v mixer used for sale

A mobile extraction and filter unit Höcker is available. Filter class: H3, motor power: 4kW, suction connection: 200mm, filter surface area: approx. 12m², max. volume flow: 3400m³/h, max. negative pressure: 2700Pa, collection container volume: 350l, machine dimensions X/Y/Z: approx. 2000mm/1100mm/2000mm, weight: approx. 420kg. On site inspection is possible.

Key data: 400 mm

Saw blade diameter: 400 mm Cutting area flat 90°: 200 x 120 mm Saw area flat 45°: 140 x 120 mm Saw area flat: 30°100 x 100 mm Cutting range round 90°: 140 mm Saw range round 45°: 140 mm Sawing range round 30°: 110 mm Replenishment length electronically adjustable: max. 800 mm Coolant pump / minimum quantity spraying device Hydraulic material clamping Hydraulic material feed Weight: approx. 1300 kg

Package Tool Holder VDI 30 Make: EWS Drill rod holder D= 8, 10, 12, 16, 20, 25, 32, 40mm Collet Holder ER 16, ER 25, ER 32 Turning steel holder outside left and right There are about 250 pieces available Also to be handed in individually Other images such as VDI 40, SK 40, HSK 63 and images on request

Key data: 630 mm, 1100 mm, 600 mm

Clamping area: Ø700 x 500 mm Rapid traverse X/Y/Z: 60/60/56 m/min Milling spindle Max. spindle speed: 18,000 rpm SK-40 Other equipment Air on the workpiece Cooling by the spindle, 70 bar Renishaw RMP 600 Probe F) Tool tip control 5-axis simultaneous machining Tool radius compensation – 5-axis simultaneous Drilling cycle with torque-dependent chip breaking G00 slope constant Synch. Threading Cylinder interpolation EIA Dynamic Compensation 2 (included 1) KNOLL Coolant System KF200/1250 Paper Belt Filter 70 bar high-pressure pumoe KNOLL Chip Conveyor 640-S-1

Manufacturer: Viessmann Model: Vitocrossal 200 Type: Gas condensing boiler Nominal heat output max. at 50/30 °C: 87 kW Nominal heat output max. at 80/60 °C: 80 kW Nominal heat output min. at 50/30 °C: 29 kW Nominal heat output min. at 80/60 °C: 27 kW Fuel: Natural gas Gas Type: G20/G25 Gas connection pressure: 20 mbar Exhaust System: Condensing Standards: EN 297 / EN 303 / EN 483 / EN 677 NOx class: 6 Year of Make: 2011

Key data: 1384 , 400

Available full gas natural power plant of MWM TBG 620 V16 K (1384kW) from 2004 with 72318 hours of working. All the maintenances has been done by official service following the official schedule. The engine stopped working perfectly at full load. Full boroscope inspection is available. Scope of Supply: -Genset -Gas train -Control Panel -Braker switch -Exchanger -Silincer -Refrigeration System (HT Aerofan and LT refrigeration tower) The assets are already dismounted on our wharehouse ready to be load or to be inspected. For more information please contact us!

Manufacturer: Engel Model: e victory 50/50 Year of Manufacture: 2019 Operating Hours: 18,660 Hours Condition: Very good technical condition Technical Details Safety Standard: CE Type Injection Unit: Horizontal Injection Unit: 50 Material Injection Unit: Thermoplastics Screw Diameter: 18 mm Drive Injection Unit: Electric Construction: Holmlos Clamping Plate: 450 x 500mm Closing Force: 50to Platen Spacing: 600 mm Drive: Hydraulisch/ Hybrid Tool Weight Max: 600 Kg

Manufacturer: Engel Model: e victory 170/110 Year of Manufacture: 2019 Total Running Hours: 23,838 Hours Condition: Very good technical condition Technical Details Safety Standard: CE Type Injection Unit: Horizontal Injection Unit: 170 Material Injection Unit: Thermoplastics Screw Diameter: 25 mm Drive Injection Unit: Electric Construction: Holmlos Clamping Plate: 680 x 740mm Closing Force: 110to Platen Spacing: 800 mm Drive: Hydraulisch/ Hybrid Tool Weight Max: 1600 Kg Automation: Linear Roboter Vipe Find more here - / Contact us at -

