v mixer used for sale

The 30-40 KW Vaillant heat pump was an exhibit and ran for only a few hours - quasi-new! It is fully functional, max. energy efficient (A+) and suitable for all heat sources between -6 and 20 °C The VWS400 brine/water heat pump is intended as a heat generator for closed heating systems. Special features: – Flow temperature up to 65 °C for modernization and high hot water comfort – High efficiency thanks to modern, durable heat pump scroll compressor – Bivalent alternative or parallel operation possible – Increased living comfort in summer thanks to integrated cooling function (passive) – SG Ready and PV Ready – suitable for heating and hot water preparation – Up to 16 heating circuits possible thanks to integrated controller (with other accessories) Equipment: – Control for electric auxiliary heating up to 8.8 kW integrated – Sound decoupling of the  ...

with vertical matrix connector Max. work-piece diameter: 140 mm Max. diameter of upset flange: 180 mm Nominal force of upset slide: 12500 kN Force on clamping slide with dies closed: 12500 kN Stroke of: -Upset slide: 460 mm -Upset slide after closing of dies: 310 mm Number of continuous slide strokes per minute: at least 32 Electric motor power: 75 kW Machine dimensions: -Length: 8035 mm -Width: 4800 mm -Height: 3575 mm Machine weight: 140 tons

Presona LP 85 VH2 cross-tying baler, built in 2018 Specifications: Manufacturer: Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Press force pre-press 28 t Press force main press 85 t Insertion shaft 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Tying 5-fold vertical, 3-fold horizontal Oil tank capacity 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (LxWxH) Weight approx. 27000 kg The press was dismantled from ongoing operations. A spare parts package is included. The technical documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subje ...

bed width: 220 mm daylight: 130 mm centre height: 240 mm dimensions of the machine ca.: 0,5 x 0,3 x 0,15 m weight: ca. 20 kg Additional lynette available upon request - Photo 2. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Good day We hereby offer you a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer Presona AB, Sweden Type LP 85 VH1 Year of construction 2014 Total operating hours, 37,565 hours, as of March 2025 Press force main press 85 t Specific pressing force 100 N/cm² Press force pre-press flap 28 t Dimensions of the insertion tray 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW 5-fold vertical bonding Hydraulic oil tank volume 1,000 L Press dimensions built up with hopper 10,350 x 2400 x 3,150 mm (L x W x H) Machine weight press approx. 25 t Hint: The machine was  ...

Impressions=0 m, Condition= Very Good , Availability= 2025-11-03, Min size: 28x28 cm max Size: 76x102 cm Max speed 50 m/min Grammar 130 gsm- 380 gsm Pneumatic

Web Width: 2450 mm

The VT1250 is a double-sided glass drilling machine from Bavelloni , designed for precision and durability in the glass processing industry. Here are the key specifications and features: ⚙️Technical Specifications VT1250 Machine type : Double-sided glass drilling machine (top and bottom) Maximum glass thickness : Up to 25 mm Maximum drill diameter : 130 mm Range (X-axis) : 1250 mm Machine dimensions : Length: approx. 2200 mm Width: approx. 1000 mm Height: approx. 1900 mm Transport dimensions: 2.5 x 2.2 x 1.9 m Year of manufacture : Varies per model (for example 1995 for reconditioned models) Extras : Equipped with laser for positioning Double-sided drill heads (top and bottom) Automatic programming of drill heads based on glass thickness Air-controlled rack for glass positioning Why popular? Reliability : Used worldwide by glass companies because of its robust ...

Inlet size: 400 x 250 mm - With electrical motor

With new Control-unit

Axial fan, FL050-VDK.4I.V5S, Ziehl ABEGG, new Please note: Original Ziehl Abegg product and not a replica from ……. Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The parts were purchased from a company's spare parts warehouse, were in their original packaging, show only very minor signs of storage, have never been used and are completely new. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pö ...

