±0.6 bar Power 50 Hz 1.85 kW Sound level 50 Hz 68 dB(A) Volume flow 60 Hz 43 m³/h Pressure/vacuum relative 60 Hz ±0.6 bar Power 60 Hz 2.2 kW Sound level 60 Hz 68 dB(A) Weight 46... 49.5 kg with motor

Vacuum extrusion press 'UNIVERSA' PZG 40-40a with 400 mm Ø and 18.5 kW drive (expandable up to 55 kW). Maximum pressing pressure: 30 bar. Extruder incl. PZSVG 35a pre-press with 15 kW drive. Includes base frame with motor clamping device. In regularly serviced condition; last revision in 2022. Previous use: Production of ceramic roof tiles. Available for an extra charge: vacuum generator and various mouthpieces.

A new oil-lubricated rotary vane vacuum pump Busch in the original packaging is available. Suction capacity: 360m³/h, ultimate pressure: 0.5hPa, motor power: 10kW, speed: 1800rpm, oil fill quantity: 6.5l. Machine dimensions X/Y/Z: approx. 1100mm/600mm/450mm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

Unused Vacuum Pump SHII LEMA51AZ

The pictured cutter is sold by MADO of the type Garant MSK760 H II with a volume of 35 litres. The cutter is made entirely of stainless steel, it has a 6 mm cutter head with an additional spare blade set and comes with an operating manual. The cutter has the following technical data: Bowl volume: 35 litres Number of knives: 6 Speed: 1750-3500 rpm Bowl speed: 12/24 rpm Knife shaft power: 9/11kW Voltage: 400V Fuse: 32A (slow-blow) Dimensions: 1240x890x1130H (1240x1260x1740H with lid open) Footprint: 1040x550mm Weight: 430kg Keys for the cutter head and documentation are part of the machine The machine runs neatly and smoothly, video of the test run available Only the noise protection cover has a crack, but this was professionally glued by the previous owner.

Cutter Capacity: 25 liters Voltage: 380V / 50Hz / 3 phase Power: 1.5kW Speed: 1000-2000 rotating/min Dimensions: 85x67x70cm Packing size: 93x78x71cm With a temperature probe and the net

Used vacuum packaging machine made by Webomatic typ CD 120 . New: 2009. Bush vacuum pump type: RA 0100 F 503. 100 m³/h. 400 V, 3 Ph, 50 Hz, 5.4 A, 2.2 kW. Overall dimensions: 1420 mm x 820 mm x 1010 mm. Sealing length: (2x) 640 mm. Chamber dimensions: (2x) 640 mm x 620 mm.

Oil-Pressure Piston Filling Machine Cylinder Volume: 20 L Stainless Steel Cylinder, Piston, Housing, and Lid Swivel Lid Power Rating: 750 Watts Three-Phase Current 400 Volts, 50 Hz

Height 2700 mm Width 1440 mm Length 2700 mm Electrical Supply: 400V 50Hz 3N Total power 12.5 kW Main Material Stainless Steel, Acid Resistant Agitator Type Spiral Agitators Product ejection Pneumatic flaps, front Product Weighing System No Loading None, possibility to buy additional loading into the bulk mill Stirrer Type Vacuum Stirrer

M. No.: 070068681 Equipment / Additional information: Hz: 50/60 V250/300 m3/h P 100 hPa (0.1 bar)

Vacuum tube lifter with a maximum load capacity of 65 kg for various suction cups; currently equipped with the 'single suction cup long', e.g. for pallets, narrow cartons, beams, square tubes and other elongated workpieces. The scope of delivery includes suction cup, hand control unit (BE65-300/500-BEW+RA), lifting unit (JU-65-E-DUMMI), feed hose, vacuum generator (SBB-SBL-ST-VZ/ABS), main switch and (vertical) crane column (SKJ4-65-VARIABEL).

M. No.: 43954 Equipment / Additional information: Vacuum: 20 mbar Motor Oil: Type SAE 30 Qt.: 6 Ltr.

Handtmann VF 50 incl. turning device and complete accessories

Extended twisting gear for Vemag filling machine Robby or DP, to put a metal detector in between, functional, smooth-running, very good used condition.

Extended twisting gear for Vemag filling machine Robby or DP, to put a metal detector in between, older model, functional, smooth-running

Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar

PVS natural casing welding devices replace the knotting of the sausage ends or the closure of the sausages with a clip The system is suitable for natural casings, sheep casings and pig casings. The advantage to conventional applications is that there is no need to remove knots or clips before packing

Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar

Height 1550 mm Width 2950 mm Length 1750 mm Weight 4100 kg Capacity 200 l Electrical Supply: 400V 50Hz 3N Total power 78 kW Main Material Stainless Steel, Acid Resistant Cutter type Vacuum bowl cutter Construction of the cutter bowl Stainless steel, acid-resistant Number of knives on the head 8 pcs. Vacuum cutter. Additional functions for heating or cooling the bowl

VALOREL Stainless Steel Vessel 620 Ltr. with propeller stirrer, allowed pressure 2,5/-1bar, max. temp 150C , on top there is a inlet 50mm for clamp connection, down outlet valve diameter 2"

1 pump, made by Gardner Denver, built in 2019, 2 pump, made by Rietschle, built in 2002, 0.5 mbar (abs.), 300 m³/h, 5,5 kW, on 2 stainless steel frames,

Dimensions (L/W/H): 2920x980x1450 mm Weight: 1500 kg Total power requirement: 11,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stephan UM/SK 60 E Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. Mounted on a stainless steel frame. The bowl is equiped with a double jacket for heating/cooling on the jacket, 2x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, cutting blade, maximum working pressure in the bowl -1/- bar (protected with overpressure valve), maximum temperature in the bowl 95 °C, maximum temperature in the jacket 95 °C, vacuum connection on the bowl, dearation connection on the bowl, infeed connection on the lid with a hopper with a pneumatic valve for adding powders, mounted on the lid a scraper agitator for the wall, electric driven (0,37 kW - n2: 39 rpm), 1 manual tightening clamp, pneumatic outfeed valve for the product, so not needed to tilt the bowl  ...

Two like-new and partly originally packaged large-format vacuum angle valves Leybold are available. Deflection: 90°, nominal diameter: 800mm, max. operating pressure: 7bar. Documentation available. An on-site inspection is possible.

Vemag HP30E Vacuum Filler  Complete with loader

Kappel DSH2/12V Vacuum Suction Cups Plate Vacuum Cleaner Glass Metal For lifting up to approx. 1500kg!