vacuum conveyor used for sale

ALPINA TIPPER TIE SW 330 CUTTER AS NEW

Stephan VM60 Vacuum Mixer used with push-button switch, according to the previous owner 20 minutes interval, 4x on, 4x off then must be switched on again Mixed insert made of stainless steel Machine for emptying and operation with low content tiltable Boiler volume: 72 litres Batch sizes: up to 60 litres the machine must be thoroughly cleaned before use, as there are protein deposits inside Dimensions: 84x58x120cm Video about test run available Mixing Tumbler, Tumbler, Vacuum Tumbler, Mixer, Mixing Machine, Mixing Machine

PUC Process Plant VLT 500 A The Probst & Class VLT 500 A is a process plant that is primarily used for homogenization, mixing and comminution in process engineering. Typical applications are the production and processing of products where a very fine and uniform distribution of all components is required, such as in the food, chemical, cosmetics and especially in the lubricating grease industry. Function and properties The VLT 500 A works according to the rotor-stator principle and is capable of being used in both batch and inline operation. Other features include high throughput, flexible adaptation options depending on the processing step and product, and the possibility of setting up complete process lines with different modules (e.g. venting, filtration, pumps). Advantages and special features Very fine homogenization and comminution, even with demanding mixtures. Flexible ...

Height=1.22 m, Overall length= 0.95 m, Overall width= 0.82 m, Net weight= 225 kg,

Height=1.62 m, Overall length= 2.56 m, Overall width= 0.8 m, Net weight= 235 kg,

Height=0.98 m, Overall length= 1.17 m, Overall width= 0.58 m, Net weight= 242 kg,

Height=1.4 m, Overall length= 1.88 m, Overall width= 0.81 m, Net weight= 230 kg,

Height=1.05 m, Overall length= 0.95 m, Overall width= 1.24 m, Net weight= 385 kg,

Height=1.09 m, Overall length= 0.72 m, Overall width= 0.91 m, Net weight= 231 kg,

Ruwac DS2420 G-B1 Industrial Vacuum Cleaner Manufacturer: Ruwac Model No.: DS2420 G-B1 Voltage: 400 volts Motor power: 4 kW 8.3 A Weight: approx. 100 kg DGUV until 2024 Suitable for sucking up more flammable dusts in zone 11 Cracks in the cover More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

A semi-automatic vacuum chamber packaging machine Multivac is available. Chamber dimensions X/Y/Z: 900mm/440mm/160mm, sealing bars: 2x440mm, sealing type: double-seam cut-off sealing, chamber height: 160mm, max. vacuum pump capacity: 150m³/h, machine dimensions X/Y/Z: approx. 1100mm/600mm/1400mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.

A vacuum mixer/homogenizer Olsa for the cosmetics industry is available. Usable volume: 400L, total volume: 470L, vessel diameter: 850mm, vessel height: 730mm, discharge valve diameter: 30mm, inlet nozzle diameter: 25mm, speed: 30rpm, material inside/outside: AISI316/AISI304. Documentation available. An on-site inspection is possible.

Manufacturer: Festool Model: CTM 48 E LE EC/B22 Type: Industrial Vacuum Cleaner / Dust Extractor Tank volume: 48 litres Filter class: M Power: 1200 W Power supply: 230 V Condition: used Location: Bremen

Inv. Num. : 8726 Type: VL 1750 Producer: Koplast Created: 2009 Parameters: Total power: 39.6 kW Length: 3200 mm Width: 2300 mm Height: 2950 mm Weight: 1500 kg Equipment: Technical documentation The machine is equipped with: Digitally controlled top and bottom heating BECKER vacuum system Infinitely adjustable table stroke Manual and automatic control Suitable for plastic molds (PVC/PMMA/PET/PC/ABS...)

