vacuum packing machine used for sale

Rotary vane vacuum pump Oelumlaufgeschmiert warranty: 12 months Manufacturer: Becker type: U 4,250 SA/K Engine: DS 400V Suction power: 250 m ³/h Discharge pressure: 3 mbar (ABS.) Status: very good condition. Reconditioned Accessories: oil (petroleum) Delivery time: Please enquire Further details or technical assistance like via request; ready for operation

Rotary vane vacuum pump Status: Generalueberholt; Asgood Performance: 12 months Lierfertime: from stock Manufacturer: Busch Type: R5 RA 165D Engine: 400V equipment: Mineraloel o. Syntetisches Oel Nominal suction systems: 160m3/h end pressure: 0.5 mbar (abs .) Oil filling (mineral oil); Vacuum suction filters delivery time: from stock (intermediate sale reserved) If you have any questions about vacuum technology, we are happy to provide you with information; ready for use

For sale is a new and unused Busch COBRA Industry NX 0450 A LH1 screw vacuum pump. The pump was delivered in December 2025 and has never been used. The dry-running screw vacuum pump is ideal for industrial applications such as foundries, plastics processing, packaging technology, vacuum systems and many other production processes. Technical data Manufacturer: Busch Type: COBRA Industry NX 0450 A LH1 Year of manufacture/delivery: December 2025 Condition: New, unused Pumping speed: 350 m³/h (50 Hz) Final pressure: 0.5 mbar Motor power: 7.5 kW Voltage: 400/690 V, 50 Hz Speed: 2,900 rpm Degree of protection: IP55 Water cooling Sealing Material: FKM The pump is supplied with a nameplate and documentation. Invoice from December 2025 available. Viewing possible by arrangement.

Auction-ID: A1-50093-245

Vacuum station with 2 Busch vacuum pumps. Very little run!

Vacuum lifter, vacuum lifter from Schmalz for heavy plates with new suction rubber Load capacity 150kg horizontally and vertically Vacuum cleaner can be swivelled 90 degrees motorised Suction box 1000 x 675mm Acoustic warning signal in case of too low vacuum 400V, 1.5kW Can be attached to on-site chain hoist CE mark No test book available Vacuum cleaner rubber renewed Mint condition The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Vacuum lifting device for paper rolls NAGRON AEROLIFTVacuum lifter for the paper industryWoudenberg Holland type R96-20Fabr. No. 9745 Year of construction 1999Load capacity 2000 kgCentering mandrel 90 mmSuction surface Outer diameter 850 mm (plus seal)Suction surface Inner diameter 250 mm (minus seal)Sealing width 50 mmSuction surface 0.5 m2Vacuum min. -800 mbarPumping speed approx. 100 m³/h per vacuum pumpMotor power 2x 2.2 kWNet connection 400 Volts, 50 Hz- 2 pieces Rietschle

Vacuum lifting device, vacuum lifterCustom-made as a handling device for an industrial robotYear of construction 2008Load capacity approx. 60 kgSuction foot spacing min. 120 x 150 mmSuction foot spacing max. 700 x 600 mm- 4 suction feet 100 mm- 4 vacuum ejectors, vacuum generator PIAB with compressed air connection 8 mm - 2 pieces cross member, adjustable in width via servo drive from 150-600 mm- suction foot spacing via 2 servo drives adjustable from 120-700 mm- suction cup adjustment via 3 pieces of servo motors REXROTH MSK040C-0600-NN-M1-UP0-NNNN- Very elaborate and

Vacuum lifting device, vacuum lifter FESTOSorld production as a handling device for an industrial robotYear of construction approx. 2008Load capacity approx. 50 kg- 7 pieces suction plate 32 mm (construction intended for 12 pieces)- 16 pieces suction plate 42 mm (construction intended for 20 pieces)- 5 pieces suction plate 60 mm (construction intended for 6 pieces)- a few suction feet are missing, see pictures- swivelling base body for suction surface in 90 angles or flat 180- base body pneumatically swivelling- Very elaborate and precise construction with

Debus DDS 118 / 5/ 23 Chips Industrial Vacuum Cleaner 6 bar 4.6 m³/min Original price 4604,- € Manufacturer: Debus Model No.: DDS 118 Full Name: DDS 118/5/23 Chips Year of Make: 2016 Fabr.-Nr.: 278 Operating pressure: 6 bar Suction power: 4.6 m³/min Air requirement: 1.3 m³/min Weight: approx. 30 kg Capacity: approx. 40 litres Dimensions: 55 cm long, 60 cm wide and 150 cm high Condition: used Scope of delivery: see pictures Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosts. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machines More items - new and used - can be found in our shop! International shipping costs on request!

