va used for sale

Shark robot vacuum cleaner pictured with station, separate container and accessories. Underside and nameplates in detail photos. Visible signs of use; battery and function not checked. Sold as one lot according to the assigned photos. Function, completeness and contents of closed packaging are not verified. Signs of use and packaging damage may be present. No like-new condition is assured. Auction-ID: A1-52179-77

Design: two-stage, oil-sealed rotary vane vacuum pump of the TRIVAC B series Pumping speed according to nameplate: 8m³/h Final pressure according to nameplate: less than 1x10E-4mbar Gas ballast valve available Suction and Discharge Connection: DN16 ISO-KF Drive motor: AEG, Type AMEB71FY4R3N1Q4, IEC 60034, 1~Mot, No. 300506800008 H, Th.Cl. F(F), IP54, Capacitor CB=16μF/400V, 50Hz 230V 0.37kW, 1400min-1, cos φ 0.93, 218-242V 2.9A, LN 38066008 Oil sight glass available Accessories: Power cord. Auction-ID: A7-52036-74

Pumping system according to the nameplate: BOC Edwards Pumping System GV80/EH1200, Item No NXN698000, MK4, Equipment TCV + Silencer + SBP + Panel, 380V, 3 phases, 50Hz, current see motors, weight 360kg, date of construction March 2008 Dry Runner Backing Pump: Edwards Dry Pump GV Industrial Pump (GV80 DRYSTAR), code A702-12-916, weight 170kg Drive motor GV80: Brook Crompton W-DA112MM-C, 4.0kW, 220-240V delta / 380-415V star, 12.4/7.15A, 2860min-1, 50Hz, cos φ 0.91, IP55, insulation class F, S1, 29kg, thermistors Roots pump: Edwards Mechanical Booster EH1200 (hydrokinetic drive), code NRC6-37-000, weight 150kg EH1200 drive motor: Leroy Somer LS100LT, 3.0kW at 50Hz (380V Delta 6.4A / 230V Delta 11.1A / 400V Star 6.4A / 415V Star 6.7A), 3.6kW at 60Hz (440/460V Star 6.4A), 2850-2880min-1 (50Hz), IP55, Insulation Class F, S1, 18kg Suction Flange Booster: DN160 ISO-F Water-cooled, co ...

Nominal pumping speed: 2050m³/h (50Hz) / 2460m³/h (60Hz) Max. effective pumping speed: 1850m³/h (backing pump 630m³/h) Max. pressure difference continuous operation: 50mbar Motor power: 7.5kW (50Hz) Rated Speed: 3000min-1 (50Hz) Max. permissible Speed: 3600min-1 Pump protection class: IP54 Connection flanges: DN160 ISO-K Integrated pressure compensation line (type WAU) Oil filling gearbox: 4.0l vertical / 2.0l horizontal Oil filling shaft seal housing: 1.8l Leak rate integral: 5x10-4 mbar·l·s-1 Permissible Ambient temperature: 12-40°C Noise level: less than 80dB(A) Air-cooled Weight: 406kg Accessories: Strainer inserted in the suction flange (wire mesh sieve insert). Auction-ID: A7-52036-53

Max. pumping speed: 20m³/h Final pressure: 3x10-2mbar (3Pa), with gas ballast 6x10-2mbar (6Pa) Leakage rate: 1x10-6mbar l/s Power consumption at ultimate pressure: 260W Max. shaft speed: 1,800min-1 Max. back pressure: 0.2bar (overpressure) Intake Flange: DN25 ISO-KF Outlet Flange: DN25 ISO-KF Air cooling via fan Gas Ballast Valve Hour meter Electrical data according to nameplate: 3~ 50Hz 200/380-415V 2.4/1.5A, 3~ 60Hz 200-230/460V 2.4/1.5A Noise level: 55dB(A) Degree of protection: IP20 Ambient temperature operating: 5-40°C Ex marking (internal atmosphere only): II 3G Ex h IIB T4 Gc Certification: CE, UL 61010-1, CSA C22.2 No. 61010-1 Materials: corrosion-resistant polymers and special seals (C-variant) Weight according to nameplate: 25.5kg Accessories: Eye bolt mounted for lifting. Auction-ID: A7-52036-67

