vacuum cleaner used for sale

painted steel frame, shock-resistant protective cover, 4 large wheels, folding front cover for easy access to components, ECO mode (automatic 60 °C, approx. 25% less fuel consumption and emissions), control panel with signal and indicator lights, stepless pressure control, fuel tank 18 litres, storage space for gun/lance/hose and nozzles, stainless steel burner boiler 40 kW, 4-pole asynchronous air-cooled electric motor with thermal protection (S1, maintenance-free), fuel level indication, radial crankshaft pump with brass pump head and ceramic plungers, pressure gauge, adjustable working pressure, water softening tank 2 liters, DTS delayed falling stop system, IASF automatic shut-off after 20 min standstill, FLC fuel level control, MLC micro-leakage control, DRP dry-run protection, NCC nozzle blockage check, HBLS LED signals, MCL maintenance control lamp, FPS non-return valve, IBD dela ...

Modern ergonomic design, powder-coated steel frame (corrosion-resistant and robust), high-quality materials (stainless steel combined with double-walled rotomoulded polyethylene, impact and scratch resistant), double lance holder, large rear wheels, height-adjustable push handle (100–110 cm), easy-to-store power cable, radial high-pressure pump with 3 all-ceramic plungers and stainless steel valves (low-vibration and noise-reducing), electric motor with low speed approx. 1450 rpm, automatic start/stop system with delayed switch-off, pressure gauge, coarse dirt filter, pressure regulating valve, detergent injector, operating pressure 30–160 bar, water flow rate approx. 180–1200 l/h, maximum water temperature 40 °C, output approx. 7 kW, voltage 3x 400 V, hose length 10 m, cord length approx. 5 m, dimensions approx. 765 x 530 x 1100 mm, weight approx. 77 kg Auction-ID: A1-40134-296

Empas MCB 1000 – in good condition Only 771 working hours Hot water up to max. 108°C Maximum pressure: 150 bar Water output: 12 litres/min Equipped with water softening system (liquid and electronic) 1000 litre storage tank Fill/Feed Pump: Honda, 620 litres/min Electric start Auction-ID: A1-40134-71

With trolley; 5-6 bar; With compressed air connection Auction-ID: A1-45762-118

No charger, blade width 800mm. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-43

Floor cleaner Buch number 3650-33. S/No 8800-3105. ANR 3031. Auction-ID: A1-45187-118

Vacuum Glass Chamber Exikator Glass The glass cylinder and glass lid can be used to test reactions as well as the behaviour of a wide variety of liquids/substances/products under vacuum. Easy handling and operation Many connection possibilities volume of 13.9 liters Good and easy cleaning possibilities weight 14.5 KG Areas of application: Labore e.g. for reaction tests under vacuum production e.g. drying of components universities e.g. for preliminary research e.g. design of plastic vacuum glass chamber exiactor glass possible supply/variants: Development Various sizes of the glass vacuum chamber available A widerange of pumps available for vacuum generation heating plate vacuum flowthroughs adaptations vacuumdata for the glass chamber From safety glass seal made of Viton glass lid, it is easy to removable joint plastic inserts for a safe stand leakage rate less than 0.1 L/s external ...

; ready for operation

Claw vacuum pump dry compression Manufacturer: Busch Type: Mink MM 1402 AV Motor: DS 400V suction power: 400 m3/h Final pressure: approx. 200 mbar (abs.) Zubehoer: Operating instructions delivery time: by arrangement; ready for use

Rotary vane vacuum pump oel circulation lubricated Performance: 12 months Manufacturer: Becker Type: U 4.250 SA/K motor: DS 400V suction power: 250m3/h final pressure: 3 mbar (abs.) . Generalueberholt Zubehoer: Oelfilling (Mineraloel) Delivery time: by arrangement Further details or technical advice via request; ready for use

Rotary vane vacuum pump Manufacturer: Leybold Type: Trivac D25 BCS Cat No.: 11879 Suction power: 25m3/h End pressure: approx. 0.005mbar engine: 400V Ds Please send us your pump request as a request; ready for use

Leybold pump level Data on pump level: RUTA - Pump system RUTA 1001 (20900895586) (02209= Pre-pump: Leybold Sogevac SV300 Cat: 109 31 booster pump: Leybold Ruvac WAU1001 Kat: 11741 Condition: The pump level is completely cleaned and repainted and tested according to the manufacturer's specifications and is 100% fine, without oil leak Performance: 3 months 22x SV300 +WSU1001H are available! There are 10x SV300 + WAU1001 verguegable! ; ready for use

