131,223 used machines on RESALE, but how to find them? Machine Search
DURMA VN 2006 hydraulic corner notching machine was built in 2016. The machine, equipped with state-of-the-art solutions and reliable components, is designed for machining workpieces made of plain and alloy steel with a maximum thickness of 6 mm. The machining process is performed on a robust, machined table with T-slots for fast and accurate tool positioning. Thanks to the automatic adjustment of the blade, high quality of material notching is achieved with the correct gradation and straightness of the cutting edge. The cutting angle is adjustable from 30° to 140° using knobs located on both sides of the machine. The three upper and four lower hydraulic cylinders in turn ensure that accurate and repeatable notching is achieved. The VN 2006 corner notching machine weighs 950 kg. Technical specifications of the DURMA VN 2006 corner notching machine - maximum workpiece thickness (60 ...
The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air qu ...
The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air qu ...
Column drilling machine Super Condor 30 ATTENTION: Control Panel is missing. Has not been tested. NEED OF REPAIR. All information without guarantee
Muller Martini Perfect Binding Line, Equipped With: Gathering Machine: Muller Martini Type 1571, 12 Stations, Plus Hand Station, Trasnfer Element / Reject Gate Müller Martini 3641, Transfer Element To Binder Müller Martini 3643. 94.02359, MONOSTAR with 18 Clamps, Milling and Notching Station, Hot-Melt Spine and Side Gluing with Pre-Heating Tank, Stream Cover Feeder, Pressing Station, Conveyor Belts to Trimmer. Three Knife Trimmer: Muller Martini Merit 3671 (1998), Muller Martini 3631 (1998) Stacker Delivery, Mechanical Speed: 5,000 Cycles/Hour, Format: Min. 100x140mm, Max. 420x305mm, Book Thickness: Min. 3mm, Max. 60mm, Cover Width (Open): Min. 203mm, Max. 642mm.
Soco systems Model: T10 Case taper Serial: 49692 top and bottom case taper, side grip belts, max box 500mm L x 450mm W x 500H, mobile, 3Ph
Key data: 1025 mm, 1540 , 1090
Machine type: EVP 550 Manufacturer: ERBA Power kW: 4.0 Total volume: 585 lt. Description: The EVP 550 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has a fully automatic PLC process control (optional) and, on request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligat ...
Key data: 2300 mm, 2026 , 1615
Machine type: EVP 1500 Manufacturer: ERBA Power kW: 11 Total volume: 1500 lt. Description: The EVP 1500 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has a fully automatic PLC process control (optional) and, on request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without oblig ...
Material: Stainless steel 1.4301 Drive: 4 KW Weight: 1550 kg Area per deck: 2,6 m² Incl. 2 x ball knocking cleaning / 2 x sieve with mesh size choice: 0.1 5 mm.
Machine type: YE 60 Manufacturer: ERBA Power kW: 0.3 Total volume: 50 lt. Description: The ERBA separation line YE 60 is used to separate workpieces and grinding medium. This can be used as a stand-alone machine or in combination with other machines, such as the ERBA Turbo (centrifugal power system). The separation floor can be changed quickly and easily depending on the requirements. Optionally, a frequency converter can be installed, which enables the infinitely variable adjustment of the motor speed. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. ...
Lawn Sweeper for PTO 540 rpm, working width 180 cm, double Sweeper roller system, hydraulic high dump, electrical. Remote control acting on solenoid valves, ew 1 hydraulic connection required. Tank contents approx. 3 m ³, rear axle 6 x frosted. Drawbar adjustable in height, illumination device com. StVZO. Machine is relatively little used, brushes and Tin in good condition with paint defects inside the tank and signs of use. Incl. operating instructions, parts list, and ABE. Type same Kugelmann KDH 150 (150 cm working width) also available and more with working widths from 90 to 170 cm. -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...
Key data: 350 mm, 1470
Machine type: Turbo 60 Manufacturer: ERBA Power kW: 3.0 Total volume: 60 lt. Description: The ERBA Turbo 60 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 60 is available in dry and wet versions. It can be linked to the separation section listed below. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for ...