Garant tool cabinet: HSK-63A mounts mainly MAPAL tools Auction-ID: A1-52097-39

Capacity: 1,500 L; part of the fermented dairy products production line. Auction-ID: A7-52122-27

Valve Series: VAT 61.3 HV Butterfly Control Valve Nominal diameter: DN200 (8\") Flange: ISO-F on both sides Housing/flap: Aluminium EN AW-6082 Shaft/screws: AISI 316L stainless steel Shaft seal: FKM (Viton) Pressure range: 1x10-8mbar to 1.2bar (abs) Max. differential pressure at the flap (closed): 150mbar Leak rate housing/valve seat: 1x10-9mbar·l/s Max. conductance (N2, molecular flow): 7,800l/s Min. adjustable conductivity: 2.8l/s Type. Closing/opening time: 140ms First Service Cycles: 2,000,000 Max. housing temperature: 150°C Installation position any Drive: Stepper motor with integrated control unit, position control version (Position Only, Basic version) Supply according to nameplate: 24V DC, max. 30W Connectors: POWER/INTERFACE D-Sub 15-pin (plug), SERVICE USB-B LED indicators: POWER, OPEN, CLOSE, ERR Control unit protection class: IP40, ambient temperature 0-50°C Weight accordi ...

Type: Hybrid turbomolecular pump with 5-axis magnetic bearing Rated Speed: 31000min-1 (517Hz) Standby Speed: 15000-31000min-1 Pumping speed N2: 1550l/s (DN200) or 2150l/s (DN250) Pumping speed He: 1650/1800l/s Pumping speed H2: 1100l/s Pumping speed Ar: 1450/2000l/s N2 compression ratio: greater than 1x10E8 Ultimate pressure: less than 6x10E-9hPa Max. backing vacuum pressure N2: 2.9/2.8hPa Outlet Flange: DN40 ISO-KF N2 flush flange: DN16 ISO-KF Water cooling: greater than 60l/h, 15-40°C, max. 7bar Integral leakage rate: less than 5x10E-8hPa·l/s Sound pressure level: less than 47dB(A) Degree of protection: IP42 Max. bake-out temperature: 120°C Vibration level: less than 0.01μm Start-up time: less than 8min Motor according to nameplate: 40Vrms, 1033Hz, 12Arms Weight pump according to nameplate: 58kg Accessories: MAGPOWER adixen control unit (P/N 120917) in 19\" half-bay, pump cable w ...

Peak pumping speed: 100m³/h Ultimate pressure: 6.6x10-3mbar Power consumption at ultimate pressure: 1.6kW Power consumption no-load: 0.5-1.0kW Suction Flange: DN50 ISO-KF Exhaust flange: DN25 ISO-KF Water-cooled, cooling water connection 1/4 NPT quick coupling Cooling water requirement: min. 100l/h Max. cooling water pressure: 7bar (101psi) Noise level: 55dB(A) Interfaces: SPI, RS232/485 Dry Running Multistage Roots Pump Weight: 100kg Electrical data according to device plate: 200/208V triangle, 3-phase/3-wire, full load current 12A, 50/60Hz Version Ed. V3.5 Accessories: Handheld control unit adixen with spiral cable, P/N 112970, connected to the unit. Chassis with castors and pull handle. Auction-ID: A7-52036-45

Flow rate at atmospheric pressure: 6l/min Ultimate vacuum: 100mbar abs. Operating overpressure: max. 2.4bar (g) Hose connection: ID 4mm Wetted materials: PPS pump head, EPDM diaphragm, FPM valves Permissible gas and ambient temperature: +5...+40°C Mains: 230V AC, 50Hz Motor power P1: 60W Current consumption according to nameplate: 0.65A Mains fuse: T 1.0A With thermal switch Motor Rating: IP20 Single-headed, dry-running diaphragm pump, 100% oil-free Weight: 1.9kg Accessories: Blue push-in connector and white plastic hose nozzle screwed into the connectors of the pump head. Auction-ID: A7-52036-88

