130,507 used machines on RESALE, but how to find them? Machine Search
1 needle flatbed quilting machine
Semi & Fully Automatic Pallet Wrapping Machine Manufacturer: Cousins Model: LPSWA-CE ("The Switch Semi2Auto") Operating mode: Semi-automatic & fully automatic Year of manufacture: 2021/2022 Features and Specifications of the LP-SWA Series Production speed: Up to 35 loads per hour. Load capacity: Maximum load weight: 4,500 lbs dynamic – 10,000 lbs static Maximum loading size to safely pass the tower: 67" x 67" (96" loading diagonal) x 80" H Maximum loading size to stay inside the turntable: 46" W x 46" L (65" loading diagonal) x 80" H Low profile turntable: 65 inches diameter, laser-cut steel plate with all-round deck protection. Maintenance-free 54 roller bearing support system. Turntable height 2,813 inches from the floor. ANSI No. 50 Direct Chain Drive with Chain Tensioner. Speed between 3 and 12 rpm with smooth starting acceleration . 1/2 HP AC moto ...
Chiller / chiller air-cooled, Type: NTC 20 – 21 kW NOVATECH NOVATECH NTC 20 are air-cooled compact water chillers suitable for indoor / outdoor installation IP 54. Including shell-and-tube evaporator, buffer tank 110 ltr. and built-in circulation pump. Galvanized steel frame, hot painted with polyester powder. Extras: - Mounted expansion tank for internal water content only - Stopcock between water inlet and outlet, - Water outlet string regulating valve Cooling capacity kW 21 Cold water temp. Exit/Entry (°C): 15 / 20 Volume flow (l/min) max. 100 Available pump pressure (bar) max. 3.3 Ambient temperature (°C) 35 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 8.85 Max. current (A) 12.5 Starting Current Circuit (A) 19 Protection class: IP54 Dimensions: Length (mm) 1080, Width (mm) 950, Hei ...
Siemens AXIOM sire Skop SD with the following system components: Generator Polydoros SX 65 Tube Optitop 150/40/80 HC 0.6/1.0 digital image processing Fluorospot compact Image intensifier Sirecon 40-4 HDR 40 cm The sale is to resellers or distributors despite full functionality without warranty as "Used", EXW Freiberg, Saxony, Germany. You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, properly lashed and wrapped with stretch film and can be picked up immediately.
Machine type: CNC centerless grinding machine Make/Model: MIKROSA KRONOS M SPECS CNC Fanuc 21iM grinding wheel max sizes: 250mm wide x 610mm diameter 2 controlled axis on grinding wheel dressing (interpolated) 1 axis on regulating wheel 1 axis on plunge axis (workpiece diameter) Throughfeed grinding: yes Plunge grinding: yes can be inspected under power in our warehouse in Gussago BS (Italy)
Key data: 370 mm, 650 mm, 3500 1/min
Machine Details Stock-No. 1105-04067 Type of machine CNC Lathe Make DAEWOO Type PUMA 250 B Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Corea Delivery time to be agreed Freight basis ex Site Technical details turning diameter 370 mm turning length 648 mm control Fanuc 18 t bar diameter 77 mm swing dia. 570 mm swing diameter over cross slide guide 255 mm max. turning diameter 255 mm drive capacity - spindle motor 18.5/22 kW turning speeds 3500 rpm Turret (X-Stations) 10 pos. JAPAN rapid traverse X-axis 24 m/min total power requirement 32 kW weight of the machine approx. 6 t dimensions of the machine approx. 3.43 X 1.85 X 2 m Additional information GOOD MACHINE WITH CNC FANUC 21 IT 3 JAW CHUCK DIA 250 MM SCHIP CONVoYEUR TOOL SETTER COOLANT INTERLOKED GUARDS
Used concrete block making machine Fabr. Henke / Masa with core and attachment Board size 1400 x 1050 mm stroke head countersunk head vehicle group packaging strapping Chambers in a diverse Formen.Mischanlage is complex, ZementsilosDie now can a ready state, but also to the present Site be continued. For more information, 0171 6232061 or via MailLonz - measuring and RegeltechnikBrunnenstrasse 22 65510 Idstein
Wrapper Universum Kasper Model: HWM 50 Squirrel wrapping machine is mobile for all spears such as Kornspitz and pretzel sticks, etc. Universal Winding Machine for all doughs for wrapping Stainless steel version reinforced Dough filler approx. 20 to 400 g 500 mm belt width upper feed roller coated all belts and scrapers NEW with return function DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Used machine overhauled 3 months warranty + spare parts service Option: Feeding belt EB Service Package E-Box Maintenance contract Instruction & Commissioning Leasing & Rental Service Visit our large cone wrapping machine exhibition!