AUTOMATIC TENONER machine model BACCI TSG2T working conditions : Excellent second hand machine for production of chairs , sofa' , bedroomes , etc . volt. 380/50 with tool : Yes spindle speed rpm 6000 max. tenon width mm. 115 +2R tenon depth mm. 15 / 50 tenon thickness mm. 0 / 42 tables inclination : Yes cutter rotation motor power Hp 4 cutter revolution motor power Hp 1 net weight kgs. 1050
- Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Threading in steel ST 60 to M 42 - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 60 – 1100 rpm - Right - Counterclockwise rotation - 3 feeds 0.1 / 0.16 / 0.25 mm/rev - Projection 350 mm - Max. distance between drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 630 x 540 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.8 / 3.5 kW - Space requirement approx. W 600 x H 2050 x D 980 mm - Weight approx. 650 kg - with: - Emergency stop button - - Lighting - keyless chuck 1 - 13 mm - Coolant device - Machine vise - various 20 pcs HSS – Twist drill bits 8 – 20 mm
Window slot machine REX with trimming saw and slot milling L x W x H: 200 x 150 x 160 cm Weight approx. 750 kg Built in 1976 The machine is in good condition, ready to use. This machine is available from October 2018. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
x-travel 600 mm y-travel 500 mm z-travel 450 mm Control TNC 415 Heidenhain Main spindle: Speed range - milling 20 - 5,000 rpm Drive power - milling spindle 6 / 9 kW Tool holder SK 40 Quill stroke 90 mm Gear stages 4 swivel +/-90 ° Workbench: Bsi0Cso09Qu Table size 900 x 530 mm T-slots 7 T-slots - spacing 63 mm T-slots - width 14-H7 mm max. table load 400 kg Tool Changer: Number of tool positions 18 pos. Tool holder SK 40 max. tool diameter 85 mm max. tool diameter. with a free neighboring box. 150 mm max. tool length 300 mm max. tool weight 10 kg Tool change time max. 15 sec Feeds: Feed rate - fine adjustment 2 ~ 4000 mm/min Rapid traverse X-axis 6,000 mm/min Rapid traverse Y-axis 6,000 mm/min Rapid traverse Z-axis 5,000 mm/min Total power requirement 15 kW Machine weight approx. 3.6 t Dimensions approx. 3.4 x 3.6 x 2.2 m Tool Milling Machine - Universa ...
Gluing machine for paper Hunkeler Model LAM600 Year 1990 Width 600 mm Available Direct
used
The HKB series swivel machines are used for bending thin sheet metal. Due to their compact design, they fit easily into small workshops and cover a wide range of applications with their segmented upper tool. With an adjustable angle stopper, these swivel machines are also suitable for the production of small batches. Compact and torsion-resistant Segmented upper tool for many bending options Integrated, manual bend compensation Adjustable angle stop for series production Hands free Foot control of the upper bolster clamp Workspace Working length 1270 mm Sheet thickness (max.) – 400 N/mm² 2 mm Dimensions (length x width x height) 1.6 m x 0.9 m x 1.18 m Weight 330 kg Angle range of the bending beam 135°
many moldes available for Husky Glines and Hypets Husky Moog Servo Valve HPN 4952777 Compatible with Later Hypet & Hylectric injection molding machines, Hypets 4.0 & 5.0, Used in working order 6 Months Warranty (1) Piece available
ID3420 Geotec Rotomax XL GTCi year/Baujahr 2012 approx. 10,000 hours/hours 15 t Crawler drilling rig, Flush drilling rig, double-head rig, drilling with protective casing, geothermal energy up to 250 m depth - diameter up to 180 mm, well drilling up to 100 m depth - up to 400 mm diameter, power 168 KW, with 150 m drill pipe (90 mm) and 30 m protective piping (178 mm) Crawler drilling rig, flush drilling rig, double-head rig, drilling with protective casing, geothermal energy up to 250 m depth - diameter up to 180 mm, well drilling up to 100 m depth - up to 400 mm diameter, power 168 KW, with 150 m drill pipe (90 mm) and 30 m protective casing (178 mm)
Code: 0442 Brand: VALTORTA Model: FV/TR Roller coater machine REVERS for rollcoating of basecoats and U.V. top coats Conveyor feed system with auto-centering system to keep the belt in track Working width mm 1300 Working table height from the floor mm 900 Working thickness mm 1/180 1 Rubber covered spreading roll diameter mm 240 1 Steel dosing roll unit n° 1 diameter mm 165 1 Rubber covered spreading roll REVERS unit diameter mm 240 1 Steel dosing roll REVERS unit diameter mm 165 Rubber covered conveyor rolls diameter mm 190 Rubber covered conveyor rolls diameter mm 60 Rubber covered roll motor power Hp 2 Steel roll motor power Hp 1 Rubber covered roll REVERS unit motor power Hp 2 Steel roll REVERS unit motor power Hp 1 Doctor blade REVERS unit motor power Hp 0,5 Feed speed mt/min 6/30 Independent electrical cabinet with easy commands Machine installed on wh ...