Membranpresse modell FISMA 210 (ITALIEN) Arbeitsgröße: mm 2100 x 1200 Öffnung mm 500 Arbeitshöhe mm 250 Öffnen und Schließen des Deckels mit vertikalen Pneumatikkolben Diese Presse eignet sich zum Furnieren von Formteilen wie Fensterflügelrahmen und gebogenen Teilen Oberheizung mit Heißluft Beheizung der Unterseite mit Heißluft Verbrauch approx. 9 kWt Arbeitszyklus: approx. 10 Min. Kompletter Kompressor zum Anheben der Abdeckung und unter der Abdeckung Verarbeitungsvorvakuum einstellbar bis 6,5 atm

Cutter Manufacturer: Kilia Stainless steel Capacity of the bowl: 50 liters 6 knives

Cutter Manufacturer: Baader Stainless steel Capacity: 60 liters 6 knives

Vacuum machine Manufacturer: Röschermatic Double-chamber vacuum packer Dimensions: 470x450x180mm Seal bar lenght: 450mm Pump capacity: 63 m³/h Voltage: 380V / 50Hz

Vacuum machine Manufacturer: Supervac Lid with plexiglass window On wheels with brakes Microprocessor control with vacuum sensor Integral vacuum pump with motor protection Reliable and easy to service Easy to clean Simple to operate Chamber dimensions: 800x730x250mm Seal lenght: 4x 660mm

Cutter Manufacturer: Krämer Grebe Wetter Stainless steel Capacity: 65 liters 2 knife speeds 6 knives Power: 25kW

Frozen block cutter Manufacturer: Magurit Stainless steel Cutting dimensions: maximum cutting size 750 x 480 x 240 mm Motor: 4 kW hydraulic Power: 400 V / 50 Hz Dimensions: 1700 x 1100 x 1850 mm 3 knives

Vacuum machine Manufacturer: Ramon Capacity: 20 m³/h Voltage: 220V / 50Hz Power: 0.75kW

• Dry-running rotary valve vacuum pump • Suction capacity 55 m³/h • Final pressure 150 mbar • Motor power 1.5 kW • Price per pump

HANDTMANN VF 620 Filling, Portioning. Year 2002

Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 240 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Filling pressure: up to 35 bar Portioning speed: up to 380 portions per minute Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.5 KW Machine dimensions in cm: Width: 210 Lenght: 170 Height: 190

10 Meter vacuum tank Leba 225 doorsnede Bs Ud Dswmrhajvycsww

Suction unit: 16, load capacity: 1200kg, crane eyelet: 90mm/160mm, suction pad diameter: 315mm, suction pad type: P200-50, suction pad swivel: 6°, height compensation: 50mm, number of vacuum gauges: 5, vacuum gauge diameter: 100mm, pump capacity: 25m³/h, vacuum pressure: 850mbar. Machine dimensions X/Y/Z: approx. 8500mm/900mm/1500mm, weight: approx. 720kg. Documentation available. On-site inspection possible.

BFB SHRINKWRAPPER, MODEL 3786 A Automatic shrinkwrapper for cartons, allowing for format flexibility. Documentation available. EC compliant. PRODUCTION Carton format range: 12 – 85 mm; 10 – 85 mm; 65 – 250 mm Bundle format range: 70 – 300 mm; 25 – 150 mm; 65 – 250 mm Machine size: 2750 x 1500 x 1900 mm (approx)

General SKU381X1303 LocationBarneveld Makebusch TypeRA 0205 D 50l QLXX Mach.No.C0416000133 Pressure Working pressure0.005 Bar Vacuum possiblecheck Main Features MaterialMild steel Volume200000 Ltr. Motor4 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck oil-sealed vacuum pump Number of pumps:1 Capacity200 m³/h With motor4kW 400/690V 1425rpm Inletø 50mm Outletø 65mm Information Year of construction2004 Total height0,42 m CEcheck Floorspace0,9x0,56 m Weight170 kgVacuum pumpsBuschPumps > Vacuum pumpsBrand > Busch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Manufacturer: Meier Vakuumtechnik GmbH Quantity: 2 pieces Model: Vacuum laminator ICOLAM 080 System designation according to the documentation: Vacuum laminator Year of Make: 1997 Conversion: 2002 (controller replacement / connection to control system according to documentation) Feed: 3x400 V/N/PE Supply line: 4 × 25 mm² Control voltage: 24 V DC Degree of protection: IP54 Standard / Regulation: EN 60 204 Location: Schierling (original installation location according to documents: 86919 Utting) Viewing possible by appointment.

