v mixer used for sale

; Power [PS]: 359; Gross weight [kg]: 4600; Engine: Volvo TAD1380GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320

; Power [PS]: 419; Engine: Volvo TAD1381GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320

Two used ABB BBC turbochargers ABB VTR 254-11 HT:398345 HT:398344 Turbochargers still need to be tested and assembled ! Both turbochargers are disassembled on request I send them photos !

Image amplifier with 23cm, 2 x TFT monitors with 50 Hz  Usb Laser crosshairs 1,000 image memory Patien Management (Road Map) built-in dose area meter Resolution 1.2 - 1.4 Lp/m Refurbished

; Power [PS]: 479; Gross weight [kg]: 3900; Engine: Volvo TAD1382GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320

; Power [PS]: 239; Engine: Volvo TAD881GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 280

; Power [PS]: 299; Gross weight [kg]: 4450; Engine: Volvo TAD882GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 280

; Power [PS]: 789; Gross weight [kg]: 7500; Engine: Volvo TWD1683GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 600

Touchscreen High 1k x 1k resolution  Pulsed 2 kW monoblock generator up to 25 pulse/sec OBJECT Detected Dose Control (ODDC) 2 x TFT monitor on external monitor trolley Dicom Usb Laser 10,000 image memory CD-R Rome Printer Sony UP-960CE Built: 2012

Canon OCE varioPRINT 110 (135 Series) – Used B&W Digital Printer with Saddle Finisher-AK2 Functions: stapling, stacking, booklet folding, backstitching, V-folding Year of Make: 2013 Date of acquisition invoice: 08.12.2014 Toner level: 60% Page Counter: Large Black: 8,389 Black small: 69,951 Total: 78,340 Origin: Device comes from a receivables matter and has been in storage for several years. Equipment: - VP DP Operating Panel A3 - Duplex Reader D1 - OPE Attention Light-C1 - VP DP 110 Base Lic V2 - PCL6 STD Speed-C1 - PS3/PDF STD Speed-C1 - Scan to File/E-Mail-C1 - CL Scan to File/E-Mail-C1 - Covers No EPIM-C1 - Saddle Finisher AK2 Specifications: - Printing technology: Océ DirectPress - Toner: One-component toner - Print resolution: 600 × 2,400 dpi -Technology: - Toner Transfer Fusing (TTF) - HeatXchange technology - Toner and paper ref ...

The Vax Commercial VCSD-05 is a battery-powered floor mopping machine with a capacity of 75 liters. The two 400 W brushed motors are powered by two 12 V batteries with an output of 76 ah/h. The batteries have a capacity of 3 hours, the charging time is 8 hours. The VCSD-05 is a compact floor mopping machine with a cleaning width of 660 mm. Brushes are available as a matching VCSD-05 floor brush or as a floor pad in conjunction with a VCSD-05 driver board. Due to its compact dimensions, this floor mopping machine can also be easily transported to different floors by elevator. Used cleaning machines from Heratec are all tested for functionality, cleaned and, if necessary, overhauled. Specifications: Manufacturer: Vax Type: Commercial VCSD-05 Condition: used/good Motor (Suction:) 400 W Motor (brush): 2x 400 W Capacity wet: 75 liters Capacity extraction: 80 liters Chargin ...

; Gross weight [kg]: 4950; Engine: Volvo TAD1642GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 900

AMADA VIPROS 2510 KING CNC punching machine was built in 1998 in Japan by AMADA CO., LTD. The machine, distinguished by its extensive machining capabilities, is an excellent choice for the production of precise parts with the highest quality. It is capable of punching holes in sheet metal made of, among others stainless steel and aluminium, with a maximum thickness of 6.4 mm. The machining process is performed on a large brush table, which prevents scratches and scrapes on the sheet surface, and also significantly reduces noise level. All this is completed by an intelligent FANUC CNC control in which the most advanced machining programmes are created in just a few steps. The AMADA VIPROS 2510K punching machine weighs 11000 kg. Technical specifications of the AMADA VIPROS 2510 KING punching machine - CNC control: FANUC Series 18-P - maximum press force: 20 t (196 kN) - feed in the X ...

Optical sorting machine with material feed (via 2 stainless steel infeed hoppers and 2 electronically controlled vibratory chutes), material chute (made of specially coated aluminium), optical unit (4 high-resolution monochrome cameras with 2,048 pixels each; integrated image processing with a resolution of 0.09 mm) and blow-out system (144 high-speed blow-out nozzles with 1,400 cycles per second). The machine can be used, for example, to remove particles of different colours or foreign bodies from a material stream. Throughput: 500 to 800 kg/h (for quartz sand 0.1 - 6.0 mm). IP6X protection class for dustproof operation; incl. connection for external dust removal. Dimensions: 1.4 m wide x 1.8 m deep x 1.90 m high.

