va used for sale

Vakuu lifting device for attachment to an overhead crane = - Manufacturer: Aerolift - For lifting and turning up to 90 degrees - Max. load capacity: 16 t - Equipped with 8 suction plates, each approx. 60 x 120 cm in size - With 3 vacuum pumps

Prints labels and applies them straight away, This labeller prints the label as the pack arrives and then blows it onto the pack with air (blow applicator). That lets you put current data such as date, weight or lot number directly on the product. Printer and applicator hang from a column above a short conveyor and can be adjusted in height., According to the documentation supplied with the machine, it is an LPX 400 blow labeling system from Van Oers United. We did not find a rating plate with the year of manufacture., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/van-oers-lpx-400-print-and-apply-labell er/, Type: Print and apply labeller, Print method: Thermal transfer (ribbon), Application: Blow applicator (air), Construction: On column with conveyor, height adjustable

R23801/12 JAGENBERG Roller cutter Model: Vari Major Built: 1974 Width: 3,800 mm Materials: - coated paper, glossy and matte, grammage from 50 to 250 g/m2. max. speed: 1,500 m/min. for paper 250 g/m2 (The speed depends on the quality and grammage of the paper.) max. unwinding diameter: 2,500 mm max. winding diameter: 1,525 mm min. cutting width: 100 mm Number of upper knives: 6 Winder: 5 Single Winder max. roll width: 1,730 mm min. roll width: 450 mm max. unwinding diameter: 1,525 mm min. unwinding diameter: 300 mm 600 mm max. roll weight: 35 kN Available: immediately

Nitrogen generators membrane or PSA systems for laboratory up to production (500 L/h to several m3/h) No more gas cylinders in laboratory, plant or car repair shop (tyre gas)! Wear-free operation >99.5% pure nitrogen from mostly existing in-house compressed air Constant and safe gas generation guarantees reliable analytical results Operation-free 24-hour operation also in hazardous areas Safe operation due to low operating pressures Economically thanks to fast payback even on a technical scale! N2 production according to the membrane process The nitrogen generators continuously supply nitrogen up to a maximum purity of 99.5%. After the compressed air flows through highly effective filters, the compressed air is decomposed in a hollow fiber membrane module into a concentrated nitrogen flow and an oxygen-enriched portion. The membrane process has the great a ...

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", we offer you: 1 piece used vacuum oven, Make: BMI Type: B 64 R THY Dimensions: 600 x 900 H x 600 mm Max. temperature: 750C Power: 60 kW max. batch weight: 600 kg Working vacuum: 5x10-2 to 5x10-3 mbar Cooling pressure: 1.2 bar abs. the parts remain bare Price and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data ...

SISU/Valmet engine type=612DSE,135KW,6-cylinder series with turbocharger. Motor is complete with starter+alternator,factory repaired. 1 year warranty info@miw-zeven.de

R23801/12 JAGENBERG slitter rewinder model: Vari Dur age: 1974 Net width : 3.800 mm materials: - coated paper, gloss and matt, grammages from 50 to 250 g/m². max. speed: 1500 m/min. for paper of 250 g/m² (The speed depends on the quality and the grammage of the paper) max. unwinding diameter: 2.500 mm max. winding diameter: 1.525 mm min.cutting width: 100 mm N° of upper blades: 6 Unwinder: 5 singles unwinders max. width of reels: 1.730 mm min. width of reels: 450 mm max. unwinding diameter: 1.525 mm min. unwinding diameter: 300 mm (from 900 to 1700 mm of net width) 600 mm (from 450 to 900 mm of net width) max. weight of reels: 35 kN Available: sofort

We have more than 1000 used Alfa Laval SRC valves in different sizes in stock. Also actuators with heavy duty springs, two-step actuators, components like RC or BC housings (reverse closing, brewery CIP) and many more special items. We also sell valve parts, please ask. The valves can be customized with new seals of your choice and delivered ready to install. Valve tops like Thinktop , basic top ,Sattop , LKT-S , LKT-N and proximity switches also available, both new and used. Editec AB

Valmet-Sisu engine type= 612/634 DS/DSE-135KW fully repaired engine with starter, alternator in exchange. info@miw-zeven.de

We offer general-overhaulted exchange engines with 12-month guarantee Engines incl.starter+altenator, with test bench run ex works immediately available. We are to authorised AGCO Sisu power Service-Parter in the north Germany MIW GmbH Nord-West-Ring 8 D-27404 Zeven-Germany Tel: 0049 (0) 4281-950583 Fax: 0049 (0) 4281 950585 e mail: info@miw-zeven.de abc.miw-zeven.de

Mixproof valve DN65, with welded valvehousing and balanced bottom channel. 7 pieces available. Yom. 2006, excellent condition.