HF FeinfräÃ? & - grinding spindle, manufacturer Fischer Schaffhausen. Designation; MFVS 830, Series number: EL-S-007 The spindle is undamaged, unused and in their original packaging. The spindle can be used with electrodes and-precision Strausak type. 82 CNC. or as RF - internal grinding spindle. Tech. Data.: 220 V 600 HZ 4-pin 2.5 KVA 1.4 KW / 600 HZ for further information: The grinding technology: Tool &-profile grinding coarser has in 2001 of the production & - Strausak license rights wage purchased. The rights include the complete series 57 U/W, 57 U CNC, 57 W CNC 3.-4.u-5-axis, and from this all developed machines.
Capacity: 120kg of green coffee per roast (480kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Pneumatic green coffee loader, destoner and cyclone included Optional afterburner Gas: natural gas/LPG Burner: Weishaupt (indirect) The roaster is currently disassembled and ready for refurbishing. It will be completely refurbished featuring: new insulation new bearings new direct drive motors with speed control on the destoner, drum and exhaust fan new pneumatics new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profililng) new cooling bin sheathing new modulated Weishaupt burner (other makes by request) new paint (powder coating) Inspection of the roaster is possible at any time Photos of a Probat G60 coffee roaster after refurbishing are also included, as an example of how the G120 ...
Capacity: 120kg of green coffee per roast (480kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Pneumatic green coffee loader, destoner and cyclone included Optional afterburner Gas: natural gas/LPG Burner: Probat - direct The roaster is currently disassembled and ready for refurbishing. It will be completely refurbished featuring: new insulation new bearings new direct drive motors with speed control on the destoner, drum and exhaust fan new pneumatics new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profililng) new cooling bin sheathing modulation of the burner will be installed new paint (powder coating) Inspection of the roaster is possible at any time. Photos of a Probat G60 coffee roaster after refurbishing are also included, as an example of how the G120 will look like.
Fiber laser machine HLF Power: 4kW Sheet size: 3000 x 1500 mm Changing table Siemens touch screen controller with LAN/USB Siemens drives Precitec auto focus Pro cutter cutting head IPG resonator with 4kW is included: Warranty CAD CAM software Commissioning DTL delivery Training offered
Wrapper Universum Kasper Model: HWM 40/60 for all spears such as Kornspitz, pretzels and pretzel sticks, etc. Universal - Combi - Winding Machine for all doughs for wrapping and long rolls Wrapping weight range approx. : 30 to 280 grams depending on TA Bottom cone wrapping machine with long roller for strands and pretzels max 600 mm long upper feed roller coated DGUV V3 tested Output approx. 2000 pieces/hour Machine mobile Connection 400V, 16A-CEE plug Dimensions: 790 x 820 x 1300 mm, WxDxH Used machine overhauled 3 months warranty + spare parts service Option: Wrapping of 300 to 800 grams with train Service Package Maintenance contract E-Box Instruction & Commissioning Leasing & Rental Service We have a wide range of winding machines in stock!
Forte cold circular sawing machine with roll feed. Outfeed table and bundle magazine doesn't exist.