Type according to nameplate: TW 300, 100 CF, water Intake flange: DN100 CF (metal sealed) Cooling: Water cooling, cooling block mounted with two hose connections Mounted frequency converter TURBO. DRIVE S with heat sink, interfaces RS485 (X5) and REMOTE (X1), address selector switch, LEDs ERROR/POWER/STATUS Connections PURGE/VENT Connection cable (Lapp Ölflex) with circular connector, length approx. 4.40m Accessories: Frequency converter TURBO. DRIVE S with heat sink mounted on the pump housing, short connection cable converter-pump connected. Grey connection cable (Lapp Ölflex) with circular connector, approx. 4.40m. Water cooling block with two hose connections mounted. Red protective cap on the intake flange. Auction-ID: A7-52036-38

Pumping speed: 32100l/min (approx. 1926m³/h) Ultimate pressure: 7.5x10-4Torr (1.0x10-3mbar) Power supply: 3~ 380V 50Hz (nameplate), sticker on AC380V 50/60Hz electrical box Booster Motor: 3~, 2-pole, 6HP Dry Pump Motor: 3~, 2 pole, 20HP Suction Flange: ISO160 Outlet Flange: NW50 Cooling water: 8l/min (2-3bar), max. 26°C inlet Weight: 1000kg Roots Pump (Booster): Hanbell PR1800, No. B8715AC00460 Screw Dry Pump: Hanbell PD500, No. B8747AC00153 Frequency Inverter Booster: Delta VFD13AMS43ANSAA (7.5HP/5.5kW) N2 purge gas with flow sensor Daybreak KTF4822-3-1-100-1-S (0-100l/min N2, 0-5V) and pressure gauge Interfaces: RS485, Control Signal, LCD Connectors, Moxa NPort 5130 Serial Device Server Main Switch: Fuji Residual Current Circuit Breaker EW100EAG 75A Emergency stop button (EMO) Accessories: Hanbell control panel with display, mounted and connected to the device. Power connection cab ...

Garant tool cabinet: HSK-63A mounts mainly MAPAL tools Auction-ID: A1-52097-47

Peak pumping speed: 95m³/h (50Hz) / 112m³/h (60Hz) Typical final pressure without purge gas: 1x10-2mbar (50Hz) / 9x10-3mbar (60Hz) Max. final pressure without purge gas: 3x10-2mbar (50Hz) / 1.5x10-2mbar (60Hz) Final pressure with 35SLM N2 flush: 9x10-2mbar (50Hz) / 5x10-2mbar (60Hz) Motor rated power: 1.5kW Power consumption at ultimate pressure: 1.3kW (50Hz) / 1.5kW (60Hz) Suction Flange: DN50 ISO-K/KF Exhaust flange: DN40 ISO-KF Water-cooled, cooling water connection 1/4 NPT quick coupling Cooling water requirement typical: 1l/min N2 flush connection available (P version) Integrated silencer SEMI S2 Weight: 243kg Mains connection according to the manufacturer either 200/208V, 230/240V, 400/415V or 460/480V, 3-phase, 50/60Hz Sticker on the device: 200 - 208 V Accessories: Power cord with twist-lock plug, clamp on the nozzle. Auction-ID: A7-52036-43

Floor nozzles, brushes, containers and other vacuum cleaner parts shown. Compatibility and function not verified. Sold as one lot according to the assigned photos. Function, completeness and content of closed packaging are not verified. Traces of use and packaging damage may be present. No like-new condition is assured. Auction-ID: A1-52179-107

Type: dry-running diaphragm vacuum pump/compressor of the LABOPORT series Voltage: 230V, 50Hz, 1.5A Power consumption: 0.245kW Max. overpressure: 1.0bar Device fuse: T3.15A Equipment: two pump heads with plastic connection sockets, carrying handle, power switch, housing with side ventilation grilles Accessories: Power cord. Auction-ID: A7-52036-86

