vacuum dryer used for sale

Description: Serial number 140020318 , Volume flow 2500 l/min Approx. Onsite Dimension. (l x w x h): 500 x 450 x 850 mm, weight approx.: 40 kg

Description: 230 volt, 50-60 hertz, 2.1 kW Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,500 mm, weight approx.: 50 kg

Offer 19301 Specifications: - Operating pressure 16 bar - Inlet capacity up to 17 m³/h - Refrigerant R 134 A - Drive 400 V / 2.52 kW - Space requirement approx. W 860 x H 2200 x D 1300 mm - Weight approx. 700 kg

Description: 230 Volt, 50 /60 Hz, 2.1 kW Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,600 mm, weight approx.: 50 kg

We offer Adsorption dryer 1 Kaeser DC 75 E YOC 2016 6-16 bar Bid 1-5 The system is part of a compressed air system in a production hall. It's needed. Built in 2016, and fully functional in very good condition and is offered - due to the restructuring of the hall use at our customer. The compressed air tank is not part of the offer. However, it can also be sold individually or purchased with the system. specifications: - Manufacturer: Kaeser Coburg - Model: Adsorption dryer DC 75e with 2 desiccant tanks Year:2015 - Volume: 133 l - Filling weight: 100 kg - Adsorption Center: Activated Aluminum Oxide Al2O2 - P0 & PS 0/16 bar - TO -10/+66 °C - TS +70°C - PT 26.1 bar - Year of construction: 2016 - Machine No.: 9,5486,20010-1037 - Operating hours: - will be added - Max operating temperature air: 0° C - Ambient temperature 2 - 45°C - DL Inlet temperature min/ ...

Manufacturer: Tennant Type: 7300 Condition: used

Description: 230v 260rPM 1200m3/min speed adjustable construction kit emergency stop casters with brake 6 blades 950w Approx. Onsite Dimension. (l x w x h): 1,900 x 600 x 2,000 mm, weight approx.: 46 kg

Dyson hand dryer, type: airblade DB, dimensions: 300 mm x 250 mm x 650 mm.

SMC air dryer with pressure vessel, volume: 300 liter, dimensions dryer: 860 mm x 300 mm x 620 mm, dimensions pressure vessel: 500 mm x 500 mm x 1900 mm.

Dyson hand dryer, type: airblade DB, dimensions: 300 mm x 250 mm x 650 mm.

Ride-on scrubber dryer, scrubber dryer, floor cleaning machine, mop machine, floor cleaner -Manufacturer: Hako, scrubber dryer with traction drive -Type: Scrubmaster B30 -Voltage: 24 V / 1.1 kW -Battery: 2x Hoppecke 12 V 80 Ah, see photo -Dimensions: 1250/780/H1100 mm -Weight: 151 kg

Description: max. working pressure: 10 ,bars rated ,power: 5,5 kW working hours total: approx. 1492 hrs working hours under load: approx. 531 hrs time left till maintenance: approx. 1508 hrs Please note: compressors are delivered free of liquids, media, oils and fluids inside! suction capacity: 5.5 kW, operating pressure: 10 bar, modelname / number: AIRCENTER SM 10, year of manufacture: 2,022, Approx. Onsite Dimension. (l x w x h): 630 x 594 x 1,716 mm, weight approx.: 410 kg

Description: rated power: 30 kW air flow: 5700 l/m working hours: approx. 15917 hrs. working hours under load: approx. 13771 hrs. max.working pressure : 8 bars time left to regular maintenance : 3000 hours regulary maintained service manual: not available Please note: compressors are delivered free of liquids, media, oils and fluids inside! flow rate: 5700 l/m, suction capacity: 30 kW, operating pressure: 8 bars, modelname / number: ASD 57 T, year of manufacture: 2,005, Approx. Onsite Dimension. (l x w x h): 1,850 x 921 x 1,505 mm, weight approx.: 745 kg

Description: Machine number 25.500-1038 Year of manufacture 06.2015 max. pressure 16 bar Power consumption 11 kW Delivery rate 25,500 l/min Refrigerant R 404 Air connection 3 inch Pre- and after-filter fitted Please note Refrigeration compressor and fans are running, The refrigeration circuit has a leak, The machine is sold as defective Approx. Onsite Dimension. (l x w x h): 1,700 x 740 x 1,480 mm, weight approx.: 273 kg

