vacuum packaging machine used for sale

Key data: 500 , 41 , 22

Manufacturer: Demag Type: Ergotech 35-115 viva Built: 1998 Control: NC 4 Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3 m x 1.1 m x 1.6 m Weight: 2500 kg Screen text: German Additional equipment Core train: x1

Machine vice base plate, clamping plate, vise plate, rotary table -Rotary table: Turntable for vise -T- Round groove: Ø approx. 217 x 18 mm -Recess: Ø 90 mm -Degree display -Dimensions: 275/340/H90 mm -Weight: 20.6 kg

Key data: 800 , 149 , 35

Manufacturer: Demag Type: 80/420 - 310 concept Built: 2005 Control: NC 4 Control Type of closure: Hydraulish Closing force: 800 kN Tie bar ratio: 420 mm x 420 mm Plate size: 580 mm x 590 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 35 mm Lifting volume: 149 gram PS / 168.3 cc Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 8.8 kW Dimensions: 3.9 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German Optional extras Core train: x1

Quill for jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Stroke: 60 mm -in: a wooden box -Dimensions: 390/340/H170 mm -Weight: 15.8 kg

Key data: 1000 , 205 , 40

Manufacturer: Demag Type: 100/420 - 430 concept Built: 2004 Control: NC 4 Control Type of closure: Hydraulish Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 590 mm x 600 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 40 mm Lifting volume: 231 cc / 205 gram PS Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 11.1 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 4800 kg Screen text: German Optional extras Core train: x1 Air valve: x1 Robot interface

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 220 V -Mechanics for: cutting jaws missing -Dimensions: 1100/700/H1130 mm -Weight: 132 kg

Key data: 350 , 34 , 22

Manufacturer: Battenfeld Type: Plus 350/75 Built: 2004 Control: Unilog B2 Closing force: 350 kN Closing type: Hydraulic Tie bar ratio: 270 mm Plate size: 470 mm x 285 mm Tool installation height: min. 150 mm max 250 mm Opening distance: 200 mm Plate spacing max.: 450 mm Screw: 22 mm Lifting volume: 38 cc Spray weight PS: 34.5 gram HP Spray pressure: 1627 bar General Engine: 7.5 kW Heating: 2.7 kW Dimensions: 2.3 m x 0.9 m x 1.3 m Weight: 1100 kg Screen text: German / English Additional equipment Robot interface

Key data: 500 , 130 , 35

Manufacturer: Battenfeld Type: BA 500/210 TM Built: 2000 Control: Unilog B2 Closing force: 500 kN Closing type: Knee lever Tie bar distance: 320 mm x 320 mm Plate size: 490 mm x 490 mm Tool installation height: min 150 mm max 350 mm Opening distance: 250 mm Plate spacing max.: 600 mm Screw: 35 mm Lifting volume: 144 cc Spray weight PS: 130 gram PS Spray pressure: 1500 bar General Engine: 11 kW Heating: 10.4 kW Dimensions: 3.3 m x 1.1 m x 1.7 m Weight: 2500 kg Screen text: German / English Additional equipment Robot interface Core train: x1

Key data: 750 , 198 , 40

Manufacturer: Battenfeld Type: BA 750 - 350 TM Built: 2000 Control: Unilog B4 Closing force: 750 kN Closing type: Knee lever Tie bar distance: 370 mm x 370 mm Plate size: 590 mm x 590 mm Tool installation height: min 200 mm max 400 mm Opening distance: 330 mm Plate spacing max.: 730 mm Screw: 40 mm Lifting volume: 220 cc Spray weight PS: 198 gram PS Spray pressure: 1595 bar General Engine: 15 kW Heating: 12.1 kW Dimensions: 3.8 m x 1.3 m x 1.8 m Weight: 3300 kg Screen text: German / English Additional equipment Robot interface Core train: x1

Key data: 1000 , 291 , 45

Manufacturer: Battenfeld Type: BA 1000/525 TM Built: 2002 Control: Unilog B4 Closing force: 1000 kN Closing type: Knee lever Tie bar ratio: 420 mm x 420 mm Plate size: 640 mm x 640 mm Tool installation height: min 200 mm max 450 mm Opening distance: 330 mm Plate spacing max.: 830 mm Screw: 45 mm Lifting volume: 318 cc Spray weight PS: 291 gram PS Spray pressure: 1659 bar General Engine: 18.5 kW Heating: 13.8 kW Dimensions: 4.1 m x 1.3 m x 1.8 m Weight: 3900 kg Screen text: German / English Additional equipment Robot interface Core train: x2

SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control). BEST PRICE IN EUROPE

Machine vise base plate, clamping plate, vice plate, turntable -with: T- round groove -Grad display -Dimensions: 235/175/H50 mm -Weight: 6 kg

SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE

Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Table dimensions: 700 x 405 mm -Travel: Z 330 mm/Y 410 mm/X 630 mm -Quill stroke: 155 mm -Recording: MK4 -Speeds: 31 - 1500 rpm -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Copy router: Wegoma SK6 -Copy router: swiveling -with support rail length: 1910 mm -Motor: 220 V 1.4 kW -Spindle speed: 22000 rpm -Dimensions: 500/460/H1530 mm -Weight: 46.5 kg

SHARK 512 SXI evo, semi-automatic electro-hydraulic sawing machine with 4640x34x1,1 mm band, to cut pipes, profiles and beams up to 510×320 mm at 0°. Extremely versatile machine, for cuts between 60° left and 60° right. CUTTING CYCLE: after having positioned the bar, starting the cycle the following operations are performed: vice closing – motor start – head descent for cutting – motor stop – head return – vice opening. CYLCE DOWN UP: Operating in semiautomatic cycle , the new function DOWN makes the head and blade motor stop once the cut is finished with the vice closed, by pressing the UP button the head raises back to its starting point and the vice opens. ASK FOR EVERY MODEL OF MEP MACHINES, WE HAVE THE BEST PRICES IN EUROPE

COBRA 352 SX evo, semi-automatic electropneumatic sawing machine to cut aluminium and light alloys using blade with electrowelded hardmetal plates (HM). The machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts. Sawing machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. OPERATION: Starting the cycle by means of the relative push-button the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens. BEST PRICES IN EUROPE FOR MEP MACHINES! ASK FOR A QUOTE

Control CC 100 for ENGEL injection moulding machines

Used 4 flanges fit on a JUNG, HF 50 (R or RD) Scope according to pictures ! ( 4 flanges , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 0.15/0.22 kW 11160/17250 rpm at 133/200 V/200/300 Hz -Shaft holder: Ø 15 x 15 mm -Dimensions: 190/70/H95 mm -Weight: 1.8 kg

Steel stairs, external stairs, machine stairs, machine steps, add-on stairs -Design: stable design, as a machine step -Step sizes: 500 x 300 mm -Height: upper step 320 mm -Dimensions: 760/590/H400 mm -Weight: 56 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Jaw height: 58 mm -Clamping depth: max. 190 mm -Number: 1x vises available -Price: per piece -Dimensions: 520/280/H155 mm -Weight: 55 kg

Machine vise, sturdy vise, drill vise -Jaw width: 160 mm -Back height: 47 mm -Clamping depth: max. 157 mm -Number: 1x vices available -Price: per piece -Dimensions: 460/226/H130 mm -Weight: 33 kg

Siemens Small X-ray / Intraoral Device Heliodent MD with tube SR 60/70/7 0.7 • Before takeover, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "IST" state from the freiberg (EXW), Saxony, Germany, and prepayment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation and configuration of the system or parts must be carried out by a specialist or technician authorized by the manufacturer! • The offer is subject to interim sale.

Machine vise, sturdy vise, drill vise -Jaws depending on the workpiece geometry: movable -Jaw width: 65 x 87 mm -Clamping depth: max. 15 mm -Weight: 4 kg

Machine vise, sturdy vise, drill vise -Jaw width: 220 x 60 mm -Clamping depth: max. 385 mm -Dimensions: 800/340 / H170 mm -Weight: 94 kg

hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulic machine vice -Jaw width: 125 x 45 mm -Clamping depth: 150 mm -Dimensions: 430/210/H110 mm -Weight: 30.5 kg

Machine vice, vice, drill press vice -Jaw width: 280 mm -Back height: 150 mm -Clamping depth: max. 470 mm -Dimensions: 920/400/H255 mm -Weight: 152 kg

Spreading attachment PIETSCH STA 1.7 MW series 2000, capacity 1.7 m3, conveyor belt, tarpaulin folding roof, spreader rubber, drive via vehicle hydraulics, with remote control and support supports. Sale as is or in parts possible.

Material: PE, PP, PS, ABS / Details: three-phase motor, DC, segmented screws and cylinders, degassing, vacuum pump, screw speed: max. 600 rpm, control: Resotec PLC

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Max. welding power: 350 A -Accessories: Welding cable with electrode clamp, ground cable -Quantity: 1 welding machine available -Price: per piece -Dimensions: 390/550/H530 mm -Weight: 56 kg

Counter bearing, bearing block, pillow block, bearing for milling machine, upper support -Dovetail: 11 by 94 mm 16 mm high -Drawing: in the photos -Dimensions: 730/160/H110 mm -Weight: 28 kg

CNC fine lathe Make: PetrolGer Type: TNL Control: Siemens 810T Built: 1991 Equipment and accessories: - Swivel loader system - Small conveyor belt - Charging-unloading gripper - Chip conveyors - Foot lever for clamping and relaxing the collet

