vacuum furnace used for sale

Various spare parts for annealing furnaces

Manufacturer : Nabertherm Model: N 875/65HA Year of Manufacture: 2015 Maximum Temperature: 650 degrees C Power Supply: 400 V / 50 Hz Current: 39 / 39 / 39 A Power Rating: 27 kW - Condition: This furnace is in like-new condition. Since arriving at the current facility in 2020, it has never been observed in operation. Employees report that it was used only two or three times at the very beginning. Find more here - / Contact us at -

Manufacturer: Nabertherm Model: RSRC 470/270/13S Year of Manufacture: 2019 Type of Machine : Large-diameter tube furnace Technical Specifications: - Maximum pipe diameter: 470 mm - Heated length: 2700 mm - Number of heating zones: 3 - Furnace chamber dimensions: 670 x 2700 x 670 mm - Maximum temperature: 1300 degrees C - Operating temperature: 1250 degrees C - Rotation control range: 1 to 5 rpm - Electrical power: approximately 120 kW - Nominal voltage: 400 VAC - Connection power: 120 kW/kVA - Outer dimensions (L x W x H): 3150 x 1560 x 1155 mm (without base frame) - Weight: under 3000 kg - Documentation: EC declaration of conformity and operating instructions included Find more here - / Contact us at -

A retort furnace PFS Anlagenbau UG for gas nitriding, nitrocarburizing, and tempering is available. Load weight range: 750kg-6000kg, max. operating temperature: 750°C, treatment chamber dimensions X/Y/Z: 1800mm/900mm/900mm, number of burners: 4, burner type: recuperative, burner output: 4×80kW, loading height: 1200mm, max. evacuation temperature: 350°C, retort material: 1.4841, circulator air volume flow: 10000m³/h, nitriding system manufacturer: Process-Electronic, vacuum pump capacity: 240m³/h, total pressure: below 0.7mbar, max. operating pressure: 1.45bar. Documentation available. An on-site inspection is possible.

max. temperature: 1280 Grad size of opening: 350 x 250 mm depth of chamber: 500 mm volume: 41 L voltage: 400 V total power requirement: 15,0 kW weight of the machine ca.: 265 kg dimensions of the machine ca.: m - Serial-No.: 305266 - control: NABERTHERM B150 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: ELIOG Type: KFG-5-1400 Year of Make: 1997 Electrical connected load: 32 kVA Connected load gas: 1450 kW Temperature max. 1400°C Condition of the facility: good, has been modernized in several steps We can offer the facility completely renovated.

Rated temperature: 1100°C Usable dimensions (WxDxH): 200 x 300 x 150 mm electr. Connection: 230 V, 1.4 kW Heating time: 100 min. Footprint: 752 x 576 x 700 mm Weight: 78 kg

Oven, heating oven, heating chamber, heating cabinet, hardening oven, annealing oven -Manufacturer:Artur Nolzen, Chamber dryer oven type KTS 53/30/70 -Temperature: max. 1100 °C -Chamber size: 710 x 535 x 300 mm -Heating output: 25 kW -Automatic temperature control -Individual components: see photos -Dimensions: 1630/1530/H1700 mm -Weight: 1698 kg

A Dentsply porcelain firing furnace for dental laboratories is available. Power: approx. 1.2kW, max. temperature: 1200°C, weight: approx. 30kg. An on-site inspection is possible.

max. temperature: 1280 Grad size of opening: ca. 350 x 350 mm depth of chamber: ca. 400 mm heating capacity: 3,3 kW Total Dimension: 830 x 700 x 600 mm weight of the machine ca.: 120 kg control Program Controller S8 Only ceramics were fired in this furnace. It has a very low power consumption Base frame not included in price. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26150 Technical data: - Nominal temperature / continuous temperature infinitely variable up to 1280 ° - Three-sided heating ( bottom + side ) - Temperature control via NABERTHERM Controller C 30 - Drive 400 V / 3.6 kW - Interior dimensions approx. W 250 x H 140 x D 350 mm - Usable volume 11 L - Space requirement approx. W 800 x H 600 x D 750 mm - Weight approx. 80 kg

A DeguDent high-temperature sintering furnace for dental zirconium oxide for sintering pre-sintered zirconium oxide crowns, bridges and frameworks is available. Temperature: 1350°C, machine dimensions X/Y/Z: approx. 500mm/650mm/550mm, weight: approx. 80kg. An on-site inspection is possible.