Specifications Control Siemens Sinumerik 840 Dsl Main dimensions and travels Face plate diameter 3,500 mm Circumferential diameter (max.) 4,000 mm Workpiece height (max.) 3,000 mm Total height of the machine 7,250 mm Maximum workpiece weight 50,000 kg Table base Y Horizontal table displacement 2,000 mm Crossbar Vertical adjustment of the crossbeam 1,500 mm in 50 steps Crossbeam Support (Right) Horizontal adjustment support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool Stations Crossbeam Support (Left) Horizontal adjustment support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool Changer Main Drive: Main motor power 100 kW Face plate speed range 1-100 rpm. Maximum torque at the face plate 100 ...
Key data: 4000 mm, 5000 mm
Specifications Control SIEMENS SINUMERIK 840 Dsl Main dimensions and travels Face plate diameter 4,000 mm Circumferential diameter (max.) 5,000 mm Workpiece height (max.) 5,000 mm Total height of the machine 9,250 mm Maximum workpiece weight 80,000 kg Table base Y Horizontal table displacement 2,500 mm Crossbar Vertical adjustment of the crossbeam 3,200 mm in 50 steps Crossbeam Support (Right) Horizontal adjustment support - 2740 + 2740 mm Vertical displacement of the chisel slider 1,800 mm Cross-section of the chisel slider 250x210 mm Side Support (Right) Vertical adjustment support -25 + 2170 mm Horizontal displacement of the chisel slider 1,000 mm Cross-section of the chisel slider 250x210 mm Turning diameter max./min. 4,500/2,500 mm Main Drive: Main motor power 100 kW Face plate speed range 0.63 – 63 rpm. Maximum torque at the ...
Many thanks for your interest on our second hand machines, please find follow our offer: Manufacturer : SIG Type : SB horizontal flow-pack YOM : 1988 Package size range : min. 60 x 30 x 5 mm (lxbxh) max. 410 x 180 x 75 mm (lxbxh) Trigger length : between 90 and 470 mm depending on the format range Roll width : up to 590 mm Output : up to 250 pcs./minute; infinitely adjustable Electricity : 220-380 V; 3 ph; 50 Hz supply chain length : ca. 5000 mm different: double foil roll holder automatic film splicer PLC Control date printer good Condition 5m long belt infeed We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked
Machine type: ESA 15 Manufacturer: ERBA Power kW: 3.37 Bdw3H9Emd2R Mud basket volume: 15 lt. Description: The ESA 15 recirculating centrifuge from ERBA (patent no.: 201606464) is a professional stand-alone system for the treatment of process water for mass finishing systems. It has a waste water tank with agitator, as well as a pure water tank and can produce up to 600 litres of fresh water per hour. Dirt particles are separated from the process water with 1500 g force and removed as a solids cake. The programmable logic controller (PLC) with touchscreen makes the condition of the machine particularly simple. The ESA 15 is also very space-saving due to its compact design. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with addi ...
used
Siemens Uroskop Access in gutem technischen und optischen Zustand Baujahr 2005 alle technischen Unterlagen und viel Zubehör
Key data: 490 mm, 1120 , 990
Machine type: EVP 250 Manufacturer: ERBA Power kW: 1.5 Total volume: 250 lt. Description: The EVP 250 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has an electrical control cabinet and can be equipped with a fully automatic PLC process control (optional). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may ...
