va used for sale

AST 220 / POMINI-FARREL flat head / POMINI-FARREL 18"x15" Slabber / BANDERA Slabber. Refer to code 1043-1044-1045-1046 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

cold feed vacuum extruder Troester 90 mm x 18 D, with feed roller, drive 46 kW, pie speed 10 to 60 rpm, 5 TCU,

x-travel: 6000 mm y-travel: 3500 mm z-travel: 1500 mm total power requirement: kW weight of the machine ca.: 161 t dimensions of the machine ca.: m x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm CNC control 840 D Table load 12 t Table dimensions - lengthways 5000 mm Table dimensions - crossways 2500 mm ATC tool changing device 200-pos. Tool weight max. 30 kg Tool holder HSK A 100 Tool diameter 250 mm Tool length - max. 500 mm Spindle speed: 5 - 6000 rpm C-axis -10 to 370 deg B-axis 5 to -95 deg Column distance 3000 mm Machine weight approx. 161 t Space requirement approx. 20.5 x 11 x 6.3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

STOCKBLENDER: 1000 / 1500 / 2540 - COMERIO ERCOLE / OMG / LTC / MECCANICHE MODERNE / LAMPERTI Refer to code 1034-1035-1036-1037-1038-1039-1040-1041 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,3 x 0,65 x 0,6 m longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...

Varimixer Bear R150S Planetary Mixer - Manufacturer: A/S Vodschow & Co - Bear Varimixer R150 S - for max. 150 litres - with 2 boilers - with 1 flat beater - with 2 whisks - With 1 stainless steel table for the stirring tools - Voltage: 400 Volt - Motor kW: 4.41 kW

Mobile dust extractor Brand: SCHUKO Type: Vacomat 160 XPe New machine Technical data: Connection Ø: 160 mm Filter cleaning: motorised Volume flow: 1.593 m³/h Nominal volume flow: 1447 m³/h Motor power: 2,2 kW Negative pressure: 2.200 pa Filter surface area: 9,5 m² Test sign H3 / BGHM HO 123027 Dust level M, AWN 16 Noise absorbation: 69 dB(A)

300 litre stainless steel reactor, manufactured by GLASS, model VAS 300. Year 2014. With agitation, jacket and electrical panels. Motor characteristics: 43.19 kw at 50 Hz 400 V

Manufacturer: Schiele, Type: Vaccumat Master, Year: 2002, Control: Siemens S 7, Spraying heads - total: 2, Lackheizung: yes, Unterdrucküberwachungt: yes, Lackrückführungt: yes, Year :2002

Manufacturer: Ernst, Type: Vakuumventilator, Year: 1993, Diameter intake mm: ca 120 mm, Engine power kW: 2,5, Flow rate approx. m3/h: 1500, V-belt drive motor: yes, Outlet side mm: ca.100, Year :1993

approx. 1,500 pieces Pick-by-Light compartment display / modules, – used - : Price per piece from location: only 15.-€ (net)! Ev. If you are interested, the aluminum plug-in rails are also for sale! Manufacturer: KBS Type: PTF-L-6-VAR00 Year of manufacture: unknown Condition: good Available: immediately Location: Lunzenau camp

Frame press Hess Type VARIANT Machine No. 2182 Built in 1979 Pneumatic Frame Press Workspace 3700 mm x Height 2300 mm 4 bars with pressure cylinders from above Stop side left 1 movable pressure bar from the right with 2 pressure cylinders Cylinder stroke 110 mm Compressive force per cylinder 1100 kp (1kp = 1kg) Compressed air connection max. 15 bar Weight approx. 550 kg Exterior Dimensions 4400 mm x 700 mm x H 2800 mm Loading dimensions 4400 mm x 600 mm x H 2300 mm + Pallet with pressure beam 2800 mm x 800 mm x H approx. 700 mm

Type: FRIGoPACK FPL150G var Serial number: 12842 Year of construction: 2013 Refrigerant: NH3, R717 Compressor: GEA Grasso PR-P55S-28 Flow rate: 966 m3/h Working pressure: max 21 Bar Power: 3 x 380V, 60Hz, 162kW Dimensions: 5000 x 2200 x 2450 mm Weight: 5400 kg

Manufacturer: Viet, Type: Valleria Challenge 333TM, Year: 2000, Sanding width mm: 1350, Sanding hight mm: 3-160, Continous adjustable feeding speed m/min: 6-20, Vacuum table: yes, Year :2000