Electrically heated bogie hearth furnace for a maximum operating temperature of 1,300°C (brick lining designed for up to 1,400°C). Incl. 1 piece of hearth wagon (track-bound) and switchgear (built in 2004). Electrical power: Approx. 170 kW, dimensions usable space (WxDxH): 1,450 mm x 2,600 mm x 1,400 mm.

A horizontal glass tempering furnace is offered. Max. temperature: 750°C, heating zones: 10, control system: PLC. Equipped with roller conveyor infeed and outfeed with ceramic rollers, high-pressure cooling blower, control cabinets, hydraulic power unit. Inspection possible by appointment.

Hardening furnace Lg.Nr. 26164 Technical data: - Nominal temperature / continuous temperature infinitely variable up to 1200 ° - Three-sided heating ( bottom + side ) - Temperature control via NABERTHERM Controller C 30 - T. max. 120 min - Drive 400 V / 12 kW - Interior dimensions approx. W 350 x H 250 x D 770 mm - Usable volume 41 L - Space requirement approx. W 950 x H 1370 x D 1600 mm - Weight approx. 400 kg

The system consists of two bell furnaces, maximum temperature: 1100°C, annealing chamber: 2x 1000mm, electrical connection: delta, current rating: 433A, connected load: 300kW, equipment: power control, temperature control, process monitoring, safety controller, emergency stop system, motorized drive for bell movement, air conditioning unit, electrical control cabinet, and control system. Inspection on site is possible.

Serial Number: SN343064 , Max. temperature: 650° , Power: 9.8Kw , Furnace room capacity approx.:400x400 , Depth approx.: 600 mm , with digital control terminal, see photos for more details Auction-ID: A7-48332-803

Three-phase hopper oven for flow drying, 6600W power. Items sold in unverified status Items not subject to sales restrictions Auction-ID: A7-48361-8

BINDER FD-115 furnace / charging oven with forced convection 300°C Capacity: 115 liters (FD115) Temperature range: Room temperature plus 5°C to 300°C Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 1600 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 85 kg Tested at 150°C

Technical details Type: Industrial tooling components (fixture blocks / die holders) Configuration: Cast metal blocks with flange geometry Quantity: 5 units Design: - Oval/rectangular flange shapes - Central bores (single and double configurations) - Multiple bolt holes for mounting Material: Cast iron or cast steel Construction: Thick-walled, designed for high mechanical and thermal loads Application: Fixture bases, die holders, mould supports, or furnace/press tooling Load capability: Suitable for high-temperature and high-stress environments Dimensions and weight (approx.) Length: 300 mm Width: 200 mm Height: 120 mm Weight: 120 kg (total) Auction-ID: A7-48441-129

HINDELAN KVO-800 – Tilting Crucible Furnace General data: Manufacturer: Hindenlang Model: KVO-800 Year of manufacture: 1990 Machine type: Tilting crucible furnace Installation: Pit-mounted system Technical details: Capacity: approx. 600 – 800 kg (aluminium) Tilting system: Mechanical / assisted (pivot arms) Description: Industrial tilting crucible furnace designed for melting and handling aluminium. The pit-mounted configuration ensures stability and efficient operation, while the mechanical tilting system allows safe and controlled pouring of molten metal. Suitable for foundry and die-casting applications. Auction-ID: A7-48441-18

General description Industrial electric crucible melting furnace, designed for melting non-ferrous metals such as aluminum, brass, or bronze. Suitable for small batch foundry and workshop applications. Technical details Type: Electric crucible melting furnace Configuration: Vertical cylindrical design Operation: Electric resistance heating Power: Approx. 28 kW (from nameplate) Voltage: Approx. 380 V Frequency: 50 Hz Year: Approx. 1980 Construction: Steel housing with refractory-lined chamber Loading: Manual top-opening lid with central charging access Access: Side tapping / access port and lower service hatch Application: Batch melting of non-ferrous metals Equipment - Refractory-lined melting chamber - Manual lid system - Side tapping port - Industrial steel structure Condition and remarks Used industrial furnace. External wear and oxidation visible. Internal  ...

