va used for sale

Batch of Hand tools with hammers, pliers, spanners, clamps, hacksaws, etc. Includes: (1x) steel toolbox, (1x) wooden box. Auction-ID: A1-50859-520

Technical Data - Assembly manufacturer: ANDRITZ / Döringer Hydronics - Heat exchanger manufacturer: FUNKE - Heat exchanger type: FPDW 50-37-1-NH-1 - Maximum allowable pressure: 16 bar - Test pressure: 20.8 bar - Maximum allowable temperature: 110 °C - Volume per heat-exchanger side: 23.4 litres - FUNKE serial number: 900898 - Year of manufacture: 2019 - Oil-panel type: H1000 SSP.GR45 - Main pump motor: approximately 11 kW - Auxiliary pump motor: approximately 3 kW -Oil-panel weight according to the nameplate: 1,720 kg The unit was designed to operate together with ANDRITZ refiners and associated equipment. This Lot belongs to the ATMP 250 Industrial ANDRITZ ATMP (Advanced Thermo-Mechanical Pulp) process installation, acquired under a 2018/2019 project. The installation was designed for mechanical pulp production Auction-ID: A1-51939-525

Various racks consisting of: demountable rack (1x on mezzanine floor) and (1x) constructed rack, size: 130x50x200cm. Including: content with various tools, (2x) semi-finished transport trolleys, parts scaffolding. Auction-ID: A1-50859-282

Mercedes-Benz Sprinter 214 CDI Registration date: 15.09.2021 Mileage: 272,872 km 1,950 cc diesel engine Power: 105 kW / approx. 143 hp 6-speed manual transmission Panel vans / vans up to 3.5 t Permissible total weight: 3,500 kg Curb weight: 2,124 kg Payload mathematically: approx. 1,376 kg Euro 6 2 seats Air conditioning Radio / multimedia system Start-stop system 1 vehicle key available Registration certificate part I and II available COC papers available Vehicle fully roadworthy No known defects according to information Used condition with signs of wear due to age and mileage Auction-ID: A1-51203-1162

Two tool panels with various workshop tools and pipe clamps, pulley pullers, scupper plugs, (1x) cabinet with maintenance material, (1x) kraftwelle tool trolley with contents. Auction-ID: A1-50859-278

This Lot belongs to the ATMP 250 Industrial ANDRITZ ATMP (Advanced Thermo-Mechanical Pulp) process installation, acquired under a 2018/2019 project. The installation was designed for mechanical pulp production Auction-ID: A1-51939-700

LEROY-SOMER - NIDEC UNIDRIVE M700 High-bandwidth motor control algorithm for synchronous motors and servo motors in open-loop or closed-loop mode, up to 3,000 Hz band. Auction-ID: A1-51953-67

Vintage: 2023 Region: Rhône Valley Quantity: 12 bottles Capacity: 75 cl Packaging: boxes of 6 bottles Auction-ID: A1-51950-243

Nilfisk CTS 40 H Industrial Vacuum Cleaner Year of manufacture: 11/2013 Serial Number: 3820134800048 Voltage: 400 V / three-phase current Frequency: 50 Hz Current consumption: 9 A Motor power: 4.0 kW Degree of protection: IP55 Tank volume: 50 litres Max. vacuum: 23 kPa Weight according to nameplate: 114 kg Overall dimensions (L x W x H): 1,150 x 600 x 1,200 mm Tested for function – No warranty Used On-site test possible on viewing days Delivery is made with the scope shown in the pictures. All dimensions, performance and weight specifications are approximate and non-binding. Auction-ID: A1-51934-6

Vintage: 2024 Region: Rhône Valley Quantity: 8 bottles Capacity: 75 cl Packaging: boxes of 6 bottles Auction-ID: A1-51950-297

The HC R1 Impregnation Conveyor is a component of the ANDRITZ Kabel ATMP 250 wood-chip processing line. Its function is to convey and impregnate wood chips before they enter the next stage of the process. This Lot belongs to the ATMP 250 Industrial ANDRITZ ATMP (Advanced Thermo-Mechanical Pulp) process installation, acquired under a 2018/2019 project. The installation was designed for mechanical pulp production Auction-ID: A1-51939-533

Stainless steel This Lot belongs to the ATMP 250 Industrial ANDRITZ ATMP (Advanced Thermo-Mechanical Pulp) process installation, acquired under a 2018/2019 project. The installation was designed for mechanical pulp production Auction-ID: A1-51939-704