Complete mobile pump stand from Pfeiffer Vacuum, consisting of a powerful Roots pump MKP 1000 A (1070 m³/h), a DUO 250 (250 m³/h) and a DUO 20 (20 m³/h). The system is mounted on a stable chassis and designed for continuous industrial use . DUO 250: 250 m³/h, 7.5 kW, 960/1155 1/min, built in 2000, SN 20033767; WKP 1000 A: 1070 m³/h, 3 kW, 2840 1/min, built in 2000, SN 22002938; DUO 20: 20 m³/h, built in 2003, SN 20218928 Auction-ID: A7-49816-101

Machine for spare parts. Industrial heated vacuum/membrane press manufactured by Global Vacuum Presses / Nabiurs Developing S.L., Spain, suitable for forming, laminating and veneering applications. The manufacturer’s plate confirms year 2013, serial number 1212270, machine weight 2,370 kg, rated pressure 9 t/m², and installed power 29.16 kW. Electrical supply is 3-phase, 380 V, 50 Hz, with rated current of 43.5 A. Auction-ID: A7-50083-29

GRABO Plus in case + extra GRABO battery - Electric portable vacuum sucker - Hand tool - Lifting capacity 120 kg Auction-ID: A1-40898-204

Vacuum Vacuum Cleaner Manufacturer Nilfisk Type VHW 321 L Year of construction 2013

Professional wet and dry vacuum cleaner, 80 liters 3000 watt, 3 motors incl. accessories, unused in box Auction-ID: A1-40421-223

✨Vorwerk Kobold VK 140✨ EB 360 Vacuum Cleaner Stick Vacuum Cleaner Auction-ID: A1-50540-131

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-

Vacuum table machine WEBOMATIC Single-chamber machine -NEW- 230 Volt Chamber size: 370x400x130 mm Sealing strip: 1 x 350 mm with pexiglass lid

Manufacturer: LOGIPACK Type: TF-XM Power: 2 kW Weight: 210 kg Dimensions: 900 x 650 x 1600 mm Power supply: 400 V, 50/60 Hz -Made of stainless steel -Vacuum + possibility of fumigation -Control MC -Single Chamber 2 trays at the same time -Internal dimensions of the Chamber 400 x 290 x 200 mm -Dimensions of the shell 220 x 140 mm -Internal tool dimensions of 215 x 130 mm -Maximum foil width 430 mm -Pump 40 m3/h Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Handtmann VF 50 vacuum filling machine for filling, portioning, linking, MC-control, filling capacity up to 2,600 kg/h, pressure up to 55 bar, 420 port./min, portioning from 5-100.000 g., with linking device. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Vacuum filler Robby, filling, portioning, linking, pc control. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Vacuum filling machine Frey Konti A 50, filling, portioning, linking, max. 2300 kg/h, filling pressure max. 30 bar, portioning speed max. 300 port./min, all stainless steel, CAN control, impulse control for clipping machine, filling pipes with different caliber. The machine is currently in the refurbishing and can be tested in our facility in Koblenz, Germany.

Producer: Alpina Description: -Hopper capacity: 60l -Paddle rotor (teflon paddles) -Twister -Efficiency approx 300kg/h

Handtmann VF 616, year of manufacture 2006, vacuum filling machine for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar. The machine is immediately available and can be seen in Koblenz, Germany.

Handtmann VF 608, vacuum filling machine for filling, portioning, linking, compact monitor control, linking device, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g. The machine is immediately available and can be tested in Koblenz, Germany.

Frey Heinrich 20 piston filler, 20 liters piston filling machine, including filling pipes. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Handtmann VF 616 + PLH 216 sausage unit / hanging unit, consists of vacuum filling machine Handtmann VF 616 for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar, with Handtmann PLH 216 hanging machine. The sausage unit is currently in the refurbishment and can be tested in Koblenz, Germany.

Handtmann VF 610, vacuum filling machine for filling, portioning, linking, compact monitor control, filling capacity up to 3.000 kg/h, pressure up to 35/50 bar, up to 450 port./min. The machine is immediately available and you are very welcome to test the machine in Koblenz, Germany

Vacuum filling machine Vemag Robby, filling, portioning, linking, pc control. The vacuum filler is currently in the refurbishment and you are very welcome to test the machine in Koblenz, Germany.