Manufacturer: Viet, Type: Valeria Challenge 223 TM, Year: 2000, Monting of the machine: Längs/Längs, Sanding width mm: 1350, Sanding hight mm: 3-160, Continous adjustable feeding speed m/min: 6-20, Vacuum table: yes, Weight in kg: 3450, Year :2000

Manufacturer: Valtorta, Type: VF/PF3, Year: ca 1992, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 3 - 100, Working height: 900, UV-laquer roller: yes, Widht of roller coater: 1360, Year :ca 1992

Manufacturer: Dietz Vakuumturbine, Type: HRD 2/5 T, Year: 1994, Engine power kW: 9,0/5,2 Ampere, rotations rpm: Flügeglrad/5550<CRLF>Motor 2880 /Umin, Direkt drive: no, Keilriemenantrieb Motor: yes, Saugseite mm: 90, Ausblasseite mm: 90, Wight approx. kg: 100, Exgeschützt: yes, Year :1994

Manufacturer: Viet Lackschleifmaschine, Type: Valeria, Year: 1996, Control: Viett, Monting of the machine: Walze, Sanding width mm: 1300, Sanding hight mm: 6-120, Number of sanding belts: 1, Sanding belt dimensions: 3250 X 1350, Rollers: 1, Shore roller 1: 30, Band 1 Schleifbandgeschwindigkeit m/s : ca.5-18, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: ca.3, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, Werkstück-Abstrahleinrichtung: yes, Year :1996

Manufacturer: Dietz Vakuumventilator, Type: HRD, Year: 1994, Engine power kW: 10,6 Ampere, rotations rpm: 2930, Direkt drive: no, Keilriemenantrieb Motor: yes, Keilriemenscheibe Flügelrad: yes, Saugseite mm: 90, Ausblasseite mm: 125, Wight approx. kg: 120, Year :1994

Manufacturer: Sata Membranenpumpe, Type: Vario top spray, FREITEXT1: Übersetzungsverhältnis 1:1, FREITEXT2: Fördervolumen Doppelhub 170 cm ², FREITEXT3: Max. Doppelhubfrequenz 140 l/min, FREITEXT4: Max. Fördermenge 23 l/min, FREITEXT5: Luftverbrauch Doppelhub 1,4 Liter,

Manufacturer: Piller, Type: RG 11 Vakuumturbine, Year: ca.1990, Diameter intake mm: Kw 4,75, Engine power kW: Drehzahl 7000, Flow rate approx. m3/h: war verbaut in schleifmaschine, rotations rpm: 0,42 m³/s , Direkt drive: Druckgussgehäuse, V-belt drive motor: Saugseite 100 mm, V-belt pulley impeller: Austritt 100 mm Durchmesser, Year :ca.1990

Filling valves

Manufacturer: Vakuumsaugtisch zum schleifen<CRLF>Plattenmaterial, Year: ca2000, FREETEXT1: Tischlänge mm 1700, FREETEXT2: Tischbreite mm 400<CRLF>, FREETEXT3: Saugerreihen 1, FREETEXT4: Drehbar stern, FREETEXT5: Aushebung, FREETEXT6: Höhe verstellbar1030 mm, FREETEXT7: Busch Vakuumpumpe, Year :ca2000

Gathering machine Horizon VAС-100 С Art.Nr. L858

Separator - S+S Rapid Vario FS70 Year of Make: 2011 Description: Separator for non-ferrous, ferrous and non-ferrous metals, with detector All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

x-travel: 7000 mm y-travel: 3500 mm z-travel: 1000 mm serial number: 14908 control: Siemens Sinumerik 880 : 2 Stück work table: 3000x2500 mm spindle power: 42 kW turning speeds: max. 4000 U/min Tool changer: 128-fach tool taper: SK50 filter unit: coolant: Accessories and cabinets can be purchased optionally The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this  ...

Height-adjustable powered roller conveyor, suitable for pallets and other large packages. The conveyor belt can be adjusted in height and is driven by two motors to distribute the load evenly. See the last image for all dimensions of the conveyor. - complete solidworks and STEP- files available - The powered roller conveyor is divided into two sections, and the division of these sections can be adjusted as needed. - The machine has been used in combination with a bag in box filler. The roller conveyor has been lightly used but is in good and working condition. Please contact for more infromation.

