142,470 used machines on RESALE, but how to find them? Machine Search
Nominal pumping speed: 505m³/h (50Hz) / 606m³/h (60Hz) Max. pressure difference: 80mbar (50/60Hz) Intake Flange: DN63 ISO-K Outlet Flange: DN63 ISO-K Integral leak rate: 1x10-5mbar·l/s Noise level: 63dB(A) Air-cooled Degree of protection: IP20 Resources: PFPE Motor: Emod VUF112/2-110, 3~, heat class F, S1, PTC/NC 1x140°C Motor data 50Hz: 2.2kW, 2900min-1, 9.0/5.2A, 230/400V triangle/star, cos φ 0.80 Motor data 60Hz: 2.4kW, 3480min-1, 10.0/5.8A, 265/460V triangle/star, cos φ 0.84 Alternative circuit 200V: 1.6kW, 7.8A (50Hz 200V / 60Hz 200/208V) Ambient temperature: 12-40°C Weight: 135kg Auction-ID: A7-52036-57
Nominal pumping speed: 26m³/h (50Hz) / 31m³/h (60Hz) Pumping speed: 22.5m³/h (50Hz) / 25m³/h (60Hz) Final partial pressure without gas ballast: ≤0.5mbar Final total pressure with gas ballast: ≤0.8mbar Water vapor compatibility: 10mbar Max. water vapor capacity: 85g/h (50Hz) / 100g/h (60Hz) Sound pressure level: 64dB(A) (50Hz) / 67dB(A) (60Hz) Leak rate: 1x10-3mbar l/s Intake connection: G3/4 (reduction to G1/2) Exhaust connection: G3/4 Oil according to nameplate: mineral oil ISO VG32 (Leybold GS32), capacity 0.5l Integrated check valve (anti-suck-back) in the intake flange Motor: Hanning D8G2-8-067, three-phase motor, 0.9/1.1kW, 2830/3400min-1, IP55, insulation class F Electrical data according to engine shield: Triangle 200-240V / Star 346-415V 50Hz, Triangle 200-277V / Star 346-480V 60Hz, 4.0/2.3A / 4.5/2.6A, cos φ 0.83/0.84 Weight according to nameplate: 27kg Accessories: A ...
Max. pumping speed: 630m³/h (50/60Hz) Total final pressure: ≤0.01mbar Motor power: 15kW Rated Speed: 2930min-1 (50Hz) Rated Current: 28A (400V) / 56A (200V) COS φ: 0.89 Motor protection class: IP55 Insulation class: F Operating mode: S1 (continuous operation) Connection flanges suction and discharge side: DN100 (EN 1092-2 PN6, compatible PN10, ISO-K via collar flange) Permissible Exhaust gas back pressure: +200/-50mbar compared to atmosphere Max. permissible Suction temperature: 100°C Water vapor compatibility (with gas ballast): 40mbar Water vapor capacity: 14kg/h Noise level: ≤72dB(A) Permissible Ambient temperature: 10-40°C Air-cooled Oil type/filling: LVO 210, 15l ATEX marking according to the nameplate: II (inside) 3G IIC T3 (160°C) X, 10°C small Ta less than 40°C Pump protection class: IP55 Weight: 530kg Accessories: Leybold exhaust silencer, Prod.-No. 119001 (volume 3 ...
Nominal pumping speed: 95/110m³/h (50/60Hz) Ultimate pressure: 5x10-2/2x10-2mbar (50/60Hz) Power consumption at ultimate pressure: 1.3/1.5kW (50/60Hz) Gas inlet/outlet: DN50/DN40 Cooling water flow: 2.3-3l/min, cooling water connection IN/OUT with quick couplings Sound pressure level: less than 65dB(A) Multistage Roots Pump, Dry Running Certification: SEMI S2, UL 61010 Electrical data according to the nameplate: 380-480V, 3 phases/4 wires, 50/60Hz, 10A, SCCR 11kA, full load current 10A (200-230V triangle) or 5A (380-480V star), circuit diagram S9595-5 Mains connection via Harting connectors with main switch N2 purge gas connection with pressure regulator Interfaces: Sub-D connector (remote control/accessory J2-J8), RJ45, HHR connector for front hand control unit Emergency stop buttons and status LEDs (Power, Running, Warning, Alarm) Chassis with swivel castors and adjustable feet Weight ...
