vacuum pack used for sale

The pictured cutter is sold by MADO of the type Garant MSK760 H II with a volume of 35 litres. The cutter is made entirely of stainless steel, it has a 6 mm cutter head with an additional spare blade set and comes with an operating manual. The cutter has the following technical data: Bowl volume: 35 litres Number of knives: 6 Speed: 1750-3500 rpm Bowl speed: 12/24 rpm Knife shaft power: 9/11kW Voltage: 400V Fuse: 32A (slow-blow) Dimensions: 1240x890x1130H (1240x1260x1740H with lid open) Footprint: 1040x550mm Weight: 430kg Keys for the cutter head and documentation are part of the machine The machine runs neatly and smoothly, video of the test run available Only the noise protection cover has a crack, but this was professionally glued by the previous owner.

Cutter Capacity: 25 liters Voltage: 380V / 50Hz / 3 phase Power: 1.5kW Speed: 1000-2000 rotating/min Dimensions: 85x67x70cm Packing size: 93x78x71cm With a temperature probe and the net

PVS natural casing welding devices replace the knotting of the sausage ends or the closure of the sausages with a clip The system is suitable for natural casings, sheep casings and pig casings. The advantage to conventional applications is that there is no need to remove knots or clips before packing

Height 1550 mm Width 2950 mm Length 1750 mm Weight 4100 kg Capacity 200 l Electrical Supply: 400V 50Hz 3N Total power 78 kW Main Material Stainless Steel, Acid Resistant Cutter type Vacuum bowl cutter Construction of the cutter bowl Stainless steel, acid-resistant Number of knives on the head 8 pcs. Vacuum cutter. Additional functions for heating or cooling the bowl

M. No.: 070068681 Equipment / Additional information: Hz: 50/60 V250/300 m3/h P 100 hPa (0.1 bar)

M. No.: 43954 Equipment / Additional information: Vacuum: 20 mbar Motor Oil: Type SAE 30 Qt.: 6 Ltr.

Handtmann VF 50 incl. turning device and complete accessories

Extended twisting gear for Vemag filling machine Robby or DP, to put a metal detector in between, functional, smooth-running, very good used condition.

Extended twisting gear for Vemag filling machine Robby or DP, to put a metal detector in between, older model, functional, smooth-running

Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar

Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar

VALOREL Stainless Steel Vessel 620 Ltr. with propeller stirrer, allowed pressure 2,5/-1bar, max. temp 150C , on top there is a inlet 50mm for clamp connection, down outlet valve diameter 2"

1 pump, made by Gardner Denver, built in 2019, 2 pump, made by Rietschle, built in 2002, 0.5 mbar (abs.), 300 m³/h, 5,5 kW, on 2 stainless steel frames,

Kilia TK20 Table Cutter 20 litre solid stainless steel bowl 2 courses 6 mm cutter head Spare blade set and fork locks included 400V Stainless steel housing smooth and smooth running, video of test run available comes from a gastronomic business in which meat loaf was made with it

automatically, a closing station in rotation. , Drive: 1.5 kW, Generation of the vacuum by means of a vacuum pump, with closure sorting, with device for TO 53, TO 66, TO 82, format parts for glasses with diameter approx: 60, 64, 70, 78, 90 and 102 mm (65ml, 125ml, 275ml and 1,062ml glasses),, Output: up to a maximum of 1,200 glasses per hour.

Dimensions (L/W/H): 2920x980x1450 mm Weight: 1500 kg Total power requirement: 11,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vacuum pump Becker T 3.40 DSK; cleaned and tested; 1420 umin.; Suction volume 40m3h.; suction pressure 600 mbar; Compaction pressure 600 mbar. Vacuum pump Becker T 3.40 DSK; cleaned and checked; 1420 umin.; suction volume 40m3h.; suction pressure 600 mbar; Compression pressure 600 mbar.

Stephan UM/SK 60 E Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. Mounted on a stainless steel frame. The bowl is equiped with a double jacket for heating/cooling on the jacket, 2x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, cutting blade, maximum working pressure in the bowl -1/- bar (protected with overpressure valve), maximum temperature in the bowl 95 °C, maximum temperature in the jacket 95 °C, vacuum connection on the bowl, dearation connection on the bowl, infeed connection on the lid with a hopper with a pneumatic valve for adding powders, mounted on the lid a scraper agitator for the wall, electric driven (0,37 kW - n2: 39 rpm), 1 manual tightening clamp, pneumatic outfeed valve for the product, so not needed to tilt the bowl  ...

Two like-new and partly originally packaged large-format vacuum angle valves Leybold are available. Deflection: 90°, nominal diameter: 800mm, max. operating pressure: 7bar. Documentation available. An on-site inspection is possible.