Design: two-stage, oil-sealed rotary vane vacuum pump Case label: Edwards \"5 Two Stage\" Drive motor: Brook Crompton, Doncaster England, BS 5000-11, Type BS2208, Cat. No. D52231, 220-240V, 1-phase, 50Hz, 2.8A, 180W (0.24HP), 1425min-1, insulation class B, IP 44, max. ambient temperature 40°C, TEFV, Made in U.K. Suction nozzle with small flange Oil sight glass and gas ballast valve available Carrying handle Accessories: Edwards in-line valve/shut-off unit with small flange connections and clamping ring, mounted on a plastic base and connected to the pump via a cable. Power cord with IEC plug. Auction-ID: A7-52036-78

Capacity: 1,500 L; stainless steel, double walled, part of the fermented dairy products production line. Auction-ID: A7-52122-24

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/ELpZ9Od29jA - Former Linde full-service device - Service valid until 07/2027 - UVV valid until 07/2027 - Battery: 23/06/2023 48V 5PzS 625Ah, voltage measured at rest at 50.8V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd + 4th valve; fork adjuster with side shift - Side fall-out protection (very easy to dismantle) - white non-marking tires - LED front work light - LED work light at the rear - StVZO lighting with turn signals for road approval - Safety light at the rear - Safety light at the front - Comfort seat with lumbar support and seat heating Auction-ID: A1-51819-187

Valve Series: VAT 65.0 Spherical Valve Control System (Control & Globe Valve) Nominal Diameter: DN160 (6\") Flange: ISO-F on both sides, 8x M10 Housing/plate: Aluminium EN AW-6082, bare Seals: FKM (Viton) Pressure range: 1x10-8mbar to 1.2bar (abs) Leak rate housing/valve seat: 1x10-9mbar·l/s Max. differential pressure at the plate: 1,200mbar (both sides) Max. differential pressure when opening: 10mbar Conductivity (molecular flow): 5,000l/s Min. adjustable conductivity: 5l/s Throttle time: 0.8s Type. Closing/opening time: 3s/4s Compressed air: 4-7bar Cycles to first service: 1 million (closed) / 200,000 (close/open) Max. housing temperature: 120°C, ambient max. 50°C Installation position any Drive: Stepper motor with encoder, drive type 342943 (Lot No. 26092, Barrel No. 20) Integrated pressure regulator: Basic version, Profibus interface, 1 sensor input (0-10V) Power supply: 24V DC ± ...

Type: Hybrid turbomolecular pump with 5-axis magnetic bearing Rated Speed: 31000min-1 (517Hz) Standby Speed: 15000-31000min-1 Pumping speed N2: 1550l/s (DN200) or 2150l/s (DN250) Pumping speed He: 1650/1800l/s Pumping speed H2: 1100l/s Pumping speed Ar: 1450/2000l/s N2 compression ratio: greater than 1x10E8 Ultimate pressure: less than 6x10E-9hPa Max. backing vacuum pressure N2: 2.9/2.8hPa Outlet Flange: DN40 ISO-KF N2 flush flange: DN16 ISO-KF Water cooling: greater than 60l/h, 15-40°C, max. 7bar Integral leakage rate: less than 5x10E-8hPa·l/s Sound pressure level: less than 47dB(A) Degree of protection: IP42 Max. bake-out temperature: 120°C Vibration level: less than 0.01μm Start-up time: less than 8min Motor according to nameplate: 40Vrms, 1033Hz, 12Arms Weight pump according to nameplate: 58kg Accessories: MAGPOWER adixen control unit (P/N 120917) in 19\" half-bay, pump cable w ...