Fiorini Storage Tank 8000 Liters VKB 2.0 - 1000L 4" Buffer tank 8000 liters 2x125FL 8 bar Make: IVRP - Fiorini Type VKG – 8,000 – V – 2x125FL – 8 bar Special model Painted on the outside, black on the inside 20mm insulation 2x flange connections DN 125 3 threaded connections 1/2" PN 8 bar Tmax: +60°C Dimensions: Diameter mm 1840, height mm 3465 Weight kg approx. 252.7 (empty) Connection: 2x DN125 Product no.: G0300062000035 Year of construction 2023/24 Condition: Optical 1-2, Technically ok Stock Equipment, as good as new Price: on request in Euro (plus VAT from Nettetal) – 3 months warranty (Technical changes and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Used, complete, fully automated herb and vegetable processing line This production line is designed for processing, grinding, and packaging herbs and vegetables. This modern, automated set of equipment allows you to transform raw materials into a finished, professionally packaged product – all in one process. The biggest advantage: the entire line is operated by just one person, minimizing labor costs and ensuring smooth and efficient production. Line composition and specifications: 1. Inteco Sp. z o.o. pre-mixer – capacity up to 1000 kg. 2. Inteco screw feeders – diameter 100 and 120 mm. 3. Condux-Werk (Germany) pre-grinding mill – mesh size 6–10 mm, 7.5 kW motor. 4. Spring feeders – diameter 50 mm, Chinese design. 5. Condux-Werk (Germany) fine grinding mill – mesh size 2–4 mm, 7.5 kW motor. 6. Inteco Sp. z o.o. mixer with feeder – precise product measureme ...

Key data: 800 KW, 1000 kVA, 400 V

NEW/Surplus MWN 3016 V 16, 800 kW, 400v. 50 Hz. CHP Enclosed Natural Gas Generator Set Rating: 800kW, Electric Power: 800kWe Power factor (cos. phi): 1.0, 400 Volts, 3Ph, 50Hz, 1500 Rpm Altitude: max 1100m a.s.l., Ambient temperature: +5 up to +53 degC Engine: MWM 3016 V 16, 16 cylinders in V, water cooled, turbo charged with intercooler Alternator: 800kW / 400V synchronous, 3 phases, brushless, self-exciting, self-regulating, air cross flow ventilated, protection mode IP23, engine flywheel and generator shaft coupled, engine and generator coupled over SAE flange and fixed to one unit, genset mounted with vibration dampers. Control unit MMC consisting of: Electronic speed regulation for the engine,  Cos. phi regulation for the engine, Complete engine monitoring and control, Complete generator monitoring, Display of all relevant data (voltage, frequency, power, temperatures, oil pr ...

; Gross weight [kg]: 1020; Engine: Kubota V2203M; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Sockets 400V: 1x63A, 1x32A, 2x 16A, Sockets 230V: 3x 16A CEE, 1x 16A Schuko; Water Tank Volume [l]: 150

; Gross weight [kg]: 3535; Engine: Volvo TAD1342GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 515

; Accessories: Options:, , - DPX-28051 = Socket box: 2x 32A - 2x 16A 3P, - DPX-28052 = Socket box: 63A - 32A - 2X 16A 3P, - DPX-28053 = Socket box: 2x 32A - 2x Schucko 230V, - DPX-28054 = Socket box: 63A - 32A - 16A 5P - 2x 16A 3P, - DPX-28055 = Socket box: 125A- 63A -

Qty. 1 Second-hand cast house for billet production incl. filtration system Mfc.: Gautschi, Mechatherm, Weishaupt, PEHAKA, FISONS, Dantherm Filtration GmbH Built: Unknown The machine is very strong design and still running well because it has been maintained always with original spare parts and qualified experts. Direct casting on a vertical table and make billets of 6'' and 8''. To make 9'' the tool of the table can be modified. The vertical caster can work with 9'' by remachining and modifying the tool table. 1 Melting and Tilting furnace GAUTSCHI, Capacity 20 T, Fuel Oil Burners The furnace has an elevator charging machine to load the scrap from the top of the furnace Degassing unit FILD from MECHATHERM England Nitrogen treatment and filtering 1 Vertical caster for billets 26 x 6’’ and 20 x 8’’ for useful log length 6 m 1 Homogenizing furnace, Fuel Oil Burners Weish ...