Consisting of: (1x) L-shaped desk, 2400x2000mm, without printer and monitor! (3x) office chairs, (1x) conference table oval, 1800x1200, (4x) conference chairs, (1x) conference table straight, 1800x800mm, (4x) conference chairs, (2x) roller door cabinet, 1200x430x1980mm, Including: content. Auction-ID: A1-50859-608

This lot belongs to ANDRITZ's industrial ATMP-250 (Advanced Thermo-Mechanical Pulp) plant, which was acquired as part of a project from 2018/2019. The plant was designed for the production of mechanical pulp. Auction-ID: A1-51939-583

Lots of various measuring equipment and test gauges, including limit gauges, measuring mandrels, pharyngeal gauges and other measuring and testing tools. Different sizes and designs, some in storage boxes. Used condition, unchecked. Scope and condition according to illustrations. Auction-ID: A1-51933-47

Lot 2405 – Combination lot of 11 lots Specifications: Type: Combination lot Lot number: 2405 Total number of included lots: 11 Features: Lot 2402 Lot 2420 Lot 2421 Lot 2422 Lot 2423 Lot 2424 Lot 2425 Lot 2426 Lot 2427 Lot 2428 Lot 2429 Particularities: Lot 2405 is a combination of several separate lots The combination consists of lot 2402 and lots 2420 to 2429 A bid on lot 2405 relates to the full combination of all 11 mentioned lots The individual objects and specifications can be found at the relevant underlying plots Lot 2405 concerns all the above-mentioned lots together as one combination Auction-ID: A1-47397-2405

FFED SAS FlexFuel Company - Hy-Calamine 1000S EGR pilot To perform an EGR valve cleaning Auction-ID: A1-51953-159

SCHLEUNIGER - OmniStrip 9400 + UniStrip 2015 - (mechanical problem + low screen display) Automatic Machine for Cutting and Stripping Metal Wires Auction-ID: A1-51953-98

The packaging line 'various weights' consisting of: -1 mobile elevator conveyor -1 loading unit (push-through) -1 electric chain hoist on tripod -Brand: KoneCranes -Lifting capacity 500 kg -1 strand press with 3 different size blocks -1 pedestrian blade with conveyor belt -1 flowpack machine Brand: Record -type: Panda MO Top Seal -year of construction: 2013 -1 coding print head -1 checkweigher -Brand: Anritsu -type: KWS 5412 BP 12 -year of construction: 2015 -1 metal detector Anritsu -1 labeling unit Brand: Altech -type: Abelt LR 10 -year of construction: 2012 -with: 1 lower and upper printer Sato -1 metal detector Anritsu -Control system with cabinet Auction-ID: A1-50943-12

Batch of digital precision measuring tools, consisting of: (4x) calipers and (2x) Hogetex digital micrometers. In various plastic storage cases, including accessories. Auction-ID: A1-50859-518

Nilfisk 3707/10 M Z22 Industrial Vacuum Cleaner Year of manufacture: 12/2013 Serial Number: 382013510008 Voltage: 400 V Current consumption: 15.10 A Frequency: 50 Hz Motor power: 7.5 kW Degree of protection: IP55 Marking: Z22 / Ex Weight: approx. 300 kg Overall dimensions (L × W × H): approx. 1,700 × 800 × 1,800 mm Including suction hose Tested for function – No warranty Used On-site test possible on viewing days Delivery is made with the scope shown in the pictures. All dimensions, performance and weight specifications are approximate and non-binding. Auction-ID: A1-51934-23

Vintage: 2023 Region: Rhône Valley Quantity: 6 bottles Capacity: 75 cl Packaging: boxes of 6 bottles Auction-ID: A1-51950-44

Equipped with lifting device and PC880 steering. Auction-ID: A1-50943-331

50/60HZ; unused in box; equipped with 2 swivel wheels; drain hose; 3 motors can be switched on separately; various attachments; stainless steel reservoir of 80 liters capacity; 3968; Auction-ID: A1-51936-627

Vintage: 2024 Region: Rhône Valley Quantity: 12 bottles Capacity: 75 cl Packaging: boxes of 6 bottles Auction-ID: A1-51950-349

3 valve/piping components, including 2 with pneumatic actuator, plus 1 separate pneumatic actuator, pallet included Auction-ID: A1-50943-460