Cryogenic Pump Type COOLVAC 1500, Cat. No. 844224V0004 Power Supply Advanced Part No. 400000250/003, Serial No. 003 009036 Electrical data Power supply according to nameplate: 208V AC, 278VA, 1.5A Cold-head motor RGD 7/25, Cat.-No. 400000801, Ser.-No. 2090 0604251, according to nameplate: 220-240V, 50/60Hz, 2/3 phases, current (FLA) 0.3/0.2A, refrigerant helium, filling pressure 17bar (246.5psi), Date 02.2003 High Vacuum Flange (Inlet): DN200 CF Backing Flange (Output): DN25 ISO-KF Flange Measuring Tube: DN16 ISO-KF Flange Electrical Connection: DN16 ISO-KF Pirani Measuring Tube THERMOVAC TTR 90 (Cat. No. 12813), 14... 32V DC, 1W, Mounted Heating 1st level: 160W, 42V AC Heater 2nd level: 90W, 42V AC Temperature sensor 1st stage: PT100 Temperature sensor 2nd stage: Si diode Pumping speed H2O: 4600l/s ±10% Pumping speed Ar/N2: 1200/1500l/s ±10% Pumping speed H2: 2500l/s ±10% Capacity ...

Type: Hybrid turbomolecular pump with 5-axis magnetic bearing Rated Speed: 31000min-1 (517Hz) Standby Speed: 15000-31000min-1 Pumping speed N2: 1550l/s (DN200) or 2150l/s (DN250) Pumping speed He: 1650/1800l/s Pumping speed H2: 1100l/s Pumping speed Ar: 1450/2000l/s N2 compression ratio: greater than 1x10E8 Ultimate pressure: less than 6x10E-9hPa Max. backing vacuum pressure N2: 2.9/2.8hPa Outlet Flange: DN40 ISO-KF N2 flush flange: DN16 ISO-KF Water cooling: greater than 60l/h, 15-40°C, max. 7bar Integral leakage rate: less than 5x10E-8hPa·l/s Sound pressure level: less than 47dB(A) Degree of protection: IP42 Max. bake-out temperature: 120°C Vibration level: less than 0.01μm Start-up time: less than 8min Motor according to nameplate: 40Vrms, 1033Hz, 12Arms Weight pump according to nameplate: 58kg Accessories: MAGPOWER adixen control unit (P/N 120917) in 19\" half-bay, pump cable w ...

Various folding boxes cardboard as shown in the pictures Auction-ID: A1-52179-170

Pictured white cordless vacuum cleaner with tube, floor nozzle, smaller nozzles, wall bracket and power supply. Additional nameplate photo assigned to this group by the seller. Battery, function and completeness not checked. Sold as one lot according to the assigned photos. Function, completeness and content of closed packaging are not verified. Traces of use and packaging damage may be present. No new condition is assured. Auction-ID: A1-52179-138

Type: Hybrid turbomolecular pump with 5-axis magnetic bearing Rated Speed: 31000min-1 (517Hz) Standby Speed: 15000-31000min-1 Pumping speed N2: 1550l/s (DN200) or 2150l/s (DN250) Pumping speed He: 1650/1800l/s Pumping speed H2: 1100l/s Pumping speed Ar: 1450/2000l/s N2 compression ratio: greater than 1x10E8 Ultimate pressure: less than 6x10E-9hPa Max. backing vacuum pressure N2: 2.9/2.8hPa Outlet Flange: DN40 ISO-KF N2 flush flange: DN16 ISO-KF Water cooling: greater than 60l/h, 15-40°C, max. 7bar Integral leakage rate: less than 5x10E-8hPa·l/s Sound pressure level: less than 47dB(A) Degree of protection: IP42 Max. bake-out temperature: 120°C Vibration level: less than 0.01μm Start-up time: less than 8min Motor according to nameplate: 40Vrms, 1033Hz, 12Arms Weight pump according to nameplate: 58kg Accessories: MAGPOWER adixen control unit (P/N 120917) in 19\" half-bay, pump cable w ...