Roll forming system with 2 stations + prepare station for U-profile
Convolute (excerpt) from different tools - see picture
Winding Machine Squirrel Winding Machine Universum Kasper Model: HWM 60/80 for all spears such as Kornspitz, pretzels and pretzel sticks, etc. Universal - Combi - Winding Machine for all doughs for wrapping and long rolls Bottom cone wrapping machine with long roller for strands and pretzels max 800 mm long DGUV V3 tested Machine mobile Stainless steel Connection 400V, 16A-CEE plug Used machine overhauled 3 months warranty + spare parts service Option: Feeding device Wrapping from 350 to 1000 grams Service Package Maintenance contract Instruction & Commissioning Leasing & Rental Service With us you will find the right croissant wrapping machine!
2 piece F. 17.3 2 piece F. 17.34 Milling machines with double head (duplex), with counter holder for horizontal milling
Casing-in machine Hunkeler (Joba) Model BBA Year 1990's Working width 350 mm Thickness 1-100 mm (adjustable) Available Direct
Kettenstemmer (chain Mortiser) carpentry: â?¢ handy Kettenstemmer with strong pulling engine â?¢ Adjustable depth stop to 125 mm â?¢ Adjustable RIP fence 25-180 mm â?¢ Chain guide with integrated lubrication â?¢ Housing, handles and base plate made of sturdy die-cast aluminium â?¢ Security Beidhandschalter for the protection of the user â?¢ Including high-quality chain set Technical specifications: â?¢ wattage 1350 Watts â?¢ Idling speed min-1 3,400 â?¢ Maximum mortising depth 100 mm â?¢ Press width 40 mm â?¢ Dimensions 261 x 320 x 382 mm â?¢ Weight 10 kg Scope of delivery: â?¢ power cord 5 m â?¢ RIP fence â?¢ Open end wrench â?¢ Allen key â?¢ Chain set (sword, chain, grea ...
Riveting machine (2 heads) Arno Model 105 Year 1980 Head distance 30 - 450 mm Available direct
Condition: Very good condition Available: Immediately
More information on request Excellence working condition
Collman Buffing / Building / Peeling Machine Ref: RB007 Year 1980’s 50 volts 50 cycles 20kw Manual peeling, buffing, building Good for PCR truck and Light OTR tyres Latest standards
GEKA HYDRACROP 55/S hydraulic ironworker machine was built in 2018 in Spain by MAQUINARIA GEKA S.A. The machine, equipped with 5 work stations, is designed for precision machining of flat bars and angle bars. Each station is controlled by two hydraulic cylinders, which give the possibility to work independently or in parallel on two stations simultaneously. The GEKA HYD 55 S ironworker machine weighs 1390 kg. Technical specifications of the GEKA HYDRACROP 55/S ironworker machine General data - maximum punching force: 55 t - maximum cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - engine power: 5 kW - weight of the GEKA HYDRACROP 55/S machine: 1390 kg Flat bar shearing station - flat bar dimensions: 300 x 15 mm; 200 x 20 mm - blade length: 305 mm - working height: 880 mm Angle bar shearing station - shearing of angle bar at 90°: 12 ...
