vacuum packing machine used for sale

KROENERT PACK 600 WITH TPC type KRA 250 water Chiller Coating and Laminating Machine PAK 600 For following operations: Wax Laminate / Coating - one sided 2 - 30 g/m2 Hotmelt Coating at temperature 10 - 40 g/m2 For the following materials: Unclad Aluminiumfoil 9 -150 my Flexible films like PE, PP, PVC, PVDC, PVA, Polyester and Polyamide films. Cellophane and cellulose acetate films Paper and material combinations. Max Mechanical speed V = 100m /min Realisable speed depending on material and application grammage. The Complete drive assembly was overhauled in 2016 for R 1.2 million.

optional with 2 to 10 stainless steel boilers with pliers lock with control cabinet Boiler capacity approx. 190 litres for max. 120kg dough or for a maximum of 75 kg flour with Eaton PLC control Machine is in very good condition

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table

Div. Interchangeable wheels for the gearbox Speed...

used Rheon Free Divider VX 111 from 1998. With a long spout tape and a large funnel. We will be happy to send you further pictures and information on a request for comment. Stainless steel cladding mobile on wheels Flour bestuber digital control 380V - 50Hz - 3.5A Dimensions: Height: 180 cm Width: 445 cm Depth: 105 cm

Sleeve machine Berning Includes steam tunnel Includes heat-resistant modular belt Product diameter: 30–110 mm Sleeve length: 30–370 mm Full body: Max. 300 pieces per minute (depending on sleeve length) Suitable product materials: PP, PS, PET; HDPE Suitable sleeve materials: PET, PVC, OPS with hot melt Year of manufaturing: 2017 Function description: At an interface, the products are transferred from a conveyor belt and fed into the machine system. The incoming products run into the screw system, where they are separated. After separation, the sleeve is applied in the sleeving machine. The sleeve application is fully automatic. When the application is complete, the product is transported to the steam tunnel. In the steam tunnel, the product and sleeve material shrink until the sleeve has adapted to the contours of the product. After shrinking, the products a ...

Type MB506C Working width 600 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Type MB505C Working width 500 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Corner round thruster Foellmer HE/F 31; good condition; cleaned and tested; Table equipment; Knife with radius 7mm. Corner rounding machine Foellmer HE/F31; good condition; cleaned and checked; table top machine; knife 7mm.

Type MB504C Working width 400 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

used 2 row Fortuna head machine mobile maximum hourly output 2400 pieces per srtück.Compact machine robust construction easy cleaning.Payment and delivery on request. Weight range 35-80 grams round buns 2-row Painted on rolls checked and cleaned Dimensions: Height: 170 cm Width: 100 cm Depth: 70 cm

Siemens AXIOM Aristos FX Plus with the following device components: Generator Polydoros LX 30/50 Tube Opti 150/30/50 HC 0.6/1,0_Year of manufacture 2014 (ceiling-hanging) Vertical stand Aristos FX (ceiling-hanging) 1 Detector Trixell Pixium 4600 43x43 cm_Product No. 100204 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the b ...

Length 300 mm Width 40/60 mm Roughness P80/P120/P150/P240/P320 Holder 4,5 mm Length 300 mm Width 40/60 mm Roughness P80/P120/P150/P240/P320 Holder 4,5 mm 40 mm: Price 60 Eur (EXW Jonava, Lithuania) 60 mm: Price 68 Eur (EXW Jonava, Lithuania)

Plate diameter 4200 mm Maximum turning diameter 4600 mm Max workpiece height under the cross member 4000 mm Max workpiece weight 100 t Travel RAM horizontal 2600 mm / min Travel RAM vertical 2000 mm / min Tool holder (powered tools) ISO 50 Table speed 40 rpm Main drive 120 kW Number of gear stages 4 Total connection value 180 kW Max torque on the flat disc 40000 kpm Max cutting force per support 10000 kp Crossbar support right and left Largest vertical path of the Chisel slider 2000 mm Cross-section of the chisel slider 285 x 310 mm Adjustment path of the crossbar 3500 mm Total weight of the machine 115,800 kg Accessories Automatic lubrication of the cross-bar guide on the stand Hydraulic weight compensation of the chisel sliders Milling spindle and C-axis c-axis 360,000 positions