GENERAL INFORMATION: Manufacturer: ULVAC, Inc., Japan Model No.: EWA-165 Type: Vacuum Roll Coater (Vacuum Metallizer) Application: Metallization of plastic films (PET/OPP/PE etc.) by aluminum evaporation Useful web width: up to 1650 mm Film thickness range: 12 μm typical.   POWER SUPPLY: Control / Main Units Power supply:  3Φ, 60 Hz, AC 380 V Rated power consumption (cabinet 1):  290 kVA Rated power consumption (cabinet 2):  160 kVA   VACUUM SYSTEM: Main Pumps Oil Diffusion Pump (Ejector type): Model:  ULVAC PBL-20 Power:  18 kW Fluid charge: 90 L Voltage:  380 V Water cooling requirement:  25 L/min (

Vacuum filler VF 608 Handtmann Stainless steel Power: 3kW Voltage: 400 / 50Hz

Cutter Manufacturer: Kramer Grebe Wetter Bowl made out of stainless steel Dimensions: 290x244x210cm Control voltage: 230V Operating voltage: 400V / 50Hz Power: 74kW

Type: K324AC8VA Serial number: S8-00324-0256-18 Year of construction: 2018 Bowl: 325 litre Knife speed: 6 steplessly programmable speeds Bowl: 2 speeds Mixing: 2 reverse mixing speeds Controls: Auto-Command 1500K Vacuum pump: Elmo Rietschle L-BV5, 200 m3/h Compressed air: 6 - 10 Bar Water: 4 - 6 Bar Power: 3 x 400V, 50Hz, 157kW Dimensions: 2600 x 3650 x 1700 mm Weight: 4300 kg Including unloader and BW200 loading device With water counter

Height=1.07 m, Overall length= 1.43 m, Overall width= 1.04 m, Net weight= 598 kg,

Dimensions (L/W/H): 873x470x336 mm Weight: 111 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1174x644x528 mm Weight: 151 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Factory liquidation mask production. Installation 2021, out of service since March 2022. The systems have already been dismantled and ready for delivery. Stationary industrial vacuum cleaner Power 2.2 KW Air flow rate 300 m/min Suction port 40/50 mm Weight 30 kg

The Lutetia Type 3 churn meets the requirements of workshops looking for a higher level of capacity without sacrificing process precision. Thanks to vacuum mixing, marinades penetrate faster and more evenly, improving texture, limiting oxidation and stabilizing yields. This makes the machine ideal for integration into processing lines where regularity, hygiene and speed are paramount on a daily basis. In addition, its useful volume of 2500 L and its capacity of 1400 to 1500 kg make it possible to absorb large batches, while maintaining a homogeneous mixing. Indeed, the geometry of the bowl, combined with vacuum work, promotes the diffusion of brine and reduces cycle times. In addition, the ergonomics of the heights (loading, shaft and under the mouth) facilitate handling, tank feeding and evacuation, which concretely optimizes the flow on the line. In addition, the stainless steel  ...

Fatosa 120L Cutter The Fatosa 120L Cutter is a great asset for professionals looking for a reliable and efficient solution. Indeed, its spacious bowl allows a homogeneous mixture of various materials, whether meat, vegetables or even more delicate preparations. In addition, its fast-turning knife system preserves the texture and freshness of the ingredients, which fully enhances the quality of your products. Secondly, the stainless steel design ensures optimal hygiene, while facilitating cleaning operations. This saves you time and meets the most demanding health standards. In addition, the intuitive control interface allows precise adjustment of the cutting speeds. In this way, you can adapt the fineness of the chopping according to the characteristics of each recipe without losing efficiency. In addition, the ergonomic design reduces the strain on operators, who can quickly access  ...

