v mixer used for sale

Electric coupling for filling machine VEMAG type HK 23/4 -Kind. Item No.: 081-011-201 - 081011201 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36

We sell here a vacuum filler from the manufacturer Vemag, type 134 in a very good used and functional condition. The sausage filler is built in 1999, runs on 400 volts, programmable, hopper divisible, incl. filling cone, for filling, portioning and unscrewing, workshop tested, ready for immediate use, dimensions W/D/H 60/80/160 cm, others on request.

Cutting height:150 mm saw band length:2400 mm cutting width:350 mm total power requirement:380 V weight of the machine ca.:350 kg dimensions of the machine ca.:800 x 950 x 1650 mm

Vacuum chamber volume: 0.62m³, weight: 2800kg, cooling water requirement: 700l/h. On-site inspection is possible.

Cone valve, pharmaceutical design Manufacturer: Visval AG Type SoliValve 100 Year of construction August 2018 Suitable for the powder transfer industry. It allows the transfer and dosing of powder under the best containment conditions. It is suitable for operation within OEB5. Fully automatic and closed of solids in bags, bottles, drums (1L to 700L). The opening is controlled by a high-precision stepper motor and a backlash-free ball screw, which enables opening steps with an accuracy of up to 0.1 mm.

Pfeiffer Vacuum Hicube 300 brand new, in stock. 12 months warranty.

Manufacturer: Olsa Model: - Year: - Quality: stainless steel Capacity: 1000 litres Stirring: 4,5 KW Motor speed : 710 - 1440 rpm Internal pressure (bar): unknown, pressure possible. Air input Pressure gauge and inside pressure holding valve Double jacket: yes Heat insulation: yes T?C control hot / cold: solenoid valves Note: cleaning of interior marks possible in case of sale

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Type: DG4V-3-6C -Price: per piece -Number: 2x available -Weight: 2.5 kg

Vacuum pump, rotary vane pump -Drive: 3 kW -Feed rate: 30 m³/h -Max. Vacuum: 50 mbar -Oil lubricated -Speed: 1430 rpm -Dimensions: 600/450/H480 mm -Weight: 110 kg

Variator Pulley, Vario Adjustment Pulley, Vario Belt Pulley, PIV Gear, Vario Gear, Variable Speed Pulley, Variable Pulley, Expansion Pulley, V-Belt Pulley Adjustable -Manufacturer: VEB, Vario belt pulley -Outer pulley diameter: 220 mm -Inner diameter: 22 mm -Dimensions: Ø220 x 260 mm -Weight: 8 kg

Variator Pulley, Vario Adjustment Pulley, Vario Belt Pulley, PIV Gear, Vario Gear, Variable Speed Pulley, Variable Pulley, Expansion Pulley, V-Belt Pulley Adjustable -Manufacturer: VEB, Vario belt pulley type E 502.22 -Outer pulley diameter: 220 mm -Inner diameter: 22 mm -Dimensions: Ø220 x 140 mm -Weight: 5.4 kg

Variator pulley, vario timing pulley, vario pulley, PIV gearbox, vario gearbox, variable speed pulley, variable pulley, expansion pulley, adjustable V-pulley -Manufacturer: VEB, Vario belt pulley type C 501.22 -Outer pulley diameter: 220 mm -Diameter inside: 26/22 mm -Dimensions: Ø220 x 135 mm -Weight: 6.1kg

Variator pulley, Vario adjusting pulley, Vario pulley, PIV gear, Vario gear, variable speed pulley, variable pulley, expansion pulley, V-belt pulley adjustable -Manufacturer: VEB, vario pulley with pressure spring -Diameter pulley outside: 220 mm -Diameter mounting inside: 22 mm -Dimensions: Ø220 x 140 mm -Weight: 5.8 kg

Gate valve with flange connection, butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve - Manufacturer: Valpres -Type: 72000007 -Size: DN32 PN40 -Price: per piece -Number: 3 piece -Dimensions: 155/250/50 mm -Weight: 4.3 kg/piece

VMI 3500L mixing vessel 2001, Stainless, 3500L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with centrifugal pump, 3Ph

VMI 2936L mixing vessel 2001, Stainless, 2936L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with Inoxpa centrifugal pump, 3Ph

Vacuum filling machine Vemag Robby Type 136 Filling, portioning, linking PC-Control AC Servo drive Including linking device Filling performance: depending on the goods up to 2700 kg/h Portioning weight: 5-60000 g - variable adjustable in steps from 0.1 g or 1 g Portioning speed: up to 650 portions per min (depeding on product, casing and portioning size) Speed of rotation: 0-100%, variable adjustable Linking: 0-10, variable adjustable