Nominal pumping speed: 3000m³/h (60Hz) Ultimate pressure: 4x10-3mbar (60Hz) Final pressure with 50 SLM purge gas: 9x10-3mbar (60Hz) Power consumption at ultimate pressure: 2.7kW (60Hz) Cooling water flow: 2.5-5l/min Sound pressure level: less than 72dB(A) Suction Flange: DN160 ISO-K Outlet Flange: DN40 ISO-KF Water-cooled, coolant connections IN/OUT with quick couplings Nitrogen purge gas connection (N2) Max. Continuous Inlet Gas Flow: 100slm Construction: multi-stage dry pump with attached roots pump type DSB3000 (P/N 125584), frequency converter Yaskawa V1000 Interfaces: J1-J8 (Sub-D, RJ45), connection HHR for handheld control unit Lubricant Gear: Fomblin (according to sticker) Electrical data according to nameplate: 380-480V star (Y) 21A or 200-230V triangle 33A, 3-phase/4-wire, 50/60Hz Weight: 800kg Accessories: Pfeiffer Vacuum P/N 125540 (S/N NRX1718019) hand control unit with sp ...
Max. pumping speed: 630m³/h Total final pressure: ≤0.01mbar Motor power: 15kW Rated Speed: 2930min-1 (50Hz) Rated Current: 28A (400V) / 56A (200V) COS φ: 0.89 Degree of protection: IP55 Insulation class: F Cooling: Water (version F) Cooling water: Pmin 2bar, Pmax 16bar, Vmax 12l/min, Tmax 35°C Connection flanges suction and discharge side: DN100 (EN 1092-2 PN6, compatible PN10, ISO-K via collar flange) Permissible Exhaust gas back pressure: +200/-50mbar compared to atmosphere Max. permissible Suction temperature: 100°C Water vapor compatibility (with gas ballast): 40mbar Water vapor capacity: 14kg/h Noise level: ≤72dB(A) Permissible Ambient temperature: 10-40°C Oil type/filling: LVO 210, 15l Standard: EN 1012-2 Weight: 530kg Auction-ID: A7-52036-115
Max. pumping speed: 630m³/h (50/60Hz) Total final pressure: ≤0.01mbar Motor power: 15kW Rated Speed: 2930min-1 (50Hz) Rated Current: 28A (400V) / 56A (200V) COS φ: 0.89 Motor protection class: IP55 Insulation class: F Operating mode: S1 (continuous operation) Connection flanges suction and discharge side: DN100 (EN 1092-2 PN6, compatible PN10, ISO-K via collar flange) Permissible Exhaust gas back pressure: +200/-50mbar compared to atmosphere Max. permissible Suction temperature: 100°C Water vapor compatibility (with gas ballast): 40mbar Water vapor capacity: 14kg/h Noise level: ≤72dB(A) Permissible Ambient temperature: 10-40°C Air-cooled Oil type/filling: LVO 210, 15l ATEX marking according to the nameplate: II (inside) 3G IIC T3 (160°C) X, 10°C small Ta less than 40°C Pump protection class: IP55 Weight: 530kg Accessories: Leybold Exhaust Silencer, Prod.-No. 119001 (volume 3 ...
Peak pumping speed: 100m³/h Ultimate pressure: 6.6x10-3mbar Power consumption at ultimate pressure: 1.6kW Power consumption no-load: 0.5-1.0kW Suction Flange: DN50 ISO-KF Exhaust flange: DN25 ISO-KF Water-cooled, cooling water connection 1/4 NPT quick coupling Cooling water requirement: min. 100l/h Max. cooling water pressure: 7bar (101psi) Noise level: 55dB(A) Interfaces: SPI, RS232/485 Dry Running Multistage Roots Pump Weight: 100kg Mains connection according to the manufacturer either 200-208V or 380-400V, 3-phase, 50/60Hz Version Ed. V3.7 Accessories: Chassis with castors and pull handle. Auction-ID: A7-52036-46
Max. pumping speed: 630m³/h (50/60Hz) Total final pressure: ≤0.01mbar Motor power: 15kW Rated Speed: 2930min-1 (50Hz) Rated Current: 28A (400V) / 56A (200V) COS φ: 0.89 Motor protection class: IP55 Insulation class: F Operating mode: S1 (continuous operation) Connection flanges suction and discharge side: DN100 (EN 1092-2 PN6, compatible PN10, ISO-K via collar flange) Permissible Exhaust gas back pressure: +200/-50mbar compared to atmosphere Max. permissible Suction temperature: 100°C Water vapor compatibility (with gas ballast): 40mbar Water vapor capacity: 14kg/h Noise level: ≤72dB(A) Permissible Ambient temperature: 10-40°C Air-cooled Oil type/filling: LVO 210, 15l ATEX marking according to the nameplate: II (inside) 3G IIC T3 (160°C) X, 10°C small Ta less than 40°C Pump protection class: IP55 Weight: 530kg Accessories: Compressed air maintenance unit with shut-off valve ...