Gardner Denver S-VSI 100 Vacuum Pump Dry-running, non-contact screw vacuum pumps Easy maintenance. Suitable for industrial applications such as vacuum forming, metallurgy and surface treatment. High efficiency due to stepped screw profile. Specifications: Pumping speed m3/h max. 100 at 50 Hz // 138 at 60 Hz Final pressure mbar (abs.) 0.1 Rated voltage 50 Hz/ 60 Hz: 230/400V ± 10% / 220/380V Motor power 50 Hz/ 60 Hz: 3 / 3.6 kW Current consumption 50 Hz/ 60 Hz: 10.5 / 6.0 Speed min 50 Hz / 60 Hz: 2880 / 3550 Weight : 190 kg Cooling water consumption: 1.8 l/min Operating hours: Between 321 - 14613 h Approximately 80% of the pumps are equipped with less than 4,000 operating hours Since we have about 40 of these pumps, we ship them randomly. 1x Gardner Denver S-VSI 100 vacuum pump More items - new and used - can be found in our shop! International shipping c ...

Table drilling unit W 100 A Manufacturer: TOS Varnsdorf overhauled: 20125 Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 7-1120 rpm. Axis W ... 900mm Axis Z ... 1250mm ISO 50 Max table load ... 3000kg L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg Main Engine Power... 11kW Total power demand ... 17kVA Clamping table area ... 1250 x 1250mm Flat disc diameter... 600mm Max circulation diameter ... 900mm The machine is possible to test under electricity, with one-year warranty.

230 VAC, 1 PH -10° to + 90°C temperature range 10 to 98 relative humidity Chamber dimensions: 22 1/2 inch W x 18 inches T x 32 1/2 inch H

Tool holder VDI 30 longitudinal holder Interface size square 20x20 3.3020DSS left overhead Cantilever length (LPR) 100.00 mm Functional length (LF) 0.00 mm Operating height (HF) 20.00 mm Functional width (WF) 36.00 mm Clamping length, max. (LSCX) 100.00 mm Direction Tool Holder (HAND) L Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Square Interface Size 20x20 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-3-3020dss-laengsaufnahme-stahlho ehe-20-din-69-880-form-c4-links-ueberkopf-/69496 Condition: New

The Vulcan is Hitacht's fastest metal analyzer with the most advanced display and reporting system. Compared to its predecessor, the m-Pulse, it has been fundamentally redesigned and offers many new possibilities, such as GPS, camera, WiFi and pre-burning function. The operation is functionally oriented to the menu guides, as they are known from smartphones. The operation of the device via the functional touchscreen is correspondingly easy. The equipment offered here comes from our demonstration pool and is only 12 months old, so it is still sold with a used machine warranty.

MWM TCG 2020 V12/V16/V20 Heat Exchangers Charge Air Coolers Intercoolers Part Number 12452511

with Ultra Turrax T25 Vacuum pump with controler IKAVAC Heater Huber Control unit RE 1621 l P various spare parts Operating manuals Dimensions LWH: 1200 x 800 x 860 mm Weight: approx. 100 kg

Tool holder VDI 30 longitudinal holder Interface size square 25x25 2.3025G300 right overhead Cantilever length (LPR) 70.00 mm Functional length (LF) 0.00 mm Working height (HF) 25.00 mm Functional width (WF) 17.00 mm Clamping length, max. (LSCX) 70.00 mm Direction Tool Holder (HAND) R Number of holders, workpiece side (CCONWS) 1 Product Categories Static Tools and Adapters Product type square holder Shaft size VDI30 Interface size square 25x25 Convertible No Rotatable main and sub-spindle No Tool orientation 0° Price without VAT Link to the product on the manufacturer's website: ttps://ews-tools.de/de-DE/product/ews-2-3025g300-laengsaufnahme-stahlh oehe-25-/28007 Condition: New

GEA plate heat exchanger VT10 CDS-16 with 10 plates in very good condition Built: 03/2006 Min/Max permissible pressure: 0 bar / 10 bar (both sides) Min./Max. permissible temperature: -10 °C / 100 °C Test pressure: 13 bar Volume: 3.0 / 3.3 L Kerb weight: 133 kg Width: 290 mm Height: 920 mm Depth: 570 mm Refrigeration/heat medium: propylene glycol Connections: 4x Pipe nipple DN 50 Device can be inspected at any time in 76694 Forest upon request.

Bosch 0811402001, Bosch 0811403001, Bosch 0811402073, Bosch 0811402105, Bosch 0811404042, Bosch 0811404090, Bosch 0811404750, Bosch 1037001150, Bosch 1817414296, MOOG D651-129B , and more...

Tool presetting device Brand: Zoller Type: Venturion 400 Without computer,software. Mechanics only This item is only sold to traders.

Thyssenkrupp Velino xtra escalator Escalator description Manufacturer: Thyssenkrupp Model: Velino xtra FT 923 Type: 5 EK 30 Year of manufacture: 2018 General: Head: 4,129 m Step width: 1,000 m Step length: 0.203 m Handrail length: 2 x 24.967 m Rated speed: 0.5 m/s Tilt angle: 30 °C Number of steps that can be accessed at the same time: 24 Total number of levels: 58 Existing safety equipment: Start-up switch up/down, up, down Emergency stop switch, top + bottom Handrail inlet switch, right + left, up + down Chain tension monitoring switch, right + left Speed monitoring Phase control device Control Off Switch, Top + Bottom Thermal Motor Circuit Breaker Brake function monitoring Handrail speed monitoring Error Stage Monitoring Cover plate switch Drive: Single drive with duplex chain countershaft Engine make: emod Engine Type: 5CNR112L/4-20 Mo ...

2 X DEUTZ MARINE ENGINES V12 816 626 HP@1800 RPM WITH TWINDISC MG5202 2.48:1