Consisting of: -Mobile stainless steel transport/storage frame with castors -Various stainless steel pipes and rods -Stainless steel hopper -Blue industrial hoses with couplings -Plastic trays and other loose parts -Pallets included Auction-ID: A1-50943-403

Assortment of solid carbide milling cutters (solid carbide milling cutters) Extensive range of different solid carbide milling cutters in different diameters, lengths and designs, some coated and in original packaging. Various well-known manufacturers and tool types. Condition unchecked. Scope and condition according to illustrations. Auction-ID: A1-51933-11

Stainless steel oven with shelves It is forbidden to put any flammable product inside this oven. Equipped: - 1 watertight door - 1 glass door - 1 tray. Dimensions 300 x 300 mm - Possibility to put 2 trays - Thermostatically controlled electric heating from 0 to 200° - IP20 rated - Mechanical controller with 0 to 200° needle thermometer temperature display To put on the table Interior dimensions: Width 300 mm - Depth 300 mm - Height 270 mm Total electrical power: 1300 watts Currently without vacuum pump Auction-ID: A1-51318-290

power: 1200 W; Wet/dry piston: yes; socket: yes; connection: 230 V; description: unused; 3508; Auction-ID: A1-51936-517

Consisting of: (1x) microwave, (1x) sandwich maker, (1x) Airfryer, cutlery, cups, etc. Please note! Kitchen and accessories are not part of this lot. Auction-ID: A1-50859-243

Seal Water Panel Type: KP.CR5_32-5.5KW The system includes a Grundfos CR5-32 vertical multistage pump with 5.5 kW Siemens electric motor, SFL Technologies 253-litre Emergency Seal Water pressure vessel, filtration units, control and isolation valves, flow meters, pressure gauges, temperature and pressure instrumentation, IFM sensors, stainless-steel pipework and associated components, all assembled on a common steel skid. The SFL pressure vessel is rated for a maximum allowable pressure of 25 bar(g), with a test pressure of 35.7 bar(g). The vessel is designed for water and air service. This Lot belongs to the ATMP 250 Industrial ANDRITZ ATMP (Advanced Thermo-Mechanical Pulp) process installation, acquired under a 2018/2019 project. The installation was designed for mechanical pulp production Auction-ID: A1-51939-695

Lots of various optical filters and glass filters in different diameters and designs. Partly in storage boxes and original packaging. Used condition, unchecked. Scope and condition according to illustrations. Auction-ID: A1-51933-43

ISCAR – Assortment of axial grooving lathes / face grooving tools Assortment of various axial grooving lathe bits and face grooving tool holders from the manufacturer ISCAR. For the production of ring-shaped grooves and grooves on end faces as well as for other grooving and turning work on lathes. Various sizes and designs. Used condition, unchecked. Scope and condition according to illustrations. Auction-ID: A1-51933-24

PFEIFFER VACUUM – DUO 6 M – Rotary Vane Vacuum Pump Two-stage, oil-lubricated rotary vane vacuum pump from the manufacturer PFEIFFER VACUUM, type DUO 6 M, with magnetic coupling for vacuum generation in the coarse and fine vacuum range. Unused, not previously in use. In original packaging. Function unchecked. Scope and condition according to illustrations. Auction-ID: A1-51933-31

Lots of various hand tools and workshop accessories. Various sizes and designs. Used condition, unchecked. Scope and condition according to illustrations. Auction-ID: A1-51933-50

This lot belongs to ANDRITZ's industrial ATMP-250 (Advanced Thermo-Mechanical Pulp) plant, which was acquired as part of a project from 2018/2019. The plant was designed for the production of mechanical pulp. Auction-ID: A1-51939-588

SEBO 370 Electronic Brush Vacuum Cleaner / Industrial Vacuum Cleaner Type: HS3 Serial Number: V055086 Voltage: 230 V Frequency: 50 Hz Power consumption: 1,000 W Tested for function – No warranty Used On-site test possible on viewing days Delivery is made with the scope shown in the pictures. All dimensions, performance and weight specifications are approximate and non-binding. Auction-ID: A1-51934-36

Manufacturer: FESTO Model: SR 203 E-AS Machine Type: Vacuum Cleaner Machine Name: FESTO SR 203 E-AS Vacuum Cleaner Auction-ID: A1-51946-81

description: equipped with 4 wheels; unused in box; 3510; Auction-ID: A1-51936-518

