v mixer used for sale

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: unbek. mm y-travel: unbek. mm z-travel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting stock set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head, tap wrench -for square up to: 34 mm -Price: per piece -Quantity: 2 pieces -Dimensions: 1005/85/H35 mm -Weight: 4.7kg

number of controlled axis: 6 workpiece weight: 180 kg throat: 2700 mm total power requirement: kW weight of the machine ca.: 1,43 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of controlled axis: unkt. workpiece weight: unbkt kg throat: unbkt. mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 400 mm max. pitch circle: 133,4 mm short taper holder: Gr. 6/ DIN55027 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load trestle, swivel trestle, lifting trestle, shackle, load jack -different sizes: see pictures -4x: 15 tons -4x: 15 tons -8x: 5 tons -4x: 10 tons -various sizes: on shackle -Total number: 30 pieces -Price: complete -Weight: 168 kg

resistance, wire potentiometer, resistor -Types see pictures -Price: complete -Number of packages: 2 -Weight: 1 kg

resistor, wire potentiometer, resistor -Types see pictures -Price/Sale: complete -Number: 21 packages available -Total weight: 94.5 kg

Relay, contactor, semiconductor contactor, contactor -Type: GBR 10.2-11.12 -12 V 8 A 250 V. -Price: per package -Price: complete -Number in one package: 99 pieces -Weight: 1.8 kg

Three-phase motor, electric motor -Power: 1.8 kW -Speed: 685 rpm -Shaft: Ø 24 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 360/230/H250 mm -Weight: 36 kg

Electric motor, three-phase motor -Power: 1.5 kW -Speed: 1430 rpm -Shaft: Ø 22 x 50 mm -Construction: B5 -Dimensions: 315/200/H240 mm -Weight: 16.2 kg

Punching units, punching unit, punching jaw, punching tool, non-driven latching and shearing units, forming jaws -Quantity: 27x punch clips as shown in the pictures -Price for: all 27 pieces -Manufacturer: CEWE JOKA Raskin -various types -Transport dimensions: 590/640/H470 mm -Weight: 190 kg

For sale: Vega radar sensor PS61. XXBAEHKMXX Order number: 2653.3 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikx@gmail.com The price is exclusive of 21% VAT.

faceplate diameter: 3.000 mm swing diameter: 7.000 mm turning height: 3.000 mm Control: FANUC 18i-TB total power requirement: 60/75 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electric motor, lighting current motor -Voltage: 220 volts -Power: 0.37 kW -Speed: 2860 rpm -Shaft: Ø 11 mm -Design: B5 -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: 230/210/H195 mm -Weight: 7.4 kg/piece

Three-phase motor, electric motor -Power: 3.5 kW -Speed: 950 rpm -Shaft: Ø 28 mm -Design: B3 -Protection class: IP 33 -Quantity: 1 available -Dimensions: 485/350/H280 mm -Weight: 42 kg

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Quantity: 15 collets -Various sizes: Ø 3/3x4/2x3/2x6/7/3x8/9/10/11 mm -Price/Sale: complete -Weight: 1 kg

Chimney, exhaust pipe, chimney stainless steel pipe -Chimney system: O 250 mm, not insulated -Quantity: 2 pieces of 1 m each -Price: complete -Dimensions: 250/250 / H1000 mm -Weight: 7 kg

turning diameter: 1120 mm turning length: 6000 mm swing diameter over bed slide: 760 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Colombo Type: VUP 2S Year of make: 1978 Distance between centers: 6.000 mm Centre height: 560 mm Swing over bed: 1.120 mm ø Swing over support: 760 mm ø 4-Jaw chuck: 1.000 mm ø Digital read-out: Sony Including: 1 x steady rest 520 mm ø 1 x steady rest 950 mm ø 1 x open steady rest Chisel holder Chisel support automatic feed Rapid traverse chisel support Electrically movable counter center Drilling bar: length 2046 mm x 170 mm ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 220 mm turning length: 200 mm control: Siemens Sinumerik total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

various blow molds available from stock. More information on request

Three-phase motor, electric motor -Power: 11 kW -Speed: 1440 rpm -Voltage: 380/660 V -Shaft: Ø 38/80 mm -Construction: B5 -Protection class: IP44 -Price: per piece -Number: 4 pieces -Dimensions: 520/286/H330 mm -Weight: 86 kg