Key data: 3560 mm, 2466 , 1800
Machine type: EVP 3000 Manufacturer: ERBA Power kW: 15 Total volume: 3000 lt. Description: The EVP 3000 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has an electrical control cabinet and can be equipped with a fully automatic PLC process control (optional). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size m ...
Kneader UC 80 AL with an extendable tray. Basic refurbished dough quantity: approx. 130 kg
Key data: 115 mm, 1540
Machine type: Turbo 14 Manufacturer: ERBA Power kW: 0.55 Total volume: 14 lt. Description: The ERBA Turbo 14 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces in a short process time. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 14 is available in dry and wet versions. It can be linked to a separation section. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will ...
Type: 751 carton sealing machine top Type: 651 carton sealing machine below Machine is to the close of folding cartons with tape (top/bottom).
Material: Stainless steel 1.4301 Drive: 5.5 KW Weight: 2050 kg Area per deck: 3.65 m² 2 x ball tap cleaning 2 x sieve with mesh size choice: 0.1-5 mm.
Mori seiki MT 2000 multitasking lathe :::TECHNICAL SPECIFICATIONS::: CNC model: Mori Seiki - CNC version: MSC 501 - Spindle nose: ASA 6 - Spindle power: 22Kw Number of main spindle speeds: 6000 - Turning diameter: 540mm - Bar passage: 65mm - Turning length: 1020mm Number of tools: 60 Tool holder: CAPTO C6 Spindle power: 18Kw Number of spindle speeds: 8000 X-axis travel: 565mm Y-axis travel: +-80mm Z-axis travel: 1077mm Swivel B-axis travel: + - 120 ° degrees Fast feeds for linear axes X Y Z: 24m/min High refrigerant pressure: yes Pressure value: 80bar External tank system with filter: yes Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 155mm First turret Z-axis travel: 1067mm Sub-spindle: yes Spindle nose: ASA 5 Number of counter ...
SOS block bottom bag machine 1 ply photo cell for preprinted paper 4 colour tail end printer Bag width: 5-12 cm Tube length: 12-34 cm Bottom width: 3-7,5 cm
SOS block bottom bag machine 2 plies 4 colour tail end printer photo cell for preprinted paper Bag width: 12-26 cm Tube length: 25-47 cm Bottom width: 4-12 cm
Key data: 400 mm, 1100 mm, 3500 1/min
Machine Details Stock-No. 1105-04040 Type of machine CNC Lathe Make NAKAMURA Type SC 300 L Year of manufacture 1998 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time by arrangement from the location Freight basis EX WORK Price Technical details turning diameter 350 mm turning length 1150 mm control FANUC 21 t turning diameter over slide 300 mm turning speeds 3500 rpm rapid traverse 20/25 (X,Z) m/min power capacity 22 kW Additional information NICE MACHINE TURNING LENG 1150 CNC FANUC 18 T WITH LIVE TOOLS ANS C AXIS CHIP CONVOYER HYDRAULICK STEADY SMW Technical details and information subject to amendments and errors. 2024 Created with ModulMWS by LogoTech oHG
1 piece flat grinding machine COSMOS E 7040 NC grinding range 700x400x350mm electric magnetic clamping plate 700x400mm single set-up, fixed for straight-straightering with compensation Programmable display 4.7 . . . . -level grinding spindle drive Universal paper strip filter; as good as new, ready for use
MITRE Assembly typesetting machine with high frequency Miter cut length 100 mm for the gluing of frame parts with white glue Various machines in stock
Fully functional used CNC milling machine Deckel Maho DMU 60 with rotary table Built in 1999 Heidenhain Control We would like to point out that this machine is in excellent technical and well-maintained condition for its age (due to the IATF certification). Regular maintenance is already required on the basis of the certification and the machine therefore works 100% perfectly. The machine is still energized and can be viewed and tested at any time. All maintenance logs are in place. The machine will have to leave the hall in the first quarter of 2025. This means that the machine could remain energized until mid-March 2025 to demonstrate it under power. Of course, the machine would also be available immediately. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your answer and interest in adv ...