Peak pumping speed: 100m³/h Ultimate pressure: 6.6x10-3mbar Power consumption at ultimate pressure: 1.6kW Power consumption no-load: 0.5-1.0kW Suction Flange: DN50 ISO-KF Exhaust flange: DN25 ISO-KF Water-cooled, cooling water connection 1/4 NPT quick coupling Cooling water requirement: min. 100l/h Max. cooling water pressure: 7bar (101psi) Noise level: 55dB(A) Interfaces: SPI, RS232/485 Dry Running Multistage Roots Pump Weight: 100kg Mains connection according to the manufacturer either 200-208V or 380-400V, 3-phase, 50/60Hz Version Ed. V3.7 Accessories: Chassis with castors and pull handle. Auction-ID: A7-52036-49
Professional wet and dry vacuum cleaner, 80 liters 3000 watt, 3 motors incl. accessories, unused in box Auction-ID: A1-40422-223
Used line for packaging of powdery materials in plastic buckets from 2.5 kg to 10 kg. Semi-automatic line of packing and transporting the dispenser weight The line consists of: Two unloading of big bags Oblique conveyor The buffer tank Two batchers Stacking conveyor The set of the transporters with the balance cruise control, feeder lids and closing buckets, made as part of the line for packing powdery materials. The line consists of: Conveyor separator Cruising verified checkweigher Discriminator transporter odstawiaj?cym Conveyor feeder lids Crimper Stacking Conveyor Appetizer - welding machine for bags The checkweigher DWT / xx Technical data: Supply voltage - Uz = 230V Isaiah znamionowy- current = 2-5A (depending on version) Mains frequency - f = 50 Hz overcurrent - F = 10A recommended network layout -TNS Insulation class - I New 2010
Cat.-Nr. 10-1460 in a very good condition Tecnical Details: Production Capacity: 40 boxes/minute Year of Construction: 2008 6 Cups/Tray = 240 Cups/Minute = 14.400 Cups/h each Cup 125 g Measurements: Packing Sizes – LxWxH: 698,5x168,0x1,5 mm Lid – LxDxH: 95,5x95,5x9,0 mm Cup – DxH: 92,5x42,0 mm Machine Measurements: LxWxH: 7500x7400x3000 mm Weight: approx. 6800 kg Operating Instructions available Original Price: Euro 655.000,00 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
We have large stock of now OEM-obsolete used mechanical spare parts and electric / electronic parts for KHS, Kisters and ZVT tray- and shrinkpacking machines. Including AEG DPW 101/102, Kisters PC09 / Kisters PC20 / Kisters PC30 / Kisters PC40, and Indramat servo drives and controllers, Mayr Primo servo controllers. Details upon request. MAC 71C-0-JS-4-C/95-A-0/WI504LV/S001 MAC 71C-0-JS-4-C/95-A-0/WI504LX/S001 MAC 71C-0-JS-4-C/95-A-1/WI504LV/S001 MAC 71C-0-JS-4-C/95-A-1/WI504LX/S001 MAC112B-0-GD-4-C/180-A-0/WI504LV/S011 MAC112B-0-GD-4-C/180-A-0/WI504LX/S011 Mayr Primo 2 + am 1 type P22.004.0 Mayr Primo Compact type P21.004.0 TR Electronic AE100S / HE100S / CS100S Bosch Rexroth PPC controllers including PPC-R02.2N-N-NN-P2-NN-FW, PPC-R02.2N-N-V2-NN-NN-FW and PPC-R22.1. For most of these units we can also provide FW up- / down-load / copy service. (including on-site).
used
CLEANING BANK: BILLET SIZE: DIA. 160 MM x 9.15 M, ROTATION ANGLE: 90°, STACKING & PACKING DEVICE: BILLET SIZE: SQUARE: 50-160 MM; LENGTH: 2.5 - 9.0 M,
Hydraulic pump 250 BAR 1, 1kW three phase motor, 3ccm/& 8 l container with valves and tray, ready for use. Info under 0170 / 2204056 Mail to fa.raupp@t-online
Verpackungskodierer Manufacturer: Willett Type: 3170 For the product eco-labelling, coding of packaging and cardboard boxes. In good condition!
