vacuum homogenizer used for sale

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, conveyor belt with vacuum connection -Belt conveyor: Vacuum surface for suctioning the material to be conveyed -Belt width: 100 mm -Conveyor length: 650 mm -Drive shaft: Ø 30 x 100 mm -Key width: 8 mm -Dimensions: 650/520/H250 mm -Weight: 51 kg

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums, wet/dry vacuums, liquid and chip vacuums, water vacuums, wet vacuums -Manufacturer: cleancraft, industrial vacuum cleaner type wetCAT 131 IRH -Connection: 230 volts -Power: 2.4 kW -Dimensions: 500/470/H1100 mm -Weight: 10 kg

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums, wet/dry vacuums, liquid and chip vacuums, water vacuums, wet vacuums -Manufacturer: Wap, Industrial vacuum cleaner, 2-motor wet/dry vacuum cleaner -Type: turbo M2 -Connection: 220...240 volts -Power: 1400...1600 W -Dimensions: 700/600/H1070 mm -Weight: 30 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, rotary vane pump -Manufacturer: Thomas, Rotary vane vacuum pump -Type: VTE 10 27740125 -Drive: 0.35 kW / 2700 rpm -Vacuum: 150 mbar -Flow rate: 10 m³/h -Dimensions: 265/160/H155 mm -Weight: 10.2 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 291 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 288 kg

Model:MKR300 Year:2018 Condition:Used Serial Number:10070346G Stock Number:3307 Double jacket for cooling, Busch vacuum pump and lifting arm for 200L tote bin Mixer:300 litres Filling:max 220 litres Mixing speed 0 - 30 RPM Refrigerant: R404a Power: 3 x 400V, 50Hz, 6.5kW Dimensions: 1700 x 1950 x 2450 mm Weight: 1200 kg

VACUUM STUFFER, VEMAG ROBBY1, TYPE:134 Technical description: Serial number: 134 0454 Power supply: 220-380 V/ 50-60 Hz, 5.1 Kw Approx. weight: 425 Kg

Machine: Heating press Heating area: 3700 x 1400 mm Max. temperature: 180 °C Power: 37 kW Control: Digital with Auto Timer + Audible/Light Alert Tabletop: anodized aluminum, double-sided heated System: Vertical pneumatic opening/closing Working height: 1000 mm Total dimensions: 4610 x 1580 x 1790 mm Weight: 1635 kg Mobility: Ø125 mm swivel wheels with brake Power supply: 220/400 V, 3~, 50/60 Hz Auction-ID: A1-45443-31

Vacuum Filling Machine/Sausage Filling Machine/Vacuum Stuffer Manufacturer: REX DÜKER Type: RVF 327 Fully electronically controlled filling and portioning machine, suitable for all types of sausage for straight filling, portioning and twisting of all types of casings. Particularly gentle sausage meat filling with a clear filling pattern. Equipment: 100 litre filling volume Funnel divisible 60/40 L Machine solid stainless steel Speed, speed and break length infinitely selectable Level indicator, piece counter, unit shutdown Portioning range 5 – 10,000 g Portioning speed up to 700 portions/min. Clipper connector on the back Max. filling pressure: 40 bar Three-phase current 400 volts, 50 Hz, 3 phases Program memory for 200 filling programs Unique hygienic design Modern drive concept Minimal energy consumption 12" touch screen control Extremely quiet and qui ...

Model VM400-30 Jaar 1998 Conditie Gebruikt Serienummer: 1990 Voorraad nummer: 3062B Belt width: 400 mm Capacity: max 30 strokes/min Hopper; 100 litres Belt speed: 1.5 - 15 m/min Compressed air: 6 Bar, 300 l/min Power: 3 x 380V, 50Hz, 5kW Dimensions: 2150 x 750 x 1750 mm Weight: 640 kg

A large-format vacuum thermoforming machine Geiss with two window plates is available. Heating power: 360kW, connected load: 370kW, window plates: 2, min. window plate dimensions 1: 1360mm/860mm, max. window plate dimensions 1: 2460mm/1460mm, window plate adjustment 1 X/Y: 1100mm/600mm, min. window plate dimensions 2: 940mm/520mm, max. window plate dimensions 2: 2400mm/1400mm, window plate adjustment 2 X/Y: 1460mm/880mm, materials: PS/ABS/TPU/PMMA. Total system dimensions X/Y/Z: approx. 9150mm/2350mm/4000mm, total weight: approx. 15500kg, control: Siemens Simatic Panel PC, operating hours (April 2026): approx. 20100h. Documentation available. An on-site inspection is possible. Without vacuum pump, spare parts and temperature control unit. Expected to be available from October 2026.