Spare parts for different Stephan UMM/SK - TC/SK Universal machines. The lot of spare parts is existing out of:, - 4x Springs., - Several steam injection nozzles and components., - Temperature indicator., - Knife nut., - Several scraper blades., - Gummies., - 9x Used Stephan 80 knifes., - 2 New Stephan 80 knifes., - 2x Used Stephan 25 or 40 knifes., - 4x Manual clamps for fixing the lid., - Vacuum chamber., - Filler bushings Stephan TC/SK 600., - Part of a pneumatic outfeed valve., - 4x Sieve plates., Type of Machine: Universal machine

Vemag HP30E Vacuum Filler  Complete with loader

Kappel DSH2/12V Vacuum Suction Cups Plate Vacuum Cleaner Glass Metal For lifting up to approx. 1500kg!

Used Handtmann twisting and unscrewing line type PVLH 228 Plus. Line for sausages in natural intestines, collagen and artificial casings. • PLUS NEWS AND OPTIONS: Natural bowel pusher, minimal setup time, easy operation and much more... • STEP-BY-STEP PROCESS: portioning – twisting – twisting with butterflies – Equal portion length – hanging • TOP QUALITY PRODUCT thanks to gentle twisting with butterflies and a twisting unit • LARGE VARIETY OF PRODUCTS thanks to a wide range of applications and calibers and different stations butterflies spinning • FLEXIBILITY due to a variety of suspension module options: grouping, number of loops and distances between hooks, empty or full portions • HIGH PERFORMANCE thanks to rotating twin-funnel head • COST-EFFECTIVE by changing the cover in less than 2 seconds • SIGNIFICANT COST REDUCTION due to the highest w ...

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners, polyurethane hose, suction hose, hose, vacuum cleaner hose, spiral hose, suction hose -Extraction hose: with connecting sleeves -Length: 8 m -Diameter: Ø 50 mm -Number: 4x suction hose available -Price: per piece -Weight: 4.1 kg/piece

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners, polyurethane hose, suction hose, hose, vacuum cleaner hose, spiral hose, suction hose -Manufacturer: Nilfisk, Conductive Polyurethane Hose -Type: Z7 22370 -Length: 3 m -Diameter: Ø 70 mm -Number: 6x suction hose available -Price: per piece -Weight: 3.1 kg/piece

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, vacuum pump type U 2.70 SB -Drive: 1.5 kW -Volume flow rate: 70 m³/h -Max pressure: 20 mbar -Speed: 1420 rpm -Number: 2 pumps available -Price: per piece -Dimensions: 640/380/H440 mm / 760/360/H425 mm -Weight: 60 kg/unit

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Transfer: in the current condition as seen -Vacuum suction cup: with damage -Version: with vacuum suction cup, equipped with directional valve and induction knife for the stroke -Stroke: 70 mm -Sucker: Ø 125 mm -Piston rod: 20 mm -Total length: 420 mm -Total length extended: 490 mm -Number: 31 pieces available -Price per piece -Dimensions: 420/140/120 mm -Weight: 4 kg/piece

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners, wet-dry vacuum cleaners, liquid and chip vacuum cleaners, water vacuum cleaners, wet vacuum cleaners -Manufacturer: Numatic, industrial vacuum cleaner type WVD 900-2 -Connection: 230 volts -Power: 2400 W -Number: 1x industrial vacuum cleaners available -Dimensions: 740/485/H880 mm -Weight: 23 kg

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums -Manufacturer: Nilfisk, Industrial vacuum cleaner type GB 726 -Connection: 380-415 V 50 Hz -Power: 1.9 kW -Number: 3x industrial vacuum cleaners available -Price: per piece -Dimensions: 820/600/H1150 mm -Weight: 87 kg/unit

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners -Manufacturer: Debus, industrial vacuum cleaner type DDS 605 7 31 M -Operating pressure: 6 bar -Air requirement: 2.6 m³/h -Suction performance: 7.8 m³/h -Dust container: volume approx. 110 liters -Dimensions of container total: Ø 640 x 730 mm -Dimension aggregate: 1330/620/H1360 mm -Total weight: 153 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, vacuum pump type VT 4.25 -Drive: AEG 0.75 kW / 1420 rpm -Volume flow rate: 25 m³/h -Suction pressure: -850 mbar -Quantity: 1 pump available -Dimensions: 490/250/H300 mm -Weight: 31 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, vacuum pump type VT 3.16 -Drive: 0.75 kW / 1420 rpm -Voltage 380 volts -Volume flow rate: 16 m³/h -Suction pressure: -850 mbar -Dimensions: 430/220/H280 mm -Weight: 23 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, vacuum unit -Manufacturer: Fezer, Vacufix CL15 V vacuum pump with storage container -Suction capacity: 15 m³/h / 1400 rpm -Drive: VEM 0.75 kW -Dimensions: 1040/460/H750 mm -Weight: approx. 90 kg

