vacuum lif used for sale

Used homogenizer AK SYSTEMS, type: Hydro Grind laboratory system 50 liters For the production of liquid to medium-viscosity emulsions, dispersions or suspensions - Laboratory equipment with a capacity of 50 litres - All-in-one solution for food, cosmetics, chemicals and pharmaceuticals - Enables easy introduction of solids into liquids - Allows homogenization into a fine droplet structure - Vacuum container - With double jacket for heating or cooling (2 bar) - Maximum temperature in the container: 95°C -Vacuum pump - Connection: 400 V, 50 Hz, 3Ph, 8.0 kW - Weight: 120 kg (without control cabinet) - Condition: Good, ready to use Visits and test runs are possible by arrangement.

Vacuum filler Manufacturer: Handtmann Model: VF 628 Efficiency: up to 6000kg/h Electric power: 18kW Voltage: 400V 50Hz 3N Filling pressure: up to 72bar Portion range: 5-100.000 g Hopper capacity: 200 liters Dimensions: 2200x1350x2100mm

Vacuum tumbler VT 1000 incl. pumps and controls

Sind cutter 200 liters with vacuum Type: SVC 200 Completely made of special stainless steel 200-liter bowl made of stainless steel Shaft speed 200/1800/3600 rpm Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in a set Dimensions: 260x220x195cm Electric power: 63 kW Voltage: 400 V, 50 Hz Weight 5.500 kg

Sind cutter 330 liters with vacuum Type: SVC 330 Completely made of special stainless steel 330-liter bowl made of stainless steel Shaft speed 200/1800/3600 rpm Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in a set Dimensions: 260x220x195cm Electric power: 105 kW Voltage: 400 V, 50 Hz Weight 5.500 kg

Type: SV 300 l 2P-V Completely stainless steel Hopper capacity 300 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 5 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of the machine in cm: Width: 124 Length: 143 Height: 147

Type: SV 660 l 2P-V Completely stainless steel Hopper capacity 660 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 9.5 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of the machine in cm: Width: 140 Length: 170 Height: 161

Type: SC 200 Completely made of special stainless steel 200-liter bowl made of stainless steel Frequency speed regulation 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in set Machine dimensions in cm: Width: 220 Depth: 200 Height: 182 Electric power: 57 kW Voltage: 400 V, 50 Hz

Type: SC 330 Completely made of special stainless steel 330-liter bowl made of stainless steel Frequency speed regulation 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in set Machine dimensions in cm: Width: 243 Depth: 230 Height: 182 Electric power: 80 kW Voltage: 400 V, 50 Hz

Type: SC 20 Completely made of special stainless steel 20-liter bowl made of stainless steel Knives speed frequent speed regulation (6 speed) Main cover made of special steel, stainless steel 3 knives in set Machine dimensions in cm: Width: 83 Depth: 63 Height: 91 Electric power: 1,5 kW Voltage: 380 V, 50 Hz

Industrial vacuum cleaner Brand: Nilfisk, model: T305, motor: 3 Kw (4 hp), year: 2019.

All stainless steel Hopper capacity: 2500 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 25 KW Installation dimensions of machines in cm: Width: 215 Length: 235 Height: 225

All stainless steel Hopper capacity: 2000 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 18 KW Installation dimensions of machines in cm: Width: 193 Length: 227 Height: 215

All stainless steel Hopper capacity: 1200 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 11 KW Installation dimensions of machines in cm: Width: 162 Length: 224 Height: 191

Verbufa Forming Machine with Integrated Flattening Belt (MBF COEX) The latest series of Verbufa COEX forming machines with wide conveyor belt and integrated flattening belt is the solution for a high production capacity of filled products. The MBF COEX machine has been specially developed for the intelligent and efficient shaping and portioning of stuffed products such as potatoes, cheese, meatballs and croquettes. With the integrated flattening belt, this forming machine is also ideal for the production of stuffed burgers. The MBF is available with 2 to 16 product streams and a conveyor belt of 400, 600, 800 or 1000 mm width. Demonstration/demonstration machine of a factory representative