The 2003 Mazak VTC 300 is a Vertical Traveling Column (VTC) machining center designed for handling long, heavy, or oversized workpieces that might be awkward on a traditional moving-table machine. Find more here - / Contact us at -

General SKU397X1153 MakeEaton LocationBarneveld CEcheck TypeVMDE-0402-AC10-100DX-22SEN-M Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume85 Ltr. Surface0.16 m2 Specified Features - Candle filter Candle filtercheck Filter surface± 0,4 m² (1,6 m ²) Number of candles4 Candle sizesø 200 x 659 Cake capacity185 l. Liquid outletDN100 Max. temperature— 10 / 160 °C Top connectionsDN100 Vessel sizesø 550 x 800 mm MaterialStainless steel 1.4571 (316Ti) Candle filters Capacity185 l. Max. temperature-10°C/+160°C Number of bags4 Information No.V1586.3 Year of construction2017 Mounted on legscheck Weight220 kgCandle filtersEatonFilters > Candle filtersBrand > Eaton What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wor ...

Monoblock KRONES VKS- 054-PET Year of construction -1991 Number of fillers - 54 pcs., Number of screw heads - 8 pcs. The machine is in a state of technical novelty after a major overhaul in 2026, It has one set of format parts per 1.5 liter PET bottle

General SKU397X1128 LocationBarneveld CEcheck Pressure Working pressure3 Bar Main Features MaterialStainless steel Volume2470 Ltr. Surface22 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface22 m² Drying chamber capacity2.47 m³ Drying chamber sizes1560 x 1700 x 1050 mm Max. temperature20—95 °C Number of trays15 Tray sizes1550 x 950 mm With 1 doorcheck Connection for the vacuum pumpcheck MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Information MakeVötsch TypeVHT 155/170 WW Machine number59 52600085 0010 Floorspace1,45 x 1,05 m Total height2,01 m Weight4000 kg Extra Specificationswith AUTOTHERM – Temperature controller AWF 95-36/E: Technical data: Rated temperature: 95 °C Heating capacity: 36 kW Cooling: :Indirect shell-and-tube coolingTray dryersVöts ...

For sale are 12 brass square holders from Erowa Billing: Invoice will be issued. According to §19 para. 1 of the German VAT Act, no turnover tax is charged (small business regulation) Delivery: Pick-up on site or shipping possible. Shipping costs are borne by the buyer If you have any questions, please feel free to contact us.

For sale are five driven tool holders axial VDI40 ER25 Fully functional Price indication is per holder Billing: Invoice will be issued. According to §19 para. 1 of the German VAT Act, no turnover tax is charged (small business regulation) Delivery: Pick-up on site or shipping possible. Shipping costs are borne by the buyer If you have any questions, please feel free to contact us.

This HONESS V250-3000 was manufactured in 2002. A profile punching machine for tubes and profiles, it features a self-centering product clamp and interchangeable clamping jaws for various tube types. It can handle tubes up to 100 mm wide and 80 mm high, with a maximum punching diameter of 40 mm. Ideal for high-speed punching with a carriage travel speed of 40 m/min. Contact us for more information about this machine.

The machine is in good technical condition, after prior agreement it is possible to test it. Operating hours: 12,041h Parameters: Control system: MAZATROL MATRIX NEXUS Worktable length: 1300 mm Worktable width: 530 mm Spindle drive power: 11 kW Speed: 12,000 1/min X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel: 510 mm Taper: ISO 40 Number of positions in the magazine: 30 pcs Machine weight: 7100 kg

Offer 26018 Technical data: - Max. working length 500 mm - Max. sheet thickness 1.5 mm - Various roller diameters - Drive – brake motor 400 V / 1.4 kW - Space requirement approx. W 850 x D 1700 x H 1250 mm - Weight approx. 0.8 t - Roller attachments 42 ; 45 ; 50 ; 55 ; 60 ; 65 ; 70 ; 90 ; 135 mm