Auction-ID: A7-45252-16

LEYBOLD pump level data to the pump status: RUTA - RUTA 1001 (20900895586) Pumpenystem (= 02209 Backing pump: LEYBOLD Sogevac SV300 Cat: 10931 Booster pump: Leybold Ruvac WAU1001 Cat: 11741 Condition: to see in Picture 3-6. The pump stand is completely clean newly painted and serviced in accordance with the manufacturer's specifications and tested and is 100% right, no oil leak Warranty: 3 months There are 2 x SV300 + WSU1001H available! There are 10 x SV300 + WAU1001 verguebar! Price refers to 1 PCs.; ready for operation

Roots blowers Manufacturer: Leybold Type: RUVAC WSU 2001 Cat.-No.: 11741 Suction capacity: approx. 2000 m ³/h Status: Rebuilt Warranty: 12 months (image); ready for operation

; ready for operation

Claw vacuum pump Compressing dry Manufacturer: Busch Type: Mink MM 1402 AV Engine: DS 400V Suction power: 400 m ³/h Discharge pressure: approx. 200 mbar (abs.) Accessories: inlet filter; Operating instructions Delivery time: Please enquire; ready for operation

Rotary vane vacuum pump Oelumlaufgeschmiert warranty: 12 months Manufacturer: Becker type: U 4,250 SA/K Engine: DS 400V Suction power: 250 m ³/h Discharge pressure: 3 mbar (ABS.) Status: very good condition. Reconditioned Accessories: oil (petroleum) Delivery time: Please enquire Further details or technical assistance like via request; ready for operation

Rotary vane vacuum pump Status: Generalueberholt; Asgood Performance: 12 months Lierfertime: from stock Manufacturer: Busch Type: R5 RA 165D Engine: 400V equipment: Mineraloel o. Syntetisches Oel Nominal suction systems: 160m3/h end pressure: 0.5 mbar (abs .) Oil filling (mineral oil); Vacuum suction filters delivery time: from stock (intermediate sale reserved) If you have any questions about vacuum technology, we are happy to provide you with information; ready for use

Vacuum lifter, vacuum lifter from Schmalz for heavy plates with new suction rubber Load capacity 150kg horizontally and vertically Vacuum cleaner can be swivelled 90 degrees motorised Suction box 1000 x 675mm Acoustic warning signal in case of too low vacuum 400V, 1.5kW Can be attached to on-site chain hoist CE mark No test book available Vacuum cleaner rubber renewed Mint condition The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Vacuum lifting device for paper rolls NAGRON AEROLIFTVacuum lifter for the paper industryWoudenberg Holland type R96-20Fabr. No. 9745 Year of construction 1999Load capacity 2000 kgCentering mandrel 90 mmSuction surface Outer diameter 850 mm (plus seal)Suction surface Inner diameter 250 mm (minus seal)Sealing width 50 mmSuction surface 0.5 m2Vacuum min. -800 mbarPumping speed approx. 100 m³/h per vacuum pumpMotor power 2x 2.2 kWNet connection 400 Volts, 50 Hz- 2 pieces Rietschle

Vacuum lifting device, vacuum lifterCustom-made as a handling device for an industrial robotYear of construction 2008Load capacity approx. 60 kgSuction foot spacing min. 120 x 150 mmSuction foot spacing max. 700 x 600 mm- 4 suction feet 100 mm- 4 vacuum ejectors, vacuum generator PIAB with compressed air connection 8 mm - 2 pieces cross member, adjustable in width via servo drive from 150-600 mm- suction foot spacing via 2 servo drives adjustable from 120-700 mm- suction cup adjustment via 3 pieces of servo motors REXROTH MSK040C-0600-NN-M1-UP0-NNNN- Very elaborate and

Vacuum lifting device, vacuum lifter FESTOSorld production as a handling device for an industrial robotYear of construction approx. 2008Load capacity approx. 50 kg- 7 pieces suction plate 32 mm (construction intended for 12 pieces)- 16 pieces suction plate 42 mm (construction intended for 20 pieces)- 5 pieces suction plate 60 mm (construction intended for 6 pieces)- a few suction feet are missing, see pictures- swivelling base body for suction surface in 90 angles or flat 180- base body pneumatically swivelling- Very elaborate and precise construction with