Guiding machine / measuring machine Year of construction 2025 7.5 kW Filter area 32m^2 Intake manifold: 300 Dimension: LxWxH: 3,650x1,540x2,570

max. format 75 x 105 cm Year of construction 2006 Automatic punching machine Computer control with touch screen max. 7,500 sheets/h (idle) Corrugated cardboard up to approx. 4 mm 2 side marks for drag or slide function 2 locking frames 2 Set of Clamping Frames for Stripping Tools Non-stop set-up and display Reading totalizer: approx. 28 million printing Operating hours 21,400 Delivery date: immediately Price on request. We supply and install worldwide.

Year of manufacture: 1992 / G: 2025 Spindle diameter ... 100mm Axis X ... 1500mm Axis Y ... 1250mm Spindle speed ... 7-1120 rpm Axis W Axis Z ... 1800mm ISO 50 Turntable diameter ... 1200x1200mm The machine is in good condition, possible to test under power.

Used cheese packaging line made by CRYOVAC. New: 2004. The line includes: 1)BL60 bagging machine (CRYOVAC, 2004) TECHNICAL DATA: - Weight: 600 kg - Consumption: Compressed air (pressure 6 bar, 30-40 m3/h) - Electricity: 380V, 50Hz, 3F + ground - Installed power: 1kW - Operating conditions: Bag dimensions: Width: min. 130mm - max. 450mm Length: min. 300mm - max. 650mm - Maximum dimensions of product: Height: min. 40mm - max. 220mm Width: min. 50mm - max. 260mm Length: min. 150mm - max. 425mm Weight: 8 kg Cycles per minute: 20 Number of employees: 1 (employee to change bags, products and general inspection) 2) Vacuum packaging machine VR8610 FUROCAVA (CRYOVAC, 2004) TECHNICAL CHARACTERISTICS: - 4 rotary chambers for continuous flow of products at different speeds - Flow of products of different forms and dimensions, is carried out quickly and without use of s ...

Vacuum packer VAMA Specifications: Type: VB 300 Year of Make: 2016 230 Volt / 50 Hz / 10 A / 1.0 kW Weight: 40 kg Chamber size: 320 x 350 x 160 mm Sealing bar length: 310 mm Max. bag size: 300 x 350 mm Machine design Completely stainless steel Compact, solid design Surface ground Corrugated acrylic glass lid incl. 3 inserts for different height levels in the chamber High-performance pump with 8 m³ capacity Easy to use Vacuum adjustable Welding time adjustable Stock machine, immediately available! Function checked, condition see original pictures.

Size: 1020 mm Equipments: used shee cutter with PC control Unico Type: Micromatic PC and cutting edge control were replace in 2012 Embossing unit year 2005 Calender width 1020 mm Machine speed max 220m / min with register control cutting accuracy: +/- 0,3 mm paper weight : max. 65-120 gram

spindle diameter: 130 mm x-travel: 4000 mm y-travel: 3000 mm z-travel: 2000 mm w-axis: 800 mm table:: 1800 x 2500 table load: 20 t feed range: 4 - 5000 mm/min spindle turning speed range: 10 - 3000 U/min spindle taper ISO: 50 spindle motor: 37 kW rapid traverse: 10 m/min Control: Heidenhain iTNC 530 total power requirement: 70 kW weight: 39 t range L-W-H: 8,5 x 8,6 x 5,5 mm equipped with - CNC control Heidenhein iTNC 530 & handwheel - 60-fold tool changer (ISO 50) - NC rotary table 1800 x 2500mm, 20t - IKZ and external coolant supply 20bar - chip conveyor - spindle support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BBA MP 50 Vacuum pump this MP series pump with air treatment capacities of 50 m3/h. He is, designed with a clear focus on reliability, efficiency and durability., Pump specifications:, Type.MP50 Diaphragm pump, max. air capacity.100 m3, /h (59 CFM), max. vacuum..8.5 m (29 inHg), Diaphragm/valves...Rubber, , Throughput capacity: 100 m3/h, , = More information =, , Year of manufacture: 2023, Cargo space capacity: 1.667 l, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just  ...