It is basically a Zeiss SEM with a water-cooled column (LEO S420), tungsten cathode and has the following detectors/equipment: SE Detector RE Detector EDX detector Noran System 7 from Thermo Fisher And another for work at low pressure, even for poorly conductive samples. Vacuum-resistant live camera Chamber size Inner dimensions: D152 x W112 x H141cm³ Condition cathode Well, there are still several tungsten filaments available. Vacuum system: Pfeiffer DUO65 rotary vane pump, roots pump + large, magnetically mounted Pfeiffer turbopump

his Mazak VCN 510C is a vertical machining center manufactured in 2003, designed for precision 3-axis machining operations. It features a robust construction with a machine weight of approximately 6000 kg, ensuring stability during high-speed machining. Technical data Travel distances: X 1050 mm / Y 500 mm / Z 500 mm Spindle: 12,000 min⁻¹, SK40 Tool magazine: 30 positions Control: Fusion Table size: approx. 1300 × 550 mm Cooling: 15 bar IK Machine weight: approx. 6,000 kg Machine is in daily use, ready for immediate operation Chip conveyor IKZ Documentation available Find more here - / Contact us at -

CNC vertical machining center Type: Vesta-1000 Manufacturer: Hwacheon Year: 2016 Control: Fanuc Series 0i-MD X: 1000 mm Y: 550 mm Z: 500 mm Distance table-spindle: 130 – 630 mm Working surface: 1100 × 502 mm Table load capacity: 700 kg Spindle speed: 12000 rpm Rapid traverse (X / Y / Z) m/min 36 / 36 / 30 Working feed (X / Y / Z) mm/min 1 – 24,000 Feed motor (X / Y / Z) kW 1.8 / 1.8 / 3.0 Automatic Tool Changer Tool taper: BT40 Tool changer: 24 positions Cooling through the center of the tool 30 bar Power consumption: 30 kVA Coolant tank capacity: 380 l Chip conveyor 4th axis TSUDAKOMA Wireless workpiece probe + tool probe. Dimensions:3335 × 2200 x 2670 mm Weight: 6500 kg Machine in good condition, under power Find more here - / Contact us at -

VOEST DA 360 - Lead & Pull Spindle Lathe -Heidenhain digital display -Peak height above bed 400mm -Turning diameter over bed 800mm -Turning diameter over support 500mm -Turning length 1000mm -Rod passage approx. 87mm -Speed range 14 - 1000 rpm / 18x speeds -Automatic length / face feeds -Automatic input Z-axis -Tailstock MK 5 -Wedge bar chuck 250mm -Multifix base holder with insert -Work light -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3500 KG

General SKU271X310 MakeLiftVrac Mach.No.1401 Year of construction2014 Main Features Motor1.5 KW Length6000 mm Width350 mm Specified Features - Conveyor belt MaterialStainless steel Elevator beltcheck Trough type conveyor beltcheck Belt width350 mm Belt length6000 mm With motor1,5 kW, 380-415 volt, 1485 volt With variable speed drivecheck Belt speed57 rpm Outlet height1600 mm Information LocationBarneveld Inclined on framecheck Mounted on wheelscheck With switchcheck Floorspace6,20x1,50 m Total height2,40 m Weight700 kg CEcheckConveyor beltsLift VracConveying systems > Conveyor beltsBrand > Lift Vrac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for man ...

General SKU406S1038 LocationBarneveld MakeBallerstaedt & Co. Rastatt (D) TypePOLYMAT-VARIOSEAL PN Main Features Inlet diameter90 mm Number of1 heads Specified Features - Capper MaterialStainless steel Single headcheck Suitable forplastic and glass containers Number of closing heads:1 Without motorcheck Manual operatedcheck CapacityDepending on the skill of the operator up to 700 sealing/h. Suitable for bottle/jar dia.90 mm Suitable for bottle/jar height375 mm Information No.71.9615.011.1000 Year of construction1996 With switchcheck Floorspace0,6x0,4M Total height1 M Weight50 KgCappersBallerstaedt RastattPackaging machines > CappersBrand > Ballerstaedt Rastatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnev ...

General SKU311P702 LocationBarneveld Pressure Vacuum possiblecheck Main Features MaterialStainless steel Motor0.37 KW Inlet diameter400 mm Specified Features - Deaerators De-aeratorcheck Vacuum de-aeratorcheck Vessel capacity60 Ltr Vessel diameter400mm Cylindrical height500mm Conical height110mm With jacketcheck With centrifugal discdia. 200 mm Motor0,37 kW (Ex) MaterialStainless steel Information Makeunknown, manufacturing tag is missing Year of constructionunknown Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace0,8x0,7 M Total height2,2 M Extra Specifications4pce cip spray ball for tankcleaningDeaerators-De-aerators > DeaeratorsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine i ...