All stainless steel Hopper capacity: 750 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 9 KW Installation dimensions of machines in cm: Width: 143 Length: 195 Height: 187

Hydraulic Piston Filler Manufacturer: Talsa Model: F25s Robust stainless steel construction Lid and piston in solid s/s sheet of great thickness and resistance Easily removable piston Automatic piston decompression Easily accessible speed control Independent hydraulic oil reservoir Volume: 25 liters Capacity: 20kg Electric power: 1.1kW Dimensions: 53x57x124cm

Cutter Manufacturer: Talsa Model: K30ns Strong, all stainless steel construction, solid bowl and lid Very high cutting speed, fully variable from 500 up to 3500 rpm Smooth start of knives due to electronic drives, overload protection Electric device to prevent condensations inside the machine frame Transparent noise protection cover Volume: 30 liters Bowl Capacity: ± 5-22 kg Electric power: 5.6kW Voltage: 380V 50Hz Weight: ± 330 kg

Cutter ALPINA 500 VACUUM After capital renovation. 3-month warranty on parts. All bearings and sealings in this machine are new. General overhaul of the vacuum pump, actuators and hydraulic pump. New electrical cables. New hydraulic cables. New control panel and controls. New set of knives. Delivery time: 4 weeks - now during renovation. 15% prepayment.

Height 1700 mm Width 1600 mm Length 2300 mm Capacity 300 l Power supply: 400V 50Hz 3N Total power 106 kW Main Material Stainless steel, acid-resistant Cutter Type Bowl Cutter Cutter design Stainless steel, acid-resistant Number of knives on the head 6 pcs.

Height 1700 mm Width 650 mm Length 900 mm Capacity 50 l Power supply: 400V 50Hz 3N Total power 4 kW Main Material Stainless steel, acid-resistant Loading No loading, it is possible to buy a pillar loading for the machine Product Administration Method Vane Rotor Stuffer Type Vacuum Stuffer

Vacuum Pump ENERGO ASYNCHRONOUS MOTOR Type: ANP80A2 Motor: 1.5 kW 220-380 V 50 Hz Active Gr: 81%

We are selling here a vacuum filler from the manufacturer Frey, type E120 in a very good used and functional condition. The machine runs on 400 volts, 120 litre hopper, LCD control, clipper connection, for filling and portioning, workshop tested, immediately ready for use, dimensions W/D/H 85/60/170 cm, others on request.

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 500 liters Machine dimensions in cm: Length: 178 Width: 102 Height: 155 Electric power: 3 kW

Vacuum exhaust filter, filter HEADLINE FILTERS 433SF pressure max. 2 bar flow rate max. 75 Nm3/h maximum temperature 200 °C stainless steel ! Dimensions: 630 x 430 x 300 mm

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1000 liters Machine dimensions in cm: Length: 214 Width: 133 Height: 190 Electric power: 5 kW

Vacuum machine, single chamber Efficient vacuum machine of exceptional quality for vacuum packaging of meat, cured meat products, fruits and vegetables Ideal for fast food facilities, hotels, restaurants and other catering facilities Dimensions: 540 × 490 × 540mm Heaters: 2 x 40 cm Electrical power: 1.5kW Weight: 59 kg

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1500 liters Machine dimensions in cm: Length: 240 Width: 144 Height: 210 Electric power: 5 kW

Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 2000 liters Machine dimensions in cm: Length: 270 Width: 154 Height: 222 Electric power: 6.5 kW

Compact ejector with vacuum switch SCHMALZ SCP20FSRP-NO-SO 10.02.02.01671 / 1 p 2 to 6 (opt. 5 to 6) bar vacuum switch VS-VPM-NC-SO Dimensions: 180 x 130 x 22 mm

Vacuum pump RIETSCHLE CGZE-473-4718 R 1 F 5101 year: 1984 motor: 6.5 kW 380 / 460 V Dimensions: 980 x 820 x 600 mm

Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle SKP 35826-02 (03) Baujahr / Year 1995 - SN. 1663459 Frequency 50 Hz Speed 2900 min power required 3 kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Vacuum pump RIETSCHLE VFT 500 (03) Article no.: 102092-0320 500 m3/h 150 mbar motor: 15 kW 380 / 660 V Dimensions: 1520 x 1050 x 1300 mm

Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle SKK 38203 (11) Baujahr / Year 1998 - SN. 1901355 Frequency 50 Hz Speed 2900 min power required 4,20 kW inlet capacity 94/72 max. vacuum 420 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Druck- und Vakuumkompressor - Pressure and Vacuum Pump Becker VCL 60 DV Serial-No. 28503 Frequency 50 Hz Speed 1400 min power required 3 PS inlet capacity 60 m3/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Vacuum Pump, Vacuum Ejector, Air-Powered PIAB Multiejector 940 Series 1348 used ! Dimensions: 480 x 430 x 290 mm

Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle SKK 38203 (11) Baujahr / Year 1997 - SN. 1822845 Frequency 50 Hz Speed 2900 min power required 4,20 kW inlet capacity 94/72 max. vacuum 420 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle TLV 15 (01) Baujahr / Year 1992 - SN. 1460773 Frequency 50 Hz Speed 1390 min power required 0,58 kW inlet capacity 16,3 m3/h max. vacuum 150 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle TLV 15 (01) Baujahr / Year 1992 - SN. 1464418 Frequency 50 Hz Speed 1390 min power required 0,58 kW inlet capacity 16,3 m3/h max. vacuum 150 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle TLV 15 (01) Baujahr / Year 1992 - SN. 1464435 Frequency 50 Hz Speed 1390 min power required 0,58 kW inlet capacity 16,3 m3/h max. vacuum 150 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Druck- und Vakuumkompressor - Pressure and Vacuum Pump Becker SV 2.130/1 Baujahr / Year 1978 - SN. B676219 Frequency 50 Hz Speed 2900 min power required 3 kW inlet capacity 130 m3/h max. vacuum 195 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle VEB GR2HVX SN. MA24F165L2 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Broadband Vacuum Gauge VACOM ATMION ATC25KLE Dimensions: 185 x 105 x 75 mm

Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle SKK 38203 (40) Baujahr / Year 2006 - SN. 2595119 Frequency 50 Hz Speed 2900 min power required 4,20 kW inlet capacity 94/72 max. vacuum 420 m/bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Vacuum System Controler BOC EDWARDS SYSTEM CONT 4CH Item no.: D37373100 200 - 400 V 40 W Dimensions: 510 x 280 x 160 mm

Vacuum Safety Module BOC EDWARDS EMS MODULE ASSEMBLY Emergency Stop Interlock Item No.: D37380500 24 V AC / DC Dimensions: 340 x 90 x 55 mm

The MBF with integrated flattening belt was specially developed for shaping handmade burgers, tartare and minced steak. In addition, this machine forms a wide variety of products into balls, discs and sticks. The Verbufa wide conveyor belt forming machine guarantees a high production capacity. In combination with the Handtmann vacuum filling machine and the Verbufa fill flow divider, a very high and consistent weight accuracy is guaranteed. This not only ensures lower costs, but also contributes to more sustainable production. Demonstration machine/demonstration machine of a factory representative

The Verbufa skewer machine is the best solution for the production of (meat) skewers. A skewer is automatically inserted into the dosed meat. Products such as kofte, kebab, cevapcici and meat rolls can be produced easily, cleanly and quickly with this skewer machine. The Verbufa skewer machine is connected directly to the outlet of a Handtmann vacuum filling machine, so that the weight accuracy of the portions is very high. This not only ensures lower costs, but also contributes to more sustainable production. Demonstration/Demo Machine

Vacuum valve, spring bellows angle valve LEYBOLD Cat no. 29720 Alu ! Dimensions: 105 x 60 x 35 mm

Vacuum valve, spring bellows angle valve LEYBOLD Cat no. 29721 Alu ! Dimensions: 105 x 60 x 35 mm