Travel X-axis 19,000 mm Y-axis 3,500 mm Z-axis 1,000 mm W-axis 1,000 mm V-axis 2,500 mm B-axis 360°/ 0.001 Table size 4,000 x 3,500 mm Maximum permissible weight on the table 65 t Spindle diameter 160 mm Mounting cone in spindle 2079 DIN/ ISO 50 Spindle speed 2.5 - 1,000 rpm Spindle motor power 90 kW RAM cross section 400 x 400 mm Automatic tool changer 60 positions Feed in all axes 1 - 6,000 mm/min Rapid response in all axes 10,000 mm/min Automatic indexing 360,000° Plate field 12,750 x 6,000 mm CNC, electrical and mechanical overhaul by Siemens in 2003

Table diameter 2,000 mm Max. Turning diameter 2,150 mm Turning height 1450 mm Table speed 3-140 rpm Max. weight of the workpiece 12000 kg Milling spindle: Maximum speed 2,000 rpm Milling spindle Motor power 22 kW Total weight of the machine approx. 34,000 kg Machine complete with: C-axis: 360,000° Milling spindle 22 KW Tool changer 16 positions Tool changer for milling tools ISO 50 16 positions Complete cladding Conveyor Complete cooling system with filtration

Center height 660 mm Distance between the centers length 12000 mm Turning diameter 1320 mm Turning max. via support 950 mm Clamping max. 1200 Power 55 KW Torque 35000 Nm Bezel I 200-630 mm Workpiece weight 21 to Accessories: Conveyor

Type MB104H Max working width 400 mm Knives 4 Feed speeds 7/14 m/min Min./max. working height 3,5-300 mm Main motor power 4 kW Suction hood diameter 100 mm

Center height 660 mm Center width 11000 mm Turning diameter 1320 mm Turning max. via support 950 mm Power 55 KW Torque 35000 Nm Clamping max. 1200 Workpiece weight 14 to Accessories: Bezel 200-630 mm

Blade length 205 mm Max cutting performance Sheet R = 42 kg / mm2 4 mm Sheet R = 70 kg / mm2 3 mm Engine power 3 kW Number of beats / minutes 50 min Table dimension 625 x 954 mm Capacity of the oil tank 25 l Weight 500 kg The setting between the blades is fully automatic. Standard: - 1 set of knives at 30 ° (mounted on the machine) - 1 stop switch - 1 general circuit breaker - 1 stop adjustable and adjustable every 15° - Fill the first oil - Manual with installation and maintenance instructions and service keys.

Bottle cleaning machine One end Manufacturer: SEN, KHS Type: Riwella VB 12/11-2, Built: 1987, Power: 5700 Fl/h, Bottle size: 55- 92 mm, length 170- 360 mm. Overhauled, with warranty

Continuous/normal drilling power (mm) R1 (gemes. Drehmom. Nm) 30/35 (in E3335/ST60) (135) R2 (gemes. Drehmom. Nm) 27/32 (in E335/ST60) (90) Thread cutting performance max. (slope-dependent) R1 M30x3.5 R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Extension (mm) 300 Column diameter (mm) 140 Usable table area (W x D) (mm) 590 x 450 Speed display digital Drilling depth display digital Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor rotary current 400V with frequency inverter (kW) 4.0 Spindle speeds infinitely variable R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 400 Optional (780 EUR) drilling package 5,beststretched from: Vice [felix] 125 Cone mandrel MK III/B ...

Travel X-axis 9,500 mm Y-axis 4,100 mm Z-axis 950 mm W-axis 900 mm Main spindle speeds (infinitely adjustable): 3.15 - 1000 rpm Spindle motor power 58 kW Feed speed (infinitely adjustable): X-axis 0.1 - 9600 mm/min Y-axis 0.1 - 5600 mm/min Z-axis 0.1 - 5600 mm/min W-axis 0.1 - 5600 mm/min Accessories: Plate field: 6 x 4 m (CNC-controlled B- and V-axis) Table: 2 x 2 m (CNC-controlled B- and V-axis)

NJP-1200C automatic capsule filling machine was built in 2022 in China by Guangdong Rich Packing Machinery Co., Ltd. Machine in very good condition, kept in a temperature and humidity controlled room. All moving parts were systematically lubricated according to the manufacturer’s recommendations. The NJP-1200C capsule filling machine is used in the pharmaceutical industry for mass production of medical products, i.e. drugs, supplements, etc. It enables fully automatic filling of hard capsules of size 00 and 0 with products in the form of powder or small granules. In one working cycle, empty capsules are fed, sorted, filled and sealed. The reliable design made of high-quality stainless steel meets stringent sanitary requirements, as well as maintaining high stability throughout its entire service life. All this makes the offered capsule filler an excellent choice for increasing the e ...