Vacuum lifter, vacuum lifting device, vacuum suction cup, plate lifter -Manufacturer: Rice, -Description: Vacuum lifting device without control -Previous use: Handling of solar panels -Condition: very good, only been in use for a few months -Vacuum pump: Becker Vt 4.16 0.55 kw -Steering: -Suction cups: Ø 25 mm -Lifting device: travel Z= 1780 mm -Individual components: see photos -Dimensions: 3000/850/H2480 mm -Total weight: 580 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type DVT 2.140 -Drive: AEG 5.5 kW / 1440 rpm -Volume flow rate: 140 m³/h -Suction pressure: -500 mbar -Final compression pressure: 500 mbar -Dimensions: 980/380/H520 mm -Weight: 146 kg

Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank -Manufacturer: Zeidler & Uhl, vacuum container standing, galvanized -Contents: 455 L -Operating pressure: -0.6 bar / max. 16 bar -Accessories: including attachments see photos -Number: 2x containers available -Price: per piece -Dimensions: 860/650/H1610 mm -Weight: 374 kg/piece

Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank -Manufacturer: Zeidler & Uhl, pressure vessel vacuum vessel standing -Contents: 455 L -Operating pressure: max. 13 bar -Accessories: including attachments see photos -Quantity: 1x container available -Dimensions: 1020/755/H1900 mm -Weight: 518 kg/piece

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, rotary vane pump -Manufacturer: Ilmvac, Vacuum pump rotary vane pump -Type: 302313-02 P 12 D -Drive: ATB 0.55 kW / 1320 rpm -Suction capacity: 11.0 m³/h -Dimensions: 480/220/H265 mm -Weight: 28.4 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum surface for suctioning the material to be conveyed -Belt width: 150 mm -Conveyor length: 770 mm -Drive shaft: Ø 30 x 150 mm Dimensions: see photos / technical drawing -Dimensions: 875/400/H300 mm -Weight: 60 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum part area for the suction of the material to be conveyed -Belt width: 150 mm -Conveyor length: 635 mm -Drive shaft: Ø 30 x 150 mm -Dimensions: see photos / technical drawing -Dimensions: 530/400/H350 mm -Weight: 43 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum surface for suctioning the material to be conveyed -Feed belts: 3 pieces, length 1840 x 30 mm -Drive shaft: Ø 30 x 100 mm -Individual components: see photos -Dimensions: 1840/570/H285 mm -Weight: 129 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum surface for suctioning the material to be conveyed -Belt width: 100 mm -Conveyor length: 650 mm -Drive shaft: Ø 30 x 100 mm -Key width: 8 mm -Dimensions: 650/520/H250 mm -Weight: 51 kg

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums, wet/dry vacuums, liquid and chip vacuums, water vacuums, wet vacuums -Manufacturer: cleancraft, industrial vacuum cleaner type wetCAT 131 IRH -Connection: 230 volts -Power: 2.4 kW -Dimensions: 500/470/H1100 mm -Weight: 10 kg

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums, wet/dry vacuums, liquid and chip vacuums, water vacuums, wet vacuums -Manufacturer: Wap, Industrial vacuum cleaner, 2-motor wet/dry vacuum cleaner -Type: turbo M2 -Connection: 220...240 volts -Power: 1400...1600 W -Dimensions: 700/600/H1070 mm -Weight: 30 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, rotary vane pump -Manufacturer: Thomas, Rotary vane vacuum pump -Type: VTE 10 27740125 -Drive: 0.35 kW / 2700 rpm -Vacuum: 150 mbar -Flow rate: 10 m³/h -Dimensions: 265/160/H155 mm -Weight: 10.2 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 291 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 288 kg

VACUUM STUFFER, VEMAG ROBBY1, TYPE:134 Technical description: Serial number: 134 0454 Power supply: 220-380 V/ 50-60 Hz, 5.1 Kw Approx. weight: 425 Kg

Vacuum Filling Machine/Sausage Filling Machine/Vacuum Stuffer Manufacturer: REX DÜKER Type: RVF 327 Fully electronically controlled filling and portioning machine, suitable for all types of sausage for straight filling, portioning and twisting of all types of casings. Particularly gentle sausage meat filling with a clear filling pattern. Equipment: 100 litre filling volume Funnel divisible 60/40 L Machine solid stainless steel Speed, speed and break length infinitely selectable Level indicator, piece counter, unit shutdown Portioning range 5 – 10,000 g Portioning speed up to 700 portions/min. Clipper connector on the back Max. filling pressure: 40 bar Three-phase current 400 volts, 50 Hz, 3 phases Program memory for 200 filling programs Unique hygienic design Modern drive concept Minimal energy consumption 12" touch screen control Extremely quiet and qui ...

BUCHI Syncore Q-101 platform + KNF vacuum pump + V-850 vacuum controller Model: Büchi Analyst Q-101 Vibration frequency: 0 - 300 min⁻¹ Heat output: 1500 W Temperature range: Up to 100 °C W×D: 480×487 mm Included: Polyvap R-12 Rack (120ml) A condensing unit and flask A KNF vacuum pump A Buchi V-850 vacuum controller Traces of rust in the bottom of the heating element Equipment tested