134,074 used machines on RESALE, but how to find them? Machine Search
Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 200 x 60 mm -Clamping depth: 250 mm -Dimensions: 520/280/H195 mm -Weight: 73 kg
Edge gluing machine Sumbel Coronel 120; good condition; cleaned and tested; Working width 120mm; 2-rollers; suitable for cold glue; Glue basin adjustable in height. Edge gluing machine Sumbel Coronel 120; good condition; cleaned and checked; working width 120mm; two rollers; used for cold glue; glue reservoir adjustable in hight.
IMA BFB MS300A collator and stretch bander for cartons Carton Size range: minimum 65 x 20 x 12 mm, max. 160 x 95 x 95 mm Bundle size range: minimum 65 x 80 x 30 mm, max. 180 x 320 x 160-210 mm (push-in width x depth x height) Maximum reel diameter 300mm, reel core diameter 70-76mm Includes discharge rake to remove bundles from the machine (prevents heating the product) Siemens S7-300 PLC with UniOP HMI Capacity up to 40 bundles per minute 6 bar compressed air Footprint 2865 x 1265mm approx. x 1945mm high Weight approx 1500kg.
Used spiral kneader KEMPER, type: ST 75 A -Refurbished - for 120 kg of dough or 75 kg flour - incl. 2 extendable tank wagons - Condition: Very good, ready for immediate use - 6 months warranty Sightseeing and test run are possible by arrangement.
Machine vice, sturdy vice, drill press vice -Jaw width: 160 x 40 mm -Clamping depth: 190 mm -Machine vice: rotatable -Dimensions: 500/380/H170 mm -Weight: 43 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 510 mm -Clamping depth: 345 mm -Dimensions: 650/510/H230 mm -Weight: 91 kg
Nibbling machine, nibbler, nibbler, tin snips, circular shears -Power: 330 watts -Voltage: 220 V -Max. Cutting capacity: 2 mm -Dimensions: 280/60/H150 mm -Weight: 2.3 kg
Thread cutter, tapping machine, tapping machine -Nominal consumption: 280 watts -Max. Cutting capacity: M8 -Connection: 220 volts -Dimensions: 290/200/H60 mm -Weight: 2.1 kg
Linear brush Tresy for cleaning system Wandres Technical data: • Usable width A (mm): 3200 • Order number: 6732601 • Available: 2 pieces
E.C.H WILL ROTEX – TRI Year: 1987. One real stand. Diameter 1.2 max width 96 cm 4 hole perforation Print 2/2 Cross cutter 2 cover feeder Counting and collecting, Stitching unit Folder, Square back press. Long side cutting/short side cutting Speed: 400 m/ min Max 60 stroke/ min Cross Cuter: 300 mm, 355 mm, 420 mm and 455 mm From spare parts have gears for sheet count, knifes, stitching heads, printing cilindars.
Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 250 x 50 mm -Clamping depth: 290 mm -Dimensions: 540/330/H220 mm -Weight: 70 kg
Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 160 x 50 mm -Clamping depth: 105 mm -Dimensions: 480/250/H160 mm -Weight: 49 kg
Machine vise, sturdy vise, drill vise -Jaw width: 200/60 mm -Clamping depth: max. 237 mm -Dimensions: 540/195/H150 mm -Weight: 54 kg
Product number: 1794 Type: Multipack RC11-80 U Serial number: 04AF353 Year of construction: 2004 Capacity: max 80 packs/min .Glue unit: Nordson Problue 4 hot melt Power: 3 x 400V, 50Hz Dimensions: 7500 mm x 1550 mm x 2900 mm
Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : Collmann Type : 2x Hydo 24 chocolate depositor 1x hydraulic unit included YOM : 2001 Output : up to 25 cycle/min We offer this machine in as-is where it is condition, without warranty, ex warehouse/location (Incoterms EXW), without packaging ex warehouse Hess. Lichtenau (EXW),unpacked
Strapping machine, packaging machine -Semi-automatic: Pallet strapping -on: built-in transport frame -Voltage: 230 V -Dimensions: 650/800/H1250 mm -Weight: 102 kg
Double end profiler, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 7.5 kW -Speed: 2860 rpm -Voltage: 380 V -Shaft holder: Ø 40/80 mm -Price: per piece -Number: 2 pieces -Dimensions: 675/250/H255 mm -Weight: 98 kg
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 70 by 98 mm -Bore: Ø 41.3 mm -Dimensions: 155/90/H150 mm -Weight: 6.8 kg
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 70 by 98 mm -Bore: Ø 45 mm -Dimensions: 155/90/H150 mm -Weight: 6.3 kg
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 110 by 135 mm -Drawing: in the photos -Dimensions: 210/90/H220 mm -Weight: 8.6 kg
The laser BYSTRONIC BYVENTION 3015 was manufactured in 2009 in Switzerland. The laser cutter is equipped with two cutting heads: 5 and 7.5 inches. Technical parameters : - laser source power: 2200 W - punching machine hours: 17487 h - 2 cutting heads: 5 and 7.5 inches - maximum size of the processed sheet: 3000 x 1500 mm - maximum cutting thickness, black steel: 8 mm - maximum cutting thickness, stainless steel: 6 mm - maximum cutting thickness, aluminum: 4 mm
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Circular saw motor in: flat design -Motor: 1.85 kW 2870 rpm at 50 Hz -Shaft holder: Ø 30 mm -Number: 2x motors available -Price: per piece -Dimensions: 390/120/H185 mm -Weight: 15 kg
Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling: 0 - 3 mm -Drive: 0.45 kW -Angle: adjustable -Dimensions: 485/345/H250 mm -Weight: 18.2 kg
TIG welding machine, welding machine, TIG welding machine -WIG welding machine direct current -Max. Welding power: 400 A. -Water-cooled -Incl. Ground cable -Gas valve -Dimensions: 610/1140/H930 mm -Weight: 310 kg
1 VIRGINO RIMOLDI roll slitting machine type TMF RN160AV. Machine used to obtain tapes of different widths, whether the fabric is wrapped "in line" or on the bias. Cutting system with motorized disc blade and manual feed. The fabric roll is supported by a shaft that enters the cardboard tube where the fabric is rolled on. The shaft is motorized and its rotation is synchronized with that of the disc blade, ensuring a clean and precise cut. Device for sharpening the disc blade. Width of the strips to cut: from 20 to 130 mm. Maximum width of the fabric roll: 1,600 mm. Maximum cutting diameter 230 mm. Diameter of the roll holder bar: 45 mm (for carton tubes of inside diameter 46 mm and outside diameter 50 mm).