60 litres, 1500 watts, unused Auction-ID: A1-40422-314

Cheese vat for pasta-filata/stretched-curd cheese production; PDF states ŠULENBURG and manufacturer Alfa Laval, Sweden. Auction-ID: A7-52122-43

This lot has not been checked for functionality. The seller does not assume any warranty for the condition and functionality of the lot ; Parts may be damaged or missing. Auction-ID: A1-51150-149

Pumping speed: 150m³/h (50Hz) / 180m³/h (60Hz) Ultimate pressure in continuous operation: 100mbar (abs), max. 50mbar (abs) Motor power: 3.0kW (50Hz) / 3.6kW (60Hz) Speed: 2850-2890min-1 (50Hz) Rated Voltage: 230/400V AC (3~) ±10% Vacuum connection: G11/2 Motor protection class: IP55 Insulation class: F Operating Mode: S1 Sound pressure level: 79dB(A) (50Hz) Oil filling capacity: 0.6l (manufacturer's specification: GEAR-LUBE 150) Integrated air cooling via fan Standard equipment: sound insulation hood, fine screen, vacuum check valve, vacuum regulating valve Weight: max. 124kg Accessories: Suction filter (filter housing with two swing caps and filter cartridge) attached to the vacuum connection via pipe piece and flange connection. Additional pipe insert with screen mesh attached to the exhaust air area. Auction-ID: A7-52036-52

Peak pumping speed: 100m³/h Ultimate pressure: 6.6x10-3mbar Power consumption at ultimate pressure: 1.6kW Power consumption no-load: 0.5-1.0kW Suction Flange: DN50 ISO-KF Exhaust flange: DN25 ISO-KF Water-cooled, cooling water connection 1/4 NPT quick coupling Cooling water requirement: min. 100l/h Max. cooling water pressure: 7bar (101psi) Noise level: 55dB(A) Interfaces: SPI, RS232/485 Dry Running Multistage Roots Pump Weight: 100kg Electrical data according to device plate: 208V triangle, 3-phase/3-wire, full load current 12A, 50/60Hz Version Ed. V3.5 Auction-ID: A7-52036-50

Type: Hybrid turbomolecular pump with 5-axis magnetic bearing Rated Speed: 31000min-1 (517Hz) Standby Speed: 15000-31000min-1 Pumping speed N2: 1550l/s (DN200) or 2150l/s (DN250) Pumping speed He: 1650/1800l/s Pumping speed H2: 1100l/s Pumping speed Ar: 1450/2000l/s N2 compression ratio: greater than 1x10E8 Ultimate pressure: less than 6x10E-9hPa Max. backing vacuum pressure N2: 2.9/2.8hPa Outlet Flange: DN40 ISO-KF N2 flush flange: DN16 ISO-KF Water cooling: greater than 60l/h, 15-40°C, max. 7bar Integral leakage rate: less than 5x10E-8hPa·l/s Sound pressure level: less than 47dB(A) Degree of protection: IP42 Max. bake-out temperature: 120°C Vibration level: less than 0.01μm Start-up time: less than 8min Motor according to nameplate: 40Vrms, 1033Hz, 12Arms Weight pump according to nameplate: 58kg Accessories: MAGPOWER adixen control unit (P/N 120917) in 19\" half-bay, pump cable w ...

Jacketed vat for cheese production; capacity: 300 L. For packing cottage/fresh cheese into 500 g bags; manufacturer stated only as China; capacity: 500 kg/h. Auction-ID: A7-52122-41

Type: Hybrid turbomolecular pump with 5-axis magnetic bearing Rated Speed: 39000min-1 Standby Speed: 15000-39000min-1 Pumping speed N2: 1400l/s (DN200) or 1500l/s (DN250) Pumping speed He: 1150l/s Pumping speed H2: 750l/s Compression ratio N2: 6x10E7 Ultimate pressure: 6x10E-9mbar Max. continuous suction pressure N2: 0.2mbar Max. continuous outlet pressure: 1.5mbar Max. Throughput N2: 2500sccm Outlet Flange: DN40 ISO-KF N2 flush flange: DN16 ISO-KF Purge Gas Quantity: 50sccm Water cooling: less than 60l/h, 15-25°C Max. ambient temperature: 40°C Max. bake-out temperature: 120°C Vibration level: less than 0.01μm Start-up time: less than 6min Starting Power: 650W, Operating Power: 300W Motor according to nameplate: 44Vrms, 1300Hz, 7Arms Weight pump according to nameplate: 32kg Accessories: MAGPOWER adixen control unit (P/N 120917) in 19\" half-bay, pump cable with circular connectors, ...