Etikettierer (semiautomaton) to application of etiquettes on all angular bundles and especially for the Nachlabeln of tubes suitably 230 V of connection / air pressure inevitably an easy service / quick arrangement this Etikettierer is suitable especially for smaller production loose dimensions. further information on inquiry

Engine power: 1,1 kW, 230V / 1PH motor coolant pump: 50 W Feeding: manual Blade speed: 20-65 m / min Number of steps: infinitely variable Band saw blade dimensions: 1,735 x 12.7 x 0.9 mm length Vice open/closed: 1,120 / 930 mm width without / with material stop: 510 / 720 mm Height lower / upper final position saw bracket: 1240 / 1,590 mm Net weight: 100 kg G & pieces 3300150SE Option: 3 Piece bi-metal band saw blades HSS

Surface grinding machine

110 Valves, Division of 100 mm, with SV. Bu. 1995

Technical data capacitor volume flow Max: 300 m³/h Capacitor size max in the delivery State: CA. 430 mm x 1610 mm high cylindrical part: approx. Ø 273 mm weight of the Chamber in the delivery State: approx. 80 kg Contents upper part (capacitor): approx. 30 L Content bottom (template container) approx. 28 L Materials elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 ° to 80 ° C condenser vacuum max: 0 to 1000 mbar (absolute) (Suitable capacitor for overpressure!) Tauscher max temperature: 1 ° to 80 ° Equipment heat exchangers: Water Tauscher max water pressure: 10 bar Tauscher material: CU tinned Material capacitor: stainless steel Technical questions or other sizes on request.; ready for operation

working width 7.400 mm Still in operation: Yes Available: sofort

Overhauled: 2018 Year of construction: 1994-2000 Blade 560 mm Engine power 6.5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100-4200 m / min Saw height control: electronic Square maximum work area: 170 x 170 mm Flat maximum work area: 300 x 150 mm Work area round max.: 200 mm Saw speed 0-40 mm / s adjustable Section length 5-950 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight approx. 1900 kg Dimensions Lxwxh 2200mm x2700mm x1950mm The machine is both technically and optically after completed retrofit in mint condition. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The programmed HMI control system ensures easy and very profitable operation of the plant. The soundproof cabin this reduces the noise emissions to a minimum. The machine will be overhauled on request in our House. Amo ...

4-color R21046/16 EDELMANN continuous stationery press model: Varioprint age: 1994 web width: 52 cm 4 printing units reel – to - reel slide-in: 4 x 16 2/3 4 x 12 3 x 16 unwinder/ rewinder: 120 cm revolving slide-in in all 4 printing units SCHOBER double tool BST colour monitor Available: nach Absprache

VakuuCar +. Modern mobile work station with vacuum clamping device and height adjustment. Set your workstation to your workpiece. Size 1200 x 800 mm Height 850-1,050 mm Flat suction pad round, India. 190 mm elongated 280 x 80 mm Weight 115 kg VakuuCar +. Modern mobile work station with vacuum clamping device and height adjustment. Set your workstation to your workpiece. Size 1200 x 800 mm Height 850-1,050 mm Flat suction pad round, India. 190 mm elongated 280 x 80 mm Weight 115 kg G & BAR-BV-1 Optional equipment: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78 Optional equipment: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78

4 pieces same batteries 24 V

Hydraulic unit incl. wiring diagram Manufacturer: Aros Hydraulik GmbH Type: HE160-Z21/V5, 5-VAD22/V5, 5-B3/120-LV6P-so. Engines: Manufacturer: Asea motor Type: MBT 132s Power: 5.5 kW Frequency: 3 ~ / 50 Hz Manufacturer: Dietz-motoren GmbH & co. KG Type: 4001540 441883 Power: 5.5 kW Voltage: 380 V Current strength: 11,8 A Valve block: Manufacturer: Lenze Type: 14 128 10 1 0 S 0 Pump: Manufacturer: Sauer / Daikin Type: J V15SA4CRX85 Maximum pressure: 250 bar Filter: Manufacturer: Argo filter Type: HD 046 056 Capacity: 35 l / min Pressure: 210 bar max. New price: approx. 7900

used vertical tool presetting device in very good condition, ready to use Recording: SK 50 max. tool length: 460mm max. tool diameter: 400mm Optics: 20x optical magnification Energy supply: Current: 220Volt 50 HZ luminous flux connection Pneumatics: 6 bar air pressure connection Machine space requirement: (w x t x h) approx. 1400 x 800 x 1700mm (without operator and service environment) Accessories / Optional equipment: â?¢ Machine cabinet with compartment â?¢ Calibration mandrel / reference mandrel â?¢ Adapter holder Iso 50 to Iso 40 for SK 40 tools Bdujvng8ha â?¢ Adapter holder Iso 50 to VDI 30 â?¢ Adapter holder Iso 50 to VDI 20 â?¢ Adapter holder Iso 50 on special tool holder â?¢ Additional measuring clock holder â?¢ Tool positioning device to 4 x 90° â?¢ Operatin ...