Breitenbach Press Press with the twin-shaft mixer

bore capacity in steel (diameter): 32 mm throat: 245 mm bore stroke: 135 mm spindle taper MT: 3 table-size: 410 x 380 mm spindle turning speed range: 10 - 2100 U/min voltage: 400 V total power requirement: 1,1 kW weight of the machine ca.: 210 kg dimensions of the machine ca.: 0,7 x 1,8 x 1,75 m threading device: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm center height over bed: 125 mm centre distance: 550 mm bed width: 135 mm spindle bore: 26 mm turning speed range - stepless: 50 - 2.000 U/min power requirement: 750 W 3-jaw-chuck diameter: 125 mm taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 70 mm voltage: 230 V weight of the machine ca.: 120 kg dimensions of the machine ca.: 1,25 x 0,60 x 0,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bosch 0 / 811 404 039 / 0 831 006003 Solonoid valve

Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available.

: 1980 tool taper: MK : 205 - 1450 m/min. boring range:: 3 - 40 mm Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK connected load frequency: 230 V bore capacity in steel: 16 mm throat: 169 mm quill stroke: 50 mm turning speed range - drilling: 50 - 2250 U/min spindle drive: 0,5 kW total power requirement: 0,75 kW weight of the machine ca.: 0,175 t dimensions of the machine ca.: 1,3 x 0,65 x 1,3 m 3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 250 mm connected load frequency: 230 V : 90 - 180 U/min weight of the machine ca.: 18 Kg dimensions: 470 x 300 x 440 m Knife sharpening device with variable speed Grinding wheel 250 x 50 x 12mm, grit 220 Leather disc 200 x 30 x 12mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 16 mm throat: 150 mm bore stroke: 90 mm turning speeds: 340 - 2200 U/min : 243 x 243 mm total power requirement: 0,5 kW / Volt weight of the machine ca.: 42 Kg dimensions: 400 x 450 x 900 mm Table drill - Digital speed display - Spindle protection - vice - drill replacement - Quick span feed (1 to 16 mm) - Tilt and rotating rider work table. - deep stop - tool set - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: 320 mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,6 x 0,75 x 1,7 m SINO digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 250mm bezel fixed Quick-change steel holder with 4 pcs. steel holder machine light Chip tray, chip protection wall Hardened and ground bed tracks lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,6 x 0,65 m Benchtop lathe 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. Base cabinet is optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

was in action behind a 2019 FOSS Inline Fat Analysis System Meat Master(TM) II,, for raw meat,, designed to be mobile,, effective width: 400 mm,, feeding distance: 820 mm,, gradient: approx. 60° - length: approx. 3,800 mm,, Delivery height: approx. 2,500 mm,, Delivery distance: approx. 930 mm,, Lug width: 400mm, Stud height: 50mm, Cleat pitch: approx. 200mm, Hygienic version with central scaffold tube. The construction is very open. The belt is removed using round material. Drive and deflection stations are designed with sheet metal parts. In the lower run the, Belt worn by rollers. The conveyor is equipped with a quick clamping system. Thus, the belt can be lifted for cleaning or removed from the side. The belt is positively driven and, also forced, Support:, with rectangular tube support frame with castors, Product Tours:, Plastic profiles swiveling on both sides, Clear width = stud w ...

Fully automatic filling and closing machine for filling pharmaceutical liquids into vials. Suitable for aseptic filling and for vaccines. The main machine doses with peristaltic pump system safely, precisely and caps the vials with a freeze dryer stopper. The 8-head capping machine also works very quickly, precisely and is suitable for aluminum twist-off caps. The vials are guided individually, which enables safe and fast filling and capping. The included collecting table for the final product, the main machine and the capping machine can be flexibly combined to a complete line. All machines are equipped with dust cover and laminar flow hood. - Specifications of filling and capping system: number of filling stations: 4 | number of capping heads for freeze dryer stopper: 1 | number of capping heads for aluminum twist-off caps: 8 | filling volume: max. 30ml per vial | speed of the machine  ...

Fully automatic filling and closing machine for filling pharmaceutical liquids into vials. Suitable for aseptic filling and for vaccines. The main machine doses with peristaltic pump system safely, precisely and caps the vials with a freeze dryer stopper. The 1-head capping machine also works quickly, precisely and is suitable for aluminum twist-off caps. The included collecting table for the final product, the main machine and the capping machine can be flexibly combined to a complete line. All machines are equipped with dust cover and laminar flow hood. - Specifications of filling and capping system: number of filling stations: 4 | number of capping heads for freeze dryer stopper: 1 | number of capping heads for aluminum twist-off caps: 1 | filling volume: max. 30ml per vial | speed of the machine in neutral: max. 120 bottles/min (at 4 filling stations and 5ml per vial) | accuracy: =  ...