Vacuum filling machine Vemag Robby 2 Type 135 Filling, portioning, linking PC-Control Including loading device for 200 ltr. bins Including linking device Filling performance: depending on the goods up to 3000 kg/h Portioning weight: 5-60000 g - variable adjustable in steps from 0.1 g or 1 g Portioning speed: up to 650 portions per min (depeding on product, casing and portioning size) Speed of rotation: 0-100%, variable adjustable Linking: 0-10, variable adjustable

Offer a vacuum pumping station from Pfeiffer Vacuum here. It consists of the rotary vane pump DUO65 with the oil mist separator ONFR 035/065D with oil recirculation and the roots pump/booster WKP 250 A

Hydraulic Valve, Proportional Pressure Relief Valve VICKERS KCG 3 250D Z M U H1 10 ( KCG3250DZMUH110 ) KCG-3-250-D-Z-M-U-H1-10 max. 250 bar 24 V DC used, tested ! Dimensions ( without cable ): 156 x 46 x 85 mm

VMI 2400L high shear mixing vessel 2012, Stainless, 2400l jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with centrifugal pump, 3Ph

Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle VEB GR2HVX SN. MA24F165L2 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Hydraulic valve VICKERS DG4V 30B M U H7 60 ( DG4V30BMUH760 ) max. 350 bar 24 V Dimensions: 155 x 45 x 95 mm

OPTIONAL: Kitagawa Autodex 4th axis on table X-axis: 500 mm Y-axis: 300 mm Z-axis: 300 mm Table dimensions: 600 x 380 mm Admission in spindle (ISO): BT 30 Power on the spindle: 5,5 / 3,7 kW Drilling-capacity: dia 20 mm Tapping-capacity: M16 x 2.0 Control : Yasnac Number of axes: 4 Toolchanger: yes Number of toolholders: 14 positions Number of rotations: 10 > 8000 rpm Length: 1640 mm Depth: 2349 mm Height: 2600 mm Weight: 2,3 ton

Sausage production line VEMAG VEMAG vacuum stuffer Type: ROBOT HP 10C Hopper capacity: 250 l Productivity: 4000-5000 kg/h External dimensions: 2100 x 1350 x 2150 mm Filling pressure: max. 40 bar Maximum serving size: 0- 10000 Vacuum pump: 20m3/h Total power: 9.5 kW Hydraulic pump power: 7.5 kW Filling speed adjustable 0 - 100% Device for automatic unscrewing and portioning to length Type: LPG 208 Power: 6.0 KW External dimensions: 1650 x 1000 x 1350 mm For natural, collagen and artificial casings For connecting and portioning all popular types of casings of equal lengths using mechanical dividers according to the following principles: Fixed section length separation tape that can be changed via quick release For sausages with a caliber of 13 to 40 mm For sausages with a length from 20 mm to approx. 400 mm Portioning speed: over 2000 ports/min. (depending on t ...

CNC SELCA S 4040 DH Rated unloaded mass 11,000 kg Maximum load put on table 1200 kg Length 4000 mm Width 3200 mm Height 3000 mm Table length 1500 mm Table width at 650 mm Distance between spindle nose the table top 150-850 mm Coolant tank 600 × 600 mm ISO 50 spindle attachment Feed pressure 6/8 BAR Spindle motor 12.2 kW at 8000 rpm 15.2 kW from 1500 to 6000 rpm X-axis motor 5.03 kW (same power on other axes) Spindle rotation speed 8000 R pm Tool magazine capacity 24 positions High-pressure cooling system pressure 20 bar

For sale is a MAXIMART vertical milling center, type RAPIDO 48, year of manufacture 1999 computer FANUC, has only 3,000 working hours, weight 6,900 kilograms,

Microdosing valve for vacuum systems Pfeiffer Vacuum UDV046 PFI52035 CF16 rotatable, CF40 fixed Very good condition, like new The bolt set for the CF16 flange comes with it.

Technical information Tray packing line (sorter + bagger) : - Vendee sorter concept Calibra T / Year 2017 - Ulma Florida flow-pack bagging machine / Year 2003 - Videojet marking system / Year 2016 - Automatic conveyor Vendée concept / Year 2018 The current format: Tray 500 gr (tray height 65mm width 110 and length 190) Second recorded format: Tray 250 gr (tray height 50mm, width 98 and length 140). Possible packaging 1 kg (tray height 108mm, width 125 and length 192). The automatic weighing unit can weigh products up to 3 kg. Changeover is done quickly by changing the computer parameters and changing 3 mechanical settings. Maximum capacity of the line is 65 units/minute with the use of the Vendée Concept weighing unit and 80 units/minute without the weighing unit. The flow pack packer in use alone can go up to 110 packed units/minute. Frabicant / bran ...