Key data: 135 mm, 1550
Machine type: Turbo 20 Manufacturer: ERBA Power kW: 1.1 Total volume: 20 lt. Description: The ERBA Turbo 20 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces in a short process time. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 20 is available in dry and wet versions. It can be linked to a separation section. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will ...
to the composed of angles by means of hot-melt glue to a Miter cut length of 100 mm
Key data: 220 mm, 1550
Machine type: Turbo 35 Manufacturer: ERBA Power kW: 1.5 Total volume: 35 lt. Description: The ERBA Turbo 35 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 35 is available in dry and wet versions. It can be linked to the separation section listed below. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will be happy ...
Key data: 270 mm
Machine type: YE 200 Manufacturer: ERBA Power kW: 2 x 0.3 Total volume: 200 lt. Description: The ERBA YE 200 separation line is used to separate workpieces and grinding medium. Two motors provide the necessary movement of the screen. The YE 200 can be used as a stand-alone machine or in combination with other machines, such as the ERBA Turbo (centrifugal power system). The separation floor can be changed quickly and easily depending on the requirements. Optionally, a frequency converter can be installed, which enables the infinitely variable adjustment of the motor speed. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to ...
Turbo systems Model: Heat sealer pot sealer stainless frame, currently set for 32 mini pots, 30mm diameter x 25mm depth, previously used for Knoss stock pots, adjustable temp controls, Mitsubishi Go T1000 PLC
Capping machine for Tetra Pak line year: 2008
LVD Siena strippit 1212 punching machine was built in 2005 in Belgium by LVD Group NV. Designed for machining steel and aluminium sheets, the machine is an excellent choice for both unit and batch production. Reliable components with excellent performance, combined with a compact design based on a one-piece frame, ensure that the SIENA 20 1212 punching machine delivers excellent precision and machining quality for many years of use. The capacious, 27-station turret with 3 auto-index stations and MultiTool support offers a wide variety of machining options and a high level of flexibility. Precision tools punch metal sheets with a force of 20 tonnes on a large brush table, which protects the surface of the workpiece from scratches and scrapes, while increasing the quality of machining. All of this is completed by the GE FANUC CNC control with its unique Smart Stroke function for automat ...
Machine Details Stock number 1105-04042 Machine Type: Surface Grinding Machine Make JACOBSEN Type 1432 Year of construction 1992 Condition Conventional control type Storage location HAGUENAU FRANCE Country of origin Delivery time at short notice - by arrangement. Freight base delivery from site. Price Technical details Grinding length 900 mm Grinding width 410 mm Travel - x 900 mm Travel - y 410 mm Travel - z 300 mm Machine weight approx. 2700 kg Information Distance table - spindle center: 135-575 mm Table speed X: 30-30000 mm/min. Table speed Y: 4-3750 mm/min. Table speed Z: 4-4000 mm/min. Max. grinding wheel dimension: 300x50x76.2 mm Drive power grinding spindle: 4.7 kW MAGNETIC PLATE BRAILLON 800 X 400 MM 5 GRINDING FLANGES
Machine Type: CNC Lathe Manufacturer: GILDEMEISTER Type CTX 500 S2 Year of construction 1998 Control CNC Pilot Heidenhain Country of origin Germany Delivery time by arrangement Freight base from location Technical details Turning diameter max. 445 mm Turning length 1,000 mm Control CNC Pilot Heidenhain Circumferential diameter 680 mm Main spindle: Speed range – main spindle 18 - 3,600 rpm/-1 Drive power – main spindle 23 kW Max. torque 650 Nm Spindle nose 220h5 Chuck diameter 315 / 400 Spindle bearing diameter 140 mm Spindle bore 107 mm Tool turret: Number of tool positions 12 pos. Tool holder 40 DIN69880 Travel: x-travel 320 mm z-travel 1,097 mm Tailstock: Quill stroke 120 mm Tailstock mount MK 5 Quill pressure 14 kN Feeds: Rapid traverse X : 24 / Z : 30 m/min Feed force X: 8 / Z: 15 kN Total power requirement 58 kVA Machine weight approx ...
maximum number of results exceeded
please refine your search