CANDY RECYCLING AD 2000 made in 2015 for recycling of Rework from hard candy production suitable also for jelly, toffee, lollies, fondant even wrapped products result after recycling: completely transparent and neutral sugar-glucose syrup-water solution consisting of: dissolving machine intermediate/buffer tank, volume 2000 L with platform horizontal rotary drum vacuum filter unit year 2015 very good condition
Modular ice flake production plant with a maximum capacity of 2500 kg/24 h With semi-hermetic compressor With remote air-cooled condenser Stainless steel screw and freezing cylinder (evaporator) Electromechanical control panel Special reinforced alloy icebreaker, which allows for higher pressing force, resulting in a drier quality ice (85% dryness) Long life stainless steel bearings Gearbox current protection, safety clutch between gearbox and pulley Low water level sensor Ice level thermostat Removable stainless steel side panels for easy servicing PS plastic cover Ice chute with extension Reduced height CFC free R-404A refrigerant
Kemper SPL75 Spiral Kneading Machine Spiral, dough crusher and stainless steel boiler incl. dust protection cover 2 clocks, 2 gears, clock for second speed runs with the first watch, so must be adjusted plus the first watch Feed and return of the boiler + pulse button for boiler rotation Machine in bakery condition, must be thoroughly cleaned before use Video about test run and other pictures available
AUTOMATIC EDGE BANDING machine type HOLZ-HER SPRINT 1411 work hours : 380 work meters : 32.000 CE mark : YES volt. 380/50 composition : 1. gluing unit with cartridge and comb nozzle 2. end trimming unit 3. edge trimming unit 4. tilting edge trimming unit 5. glue scraper
Automatic Edge Banding machine type OCMAC BS 21 . second hand composition : - glue pot - edge-trimming unit (2 motors) Kw 2 each one . rpm 12.000 with cabinet with HF converter Hp 5 volt. 380/50
Edge bander type STEFANI BRT UNIVER with trimming unit and automatic feeder for straight, curved and shaped panels . application of melaminic, Pvc, veneer edges, in rolls and strips Technical details: Max panel height mm 60 Edge thickness mm 0,4 - 1,5 Trimming unit 12000 rpm Automatic feeder Overall dimensions: mm 1350 x 1000 x 1150 h Weight kg 480
Mikron WF31D Precision Milling and Drilling Machine Machine with chips and splash guard cabin Equipped with a Heidenhain TNC355 controller Technical Specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shifting step gearbox and Poly-V belts. Vertical spindle can be extended by 90 mm; Conversion from vertical to horizontal machining possible. Ball screws with DC drives allow simultaneous feed movements. Guides are protected against dust, chips and coolant. Specifications Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Perpendicular movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equip ...
GERA Bottle Washing Machine – Arcade GEL 6 RV1-VL 362/110-30 (Year 2010) High-capacity industrial bottle washing machine designed for efficient cleaning of returnable PET and glass bottles in beverage production lines. The GERA Arcade GEL 6 RV1-VL 362/110-30 provides reliable multi-zone washing performance and high throughput, making it ideal for breweries, soft drink producers, and mineral water bottlers. General Information - Manufacturer: GERA - Model: Arcade GEL 6 RV1-VL 362/110-30 - Article Number: 1334 - Year of Manufacture: 2010 - Operating Hours: approx. 35,000 h - Condition: Excellent used condition, regularly serviced Technical Specifications - Production Capacity: approx. 30,000 bottles per hour (1.0 L format) - Control Range: 13,200 – 36,300 bottles per hour - Cell Pitch: 110 mm - Bottle Cells per Row: 30 - Total Bottle Cells: 7,860 Washing System ...
A vertical pillow-pack packaging machine enables a very flexible manufacturing of packaging. Different bag types you can with short set-up and make-ready times through different options with different bag widths and lengths produce. The bag can be made with printed and transparent foil. FEATURE -Modern pillow-pack machine in the optimal price-performance ratio. Stainless steel with safety plexiglass Color touch-display with intuitive operating software -Fast, tool-free bag size change -Simple, intuitive operation -low maintenance APPLICATIONS Gusset bags, sealing bags, pillow bags Granules, food & non-foods, such as chips, rice, coffee, sweets, powders (flour, food supplements, etc.), TK goods, pet food, and much more. TECHNICAL data sample for the VSBM01 Film width: 220-520mm sealing width: 5-10 mm front surface width: 60-190mm Side Surface Width: 40-110mm maximum m ...