Vacuum heat sealer with automatic feeding of preformed trays, in modified atmosphere, in alternative of only welding or only gas (OXYGEN and BIOGON) For rigid polystyrene trays, flexible plastic closure Feeding belt with three loading positions. Prepared for SKIN processing Max dimensions of the trays: single 390 x 270 x h120mm, double 270 x 180 x h120mm, triple 270 x 110 x h120mm INCLUDES simple mold for tray with dimensions 240 x 180 x h60mm (AERPACK B31-55) Adjustable welding temperature up to 200ºC Production of up to 15 cycles/min with only welding. vacuum pump included AVAILABLE INSTRUCTION BOOK, OPERATING PANEL MANUAL AND ELECTRICAL DIAGRAMS

Vacuum heat sealer with automatic feeding, for packaging of trays in modified atmosphere, in alternative of only welding or only gas (OXYGEN and BIOGON) For rigid polystyrene trays, flexible plastic closure Feeding belt with eight loading positions, preparation with two molds in a contemporary cycle and possibility of preparation with molds for a single or multiple tray. dimensions max. of trays: Simple 390 x 270 x h120mm, double 270 x 180 x h120mm, triple 270 x 108 x h120mm INCLUDES two molds for tray with dimensions 210 x 125 x h50mm (LINPAC 12-47) Adjustable welding temperature up to 200ºC Production up to 8 cycles/min AVAILABLE MANUAL

With the Bucher press, you can automatically link the 4 phases of a complete cycle: filling, pressing, emptying, washing. • 25% greater efficiency • Personnel gain • Mastery of your process. The press adds to the important drainage function, particularly useful for fresh, pumped over, crushed, destemmed (vintage) grapes... In addition, they are equipped with automatic filling: only one loading point and automatic division of the grapes in the cage . With fresh, crushed or destemmed grapes, more than 75% must can be obtained with just the filling action. They mainly consist of a slightly inclined cylindrical cage (made of laminated polyester resin and fiberglass), in which two plates move on a central screw. Depending on the direction of cage rotation, the plates move closer (compression) or move apart (decompression). Depending on the type of grape, 3 or 6 compressions will be p ...

100P2 hydraulic sandwich press, Rotary cage, Voran The device is in very good condition, ready to work without any financial contribution. Bought in 2021 from a Voran dealer in Poland as new. The set includes lids/spacers made of acacia wood and filter cloths made of polyester (two sets). The whole is kept in very good condition.

- Platform scale for the weight of raw coffee; - Pneumatic loader for raw coffee, with collection tank for 60 kg green coffee; - Vittoria semi-automatic roaster; roasting capacity per cycle: 60 kg. Cycle duration between 15/17 minutes. Electric panel, toasting cycle control with automatic unloading. Probes for temperature detection and the possibility to set and adjust the roasting curves; - Opening toaster by compressed air control as well as emergency opening always controlled automatically for operator safety; - Roasting drum internally connected to a water outlet, for fire safety, which can be operated automatically or manually; - Methane burner; - Film maker with continuous film expulsion system; - Baltur smoke burner; - Cooling tank with safety grid protection and suction circuit; - Electro-pneumatic stone remover with silos, complete with suction fan; - Stone removal sil ...

The SF 4120 gantry center is in good technical condition with a sliding table and a fixed gantry stand. Heidenhain iTNC 530 control system. The SF machine meets high demands in surface machining of molds, edge cutting, 3D machining of molds and in precise finishing of contours. Can be seen in operation by appointment The price of the machine also includes accessories, e.g.: 2-axis head - High-pressure cooling through the center of the spindle 20bar/ - Z axis – balancing system - Chain tool magazine for 40 tools (exchange in vertical position) - Two screw chip conveyors - MPG handwheel - Blow the spindle with air - Flushing gun and interface to the pneumatic circuit - Work probe HEIDENHAIN TS-640

Chipconveyor X-axis: 1050 mm Y-axis: 510 mm Z-axis: 580 mm Table dimensions: 1300 x 510 mm Admission in spindle (ISO): BT 40 Power on the spindle: 17/22,5 kW Drilling-capacity: dia 40 mm Tapping-capacity: M33 x 3.5 Control : Siemens 810D Number of axes: 3 Toolchanger: yes Number of toolholders: 24 positions Number of rotations: 10 > 10 000 rpm Length: 2900 mm Depth: 3700 mm Height: 2680 mm Weight: 7 ton

Vacuum sealer VAMA VB 370, Table-top unit, chamber size 37x40x16cm, machine serviced, 3 shelves, Vacuum pump Busch 10cbm/h, Connection 230V, total dimensions LxWxL approx. 57x45x40cm, weight approx. 50kg, Built in 2008, very good used condition

x-travel: 600 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc type: Serie 0-MD mm Tool changer: 16 Pos. spindle taper: ISO: 40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Welding Rotary Machine Right, left-hand rotation Variable speed Due to slight modification ( front wall partially out separating and attaching a adjustable roller support can also be drilled rods and e.g. cardan shafts Weld. VAT not deductible Please inquire with location and postcode.