General description Industrial gas-fired furnace with refractory-lined chamber, designed for heating, preheating, or thermal processing operations in workshop or foundry environments. Technical details Type: Industrial combustion furnace Configuration: Vertical furnace body with insulated housing Heating system: Gas burner system (MAGRA) Fuel: Likely natural gas or propane Chamber: Refractory-lined (firebrick interior) Exhaust: Chimney / flue connection Burner: MAGRA gas/air control unit (Gas/Luftabschneider) Application: Heat treatment, preheating, burn-off processes, or auxiliary foundry use Build period: Approx. 1980–2000 (estimated) Equipment - Furnace body with refractory lining - Gas burner system (MAGRA) - Exhaust stack connection - Insulated steel housing Condition and remarks Used industrial unit. Shows heavy wear including soot deposits, oxidation, an ...

RAUCH ZSO450E – Zinc Melting Furnace General data: Manufacturer: Rauch Model: ZSO450E Serial number: 7069 Year of manufacture: 1993 Machine type: Zinc melting furnace Condition: Defective – requires new crucible and maintenance Technical details: Heating output: 57.6 kW Voltage: 380 V Nominal temperature: 450 °C Additional equipment: Tilting device (Rauch) Serial number: 7167 Year of manufacture: 1993 Control system: defective Description: Industrial zinc melting furnace designed for foundry applications. The unit includes a tilting mechanism for material handling. Currently not operational and requires refurbishment, including replacement of the crucible and maintenance work. Auction-ID: A7-48441-4

Heating capacity 2 x 35 kW, circulating air volume 2 x 12,000 sqm/h,The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be inquired by the buyer himself Auction-ID: A1-48512-16

Melting and holding furnace StrikoWestofen MH II-T 6000/3500 G-eg, built in 2021, heating capacity 2,600 kW, capacity 6,000 kg, melting capacity 3,500 kg/h, max. melting pool temperature 760°C, max. furnace room temperature 1,050°C, height approx. 8,043 mm, with Striko K2000E feeder, built in 2021, with elevator for transport boxes

Electrode furnace: Capacity 5 Kg Inner dimensions (LxWxD) 100 x 75 x 450 mm Power 0.4 kw Connection voltage 220 - 240 V Adjustment device 30 - 180 degrees Weight 10 kg Dimensions L x W x H 570 x 200 x 150 mm Condition: never used / new (5) Auction-ID: A7-48486-158

Melting furnace ZPF Therm ST-G3 T 10 CHHTETWWK, built in 2012, loading weight 9,000 kg, with loading lift (No. ZPF Therm 2), plus processing platform, 2 slag storage tanks, preheating chamber for aluminium ZPF VWK5.2, built in 2012, heated by waste heat, with chimney

Electrode furnace: Capacity 10 Kg Inner dimensions (LxWxH) 135 x 80 x 480 mm Power 0.5 kw Connection voltage 220 - 240 V Adjustment device 30 - 180 degrees Weight 15 kg Dimensions L x W x H 600 x 250 x 200 mm Condition: never used / new (5) Auction-ID: A7-48486-176

1 piece gas-heated chamber furnace with air circulation and hearth trolley Type: KLWg 220/180/650 Gas-heated chamber furnace for unsupervised operation, designed for three-phase three-phase current 400 volts / 50 Hz. Suitable for temperatures up to 700°C and for natural gas \"H\". Technical data External dimensions approximately: Width: 3400 mm Width with control cabinet: 3800 mm Height: 3200 mm Length with retracted hearth carriage: 8000 mm Length with extended hearth carriage: 15500 mm Interior clear dimensions approximately: Width: 2400 mm Height above beams: 1800 mm Length: 6500 mm Volume: 25.7 m³ Max. batch dimensions approximately: Width: 2000 mm Height: 1500 mm Length: 6100 mm Max. weight: 20000 kg Equipment / Execution 4 Rule groups 8 burners Total burner power: 720 kW Burner air blower: 5.5 kW Circulating motors: 4 x 22 kW Bogie hearth dri ...