Used molds, in good condition. Available ex stock

Gear motor, electric motor, three-phase motor, electric gear motor -Speed adjustable: 64 - 640 rpm -Voltage: 220/380 V -Power: 0.25 kW -Construction: B3/B5 -Shaft: Ø 14/27 mm -Dimensions: 475/220/H160 mm -Weight: 18 kg

Tires, solid rubber tires, tractor tires, forklift tires -Tire size: 18 x 7 - 8 -Rim: 4.33 R-8 -from forklift: Still type EFG 1.0/5002 -Number: 2 pieces -Price: complete -Dimensions: Ø 440/152 mm/piece -Weight: 25 kg/piece

Roof window roller shutters, blinds, roller shutter slats -Quantity: 1x roof window roller shutter available -External dimensions: 1700/480/H180 mm -Weight: 19.3 kg

Filling station, bagging station for big bag, octabine with material conveying blower Big Bag filling station with conveyor blower for filling regrind or granules in Big Bag 1.5 m³ The Big Bag filling station is robust and easy to handle. The system is ideal for use where dry granules or regrind are to be filled into octabine or big bag. Compact versions have been developed for smaller containers such as small boxes and sacks. These filling stations are ideal for smaller granulators or insert mills to fill smaller quantities of regrind into small boxes or bags. With a sophisticated design and a wide range of combinable options, the filling station can be filled for various bulk materials. The frame and the entire construction is made of sturdy profiled steel materials. Material handling system | Filling station, emptying station for one or two big bag or octabin or for small ...

Baler V20X | 20t press for cardboard, foil, paper, waste Baler, packaging press V20X | 006 With a pressing force of up to 25 tons, the V20X can efficiently compact cardboard, plastic, paper, textiles and food waste. Recommended for markets, department stores, hotels and all other users who have to deal with average amounts of waste and have to work at low ceiling heights. Bale size: 800 mm H (variable) × 1100 mm W × 750 mm D Bale weight: 200–300 kg Pressing time: 35 seconds Pressing force: up to 25 tons Dimensions: 1970 mm H × 1695 mm W × 865 mm D Filling opening: 1100 mm W × 625 mm H Integrated bale ejection mechanism Weight: 980 kg Power supply: Three-phase, 380/400 volt 3 kW motor Noise: 74 decibels DIN EN 16500 IP54 protection class E-Power Standards PLC light indicator "Bale full" and "Automatic pressing process"

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 930 rpm -Voltage: 220/380 V -Shaft diameter: 22 mm -Construction: B5 -Dimensions: 385/252/H275 mm -Weight: 25 kg

Slip ring, slewing ring, rotary transmitter, slip ring rotor, slewing ring slip ring, column slip ring, slip ring transmitter -with: rotary outlet -for: electricity 9x -Dimensions: 390/220/H190 mm -Weight: 11.6 kg

Specification: Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -1x holder: Ø 27x 85 mm -1x holder: Ø 70 x 220 mm -Sale: only complete -Weight: 18 kg

heavy gearbox, angle gearbox -Translation: 20:1 -Drive shaft: 35 mm -Output shaft: 2x 22 mm -Weight: 27 kg

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, drill grinding machine -Grinding disc: max. Ø 200 x 32 mm -Speed: 3000 rpm -Engine power: 0.9 kW -Operating voltage: 380 volts -Dimensions: 1100/540/H1140 mm -Weight: 125 kg