Circular saw sharpening machine Vollmer Cne
TECHNICAL DATA: Working width mm: 400 Workpiece length min mm: 350 Thickness mm: 150 No 2 brushing units (Turnable) Total connection kW: 1,83 Weight Kg: 1200
Key data: 500 , 350 , 300
Travel X 500 / Y 350 / Z 300, Water bath machine, automatic wire threading, incl. 20 KG option incl. cooler
Double bench grinder, double grinding machine, pedestal grinder, bench grinder, drill grinding machine -Grinding disc: max. Ø 200 x 32 mm -Speed: 3000 rpm -Engine power: 0.9 kW -Operating voltage: 380 volts -Dimensions: 1100/540/H1140 mm -Weight: 125 kg
Table version for small cartons Label from above Dimensions: 1,100 x 600 x 600 mm high
Spare parts for smooth cutting head board Baader 424 / 429 (Straight Cut Heading Machine Baader 424 / 429). Almost all spare parts are available in stock or at short notice.
Product number: 1832 Type: VM400/30 Serial number: 001 Belt width: 400 mm Capacity: max. 30 strokes/min Air consumption: 6 bar Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2000 x 800 x 1800 mm Weight: 550 kg
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.5 kW -Speed: 1420 rpm -Max. grinding wheels: Ø 350 x 32 mm -Operating voltage: 380 volts -Dimensions: 740/600/H1175 mm -Weight: 238 kg
Hole drum 6 mm (drum 3 mm soft) for de-stretching machine Baader 697. New and unused, ready to ship immediately.
Industrial Metal and plastic cleaning machine: COLOR-DEC ITALY GREAT CONDITION
Huller thread cutting machine vith hydraulic vice. Thread head from M3 up to M27 Machine is perfect for serial work.
Ring bending machine, profile bending machine, three-roll bending machine, bending machine -Outer diameter: 200 mm -for: 35 mm pipe -Bearing seat: Ø 55 mm -Bore: Ø 49 mm -Quantity: 2 rolls available Price: complete -Dimensions: Ø 200 x 81 mm -Weight: 11 kg
TECHNICAL DATA: Working width mm: 1600 No 2 side brushes Lengthwise brushing unit Horizontal brush Horizontal brush Brush roller (transversal) Weight Kg: 2500 Total power installed kW: 11
REALMECA MINI C3X-CNC VERTICAL 1 phase machining milling machine Used for teaching begginers. Perfect condition
Tapping machine, pipe thread cutter -for pipe size: max. 2 inches -with: cutting jaws -Speed: rpm -Foot switch with emergency stop function Pipe cutter -Interior deburrer -Operating voltage: 220 volts -Dimensions: 1200/660/H1250 mm -Weight: 166 kg
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 278 by 218 mm 38 mm high -Drawing: in the photos -Dimensions: 450/95/H295 mm -Weight: 13 kg
Angle sealer with shrink unit, vacuum packaging system, vacuum packaging machine, hood shrink machine, hood shrinker, film packaging machine -electronic temperature control -max. Pack size: 800 x 600 x 310 mm -Max. packaging weight: 18 kg -Dimensions: 1870/1010/H1200 mm -Weight: 212 kg
MAHO MH-700 with numeric control X, Y Table size: 800x300 Working area: X-450,Y-250,Z-300 Spindle taper: MK3 Feed range: 7-250mm/min Vertical head swiveling 90 degreess Power: 3KW Dimensions: 1300x1200x1700
Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 90 mm -Admission: -Drawing: in the photos -Dimensions: 140/135/H160 mm -Weight: 4.7 kg
LINX-SL501-CO2-Laser Engraving machine equipped with fume extraction unit. Machine in perfect working condition. LINX SL 501 is one of the fastest Laser marking machines ever, it makes 90 marks per minute and its developed for the line productions for marking glass, papers, plastic and other non metal parts, As well metal, but just taking coloured skin out.
Bag width up to 20 cm, Bag length up to 32 cm, machine in production
maximum number of results exceeded
please refine your search