Bread slicer Wabäma Type Piccolo 380.10 HA MB Cutting width 10mm semi-automatic 230 Volt 0.75 kW

Automatic Cutting width 9mm 192 kg 1.1 kW 400 Volt - 50 Hz

Cutting width adjustable from 4-14 mm analog control Sickle knife machine Stainless steel cladding on rolls with traces of usage Voltage 400V / 50Hz

EvoPac VOLTA WINDOWS window and door wrapping machine was built in 2020 in Italy by EvoPac S.r.l. The machine is used for wrapping windows and doors of various dimensions with stretch film. Such protection minimises the risk of damage to the load during transport, as well as protects it from weather conditions. High performance, combined with state-of-the-art technical solutions, makes it a great solution for companies specialising in the manufacture and transport of windows and doors. The process begins with the loading of the product onto a turntable with an integrated roller conveyor. The pneumatic grippers, controlled by a foot switch, automatically adjust to the size of the product, thus ensuring high process stability. The stretch film is unwound simultaneously with the rotation of the work table and the load placed on it. At the end of the cycle, the EvoPac VOLTA WINDOWS automa ...

ALREADY SOLD Hypet 500 for sale We only sell the machine with a mold 144 cavity complete mold 29/25 neck finish preform weight 10.63 grams made by Husky This machine HPP 4.0 and ISS, fast speed. Cycle 6.2 (83612 preforms per hour) 2 Million preforms per day Manufactured 2011 Installed 2012 380v 50hz Excellent condition

Perfectbinding line Acoro A7, 16 Station gathering machine type 1571, machine number NN31846/FE1193085, Tensioning element with hand feeding unit, Asir 3, 2 Vacuum pumps, Inhouse blowair, Spiral raceway type 3635 machine number MMFE1237011/75, MM3643, criscross delivery, intermididate element, MM 3642 Book block feeder,Endsheet-tipping element MMFE 1237011/ MNEZ1217462, MM 3648, Acoro A7 28 clamps perfectbinder, Main milling station, Roughening and notching station, Hotmelt spine glue unit, hotmelt side glue unit, Additional PUR spine glue unit, Hotmelt Premelter C80 for spine glue, Hotmelt premelter for side glue, Premelter for PUR spine glue, Pile cover feeder, Ansi water scorring, Scorring system, Double nipping station, Laydown system, MM drying conveyor system approx 50 meter, Reject gate, Muller martini 3671 Three knife trimmer Merit S year 2007 Machine number 1237011 MMEZ 1247462  ...

Condition: Very good condition

Used sachet packaging machine made by Consumasz AP-10/240. New 1998. Technical parameters: Dimensions: - length 1350 mm - width 1520 mm - height 2350 mm - weight: approx. 450 kg - sachets dimensions: width   85 to 115 mm (for two-track operation)   85 to 180 mm (for single-track operation) length   80 to 240 mm - product volume in sachet: 5 to 150 cm3 - power consumption: 1.5 kW - service: 1 person Efficiency: - in a two-track system up to 80 sachets / min - in the single-track system up to 40 sachets / min

Code: 0320 Brand: SAC SUERI - ITALY Model: T 4 - CE Standard Electronic tenoning machine for wooden frames, doors, cabinet doors, furniture, and various - CE Standard Technical data: End trimming saw with continuous axis positioning - Horizontal stroke 130 mm - Motor power 3,2 Kw - Blade diameter 400 mm Hole 30 Tenoning spindle - Spindle length 320 mm - Spindle diameter 50 mm - Motor power 5,5 Kw - Continuous axis positioning - Max tool diameter 350 mm Tenoning carriage table size 750 x 900 mm - Motor power 1,1 Kw - Working speed 3/10 mt/min - Positioning speed 30 mt/min - Tilting guide - Guide with stop and display Min workpiece height 30 mm Max workpiece height 90 mm Min workpiece width 30 mm Max workpiece width 600 mm Min/max workpiece length 200/3000 mm Max tenoning depth 130 mm Max squaring width 1000 mm Electronic control of all machine functions - Alphanumeric  ...