This lot has not been checked for functionality. The seller does not assume any warranty for the condition and functionality of the lot ; Parts may be damaged or missing. Auction-ID: A1-51150-135

Type: Hybrid turbomolecular pump with 5-axis magnetic bearing Rated Speed: 31000min-1 (517Hz) Standby Speed: 15000-31000min-1 Pumping speed N2: 1550l/s (DN200) or 2150l/s (DN250) Pumping speed He: 1650/1800l/s Pumping speed H2: 1100l/s Pumping speed Ar: 1450/2000l/s N2 compression ratio: greater than 1x10E8 Ultimate pressure: less than 6x10E-9hPa Max. backing vacuum pressure N2: 2.9/2.8hPa Outlet Flange: DN40 ISO-KF N2 flush flange: DN16 ISO-KF Water cooling: greater than 60l/h, 15-40°C, max. 7bar Integral leakage rate: less than 5x10E-8hPa·l/s Sound pressure level: less than 47dB(A) Degree of protection: IP42 Max. bake-out temperature: 120°C Vibration level: less than 0.01μm Start-up time: less than 8min Motor according to nameplate: 40Vrms, 1033Hz, 12Arms Weight pump according to nameplate: 58kg Accessories: MAGPOWER adixen control unit (P/N 120917) in 19\" half-bay, pump cable w ...

Design: oil-sealed rotary vane vacuum pump of the SPEEDIVAC series, driven by V-belts and separate electric motor on a common base plate Nameplate: Edwards HIGH VACUUM PUMP, ED50, Serial No. 14817, Made in Britain by Edwards High Vacuum (Part of BOC Ltd), Crawley England Equipment: Oil tank with oil sight glass, gas ballast valve, suction nozzle with small flange, belt guard, electric motor VEM (VEB Elektromotorenwerk Grünhain) Accessories: Electric motor VEM (VEB Elektromotorenwerk Grünhain) with terminal box and connection cable, V-belt drive with belt guard, common base plate. Auction-ID: A7-52036-79

Cryogenic Pump Type COOLVAC 1500, Cat. No. 844224V0002 Power Supply Advanced Part No. 400000250/003, Serial No. 003 008008 Electrical data Power supply according to nameplate: 208V AC, 278VA, 1.5A High Vacuum Flange (Inlet): DN200 CF Backing Flange (Output): DN25 ISO-KF Flange Measuring Tube: DN16 ISO-KF Flange Electrical Connection: DN16 ISO-KF Cold-head motor RGD 7/25, Cat. no. 400000801, Ser. no. 2090 0611286, according to nameplate: 220-240V, 50/60Hz, 2/3 phases, current (FLA) 0.3/0.2A, refrigerant helium, filling pressure 17bar (246.5psi), Date 02.2003 Pirani Measuring Tube THERMOVAC TTR 90 (Cat. No. 12813), 14... 32V DC, 1W, Mounted Heating 1st level: 160W, 42V AC Heater 2nd level: 90W, 42V AC Temperature sensor 1st stage: PT100 Temperature sensor 2nd stage: Si diode Pumping speed H2O: 4600l/s ±10% Pumping speed Ar/N2: 1200/1500l/s ±10% Pumping speed H2: 2500l/s ±10% Capacity ...