- 2 electric induction melting furnaces, with cylindrical steel body, tilting, capacity 12000 kg each, are included. - Approximate joint production capacity: 70,000 kg per 8-hour work shift. - For smelting iron at a maximum temperature of 1480 °C. - 2 URBAR RBA 90-100/560 feeder trolleys. - 2 PAWELS TS transformers: year of manufacture 2007, power 4850 kVA each. - Cooling installation with pumps and plate heat exchanger. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-48166-6

The boogie heart furnace consists of two charging cars mounted on rails, a main frame with insulation, a post-combustion chamber, and a forced-air cooling system. Rated voltage 3/N/PE 400/230 V AC 50 Hz Connected power 220.8 kVA Rated power 160 kW Max. current 232 A Internal usable dimensions (W/H/D) 1500x1500x2100 mm IP40 protection Heating power (nominal burner output) 12.5–50 kW (min/max) Max. furnace temperature - Tp max 1300 °C Operating furnace temperature 1200 °C Fuel: natural gas (calorific value 10.35 kWh/m³) More technical details in attached pdf. Upon agreement with the buyer, the seller may offer, for an additional fee, the dismantling of the equipment, loading, transport, and commissioning at the buyer’s site. Auction-ID: A7-40556-10

Vacuum Glass Chamber Exikator Glass The glass cylinder and glass lid can be used to test reactions as well as the behaviour of a wide variety of liquids/substances/products under vacuum. Easy handling and operation Many connection possibilities volume of 13.9 liters Good and easy cleaning possibilities weight 14.5 KG Areas of application: Labore e.g. for reaction tests under vacuum production e.g. drying of components universities e.g. for preliminary research e.g. design of plastic vacuum glass chamber exiactor glass possible supply/variants: Development Various sizes of the glass vacuum chamber available A widerange of pumps available for vacuum generation heating plate vacuum flowthroughs adaptations vacuumdata for the glass chamber From safety glass seal made of Viton glass lid, it is easy to removable joint plastic inserts for a safe stand leakage rate less than 0.1 L/s external ...

Esta Eurosog W/H 80.299 Industrial vacuum cleaner As a powerful industrial vacuum cleaner, the EUROSOG-W is suitable for coarse, dry, fine and free-flowing dusts. The AC version is designed for sporadic use during cleaning work in workshops. Its smooth-running rollers provide the industrial vacuum cleaner with a high degree of mobility. The spacious dust collection container has a capacity of 80 litres. Thanks to the patented tipping device, the dust can be disposed of effortlessly. Areas of application for EUROSOG industrial vacuum cleaners: AC version for sporadic use For dry, coarse and fine dusts For cleaning processing machines For general cleaning work (e.g. workshop floors) Can be used in many industries (e.g. wood and metal industry) Metal industry Construction industry Wood industry Chemical Printing industry Flocculation industry Cleaning industry Ha ...

; ready for operation

Claw vacuum pump dry compression Manufacturer: Busch Type: Mink MM 1402 AV Motor: DS 400V suction power: 400 m3/h Final pressure: approx. 200 mbar (abs.) Zubehoer: Operating instructions delivery time: by arrangement; ready for use

Rotary vane vacuum pump oel circulation lubricated Performance: 12 months Manufacturer: Becker Type: U 4.250 SA/K motor: DS 400V suction power: 250m3/h final pressure: 3 mbar (abs.) . Generalueberholt Zubehoer: Oelfilling (Mineraloel) Delivery time: by arrangement Further details or technical advice via request; ready for use

Rotary vane vacuum pump Manufacturer: Leybold Type: Trivac D25 BCS Cat No.: 11879 Suction power: 25m3/h End pressure: approx. 0.005mbar engine: 400V Ds Please send us your pump request as a request; ready for use

Leybold pump level Data on pump level: RUTA - Pump system RUTA 1001 (20900895586) (02209= Pre-pump: Leybold Sogevac SV300 Cat: 109 31 booster pump: Leybold Ruvac WAU1001 Kat: 11741 Condition: The pump level is completely cleaned and repainted and tested according to the manufacturer's specifications and is 100% fine, without oil leak Performance: 3 months 22x SV300 +WSU1001H are available! There are 10x SV300 + WAU1001 verguegable! ; ready for use