Baler, press for cardboard cardboard, foil paper V50 | 706 SPECIFICATIONS Bale size: 1000 mm H (variable) × 1200 mm B × 800 mm D Bale weight: 350–550 kg Pressing time: 45 seconds Pressing force: up to 50 tons Dimensions: 3055 mm H × 1985 mm W × 1130 mm D Filling opening: 1200 mm W × 640 mm H Weight: 1870 kg Power supply: Three-phase, 380/400 volt 7.5 kW motor Noise: 74 decibels DIN EN 16500 IP 54 protection class PLC light indicator "Bale full" and "Automatic pressing process" CE Certification Made in EU OPTIONS Adaptable for vehicle bodies Suitable for use at sea Automatically opening guillotine door E-Power (three-phase motor with 380/440 volts and 4 kW) PET Press Filling at the back of the machine Electronic weighing system Annual maintenance contract Galvanized Description The V50 is perfect for pressing large volumes of waste and then reselling or ...

Bale size: 600 mm H (variable) × 600 mm W × 400 mm D Bale weight: 15–30 kg Pressing time: 35 seconds Pressing force: up to 8 tons Dimensions: 2500 mm H × 765 mm W × 575 mm D Integrated bale ejection mechanism Hinged door Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Weight: 415 kg Noise: 70 decibels DIN EN 16500 IP54 protection class PLC with automatic cycle CE Certification Made in EU OPTIONS Collecting tray for residual liquid Suitable for use at sea Electronic weighing system Annual maintenance contract Solar powered Galvanized or stainless steel V5HD PRESS FOR CANS & BOTTLES Fast, efficient and easy to use: The V5HD effortlessly presses aluminium cans and PET bottles to make them easier to dispose of. Recommended for restaurants, pubs, bars and special recyclers. Hinged door and 35-second pressing time Integrated bale ejection mechan ...

Heating elements used in Kisters ZVT and ZEVA shrinktunnels. Various quantities and lengths (600, 700 and 1000 mm) and types (straight, bent, with and without wires) available: 240, 290 and 347 Volts, 2150, 3100 and 3500 Watts.

Vibronics Ultrasonic Bath Brand: Vibronics Power 1.8 kw; Serial number: 6092 Total dimensions L: 2800 mm; W: 1700 mm; H: 930 mm; Tank size: WxHxD= 1350x720x990 mm Frequency 25 kHz equipped with 4x generators

Viesse pump RB316BGT with electric motor recon Ball bearings renewed from rotor The pump was overhauled with the following new parts: - Impeller - Mechanical seal - Gasket set - Valve flap

Metal band saw blade, band saw blade, metal saw band -Condition: unused -Price: per piece -Number: 3x sheets available -Toothing: 8-12 ZpZ -Dimensions: 2950 x 27 x 0.90 mm -Weight: 0.9 kg/piece

Stick electrodes 3.25 x 350 -Type: Guarantee -Price: per package -Number: 5 packages available -Weight per package: 5.3 kg

Suction conveyors with side channel compressor and time control various capacities available

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 2000 kg -Chain length: 2.5 m -Dimensions: 730/230/H170 mm -Weight: 16.2 kg

Copy part head, copy head, part head -Copy head rail for: lathe, grinder -Dimensions: 465/80/H410 mm -Weight: 10 kg

Heavy-duty casters, heavy-duty wheel, tires -Roll size: Ø 200 x 50 mm -Inner diameter: 20 mm x 64 mm -Price: per piece -Quantity: 2 wheels available -Weight: 4.5 kg/piece

Maximum force ton-force 400 Slider stroke length mm 250 Number of courses of a slider per minute 25 Maximum distance between table and slider (in lower position of slider) mm 670 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 Main electric motor power kW 40 Press overall dimensions mm - length 3410 - width 3140 - height 5930 Press weight kg 30 600

Vacon Frequency Converters Input: U1: 3-380-500V 50/60 Hz I1: 385A Output: U2: 3-0-U1 0-320 Hz

Three-phase motor with 2 speeds, electric motor -Power: 4/12 kW -Speed: 980/1470 rpm -Shaft: Ø 42 x 110 mm -Design: B3 -pole-reversible -Protection class: IP 44 -Dimensions: 630/460/H320 mm -Weight: 129 kg