CAM automatic bundling wrapping machine G60 is a new concept machine, designed to carry out bundling and complete wrapping of parallelepiped shaped products, at very high speed, using heat-sealable plastic film and, upon request, Kraft paper. It maintains ample flexibility of employment, guaranteeing high performance and reliability. The completely automatic working cycle, requires the operator only for wrapping material reel change. This operation is quicker thanks to the rapid film replacement device. The second reel shaft is supplied standard with the machine. Pre-arranged for easy and rapid change-over, this machine is extremely versatile. All adjustment facilities have been arranged on the operator's side, while structural elements, which limit accessibility to the product handling, have been eliminated. The machine basement enables complete separation of product handling area ...
Neri/Marchesini/Garvens/Multipack labelling & packing line for round plastic bottles consisting of: Bottle infeed table, Neri SL 400 self-adhesive labelling machine for bottles, etc., suitable for containers with a diameter from 15 to 80 mm, label height from 10 to 120 mm, conveyor width 80 mm, capacity up to 220 bottles per minute, bottle outfeed table used as a buffer, Cognex camera inspection of the print of the variable data (batch no., expiry date, etc.) on the labels, Marchesini MA155 horizontal cartoner, continuous motion, carton size range: A: 25 – 100 mm, B: 15 – 85 mm, H: 65 – 190 mm, capacity up to 140 cartons per minute, GUK leaflet folder from stack, bar code reader for leaflet, carton and presence of leaflet in the carton, Garvens S2 inline checkweigher with reject device and reject container, weighing range up to 300g, Multipack F40 collator & stretch bander for car ...
Complete coffee roasting and packaging line consisting of: coffee bean silos, coffee roaster, coffee mill, vacuum packaging machines (125 gr, 500 gr , 1000 gr) Price new 1.200.000 Euro For sale, price on request
Used weighing and packaging machine used for packing granules by TÉCNICAS MECÁNICAS ILERDENSES SL. model ILERSAC LBSD. New 2013. TECHNICAL DATA: PRODUCT CHARACTERISTICS: - Product BLACK COAL IN PROSPECT. - Density 340 / 645.16 kg/m3 - Fluidised Yes - Granulometry 30 µm - Sack type PAPER - OPEN BAGS - Bag weight 12 kg - Dimensions of bag 740x500x160mm - Dimensions of CP1 pallet 1200x1000x150 - Maximum pallet height 1800 mm Maximum production of 90 bags/hour CONNECTIONS: - Electrical connection 380V III+N+T 50 Hz - Installed power 12 kW - Control voltage 24 V - Air pressure 6 bar - Air consumption 150 NL/min. - Aspiration 1900 m3/h - 21 m/s Main features: - Programming of reading stability conditions. - Programming of weighing cycle and autocorrection parameters. - Zero variation detection range. - Precision: 5000 homologated divisions. - 50 operating reci ...
Bag inserts from Bosch Manufacturer: Bosch type: GSH 5031 B Year of manufacture 2002 With the Bosch GSH 5031 B, they get a machine that creates a vertical or horizontal pillow packs in cartons. Maximum speed: 180 bags / min 10 cartons / min Bag dimensions (mm) minimum (length x width): 100 x 70 maximum (length x width): 400 x 250 maximum height (thickness): 80 Carton dimensions (mm) (open) minimum (length x width x height): 180 x 70 x 60 maximum (length x width x height): 500 x 350 x 450 If you have questions you can me any time call on mobile: 01718367957
SIG-HBM: Maximum width of the film roll: 740 mm Control: Siemens S7 Product Moulding / straightening / filling / closing of bags - tubular bags Description horizontal bagging machine, rotating cross-sealing station for hot or cold sealing The machine is designed for the following products: chocolate bars, fruf bars, chocolate table, waffle, biscuit stacks, baked goods, deep food, non-food, pre-packaged products, cheese, meat,
Used automatic packaging line by MIFLEX-MASZ model SP-200, new 2014. Automatic packaging line (recently used for packaging herbs and teas in shaped sachets) with automatic packaging in doypacks. Can also be used for other types of assortment. It consists of a packer, sachet packer with feeder and dispenser. Built on a self-supporting frame with protective covers. Equipped with independent temperature control of each sealing jaw and infinitely variable speed control. Emergency conditions are visualised on the control panel . All product contact parts are easy to dismantle for cleaning and replacement, made of P.Z. H. certified materials. Sachet dispenser AS-20 Equipped with : - unwinding of the packaging material - guide roller system - volumetric dispenser with adjustable portions - sealing system - shaped sachet punching system - control cabinet - main drive with adjustab ...