Frey F-Line F50 vacuum stuffer, vacuum filling machine for filling, portioning, linking, CAN control, filling capacity up to 2.200 kg/h, filling pressure up to 30 bar. You are very welcome to test the machine in our facility in Koblenz, Germany.

Handtmann hanging line consits of Handtmann VF 100 and PLH 216, vacuum filling machine Handtmann VF 100, vacuum stuffer for filling, portioning, linking, case holding device, PCK control, with loading device, filling performance (variable adjustable) max. 3000 kg/h, filling pressure max. 55 bar, with Handtmann PLH 216 hanging machin.

Handtmann VF 610, vacuum filling machine for filling, portioning, linking, compact monitor control, filling capacity up to 3.000 kg/h, pressure up to 35/50 bar, up to 450 port./min. The machine is immediately available and you are very welcome to test the machine in Koblenz, Germany

Handtmann VF 608, vacuum filling machine for filling, portioning, linking, compact monitor control, linking device, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g. The machine is immediately available and can be tested in Koblenz, Germany.

Handtmann FA 30 Top piston filling machine, piston filler for filling, portioning and linking. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany

Double chamber vacuum packaging machine Komet SD 320, MC control, all stainless steel, high performance vacuum pump, electronic control, inlet plates for height adjustment. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Vacuum stuffer Handtmann VF 100, vacuum filling machine for filling, portioning, linking, loading device, mc control, body all stainless steel, filling performance 3000 kg/h, pressure up to 55 bar, 420 port./min. You are very welcome to test the machine in Koblenz, Germany.

Handtmann VF 620 vacuum filling machine with linking gear box, filling, portioning, linking, monitor control, with loading device for 200 liter standard trollies. You are very welcome to test the machine in our facility in Koblenz, Germany.

Handtmann VF 80/160 vacuum filling machine with loading device, linking device 34-4, vacuum stuffer machine for filling, portioning, linking, mc control, microcomputer control, filling capacity 3.000 kg/h, pressure up to 35 bar, portioning range 5-100,000 g, hopper volume 90/160 liters. You are very welcome to test the machine in our facility in Koblenz, Germany.

Double chamber vacuum packaging machine Röschermatic VM-42/2/C, MC control, all stainless steel, high performance vacuum pump, electronic control, inlet plates for height adjustment. You are very welcome to test the machine in our facility in Koblenz, Germany.

Handtmann VF 608, vacuum filling machine for filling, portioning, linking, with servo drive, compact monitor control, filling capacity up to 2.000 kg/h, pressure up to 40 bar, 300 port./min, portioning from 5-100.000 g., with linking device You are very welcome to test the machine in our facility in Koblenz, Germany

Vemag Robot 500 vacuum filling machine / dough portioner, double screw System, for filling, portioning, linking, microcomputer control, filling capacity up to 2,500 kg/h You are very welcome to test the machine in our facility in Koblenz, Germany.

used Handtmann VF 630 vacuum filling machine for filling, portioning, linking, year of construction 2008, with linking device 34-5, for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 10.200 kg/h, pressure up to 40 bar, up to 700 port./min., portioning range from 5-100,000 gram

100L stainless hopper, adjustable fill size on mobile stainless frame

Handtmann VF 628 vacuum filler with inline grinding system GD 93, filling, portioning, linking, monitor control, filling capacity 6.000 kg/h, pressure up to 72 bar, hopper volume 90/350 liters, arm lifting device, refurbished.

Multivac R 530, rigid films + soft film, film width 420 mm, trigger 560 mm 2.3, MAP fumigation, long loading, jumbo roll holder for film, double film holder for top film, printing mark control, 3 x cross cutting for soft slide, 3 x hard foil stamping

Description Filler Handtmann model VF300 is a computer controlled vacuum filler offering very high performance with innovative technical solutions applied. Model VF300 is ideal for the production of meat products and find it applies in large and small manufacturing plants. The device is a very accurate-allows you to achieve the highest quality of the product. Handtmann applied in your device pneumatic lift mechanism for automatic loading. Specification: Brand: Handtmann Model: VF300 Volume: 300 L Dimensions: 2030 x 1750 x 1400 (mm) Power supply: 400V 50 Hz 3N Power: 6.5 kW

Handtmann VF 616 + PLH 216 hanging line Z-Version”, consisting of vacuum filling machine Handtmann VF 616, with linking device 34-5, for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar, including Handtmann hanging line PLH 216 with casing holding device 216, and hanging unit 241-16 and 216-22, all machines will be refurbished after confirmation of order.

Handtmann VF 50 with attachment FPA