The Seydelmann K506 AC8 500 L Cutter is a must-have piece of equipment for companies looking for advanced performance in food processing. Indeed, its large capacity tank facilitates the processing of large volumes, which improves the production rate. In addition, its robust stainless steel design ensures outstanding longevity, even under intensive conditions. In addition, its high-performance blades ensure consistent and precise chopping, preserving the texture and quality of the ingredients. This makes this cutter perfectly suited to the requirements of different applications, ranging from meats to vegetables to delicate preparations. In addition, its user-friendly interface offers significant ease of use, reducing the training time required for operators and contributing to better productivity. In addition, the ease of cleaning and accessibility of its main components minimize do ...

TECHNICAL DATA: 01 MOD. / - 1.7 kW 02 MOD. SV 1080 B 001 KRXX - 2.2 kW 03 MOD. SV 1063 B 003 ZZXX - 2.6 kW 01 MOD. SV 1063 B 001 KQXX - 1.7 kW

Cutter Rex Düker Hydro 100, completely in stainless steel, with ejector, bowl capacity 100 litres, Stepless knife speed, mixing gears, Connection 400V, main motor 35kW, weight approx. 1750kg, good used condition, fully functional

Filling machine Vemag Robot 500, Oil change vacuum pump made, without twisting gear, Connection 400V, 6.5kW, dimensions LxWxH approx. 85x60x145cm, weight approx. 410kg, used, older device, but in very good condition, fully functional

MINT CONDITION The robust positive displacement pump of the VT series is designed for continuous operation in the rough vacuum range. Its integrated vacuum regulating valve allows precise adjustment of the operating point. Thanks to self-lubricating sliders, the pump works almost maintenance-free and does not require an oil change. The oil-free operating principle makes them ideal for applications that require a clean environment and need to avoid contamination. In addition, noise-reducing measures ensure a pleasant working environment. Volume flow 50 Hz 25 m³/h Vacuum absolute 50 Hz 150 mbar Power 50 Hz 0.75 kW Sound level 50 Hz 62.0 dB(A) Volume flow 60 Hz 30 m³/h Vacuum absolute 60 Hz 150 mbar Power 60 Hz 0.90 kW Sound level 60 Hz 67.0 dB(A) Weight 26.0 kg with motor

MINT CONDITION Very few operating hours Technical data see Nameplate

MINT CONDITION Very few operating hours Technical data see Nameplate

The T 4.40 DSK is an oil-free combined pressure/vacuum pump for blowing and suction air. It is a robust and durable pump that is designed for continuous operation. This dry-running positive displacement pump works with self-lubricating gate valves made of a graphite composite and requires minimal maintenance. Volume flow 50 Hz 35 m³/h Pressure/vacuum relative 50 Hz ±0.6 bar Power 50 Hz 1.85 kW Sound level 50 Hz 68 dB(A) Volume flow 60 Hz 43 m³/h Pressure/vacuum relative 60 Hz ±0.6 bar Power 60 Hz 2.2 kW Sound level 60 Hz 68 dB(A) Weight 46... 49.5 kg with motor

Vacuum extrusion press 'UNIVERSA' PZG 40-40a with 400 mm Ø and 18.5 kW drive (expandable up to 55 kW). Maximum pressing pressure: 30 bar. Extruder incl. PZSVG 35a pre-press with 15 kW drive. Includes base frame with motor clamping device. In regularly serviced condition; last revision in 2022. Previous use: Production of ceramic roof tiles. Available for an extra charge: vacuum generator and various mouthpieces.

Ekomex Vacuum Mixer -Type: MZ 500V -Power: 9 kW -Capacity: 500 L -Vacuum pump -With vacuum -Two speeds -Right/left rotation -With loading -2 paddle mixers -Power supply: 400V 50Hz -Dimensions: 2100 x 1900 x 2720 mm -Made of stainless steel -Condition: used in very good condition, overhauled, ready to work