used
I am offering them a complete vertical packaging plant. Multihead weigher by Ishida Vertical flow of Hassia Redatron and Bosch Bosch cartoning machine If you are interested, please contact me.
Vacuum Packers Dillmann Machine Systems DMV 400 DMS Specifications: 230 Volt / 50 Hz / 4 A Year of construction 2008 Weight: 40 kg Chamber size: D420 x W455 x H110 mm Welding bar length: 430 mm max. bag size: 390 x 450 mm Machine design Completely stainless steel Compact, solid design Surface sanded domed acrylic glass lid 2 inserts for different height levels in the chamber High-performance pump with 16 m³ capacity Ease of use Vacuum-adjustable Welding time adjustable Stock machine, immediately available! Function checked condition see original pictures. 03423-706493
Built in 2005 Capacity up to 35 pallets/h Film width 500 mm Max diameter 260 mm Core diameter max 76 mm Film thickness 17-30 mµ Equipment infeed belts delivery belt
The scope of delivery includes: Steel panel, new Material colour: sendzimir galvanised Total width: approx. 295 mm Total depth: approx. 1,110 mm Inner depth: approx. 1,104 mm for column depth: approx. 1,100 mm Clear span: approx. 992 mm Truss support: approx. 55 mm Height of bending: approx. 25 mm Material thickness: approx. 2.00 mm Weight / piece: approx. 5.95 kg Other quantities on request. Quantity: - clear width trusses: 01 pcs. 02 pcs. 06 pcs - 1,800 mm 07 pcs - 2,100 mm 08 pcs - 2,400 mm 09 pcs - 2,700 mm 10 pcs. - 3,000 mm 11 pcs. - 3,300 mm 12 pcs - 3,600 mm 13 pcs - 3,900 mm 20 pcs. 50 pcs. 75 pcs. 100 pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is a ...
Tuna Packing and Seaming Line: A complete, automated system for tuna packing and seaming, composed of the following high-performance equipment: De-palletizer for Empty Can Feed: Efficiently separates and feeds empty cans for the packing process. View details Magnetic Elevator: Transports cans using magnetic technology, ensuring smooth and secure handling throughout the production line. View details Tunipack GFDC Tuna Packing Machine: Fully automated tuna packing machine, designed to efficiently pack tuna in a 150 mm format, ensuring optimal packing speed and precision. View details Hermasa Transporter with Brine Doser: A reliable transporter system, integrated with an automatic brine doser to ensure precise application during the packing process. View details Oiling Machine for Fish Canning: Specialized machine for the uniform application of oil to fish, enhancing the preservat ...
Multivac M860F MC Thermoforming Packaging Machine High-performance thermoforming packaging machine designed for vacuum and modified atmosphere packaging (MAP) applications. The Multivac M860F MC offers reliable operation, flexible format handling, and hygienic stainless steel construction, making it suitable for industrial food packaging environments. General Information - Manufacturer: Multivac - Model: M860F MC - Year of Manufacture: 1995 - Operating Hours: approx. 30,000 - Ownership: Single owner - Origin: Switzerland - Current Location: Sharjah, UAE - Production Status: Ready for immediate installation and production - Condition: Excellent used condition - Vacuum Pump: Not included in the scope of supply Machine Dimensions - Length: 670 cm - Width: 96 cm - Height: 190 cm Film Specifications - Film Width: 420 mm Packaging Formats Forming Dimensions - 250 ...