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/2czXIBFJlfE - Former Linde full-service device - Battery: 19/09/2018 80V 575AH, voltage at rest measured at 82.8V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd + 4th valve; fork adjuster 60-193 cm with sideshift - LED front work light - LED work light at the rear - Safety light at the rear - Comfort seat - Attention: drives slowly Auction-ID: A1-51819-126

Capacity: 1,500 L; part of the fermented dairy products production line. Auction-ID: A7-52122-26

Valve Series: VAT 65.0 Spherical Valve Control System (Control & Globe Valve) Nominal diameter: DN200 (8\") Flange: ISO-F on both sides, 12x M10 Housing/plate: Aluminium EN AW-6082 Seals: FKM (Viton) Pressure range: 1x10-8mbar to 1.2bar (abs) Leak rate housing/valve seat: 1x10-9mbar·l/s Max. differential pressure at the plate: 1,200mbar Max. differential pressure when opening: 5mbar Conductivity (molecular flow): 12,000l/s Min. adjustable conductivity: 10l/s Throttle time: 0.9s Type. Closing/opening time: 3s/4s Compressed air: 4-7bar Cycles to first service: 1 million (closed) / 200,000 (close/open) Max. housing temperature: 120°C Drive: Stepper motor with encoder, drive type 241244 (Lot No. 20150, Barrel No. 32) Integrated pressure regulator: with sensor supply (PLC, ±15V DC) and Power Failure Option (PFO), RS232 interface, 1 sensor input (0-10V) Power supply: 24V DC ±10%, ESC + mot ...

Wet and dry vacuum cleaner, unused in box Auction-ID: A1-40422-169

Mixed shelf content with packaged individual goods, bags and consumer goods. Sold as one lot according to the assigned photos. Function, completeness and content of closed packaging are not verified. Traces of use and packaging damage may be present. No like-new condition is assured. Incl. shelf and trolley Auction-ID: A1-52179-182

This lot has not been checked for functionality. The seller does not assume any warranty for the condition and functionality of the lot ; Parts may be damaged or missing. Auction-ID: A1-51150-137

Capacity: 1,500 L; part of the fermented dairy products production line. Auction-ID: A7-52122-25

Wet and dry vacuum cleaner, unused in box Auction-ID: A1-40422-221

Type: Ion getter pump (ion atomizer pump) with StarCell pumping elements and ferrite magnets Nominal pumping speed for nitrogen: 50l/s (StarCell element) Ultimate pressure: below 1x10E-11mbar Max. starting pressure: ≤5x10E-2mbar Operating time at 1x10E-6mbar: 80,000h Input flange: DN63 CF-F (4.5\" CFF), material AISI 304 ESR Additional connection: DN40 CF-F (2.75\" CFF), non-rotatable Max. bake-out temperature: 450°C without magnets, 350°C with magnets, HV cable 220°C No moving parts, resulting in vibration-free operation Operation only with separate high-voltage control unit (e.g. Agilent 4UHV or IPCMini) and HV cable - both not included Pump weight: 18kg Accessories: Attached stainless steel pipe assembly: T-piece with two small flange connections and metal bellows, cone reduction with small flange connection on the side, several small flange clamping rings and centering rings,  ...

Capacity: 1,000 L; part of the fermented dairy products production line. Auction-ID: A7-52122-28

Type: Hybrid turbomolecular pump with 5-axis magnetic bearing Rated Speed: 39000min-1 Standby Speed: 15000-39000min-1 Pumping speed N2: 1400l/s (DN200) or 1500l/s (DN250) Pumping speed He: 1150l/s Pumping speed H2: 750l/s Compression ratio N2: 6x10E7 Ultimate pressure: 6x10E-9mbar Max. continuous suction pressure N2: 0.2mbar Max. continuous outlet pressure: 1.5mbar Max. Throughput N2: 2500sccm Outlet Flange: DN40 ISO-KF N2 flush flange: DN16 ISO-KF Purge Gas Quantity: 50sccm Water cooling: less than 60l/h, 15-25°C Max. ambient temperature: 40°C Max. bake-out temperature: 120°C Vibration level: less than 0.01μm Start-up time: less than 6min Starting Power: 650W, Operating Power: 300W Motor according to nameplate: 44Vrms, 1300Hz, 7Arms Weight pump according to nameplate: 32kg Accessories: MAGPOWER control unit (part no. 120917) in 19-inch half-bay, 19-inch mounting frame (yellow zinc ...