LEYBOLD pump level data to the pump status: RUTA - RUTA 1001 (20900895586) Pumpenystem (= 02209 Backing pump: LEYBOLD Sogevac SV300 Cat: 10931 Booster pump: Leybold Ruvac WAU1001 Cat: 11741 Condition: to see in Picture 3-6. The pump stand is completely clean newly painted and serviced in accordance with the manufacturer's specifications and tested and is 100% right, no oil leak Warranty: 3 months There are 2 x SV300 + WSU1001H available! There are 10 x SV300 + WAU1001 verguebar! Price refers to 1 PCs.; ready for operation

Claw vacuum pump Compressing dry Manufacturer: Busch Type: Mink MM 1402 AV Engine: DS 400V Suction power: 400 m ³/h Discharge pressure: approx. 200 mbar (abs.) Accessories: inlet filter; Operating instructions Delivery time: Please enquire; ready for operation

Roots blowers Manufacturer: Leybold Type: RUVAC WSU 2001 Cat.-No.: 11741 Suction capacity: approx. 2000 m ³/h Status: Rebuilt Warranty: 12 months (image); ready for operation

; ready for operation

Rotary vane vacuum pump Oelumlaufgeschmiert warranty: 12 months Manufacturer: Becker type: U 4,250 SA/K Engine: DS 400V Suction power: 250 m ³/h Discharge pressure: 3 mbar (ABS.) Status: very good condition. Reconditioned Accessories: oil (petroleum) Delivery time: Please enquire Further details or technical assistance like via request; ready for operation

Rotary vane vacuum pump Status: Generalueberholt; Asgood Performance: 12 months Lierfertime: from stock Manufacturer: Busch Type: R5 RA 165D Engine: 400V equipment: Mineraloel o. Syntetisches Oel Nominal suction systems: 160m3/h end pressure: 0.5 mbar (abs .) Oil filling (mineral oil); Vacuum suction filters delivery time: from stock (intermediate sale reserved) If you have any questions about vacuum technology, we are happy to provide you with information; ready for use

Vacuum station with 2 Busch vacuum pumps. Very little run!

Vacuum lifter, vacuum lifter from Schmalz for heavy plates with new suction rubber Load capacity 150kg horizontally and vertically Vacuum cleaner can be swivelled 90 degrees motorised Suction box 1000 x 675mm Acoustic warning signal in case of too low vacuum 400V, 1.5kW Can be attached to on-site chain hoist CE mark No test book available Vacuum cleaner rubber renewed Mint condition The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Debus DDS 118 / 5/ 23 Chips Industrial Vacuum Cleaner 6 bar 4.6 m³/min Original price 4604,- € Manufacturer: Debus Model No.: DDS 118 Full Name: DDS 118/5/23 Chips Year of Make: 2016 Fabr.-Nr.: 278 Operating pressure: 6 bar Suction power: 4.6 m³/min Air requirement: 1.3 m³/min Weight: approx. 30 kg Capacity: approx. 40 litres Dimensions: 55 cm long, 60 cm wide and 150 cm high Condition: used Scope of delivery: see pictures Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosts. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machines More items - new and used - can be found in our shop! International shipping costs on request!

Vacuum lifting device for paper rolls NAGRON AEROLIFTVacuum lifter for the paper industryWoudenberg Holland type R96-20Fabr. No. 9745 Year of construction 1999Load capacity 2000 kgCentering mandrel 90 mmSuction surface Outer diameter 850 mm (plus seal)Suction surface Inner diameter 250 mm (minus seal)Sealing width 50 mmSuction surface 0.5 m2Vacuum min. -800 mbarPumping speed approx. 100 m³/h per vacuum pumpMotor power 2x 2.2 kWNet connection 400 Volts, 50 Hz- 2 pieces Rietschle

Vacuum lifting device, vacuum lifterCustom-made as a handling device for an industrial robotYear of construction 2008Load capacity approx. 60 kgSuction foot spacing min. 120 x 150 mmSuction foot spacing max. 700 x 600 mm- 4 suction feet 100 mm- 4 vacuum ejectors, vacuum generator PIAB with compressed air connection 8 mm - 2 pieces cross member, adjustable in width via servo drive from 150-600 mm- suction foot spacing via 2 servo drives adjustable from 120-700 mm- suction cup adjustment via 3 pieces of servo motors REXROTH MSK040C-0600-NN-M1-UP0-NNNN- Very elaborate and