General SKU120X674 MakeVMA-Getzmann TypeDispermat 5 No.601-9814689 Year of constructionunknown, Milling chamber made of glass Mounted on framecheck Material Disc materialPlastic Main Features MaterialStainless steel/Glass Volume0.4 Ltr. Motor2.2 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmill(1x) Capacity0,4 ltr Housing dimensions dia. 120x400mm With mechanical sealcheck With jacketcheck Motor2,2 KW, 220/380 Volt With variable speed drivecheck Information LocationBarneveld Floorspace0,9x0,6 M Total height1,5 M Weight175 KGSand millsVMA-GetzmannMills > Sand millsBrand > VMA-Getzmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barnevel ...

x-travel: 1100 mm y-travel: 610 mm z-travel: 610 mm control: Heidenhain 530 total power requirement: kW weight of the machine ca.: 7800 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizon Vac 100 a+c, Year 2005 10 Station Vac 100a 10 Station Vac 100c 1 x PJ-77R Jogger 1 x Stitch & Folder SPF-20A 1 x Fore-Edge Trimmer FC-20A Etc. Available: immediately

Various used Lenze frequency converters available Tested before delivery (or preset to your engine)

Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories:, Total enclosure,, Cooling unit for dielectric,, automatic fire extinguishing system,, Mist extractor, Probe,, Machine lamp,, automatic central lubrication,, Workpiece carrier ISO50,, Measuring mandrel,, Tailstock., Cutter outside diameter: Max. 250 mm, Cutting length: max. 260 mm, Shank tool diameter: 10 - 250 mm, Outside diameter disc-shaped tools: Max. 250 mm, Tool weight max.: 20 kg, X axis travel: 275 mm, Y-axis travel: 300 mm, W-axis travel: 200 mm, A-axis mounting cone: ISWO 50, E-axis swivel range: 180 °, Required space for the machine: 2535 x 2200 x 2220 mm, Weight approx.: 4500 kg, Connected load: 4.5 kW (400 V / 50 Hz), colour: gray RAL 7045/7047

Turning length: 4000mm, turning diameter over bed: 680mm, turning diameter over short cross slide: 480mm, turning diameter over long cross slide: 420mm, turning diameter in the gap: 880mm, swing diameter in the gap: 960mm, travel cross slide: 480mm, top slide: 230mm, tailstock quill: 280mm, center height over flat bed: 335mm, center height over prism top edge: 313mm, bed width: 560mm, diameter of tailstock quill: 125mm, Morse taper of center: no. 6. With upper support, steady rests, operating manual, digital readout and measuring system, Multifix tool holder. Machine is currently partially overhauled. An on-site inspection is possible.

internal diameter: 5-200 mm grinding depth: 250 mm spindle stock travel: 180 mm spindle bore: 50 mm turning speed range - spindle: 120-1000 U/min weight of the machine ca.: 3 t dimensions of the machine ca.: 2.4 x 1.25 x 1.75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

enlargement: 10-100x diameter: 200 x 150 mm weight of the machine ca.: 0.15 t dimensions of the machine ca.: 0.4 x 0.5 x 0.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 100 mm, 1600 mm, 1120 mm

Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1200 rpm Axis W ... 900mm Axis Z ... 1250mm Spindle mount... ISO 50. Clamping table surface... 1250 x 1250mm Max. table load ... 3000kg Main engine power ... 11kW L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14 000kg The machine is in good condition, possible to test under power.