Filling Machine Vemag DP 3, Vacuum Filling Machine, with rotary gear, new DHV (long version) incl. 4 filling tubes complete 14-20mm, Numerous other filling tubes, accessories, operating instructions, 2 sets of rotor blades, Top maintained machine, built in 2013, only 3831 operating hours, Connection 400V, 6kW, dimensions LxWxH approx. 75x88x175cm, weight approx. 445kg, very good used condition, fully functional Price without DHV with filling tubes 17.500,-€

Description: Technical details: x-travel 600 mm, y-travel 450 mm, z-travel 400 mm, tool holder MK 3, feed continuously 20-600 mm/min, speed 80-3000 rpm, boom adjustment horizontally +/- 15 degrees, Total power requirement 4 kW, additional information: milling head can be swiveled 90 degrees, coolant device, vice, stepless feed 20-600 mm/min, drilling quill (stroke: 80 mm), automatic drilling feed, upper boom angle adjustable: +/- 15 degrees, drilling column swiveling: +/ - 90 degrees, horizontal - counter bearing with drilling quill MK3, angle milling head +/- 90 degrees Approx. Onsite Dimension. (l x w x h): 1,250 x 1,000 x 1,850 mm, weight approx.: 1,000 kg

Vacuum filler Manufacturer: Vemag Model: Robby 1 PC-control with 99 program storage Filling capacity: max. 2.700 kg/h Filling pressure: max. 40 bar Dimensions: 205x130x210cm Electric power: 5.4kW Voltage: 400V 50Hz

Description: Please note! It may be possible to adapt the trailer from Lot 4 to this vehicle! (No guarantee)  , Inv. no. 70720 Ser. no. 973165 Approx. Onsite Dimension. (l x w x h): 1,900 x 700 x 1,800 mm, weight approx.: 515 kg

Description: Composed of about No. 8 sensors. Features: X-axis: 1029 mV/g Y-axis: 1023 mV/g Z-axis: 1006 mV/g Last calibration: 2018 Approx. Onsite Dimension. (l x w x h): 300 x 300 x 300 mm, weight approx.: 5 kg

Description: Point width approx. 1500 mm , Turning diameter over bed approx. 940 mm , Turning diameter above support approx. 740 mm , Rod clearance approx. 200 mm Fabrication number 1-206/59 , Power 30 kW , Voltage 3 x 500 V Nominal current 55 A Frequency 50 Hz Control SIEMENS Sinumerik The machine was modernized in 2001 by the Stork company Approx. Onsite Dimension. (l x w x h): 4,500 x 2,200 x 1,950 mm, weight approx.: 4,500 kg

Pressure vessel with valve system, dimensions pressure vessel: ø 1450 mm x 3700 mm, dimensions valve system: 2500 mm x 950 mm x 1450 mm.

S/s vibrating gutter with sieve, code: 1098738-00, 70328-01, gutter width: 650 mm, sieve gaps: 2 mm, total dimensions: 1750 mm x 1200 mm x 1480 mm.

HFE vacuum systems bv mobile double chamber vacuum machine, type: SB-620, serial number: 20111547, year of construction: 2011, 220/240 V, 1 Ph, 50 Hz, 27.5 A, chamber: (2x) 610 mm x 405 mm, seal length: (4x) 600 mm, Busch vacuum pump, type: RA 0063 F 5K5, capacity: 63 m³ per hour, total dimensions: 1350 mm x 640 mm x 1050 mm.

VC999 Verpackungssystem AG vacuum machine, type: VC999 07S H15/205, machine number: 07152588, year of construction: 2015, 400 V, 3 Ph, 50 Hz, 7 kW, vacuum pump, seal width: 920 mm and (2x) 450 mm, dimensions chamber: 920 mm x 450 mm, total dimensions: 1400 mm x 900 mm x 1100 mm.

Vemag vacuum filling machine with mobile portioning machine, model: Robot 500, number: 128 4217, year of construction: 2011, 400/460 V, 3 Ph, 50/60 Hz, 13 A, 4.9 kW, dimensions: 1050 mm x 650 mm x 1900 mm. Mobile portioning machine, s/s frame, dye: ø 96 mm, plastic belt, belt width: 195 mm, total dimensions: 1700 mm x 600 mm x 1300 mm. Including box with parts.