Computer Servo Control Universal Testing Standard Spec: Machine Capacity: 5kN . Unit (Selectable) : kg, lb, N, kN . Load Resolution / Accuracy : 1/1,000,000 / within ±0.25% . Load Magnifying Rate: Auto range . Stroke : 1100mm (excluding grips) . Effective Width : 410mm . Test Speed : 0.001 to 1000 mm/min . Speed Accuracy : ±0.5% . Stroke Resolution : 0.00004mm . Sampling Rate : 10,000 times / sec . Motor: AC Servo Motor . Driving system: Multi-groove 50% less in silent and vibration as compre gear (old system) . Power : 1 phase, AC 240V, 15A Features: - High Accuracy - High Performance - Multi-function - Superior Software Program - Automatically Measuring The Elongation - Superior Features - Control: Load, Position and Extension control - Over-load protection, automatic load calibration - Sample failure detector, return function - Manual positioning with tes ...
Casing-in machine Zechini Model Gamma Year 2000 Working width 420 mm Thickness 100 mm (electrical adjustable) Details After order machine shall be completed with new side dams, new glue bin, and new glue adjustment gears Available Direct
Alternative, new box bellows for Trumpf L3030 Siemens -from German production (it is not an original by Trump) -Y-axis (C) -Mapping: Trump ID: 1667805 / 939016 -New part
GARBOLI LPC 500 tube polishing machine was built in 2021 in Italy by BRUSA & GARBOLI. The machine is designed for the precision surface treatment of straight and bent tubes made of, among others, stainless steel and aluminium. The specially designed system of dry grinding, consisting of two opposing abrasive belts, ensures an even surface finish without any distortion, even on larger tubes. On the other hand, daily operation of the machine is facilitated by an intuitive control panel designed for precise setting of the working parameters. The BRUSA & GARBOLI tube grinding machine weighs 455 kg. Technical specifications of the GARBOLI LPC 500 orbital tube polishing machine - maximum tube diameter: 203 mm - minimum tube diameter: 10 mm - minimum tube radius: 225 mm - abrasive belt size (L x W): 1500 x 90 mm - control panel - main motor power: 9.7 kW - power supply: 400 V; 50 Hz ...
New water jet cutting machine Make: aps Type: 3D 5-axis 301508 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -Latest CAD-CAM software -Latest high pressure pump 22 kW -Latest Abrasivausrüstung with cutting head, Abrasivdosierer and storage containers Work area: L: 3000 mm x B: 1500 mm x H: 800 mm Dimensions: L: approx. 5000 mm, B: approx. 3500 mm, H: approx. 3200 mm Z-axis: optional with collision protection Cutting speed: up to 10 m / min. Positioning accuracy: ± 0.1 mm (500 mm travel) Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pres ...
PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM - MODEL 4HCI3-35/30 YEAR 1990 /2025 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fas ...
New water jet cutting machine Manufacturer: aps Type: Jetcut integral 2030 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -New high pressure pump 22 kW -New Abrasivausrüstung cutting head, Abrasivdosierer and reservoir workspace: 2000 mm x 3000 mm Dimensions: L: approx. 4600 mm, B: approx. 2900 mm, H: approx. 1500 mm Z-axis: 180 mm, full servo axis, optionally with collision protection Cutting speed: up to 15 m / min. Positioning accuracy: ± 0.1 mm Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pressure: depending on the used high pressure pu ...
Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3-20 MTA S.p.A. TAEevo Tech 802 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, electronic injectors, buffer tank 678 ltr., built-in P3 circulation pump on the intake side and winter control (condenser pressure control -20°C). Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 79.48 Max. Current (A) 142.2 Starting Current Circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200374246 Ye ...
Key data: 300 , 4
Bandwidth - up to 460 mm Band thickness - 0,5-4 mm Motor drive - 6 kW together with Reel 1.5 T - non-powered
C - bow, Ziehm Exposkop 8000, monitor cart with dual monitor. digital image storage, good condition, also as a possible loaner
maximum number of results exceeded
please refine your search