BUCHI Syncore Q-101 platform + KNF vacuum pump + V-850 vacuum controller Model: Büchi Analyst Q-101 Vibration frequency: 0 - 300 min⁻¹ Heat output: 1500 W Temperature range: Up to 100 °C W×D: 480×487 mm Included: Polyvap R-12 Rack (120ml) A condensing unit and flask A KNF vacuum pump A Buchi V-850 vacuum controller Traces of rust in the bottom of the heating element Equipment tested

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Laboratory homogenizer mixer Manufacturer: Becomix Type: RW 2.5 Content: 5 litres boiler capacity Technical specifications : Vacuum homogenizing system Mobile table version Usable space: Operating temperature 100 °C Pressure -1/+1 bar, vacuum-resistant Capacity 5 litres Boiler room: Operating temperature 110 °C Pressure 4 bar Power 4.8 kW Content 2 litres

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Edwards RV8 Vacuum Pump Model RV8 Code: A654-01-903 Final pressure manufacturer: 2 × 10-3 mbar Ballast gas I: 8 × 10-3 mbar Ballast gas II: 2 × 10-2 mbar Weight: 29 kg Standards: Ex II3 Gc IIB T4 Noise level: 48 dBA, 50 Hz External dimensions (W) x D x H: 47 x 16 x 27 cm Raised Limit Vacuum: 23.0 x 10-3 mbar. (0.023 mbar) With new oil changed on 11-09-25 with filter

Various manufacturers including KÄRCHER, in stock on pallets Auction-ID: A1-45495-414

First vacuum cleaner size: 700 x 600 × 1200 mm Dimensions according to vacuum cleaner: 500 × 500 x 1000 mm Auction-ID: A7-45181-29

4 suction plates, load capacity 300kg, incl. transport rack Auction-ID: A1-45690-11

Commercial vacuum cleaner WÜRTH ISS 55-S, traces of use

Commercial vacuum cleaner KÄRCHER Professional NT 35/1 Tact, max. 2,200 W

Commercial Vacuum Cleaner MAFELL S 35 M 2020, 1,400 W, S/N 1303511

Commercial vacuum cleaner FESTOOL CTL MIDI I, nameplate not visible

Commercial Vacuum Cleaner FESTOOL CTL MIDI

Commercial vacuum cleaner KÄRCHER WD 3 P, approx. 1,000 W, S/N 162376

Equipped with: 2x extra suction cups of 955x995x60 and 750x750x18, Honda GX 200 4-stroke engine, interchangeable base plate Auction-ID: A1-40134-354

Manufacturer: Rex Model: RVF 761 Condition: Used Serial Number: 7611040927 Stock Number: 3364 Hopper: 250 litres Pump capacity: max. 6100 kg/hr Filling pressure: max. 70 bar Working hours: 19648 Power: 3 x 400V, 50Hz, 15kW Dimensions: 2320 x 1440 x 3035 mm Weight: 1100 kg Filling, portioning and linking Including linker and DHG400 casing holder With lifter for 200 L eurobins

Edwards E2M1.5 Vacuum Pump Model E2M1.5 Manufacturer Code: A37122919 Final pressure manufacturer: 1 × 10-3 mbar Ballast gas I: 8 × 10-3 mbar Oil Capacity Range: 2,000 × 10⁻4 m³ to: 2,800 × 10⁻4 m³ Maximum Continuous Outlet Pressure: 1,500 × 10⁵ Pa Weight: 14 kg Noise level: 55 dBA, 50 Hz External dimensions (W) x D x H: 35 x 20 x 25 cm Raised Limit Void: 480.0 x 10-3 mbar. (0.48 mbar) With new oil changed on 11-09-25 with filter

KNF N035.3AN.18 IP20 Vacuum Pump New equipment in its original packaging Year of manufacture: 2021 Technical features: Vacuum limit: 13 mbar abs. IP20 Pump Head Aluminium Membrane: Neoprene (CR) Flap: Stainless steel Voltage: 230 V, 50 Hz Current: 1.55 A Power: 270 W Pump Flow Rate: 30 l/min Dimensions: 323 x 250 x 222mm

Commercial Vacuum Cleaner Accessories / Cleaning Kit FESTOOL D27/D36K-RS-Plus, Systainer

Voltage 110-120V. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-39

Voltage 110-120V. Qty 2 Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-75

Voltage 110-120V. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-73

Including: 1 trolley 133 x 82 x 90 cm (L/W/H) Auction-ID: A1-45762-91

One device! Display refers to the green device. Auction-ID: A1-45711-191

Voltage 110-120V. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-10

Wet/dry vacuum cleaner KÄRCHER WD 2 Plus, S/N 199915

Industrial vacuum cleaner PROTOOL VCP360E-MAC

Commercial Vacuum Cleaner NILFISK Aero 21-21 PC Inox EU, S/N 3520221805696

Vacuum pump for ENGEL Duo 7050/1000 built in 2004

Vacuum pump SIEMENS UC 1105/085685308 45 kW, 300 kg

Vacuum pumps approx. 3 pieces

Vacuum pump SIEMENS

1 shaft with direct gear drive; Feeding spiral is driven by gearbox; Mouthpieces and spare parts are provided separately on pallet; Control cabinet with control (in need of renewal) is included; Length 3.70 m, width 1.10 m, height without hopper 1.35 m, hopper height 0.50 m, inlet opening 35 x 35 cm Current type: 3-phase AC; Operating voltage 380 V; connected load 2.5 kW, motor type KMR 160 M8; Engine power 11 kW; Engine speed 720 rpm. The plant was shut down in 2024. more photos on request

Vacuum pump on a sled; tanker without chassis Auction-ID: A1-40135-205

W.O.S. 40B vacuum unit. Capacity of 40m3 vacuum Features: Honda GX240 petrol engine Stelcon plates nap a 75 x 75 cm Lifting eye Spoon board cutout Auction-ID: A1-40135-266

Year of construction 2013 3 kW Container volume 0.5 sqm, load capacity 1000 kg Weight 230 kg Original price approx. 10000,- EUR Very good condition, little used

Year of construction 2013 3 kW Container volume 0.5 sqm, load capacity 1000 kg Weight 230 kg Original price approx. 10000,- EUR Very good condition, little used