3000 x 1500mm / 5000w / Siemens 840 - Single Head Technology

Machine vise, sturdy vise, drill vise -Jaw width: 210 x 65 mm -Clamping depth: 410 mm -Dimensions: 800/345/H170 mm -Weight: 87 kg

Channel folding machine, folding machine, folding former, seam closing machine, folding former, sheet metal bending machine, profiling machine -Rolls: 20 -Distance rings: 14 -Executions: different -Take: Ø 28 mm -Price: complete -Weight: 21.4 kg

Offer via gebr. Suhner Shaft Grinding Machine Rotofera DKM 4 Flexible shaft machine shaft grinding machine grinding Rotofera The 7-speed transmission Speed range: 850, 1600, 2100, 3200, 5700, 8000 and 12000 min-1 (400 V, 50 Hz, 3 Ph, 1.0 kW) Mobile Continuous - Separation of motor and tool guaranteed fatigue-free working Applications - Grinding - Disconnect - Roughing - Milling - De-rusting - Polishing - Brushes For light work, especially stainless steel, boiler and steel construction, polishing workshops, apparatus construction, kitchenand hospital supplies, etc.

Offer via gebr. Suhner Shaft Grinding Machine Rotovar DKM 7 Flexible Shaft Machine Shaft Grinding Machine Grinding Rotovar DKM7 Range: Wave A, 1000-12000 rpm. Wave B, 4600-40000 rpm. (400 V, 50 Hz, 3 Ph, 3.2 kW) incl. accessories 1 belt grinding head 1 brush grinding head Continuous - Separation of motor and tool guaranteed fatigue-free working Applications - Grinding - Disconnect - Roughing - Milling - De-rusting - Polishing - Brushes For light work, especially stainless steel, boiler and steel construction, polishing workshops, apparatus construction, kitchenand hospital supplies, etc.

Offer via gebr. outdated pipe cutting and chamfering machine Fabr. GF GEORG FISCHER Type RA8 / RA230 Saw has been completely overhauled and tested. - completely new engine. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Machine lamp, machine lamp, work area lamp -Lights: are not used -Dimensions: 1020/320/H140 mm -Connection: 230 V DC 1x39 W -Number: 3x lights available -Price: per piece -Weight: 16 kg/piece

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Double grinding machine: Type ES200 PW -Grinding discs: max. Ø 230 mm -Motor: Power 0.55 kW -Speed: 2800 rpm -Voltage: 380 V -Dimensions: 510/320/H1230 mm -Weight: 54 kg

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Knife disinfection machine, knife disinfection device -GENO: dishwasher 1988 -Metal case with: accessories see photo -Dimensions: 510/410/H210 mm -Weight: 19.5 kg

Offer via gebr. Suhner Shaft Grinding Machine Rotofera DKM 4 Flexible shaft machine shaft grinding machine grinding Rotofera The 7-speed transmission Speed range: 850, 1600, 2100, 3200, 5700, 8000 and 12000 min-1 (400 V, 50 Hz, 3 Ph, 1.0 kW) Continuous - Separation of motor and tool guaranteed fatigue-free working Applications - Grinding - Disconnect - Roughing - Milling - De-rusting - Polishing - Brushes For light work, especially stainless steel, boiler and steel construction, polishing workshops, apparatus construction, kitchenand hospital supplies, etc.

Channel folding machine, folding machine, folding former, seam locking machine, folding former, sheet metal bending machine, profiling machine -Number: 14 pieces rolls -various: versions -Recording: Ø 28 mm -Price: complete -Weight: 22.5 kg

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Printing machine, embossing machine, stamping machine -without function, control: defective -pneumatic-hydraulic press - Stroke: 50mm - clearance between columns: 850 mm -Table surface: 400 x 370 mm -Dimensions: 1285/590/H1820 mm -Weight: 416 kg

Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 200 x 60 mm -Clamping depth: 250 mm -Dimensions: 520/280/H195 mm -Weight: 73 kg

Edge gluing machine Sumbel Coronel 120; good condition; cleaned and tested; Working width 120mm; 2-rollers; suitable for cold glue; Glue basin adjustable in height. Edge gluing machine Sumbel Coronel 120; good condition; cleaned and checked; working width 120mm; two rollers; used for cold glue; glue reservoir adjustable in hight.

IMA BFB MS300A collator and stretch bander for cartons Carton Size range: minimum 65 x 20 x 12 mm, max. 160 x 95 x 95 mm Bundle size range: minimum 65 x 80 x 30 mm, max. 180 x 320 x 160-210 mm (push-in width x depth x height) Maximum reel diameter 300mm, reel core diameter 70-76mm Includes discharge rake to remove bundles from the machine (prevents heating the product) Siemens S7-300 PLC with UniOP HMI Capacity up to 40 bundles per minute 6 bar compressed air Footprint 2865 x 1265mm approx. x 1945mm high Weight approx 1500kg.