Used machine: Kettner / Krones Blitzpac JUNIOR – carton and crate packer with 3 packing heads Manufacturer: Kettner / Krones Model: Blitzpac JUNIOR Capacity: up to 300 cycles per hour Packing system: 3 packing heads Efficient packer for cartons and crates The used Blitzpac JUNIOR packaging machine is a proven solution for the automatic packaging of bottles or containers in crates and cartons. It is ideal for medium-sized and large bottling companies in the beverage or food industry. Technical features: • Robust design for continuous operation • 300 cycles/hour – high efficiency in the packaging process • 3 packing heads for flexible handling of different formats • Compatible with common crate and cardboard dimensions • Proven Krones/Kettner quality Applications: • Beverage filling (beer, water, soft drinks) •Food industry • Packaging of bottles ...
Dispensing system for capsule 16-fold with Packaging automation Abstract: The capsules are removed from the open form with the removal arm. On the removal arm, the presence of the parts is controlled. As soon as the removal arm reaches its end position in the robot the parts are turned with a 180° turning station. After the turning process, the capsules are stacked directly horizontally. A separate stack is formed for each cavity. Once the stacks have reached a number of 24 pieces, all of them are Stack ejected into a buffer. This buffer is driven by a vertical movement with a servo motor. As soon as all 16 stacks are in the buffer, it moves each level to the level of stacking table. Once a series has reached this level all 4 piles are pushed onto the table. From this table, the stacks are then moved by means of a 6-axis robot automatically packed into the boxes. S ...
MARCHESINI CASE PACKER PS-300 Year of manufacturing: 2006 Semi-automatic case packer for small to medium output production requirements. For use in various industries, including pharmaceutical, cosmetics, nutraceutical, FMCG, medical devices. Used, in excellent conditions and complete with manuals. Wide range of cases and products working sizes • Case feeding area safe and free from any mechanical movement • Fully enclosed structure with safety guards • Omron HMI • CE marked Output: up to 20 cases/min (depending on product type, individual box and case sizes) Case sizes • Length: 200 mm to 600 mm; Height 65 mm to 400 mm; Width: 125 mm to 400 mm Individual box sizes • Length: 25 mm to 580 mm; Height: 65 mm to 300 mm;Width: 10 mm to 120 mm DIMENSIONS • Size: 2300 mm x 1500 mm (incl. outfeed roller conveyor) x 1900 mm; Weight: 650 kg
SIAT SM44-HD - Automatic Carton Sealing Machine Optimize your packaging lines with a robust, reliable and effective. 4 Strengths: - Automatic adhesive carton closing machine. - Designed for high industrial speeds. - Robust and secure structure, suitable for logistics and industrial environments. - Easy to use thanks to its intuitive control panel. - Quick and easy maintenance with easy access to components. - Italian reliability (SIAT MANUFACTURE - M.J. Maillis Group). n Technical characteristics: • Model: SM44-HD • Year: 2017 • Power: 360 W • Amperage: 1.33 A • Power supply: 400 V – 50 Hz – Three phase • Manufacturer: SIAT (Italy)
Soco System packing station system 14800mm Double Deck Roller Conveyor with 800mm Steel Rollers Lower roller conveyor with drive Upper roller conveyor without drive (gravity roller conveyor) 9850 mm Roller conveyor with plastic rollers 600 mm Ø 48 mm with drive and two continuous flaps Curve with conical rollers 90° with two drives for high loads 6000 mm roller conveyor with plastic rollers 600 mm Ø 48 mm with drive 9750 mm Roller conveyor with plastic rollers 600 mm Ø 48 mm without drive 6 x Rocholz Packing and Work Tables System Flex Cardboard magazine Workplace lighting Keyboard and mouse tray with articulated arm Monitor mount with articulated arm 10-way power strip Perforated back panel PC mount Shelf Width 2000 mm Depth: 800 mm 6 x 1000 mm transfer roller conveyor, 600 mm steel rollers 6 x 1000 mm transfer roller conveyor, 600 mm plastic rollers ...
Originates from prominent pharmaceutical manufacturing in Europe. CE Marked. Excellent used condition. Working Description Marchesini Pack Service PS300 semi-automatic case packer for small to medium output production requirements; suitable for: Contract Packing, Pharmaceutical, Cosmetics, Nutraceutical, Medical Devices and other industries. The pre-formed cases must be placed directly on the loading area. Cartons are fed by conveyor from the machine in front of PS300 into its stacking unit, where they are collated upwards, as it is programmed through the Operator Interface Panel. The case is then automatically fed and discharged on a free running conveyor. Wide range of cases and products working sizes Case feeding area safe and free from any mechanical movement Fast and easy change over, with digital indicators and quick fixing o ...