Qty. 1 Second-hand paper mill Mfc.: Valmet , METSO, Voith, Honeywell, Siemens, Ahlström Sulzer, Clark & Vicario, Andritz, Alfa Laval, GL & V Hedemora, Beloit, Tampella, Built: 1971 Rebuild: 1990 & 2004 Product: Uncoated magazine paper Production capacity: 290 000 tonnes Basic weight range: 44 – 57 g/m2 Width: 8.35 m Speed: 1500 m/min Raw materials: groundwood pulp, thermomechanical pulp, chemical pulp and fillers Headbox Mfc.: Valmet Type: OptiFlo 2 with dilution profiling (2004) Wire section Mfc.: Valmet Type: OptiFormer LB (loadable blades) (2004) Press section Mfc.: Valmet Type: SymPress B with 4th press (1990/2004) – shoe press in 3rd nip (2004) Drying section Mfc.: Valmet Type: SymDry (1990) – 4 single tier drying groups 2 double tier drying groups – ropeless tail threading (1990/2004) Max designed structural speed of parts rebu ...

Cylinder head, Vasa 32 Low Nox Including valves, springs and rotocaps Part no: 120055

Belts - oil separators Oil separator with KUNSTSTOFFGURT OPV - 1 / OPV - 2 This group of oil separators is recommended for industrial applications. The collection in the standard version is made of plastic without connecting traces, which is adapted to the requirements, e.g. polymer, elastomer, etc. All parameters such as performance, bandwidth, and so on are selected individually. An oil lifting height of up to 15 m is particularly useful in deep tanks, e.g. sewage treatment plants. The number after the marking (300/500/700/1000 mm) is the working length of the strip - depth from the mounting base. Complete oil separator with PU polyurethane tape. Belt color: green (standard), blue or white. Maximum liquid temperature up to 60°C. We have oil separators with a stainless steel belt INOX with a working temperature of up to 100 ° C at an additional cost. Maximum liquid temperature ...

The oil separator is used to collect oil floating on the surface. It is used wherever there is little working space and fluids must be moved and de-oiled in different places. It is a lightweight, compact portable device that is mounted on the wall of the in which the liquid to be cleaned is located. Thanks to this, it is possible to develop various technological active ingredients in de-oiled in different places. The device is designed for continuous operation. The disc is made of self-adhesive plastic, on which oil and carbohydrates, but water does not. Maximum liquid temperature up to 60 ° C - standard band. Maximum motor and housing temperature up to 40°C. Avoid mounting places with aggressive pH - additional motor protection required. With the OTV-300, you should take a 15-minute break every 3 hours. If the motor does not overheat, it can work longer. Continuous opera ...

Cutting capacity round 90°: 170 mm cutting capacity flat 90°: 140 x 210 mm cutting capacity around 45°: 125 mm section flat 45°: 100 x 125 mm working height: 890 mm band saw blade dimensions: 2080 x 20 x 0,9 mm cutting speed: 20-90 m / min coolant pump S1 100%: 100 W power: 0.75 of kW machine dimensions (L x D x H): 1250 x 540 x 1600 mm weight approx.: 157 kg

Stainless steel pipe screw with 250 mm diameter and 2,100 mm conveyor length (measured from mid inlet to middle outlet), inlet and outlet 270 mm each, with drive via intermediate gearbox and claw coupling.

Inner gear pump, internal toothed displacement pump chemical pump used Inner gear pumps are used to convey liquids of any viscosity. Also with abrasive dusts but without solid stake. e.B. oils, soaps, bitumen, tar, chocolate, molasses, cocoa butter, fat, glucose VARISCO/ ROTOTEC Type: V 85-2 SPG Flow rate at 190 rpm max approx. 15 m3/h Connections Inside approx. 100 Flange outside approx. 230 mm Gearmotor Lenze GST09-2M VBR 112C41 7.5 kW 190 rpm 400 V IP55 Dimensions: approx. 1400 x 400 x 470 mm All items are checked for function before delivery, if technically possible! Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Fuel pump, Vasa 32 Part no. 165180, PEO-G030E LOrange Part no: 165180