Description: Machine number: AIQ 703540 max. pressure 14.5 bar Power consumption 4.55 kW Refrigerant 404 A Air flow rate 22,800 l/min Approx. Onsite Dimension. (l x w x h): 1,170 x 950 x 1,150 mm, weight approx.: 305 kg

Description: Machine number 11N020531/11 Air flow rate 18,000 l/min Energy-saving design Max. pressure 14 bar Power consumption 2.1 kW Refrigerant 407 C Compressed air connection flange DN80 Condensate separation by BEKOMAT With long connection cable and operating instructions Approx. Onsite Dimension. (l x w x h): 1,100 x 880 x 1,800 mm, weight approx.: 245 kg

Description: Machine no.: CAQ 376305 max. pressure 13 bar Power consumption 3.15 kW Delivery flow rate: 17,200 l/min Refrigerant:410A Refrigeration dryer fits Atlas Copco GA 90 or Atlas Copco GA 7 Approx. Onsite Dimension. (l x w x h): 1,010 x 740 x 730 mm, weight approx.: 170 kg

Description: Power consumption: 1,400 W Delivery rate: 13,000 l/min Refrigerant: R 407C Approx. Onsite Dimension. (l x w x h): 610 x 630 x 1,030 mm, weight approx.: 96 kg

Description: Attachment dryer type THD25E, tank dimension: diameter about 340 mm x 430 millimeters , Suction conveyor type TAL300 NE weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 800 x 800 x 2,100 mm

Description: container diameter 350 x 440 mm , on rack trolley Approx. Onsite Dimension. (l x w x h): 800 x 800 x 1,600 mm, weight approx.: 40 kg

die Steuerung ist vorbereitet für Kompressor-Gleichlaufsteuerung. inkl. · Drucktaupunkt-Steuerung ·Mit einer Drucktaupunkt-Steuerung können Sie den Trockner im starren oder variablen Zyklus betreiben. Im starren Zyklus erfolgt die Umschaltung nach einer festgelegten Zeit (in der Regel nach 5 Minuten). Im variablen Zyklus erfolgt die Umschaltung abhängig vom erreichten Drucktaupunkt und der Beladung des Trockenmittels. Die Adsorptionszeit im variablen Zyklus beträgt maximal 60 Minuten. Neugerät Achtung: Das Gerät wird ohne Vor-, und Nachfilter geliefert. Ein Vorfilter ist dringend erforderlich, falls nicht schon vorhanden.. Siehe Optionen unten. (Bild: Katalogbild)

die Steuerung ist vorbereitet für Kompressor-Gleichlaufsteuerung. inkl. · Drucktaupunkt-Steuerung ·Mit einer Drucktaupunkt-Steuerung können Sie den Trockner im starren oder variablen Zyklus betreiben. Im starren Zyklus erfolgt die Umschaltung nach einer festgelegten Zeit (in der Regel nach 5 Minuten). Im variablen Zyklus erfolgt die Umschaltung abhängig vom erreichten Drucktaupunkt und der Beladung des Trockenmittels. Die Adsorptionszeit im variablen Zyklus beträgt maximal 60 Minuten. Neugerät Achtung: Das Gerät wird ohne Vor-, und Nachfilter geliefert. Ein Vorfilter ist in den meisten Fällen dringend erforderlich. Siehe Optionen unten. (Bild: Katalogbild)

Description: 700 l/min 0.22 kW 16 bar Approx. Onsite Dimension. (l x w x h): 540 x 280 x 680 mm, weight approx.: 70 kg

Description: Professional 650 watt construction dryer Recommended room size 40 - 50 m², height max. 2.6 m Sound pressure level approx. 52dB Dehumidification capacity 28 L/D - 51 L/D Power 650 watts Tank volume 5.5 l Length 515mm Width 430mm Height 825mm Machine weight approx. 36 kg Approx. Onsite Dimension. (l x w x h): 515 x 430 x 825 mm, weight approx.: 36 kg

Crates and pallet washing machine, built in 2012, high hourly output The crate washing machine has an integrated dryer, neat facility The plant is no longer needed due to restructuring. The software of the control system is damaged and must be repaired before it can be put back into operation.