Offer 25430 Specifications: - Nominal pumping speed 160 m³/h - Vacuum container VE 350 - 160 350 l - Drive 400 V / 4 kW - Space requirement approx. W 2000 x D 600 x H 1250 mm - Weight approx. 250 kg

Flow rate 100 m³/h, final vacuum 5 mbar, motor power 2.2 kW, 1450 rpm. Serial: 2200640 Estimated weight: 80 kg Approximate dimensions: 800x600x500 mm Auction-ID: A7-44996-51

Vacuum table machine WEBOMATIC Single-chamber machine -NEW- 230 Volt Chamber size: 370x400x130 mm Sealing strip: 1 x 350 mm with pexiglass lid

Kat-No 10-1271 New Container capacity: approx. 15 litres Batch size: 3-10 litres Material: stainless steel V2A 1.4301 Frame construction: mobile Double coat Insulated 3 bar Homogenizer 5.5 kW 500-3000 RPM Agitator 0.5 kW 30 RPM Scraper stirrer 0.18 kW adjustable 10-45 UPM Automatic vacuum control 0.55 kW Lid can be folded manually Display of product temperature Template container left 3 litres for powder components Template container on the right 3 litres for liquid components The price is valid for a process system. For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share ...

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Rietschle vacuum pump CLF 60V 60m3/h, 1400rpm, intake pressure 1 torr, 1.5 KW

Stacking mass (LxWxH)- 16m x 1.4m x 1.6m fully automatic drying via computer Heating capacity - 90 kW Top Condition

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 11-3315 in a very good condition for Cosmetic and Food Stuff Pressure Tanks with Agitator: Total Capacity: 13.320 Litres – capacity for use: 10.000 Litres Manufacturer: Schwarz Year of Construction: 1999 Material: dished bottom and jacket: 1.4539 flange for agitator, spout and cup sleeve for temperature sensor: 1.4539 other Stutzen: 1.4571 insulating jacket and pipe legs: 1.4301 (V2A) Attachments: 1.4404/1.4571 Seals: Viton Operating Instructions available For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Producer: Handtmann Type: VF 50/80 Output: 4 kW Weight: 450 kg Dimensions: Width 525 x length 844 x height 1600 mm Connection: 400V/50 Hz Vacuum filler HANDTMANN typ VF 50/80 - Without loading - MC control - Serving setting from 5 g to 1000 g - Filling pressure up to 55 bar - Portion and turn up to 420 portions / minute - Without calibration gear and without intestinal clamp - Capacity up to 2.600 kg / h - Funnel 80 L Portioning speed: 25 g = 420 portions / minute 50 g = 350 portions / minute 100 g = 250 portions / minute 200 g = 160 portions / minute Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

Cat. No. 12-2450 in a very good condition Manufacturer: Disho Koruma Motor number: 155343 Type: VP 180/3300 Width: 2064 mm Length: 3040 mm Height: 3470 mm Weight: 4200 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

sell used vacuum pump

; ready for operation

Handtmann VF 200 Filling portioning linking MC control Loading device The machine is immediatley available and can be inspected in our facility in Koblenz, Germany.

Manufacturer: BUSCH Type: RC 0025 E501 Capacity: 25 m3/h Vacuum pump BUSCH type RC 0025 E501 Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

; ready for operation

Manufacturer: LOGIPACK Type: TF-XM Power: 2 kW Weight: 210 kg Dimensions: 900 x 650 x 1600 mm Power supply: 400 V, 50/60 Hz -Made of stainless steel -Vacuum + possibility of fumigation -Control MC -Single Chamber 2 trays at the same time -Internal dimensions of the Chamber 400 x 290 x 200 mm -Dimensions of the shell 220 x 140 mm -Internal tool dimensions of 215 x 130 mm -Maximum foil width 430 mm -Pump 40 m3/h Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

; ready for operation

Handtmann VF 80 vacuum filling machine, filling, portioning, linking. The machine is currently in the refurbishing and will be available soon. It can be tested in Koblenz, Germany.

Vacuum filler Robby, filling, portioning, linking, pc control. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

; ready for operation

; ready for operation

; ready for operation

Handtmann VF 50 vacuum filling machine for filling, portioning, linking, MC-control, filling capacity up to 2,600 kg/h, pressure up to 55 bar, 420 port./min, portioning from 5-100.000 g., with linking device. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Karl Schnell emulsifier Power: 9 kW

; ready for operation

; ready for operation