Originates from prominent pharmaceutical manufacturing in Europe. Fully enclosed and guarded structure – extra safety for operators. Working Description: Marchesini Pack Service PS300 semi-automatic case packer for small to medium output production requirements; suitable for: Contract Packing, Pharmaceutical, Cosmetics, Nutraceutical, Medical Devices and other industries. The pre-formed cases must be placed directly on the loading area. Cartons are fed by conveyor from the machine in front of PS300 into its stacking unit, where they are collated upwards, as it is programmed through the Operator Interface Panel. The case is then automatically fed and discharged on a free running conveyor. - Wide range of cases and products working sizes - Cases feeding area is entirely safe, free from any mechanical movement - Torque overloading control on ...
Machine originates from a prominent Pharmaceutical Factory in Europe, and it is in overall excellent condition – little use, serviced and well looked after. Automatic case packer Working Description: Automatic case packer equipped with pre-stacking unit allowing to accommodate high incoming speeds of the individual product / boxes to be packed into cases and built with adjustable, horizontal flat case magazine. This CP-28 BA example is additionally fitted with following: · Infeed belt conveyor adjustable 90mm to 245mm · Automatic product pusher into case · Adjustable case opening and former station · Case closure by tape with 2 taping heads · Control panel with Siemens S7 PLC and Siemens HMI Technical information: Output up to 8 cases per minute within following min / max case sizes: Length: 220mm ...
The Table Top Print bag packer enables the efficient packaging and sealing of products into pre-made bags and is suitable for various formats. The machine is easy to operate and has a user-friendly display that can be used to set up, save jobs and control operating parameters. For more flexibility, it offers automatic and manual operating modes with a secure sealing rail. The briefing of a packaging employee takes less than five minutes. With integrated thermal transfer printing technology, pouches can be printed directly with high-resolution graphics, text and barcodes, eliminating the need for separate labeling. Features - Multi-color screen for easy adjustment - Number of products to be packed can be set in advance - Integrated total counter of the products (incl. reset option) - Roll change in less than a minute - Welding by foot signal, automatically or by hand pres ...
SALES PROPOSAL GAS TURBINE PACKAGE – SOLAR TAURUS 70 1. General Information Equipment: Industrial Gas Turbine Package Manufacturer: Solar Model: Taurus 70 – 10302S CS/MD Stand Core Turbine Year: 2019 Package Year: 1997 Condition: Used – Good Operating Condition 2. Technical Specifications • Output: 8,500 kVA • Frequency: 50 Hz • Voltage: 11,000 V • Alternator: LS – 6,300 V • Fuel Type: Natural Gas 3. Operating Data • Total Package Hours: 14,517 hours • Number of Starts: 127 • Next Planned Major Overhaul: 30,000 running hours • Borescope Inspection: Completed in 2024 (report available upon request) 4. Key Advantages ✔ 2019 Core Turbine (recent upgrade) ✔ Low number of starts ✔ Recent borescope inspection ✔ Suitable for 50 Hz industrial power generation ✔ Natural gas operation 5. Commercial Terms • Availability: To be con ...
MIG/MAG hose package -MIG/MAG hose package: water-cooled -Length: 4.0 m -Weight 3.4 kg
MIG/MAG hose package -MIG/MAG hose package: water-cooled -Length: 3,45 m -Weight 3 kg
MIG/MAG hose package -MIG/MAG hose package: water-cooled -Length: 4.2 m -Weight 3,8 kg
TIG hose package, welding torch, hand welding torch, TIG torch -WIG hose package: torch type SR 26, air-cooled -Length: 4 m -Tuchel connector: 5 pin -Weight: 2.5 kg
MIG/MAG hose package -MIG/MAG hose package: water-cooled -Length: 4.0 m -Weight 3.5 kg
MIG/MAG hose package -MIG/MAG hose package: water-cooled -Length: 3.0 m -Weight: 3.1 kg
Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: approx. 160 bar -Liter output: approx. L/min -Drive: 11 kW 1440 rpm -Dimensions: 710/280/H325 mm -Weight: 102 kg
maximum number of results exceeded
please refine your search
550 € 