Dimensions (L/W/H): 3150x4000x1900 mm Weight: 1500 kg Total power requirement: 36 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2600x700x1900 mm Weight: 300 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3030x450x660 mm Weight: 325 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

NEW !industrial axial fan 910mm Ø 29000m3/h Ziehl-Abegg FC091-ADS.7M.V7 NEW !industrial axial fan 910mm dia 29000m3/h Ziehl-Abegg FC091-ADS.7M.V7 /ct2310/ 3PCS IN STOCK Diameter 910mm 400V 29000m³/h 680/520 rpm manufacturer : Ziehl-Abegg FC0910-ADS.7M.V7 VT0141 Power supply: 400V RoHS compliance: Yes Diameter (propeller or turbine): 910mm Flow rate (m³/h): 29000 Air pressure: 70-140pa Frequency: 50/60Hz Protection rating: IP.54 Current consumption (amperes): 3.6/2.3 Mounted on bearings Curved aluminum blades 7pcs "replaceable" Noise level (decibel): 83 Power consumption (watts): 1250W/660W Airflow direction: Propeller towards the mounting points Air temperature range: -25°C to +60°C Connection type: Terminal box Speed ​​(rpm): 680/520 Weight: 55kg Overall dimensions: B1 = 337mm B2 = 20mm, D1 = 1005mm, D3 = 102

Multifunctional cooking unit Frima VarioCookingCenter VCC 112, built in 2009, in a very good used and functional condition. Suitable for cooking, frying and frying. Two crucibles of 14 liters each (individually adjustable), temperature range 30-250° C, ceramic field, core temperature sensor. Digital control via touchscreen. Water inlet and drain, hand shower. With cabinets. Dimensions B/T/H 125/80/112 cm. Connection values 400 volts, 17 kW. Workshop-tested, ready for immediate use. Further on request.

Industrial Axial Fan 910 ø 29000m3/h Ziehl-Abegg FN091-MDS.7M.V5P1 Extractor Fan Manufacturer: Ziehl-Abegg, Güntner VT01405 Type: FN091-MDS.7M.V5P1 Condition: NEW!, TESTED Description: Axial, protective grille, 3-phase, 2-speed dahlander fan. 910mm blade diameter. Airflow: 29000m3/h Pressure: 20- 150,- PA Motor: 3~ 400VAC (±10%) Δ/Y 50Hz, Power: 0,50/0,35 kW Power consumption: 1,25/0,71 A Power supply: 400/3/50 V/Ph/Hz Protection: IP54 Rotation speed: 550/450 rpm Fan: 7-blade, toothed blades Blade diameter: 910 mm Blade material: galvanized metal Overall dimensions: 930x270 mm (diameter x thickness) Mounting size (split circle): 940 mm Operating temperature min/max -25°C/+70°C Weight: 47kg

Unused Compact Gully Sealing Pillow System Manufacturer Vetter For gullys from 30cm to 50cm diameter In a practical transport case Permissible operating overpressure 0.2bar Good oil and chemical resistance 2 pieces available. Protection of sewerage from hazardous substances. To stop dangerous liquids making their way through roads into the sewer system. Vetter Universal Gully sealing pads are immediately ready for operation. The sealing cushion is positioned directly in the drain of the gully and filled with air by means of the enclosed pressure bottle. As a result, the cushion presses against the drain walls and thus closes the drain. Special price

Nut bumper head for attachment to a machine with SK40 tool holder. The tool is suitable for pushing grooves. Manufacturer: ETS Perez 69 VILL.NNE BREVET19015 TYPE127745 How spiral groove works Accessories various groove shock steels M.3, M.4, M.6, M8 T.45, M8 T80, M10 T.80, M10 T80, M12 T.80, M.16 T.82 Special price

High-performance kneader Volume: 2.5 ltr. Material : product-contacted areas of stainless steel;