Description: Max. working pressure: 11bar For more technical details please also take a look at the attached PDF documents. Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 2,800 mm, weight approx.: 4,000 kg

Description: 7.5 kW compressor Max pressure 10 bar Air dryer 0.475 kW Air tank 500 LT Working hours 2878.17 model: RLR 900 TF/500B, Approx. Onsite Dimension. (l x w x h): 1,900 x 900 x 1,700 mm, weight approx.: 331 kg

Manufacturer : Firlabo Model: FI727B Manufacture: May 2001 Type: Incubator / forced convection drying oven Volume : 727 L Power : 3,000 W Temperature: 7 - 65?C 304 stainless steel chamber PID controller Model on wheels

Manufacturer: Usifroid Usifroid Reference : SMJ 100 FPI Type : freeze dryer Number of trays : 2 Surface area per tray : 100 cm x 50 cm 2 air compressors 1 refrigeration unit : R22 and 502 1 circulation pump 1 heating system Missing parts : Hydraulic unit Vacuum pump

Approx. Onsite Dimension. (l x w x h): 1,500 x 700 x 1,500 mm, weight approx.: 350 kg

Description: Volume flow m³/min: 0,80 Pressure loss refrigeration dryer bar: 0,15 Electrical power consumption at 100 % vol. : 0,19 Overpressure bar: 3-16 Dimensions W x D x H: 386 x 473 x 440 mm Compressed air connection: G ½ / Condensate drain connection: G ¼ Electrical supply: 230 V / 1 Ph / 50 Hz Mass of refrigerant R-513A: 0.21 kg Mass of refrigerant R-513A as CO2 Equivalent t: 0.13 Hermetic refrigeration circuit is available. - Special cooling air duct / - Powerful refrigerant condenser - High-quality refrigerant compressor / - Strain-relieved condensate line Use up to 50°C ambient temperature! In mint condition ATTENTION: it is expressly noted that this lot only corresponds to the scope of the lot description. If objects can be seen on the photo, which are not explicitly stated in the lot description, they are not part of the sale. Of course, this also applies to tools, addi ...

Description: • Screw compressor with built-in air dryer • Serial number  ,AII 237101 • Motor power 22 KW-3000 rpm • Maximum working pressure 7.50 bar • Air flow 3600 l/min • ATLAS COPCO ID 60 built-in air dryer Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,160 mm, weight approx.: 480 kg

Description: • Air blade air, evaporation tunnel • Serial number 6176  ,• Total installed power 3.45 KW • Maximum passage width approx. 1400 mm • Maximum passage height approx. 80 mm • Tunnel length 3000 mm • Heating power 56000 Kcal/h Approx. Onsite Dimension. (l x w x h): 3,500 x 2,600 x 2,380 mm, weight approx.: 2,000 kg

Description: Voltage 330 volts, power 1.6 kW, without documentation and CE certificate Approx. Onsite Dimension. (l x w x h): 500 x 800 x 1,000 mm, weight approx.: 90 kg

Description: Voltage 230 volts, power 2.1 kW, without additional accessories, with CE certificate Approx. Onsite Dimension. (l x w x h): 700 x 600 x 1,000 mm, weight approx.: 250 kg

Description: KAESER SK 25 T with integrated air dryer ABT 25 working pressure: 8 bar air flow: 2100 l/min rated power: 15 kW working hours: approx. 20300 h  , SK – Long-Term Savings discerning compressed air users expect maximum availability and efficiency, even from smaller compressors it will come as no surprise therefore that Kaeser’s SK series rotary screw compressors go far beyond meeting these key expectations not only do they deliver more compressed air for less power consumption, but they also combine ease of use and maintenance with exceptional versatility and environmentally responsible design the SIGMA CONTROL 2 ensures efficient control and system monitoring. The large display and RFID reader provide effective communication and maximum security multiple interfaces offer exceptional  , flexibility, whilst the SD card slot makes updates quick and ...

Description: Refrigeration system: Refrigerant R404/A Capacity 15.8 kg Ts= -10 to + 125 °C Ps= 35 bar HP Ps= 20 bar LP Air system: Ts= -10 to + 60 °C Ps= 16 bar Approx. Onsite Dimension. (l x w x h): 1,400 x 1,350 x 2,250 mm, weight approx.: 610 kg

Description: serial number: TH371CES4000607026 refrigerant: R404 a / 12 kg Approx. Onsite Dimension. (l x w x h): 1,287 x 1,270 x 2,162 mm, weight approx.: 600 kg

Description: Belt width: 800mm Inlet height: 50mm Sections: 1st heating 2. heating 3. ventilation 4. cooling Approx. Onsite Dimension. (l x w x h): 10,000 x 1,400 x 1,200 mm, weight approx.: 4,500 kg