Ziehm Vision RFD 3D is the world's only 3D C-arm with flat-panel technology that provides a 16 cm edge length per scan volume combines 2D and 3D functionality to offer maximum intraoperative control. THE ULTIMATE C-ARM TO OUTPERFORM The treatment of cardiovascular and degenerative musculoskeletal conditions calls for high-performance intraoperative imaging technologies. Incorporating the latest CMOS technology for excellent image quality, the Ziehm Vision RFD is the ideal product. In addition to the cardiovascular-focused 20.5 cm x 20.5 cm flat-panel version, the Ziehm Vision RFD is available with a 31 cm x 31 cm CMOS flat-panel detector. This is the preferred model for highly demanding orthopedic, trauma or cardiovascular interventions that require more information in one image. Both systems are equipped with a powerful generator for optimum penetration, Advanced Active Cooling to e ...

KHS Seitz high vacuum filler for vicous products Type: Seitz wich with 12 filling valves solo machine complete recondizioned

We supply service and spare parts for seam and machining centers of the manufacturers Elumatec, Rapid, URBAN, Josting, MAW Nottmeyer and Actual. In particular, electronic components of the following machine types are constantly available. Machining centers / saegen: SLK 118, SBZ 122, SBZ 130, SBZ 131, SBZ 140, SBZ 150, DG 142, DG 204, DG 244, DGL 200, DGL 220, DGL 250, DGL 260, DGL 300 Welding machines URBAN, ACTUAL: AKS 6100, AKS 6105, AKS 6110, AKS 6600, AKS 6605, AKS 6610, AKS 6900, AKS 6910, AKS 6250 Plastering machines URBAN: SV 410, SV 410-B, SV 420, SV 430, SV 430-C, SV 530, SV 530-B, SV 530-C, SV 800, SV 815, SV 820, SV 840 Fluegel fitting machines FBA 2500, FBA 2502, FBA 2504 A machine-specific parameterization of the respective components is possible (software, firmware). We keep the following components constantly available: ferrocontrol IPC E500, E550, ...

Many thanks for your interest in our chocolate conche plant, please find below our offer Nagema conching plant - available from south-east europe, consisting off: 2x Nagema conches 3000kg, electrical power 60 kw 1x Nagema Conches 1000 kg, electrical power 25 kw 1x Nagema Conches 1000 kg, electrical power 25 kw, missing Gearbox 1 x Conche 400kg, electrical power 12,5 kw & 1x Tank 5000kg, electrical power 7 kw Machines are installed and under electrical energie We offer this machine in 'as is' condition, ex location Bulgaria Also possible to sell single machines from this Plant. Also in as-is condition, ex location Bulgaria. 1x Nagema Conches 1000 kg, electrical power 25 kw 1x Nagema Conches 1000 kg, electrical power 25 kw, missing Gearbox 1x Nagema conches 3000kg, electrical power 60 kw: 1x Conche 400kg, electrical power 12,5 kw together with Tank 5000kg, elect ...

Qty. 1 Second-hand paper mill for production of SC-A paper (Super Calendered) Mfc.: Valmet Built: 1971 Rebuild 1990 and 2004 Product: uncoated magazine paper Production capacity 290 000 tonnes Basic weight range: 44 – 57 g/m2 Width: 8.35 m Speed: 1500 m/min 3 Super calanders 3 Winders Raw materials: groundwood pulp, thermomechanical pulp, chemical pulp and fillers Paper machine basic information Headbox Valmet OptiFlo 2 with dilution profiling (2004) Wire section Valmet OptiFormer LB (loadable blades) (2004) Press section Valmet SymPress B with 4th press (1990/2004) Shoe press in 3rd nip (2004) Drying section Valmet SymDry (1990) 4 single tier drying groups, 2 double tier drying groups Ropeless tail threading (1990/2004) CD weight control with dilution valves 2004, Metso DNA. Moisture profiling at press section with Measurex-Devron steambox 1992 (57 contro ...

Tip height: 102 mm Top width: 450 mm Spindle bore: 32 mm Reduction gear Links.-right rotation 2-stage drive Vario speed: 270-3000 rpm Knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock Quill: MK 2 Dimension (Lxwxh): approx. 140 x 56 x 123 cm Weight: approx. 550 kg Accessories available Manual available The machine is located in a clean good condition!

2006 completely rebuilt Clamping surface: 1,800 x 1,800 mm Table height: 800 mm Maximum table load: 20 tons. Table displacement: 850 mm Electrics: 400 V / 50 Hz

properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 1,200 mm Total width incl. motor: : 660 mm Total width without motor: : 500 mm Belt width: 400 mm Strap type: lentsrillen/ black Frame height: 170 mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front of ...