Vacuum filler Vemag -Model: VDD 807 Dough divider -Power: 20 kW -Equipped with: Dough cutting attachment and conveyor belt -Cut-off mechanism: Rotary, AC servo-driven -Capacity: Up to 320 portions/min -Portion weight: 100–1,400 g -Year of manufacture: 2013 -Operating hours: 19 432 -Dimensions: 2450 × 1600 × 1950 mm -Vacuum pump dimensions: 720 × 600 × 800 mm -Additional spare parts included -Condition: Used in very good condition, after technical inspection, ready to work The dough divider with integrated cutting device and conveyor belt has been developed for dividing dough with a high wheat content: The VEMAG systems deliver high outputs – up to 9,600 portions per hour for 600 g dough portions used for sandwich bread for example. As the dough divider works without oil, it is extremely economical.

Mobile micro cutter Inotec -Type: I175CD-90RW -Power: 115 kW -Year of manufacture: 2017 -Knives and sieves included -Cutting set diameter: 175 mm -Power supply: 400 V 3Ph 50 Hz -Dimensions: 1750 x 1150 x 1580 mm -With control cabinet -Cabinet dimensions: 2070 x 750 x 2000 mm -Condition: used in very good condition

Handtmann vacuum filling machine with lifter for 200 liter meat bins, type: VF628, serial number: 16380, year of construction: 2003, 420 V, 3 Ph. 50 Hz, 18.6 A, 13.5 kW, with Busch vacuum pump, type: K8 0040 D, serial number: 02037659, capacity: 40 m³ per hour, total dimensions: 1900 mm x 1420 mm x 2100 mm.

Handtmann vacuum filling machine with lifter for 200 liter meat bins, type: VF628, number: 32445, code: 134, year of construction: 2013, 400 V, 3 Ph, 50 Hz, 26.0 A, 18.0 kW, Busch vacuum pump, type: KB 0040 D 100, serial number: DEM120270311, capacity: 40 m³/per hour, dimensions: 1750 mm x 1400 mm x 2050 mm.

Kramer+Grebe GmbH & Co. KG double paddle vacuum mixer, type: MM1000, machine number: 377/0104, year of construction: 1998, 400 V, 50 Hz, 30/35 A, volume: 1000 liter, dimensions: 2050 mm x 2500 mm x 2000 mm. Including lifter for 200 liter meat bins, elevating height: 2050 mm, total dimensions lifter: 1000 mm x 900 mm x 3000 mm.

Tipper Tie Alpina GmbH vacuum cutter with lifter for 200 liter meat bins and ejector, model: TTCop55V, serial number: 870.506, year of construction: 2013, 400 V, 50 Hz, 380/450/500 A, weight: 7600 kg, s/s bowl, volume: 550 liter, Becker vacuum pump, type: U 4.250SA/K-54, serial number: H 2708228, year of construction: 2013, capacity: 244/276 m³/h, dimensions: 3800 mm x 2400 mm x 2400 mm. Including pallet with spare parts.

Type: Hybrid turbomolecular pump with 5-axis magnetic bearing Rated Speed: 39000min-1 Standby Speed: 15000-39000min-1 Pumping speed N2: 1400l/s (DN200) or 1500l/s (DN250) Pumping speed He: 1150l/s Pumping speed H2: 750l/s Compression ratio N2: 6x10E7 Ultimate pressure: 6x10E-9mbar Max. continuous suction pressure N2: 0.2mbar Max. continuous outlet pressure: 1.5mbar Max. Throughput N2: 2500sccm Outlet Flange: DN40 ISO-KF N2 flush flange: DN16 ISO-KF Purge Gas Quantity: 50sccm Water cooling: less than 60l/h, 15-25°C Max. ambient temperature: 40°C Max. bake-out temperature: 120°C Vibration level: less than 0.01μm Start-up time: less than 6min Starting Power: 650W, Operating Power: 300W Motor according to nameplate: 44Vrms, 1300Hz, 7Arms Weight pump according to nameplate: 32kg Accessories: MAGPOWER control unit (part no. 120917) in 19-inch half-bay, 19-inch mounting frame (yellow zinc ...

This lot has not been checked for functionality. The seller does not assume any warranty for the condition and functionality of the lot ; Parts may be damaged or missing. Auction-ID: A1-51150-172

Returned goods / returns. The items are offered as available. A detailed check for function and completeness has not been carried out. Condition and scope of delivery may therefore vary depending on the article. Auction-ID: A1-52179-23

Tool cabinet without contents Auction-ID: A1-52097-8