Description: Power: 52,000W Belt width: 1.100mm Inlet height: 50mm Sections: 1. heating 2. heating 3. ventilation 4. cooling (only with external air conditioning) Machine has already been dismantled Approx. Onsite Dimension. (l x w x h): 10,500 x 1,600 x 1,200 mm, weight approx.: 5,000 kg

Description: Number of grids: approx. 750 Grid spacing: approx. 25mm Format: 500mm x 700mm Grates: plastic-coated Output: 8kW Air output warm zone: approx. 1,800m³/h Air output cooling zone: approx. 1,500m³/h Grids for materials: up to 750 Extension: Inlet with photocell for feeding material into the wicket Automatic destacker Maintenance work in 08.2022: renewal of all ball bearings Sea rings packaging unit Pulleys packaging unit Parts for conversion of chain drive to timing belt drive shaft outfeed wicket (invoice available) Machine has already been dismantled Approx. Onsite Dimension. (l x w x h): 14,000 x 1,400 x 2,800 mm, weight approx.: 5,000 kg

Description: Belt width: 1,100mm Inlet height: 50mm Sections: 1. heating 2. UV drying 3. heating 4. heating 5. cooling (only with external air conditioning) Approx. Onsite Dimension. (l x w x h): 11,800 x 1,600 x 1,200 mm, weight approx.: 4,500 kg

Description: 2 warming zones: max. 80°C 2 cooling zones Belt width: 800mm Inlet height: 60mm Sections 1. ,heating 2. ,heating 3. heating 4. cooling Machine has already been dismantled Approx. Onsite Dimension. (l x w x h): 11,400 x 1,500 x 800 mm, weight approx.: 2,000 kg

Vacuum Glass Chamber Exikator Glass The glass cylinder and glass lid can be used to test reactions as well as the behaviour of a wide variety of liquids/substances/products under vacuum. Easy handling and operation Many connection possibilities volume of 13.9 liters Good and easy cleaning possibilities weight 14.5 KG Areas of application: Labore e.g. for reaction tests under vacuum production e.g. drying of components universities e.g. for preliminary research e.g. design of plastic vacuum glass chamber exiactor glass possible supply/variants: Development Various sizes of the glass vacuum chamber available A widerange of pumps available for vacuum generation heating plate vacuum flowthroughs adaptations vacuumdata for the glass chamber From safety glass seal made of Viton glass lid, it is easy to removable joint plastic inserts for a safe stand leakage rate less than 0.1 L/s external ...

Claw vacuum pump dry compression Manufacturer: Busch Type: Mink MM 1402 AV Motor: DS 400V suction power: 400 m3/h Final pressure: approx. 200 mbar (abs.) Zubehoer: Operating instructions delivery time: by arrangement; ready for use

; ready for operation

Rotary vane vacuum pump oel circulation lubricated Performance: 12 months Manufacturer: Becker Type: U 4.250 SA/K motor: DS 400V suction power: 250m3/h final pressure: 3 mbar (abs.) . Generalueberholt Zubehoer: Oelfilling (Mineraloel) Delivery time: by arrangement Further details or technical advice via request; ready for use

Rotary vane vacuum pump Manufacturer: Leybold Type: Trivac D25 BCS Cat No.: 11879 Suction power: 25m3/h End pressure: approx. 0.005mbar engine: 400V Ds Please send us your pump request as a request; ready for use

Leybold pump level Data on pump level: RUTA - Pump system RUTA 1001 (20900895586) (02209= Pre-pump: Leybold Sogevac SV300 Cat: 109 31 booster pump: Leybold Ruvac WAU1001 Kat: 11741 Condition: The pump level is completely cleaned and repainted and tested according to the manufacturer's specifications and is 100% fine, without oil leak Performance: 3 months 22x SV300 +WSU1001H are available! There are 10x SV300 + WAU1001 verguegable! ; ready for use

LEYBOLD pump level data to the pump status: RUTA - RUTA 1001 (20900895586) Pumpenystem (= 02209 Backing pump: LEYBOLD Sogevac SV300 Cat: 10931 Booster pump: Leybold Ruvac WAU1001 Cat: 11741 Condition: to see in Picture 3-6. The pump stand is completely clean newly painted and serviced in accordance with the manufacturer's specifications and tested and is 100% right, no oil leak Warranty: 3 months There are 2 x SV300 + WSU1001H available! There are 10 x SV300 + WAU1001 verguebar! Price refers to 1 PCs.; ready for operation