B&A REF: 9271 TON:800 SCREW DIAMETER: 110MM SHOT WEIGHT: 4720 STROKE VOLUME: 5160CM3 INJECTION PRESSURE: 1620AR PLATEN SIZES: 1550 X 1400MM DBTB: 1100 X 950MM MIN MOULD HEIGHT: 400MM MAX MOULD HEIGHT: 1100MM MOULD OPENING STROKE: 1080MM MAX DAYLIGHT: 2180MM EJECTOR STROKE: 350MM CONTROLS: TACTUS CORE PULLING: 3 AIR VALVES: 4 MOTOR: 37 + 37 HEATING CAPACITY:37 KW ROBOT : STYRAM S10-L SERVO SCREW DRIVE: ELECTRIC

Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process., Accessories:, Total enclosure,, Adaptation to A-axis on HSK63-A,E incl. test mandrel Ø 25 mm System HSK63 A,E, Integrated loading system and workpiece magazine for automated processing of up to 12 workpieces., Probe,, Automatic central lubrication,, Coolant system for dielectric fluid,, Automatic fire extinguishing system,, Mist extractor,, Machine lamp., Cutter outside diameter: Max. 320 mm, Shank tool diameter: 10-320 mm, Outside diameter disc-shaped tools: Max. 320 mm, Cutting length: max. 480 mm, Tool weight: max. 20 kg, X axis travel: 500 mm, Y-axis travel: 300 mm, W-axis travel: 200 mm, A-axis rotation range: 360 °, E-axis swivel range: 180 °, Required space for the machine: 2535 x 2200 x 2280 mm, Weight a ...

Manufacturer: VISCOM Model: S3088 III Year of Manufacture: 2011 Weight: 750kg Last annual maintenance by Viscom: June 23, 2025 With a loading/unloading machine: - Manufacturer: ASYS - Type: AES 03DK - Year of manufacture: 05/11 - Weight: 335kg Find more here - / Contact us at -

Components: headstock, main spindle, faceplate flange, taper, table, guideway, longitudinal guide, cross guide, tailstock, workpiece holder, tailstock taper, workpiece spindle. With documentation and records. An on-site inspection is possible.

Atomic Force Microscope (AFM)An Atomic Force Microscope (AFM) measures topography, feature size, defects, and properties of solid surfaces. The Dimension X AFM provides depth metrology solutions.

engine output: 3 x 1000 Watt electric 230 volt: Well-maintained industrial dry vacuum cleaner with 3 motors totaling 3 kW, refurbished hose, floor suction nozzle with tube, 3 suction nozzles. Suitable for the separation of dusts with MAK values with carcinogenic substances of groups II and III. Filters of dust classes E and N, manual cleaning with a shaker bar, dust container approx. 35 l located at the bottom with foot pedal emptying. Unit for heavy-duty commercial use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal turning machine manufactured in 2019. This Victor Vturn-NP20 was moderately used, with only 3,000 real operating hours, and is in very good technical condition. It features a standard turning diameter of 206 mm and a bar capacity of 52 mm, making it suitable for machining small and medium-sized parts. Consider the opportunity to buy this Victor Vturn-NP20 horizontal turning machine. Contact us for further details.

Key data: 1020 mm, 610 mm, 610 mm

Technical data: Manufacturer: Spinner Type: VC1020 Year of Make: 2001 Control: Siemens 810D ShopMill Travel distances: X 1,020 mm, Y 610 mm, Z 610mm Switch-on hours: 31,983 h Spindle Speed: 8,000 rpm Torque: 105/70 Nm Work table Dimensions L/W: 1,200 x 600 mm Table load: 1,000 kg Tools Tool holder: SK40 Tool changer: 32-fold Dimensions and weight Dimensions L/W/H: 2,900 mm x 2,300 mm x 2,600 mm Weight: 6,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Internal mould cooling with high-pressure system Workroom with LED work lights Chip conveyor

General SKU260S238 LocationBarneveld MakeF.H. Schule GmbH (D) TypeKUK 630/ III VDL-1 Pressure Working pressure12 Bar Main Features MaterialPolypropylene Pressure12 Bar Surface26 m2 Specified Features - Filterpress Filter presscheck Filter surface26 m2 Recessed chamber platescheck Number of platens52 Internal platen sizes510x510mm External platen sizes630x630mm Platen thickness45mm Frame thickness10mm Cake capacity260 ltr. Central inletdia. 50mm Connectionsdia. 50mm Hydraulic closingcheck With hydraulic unitcheck MaterialPolypropylene Information No.304224-2A Year of construction1986 Floorspace4,3x1,7 M Total height1,0 M Weight2000 KgFilterpressesSchuleFilters > FilterpressesBrand > Schule What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are wel ...

General SKU268N284 MakeKLEIN VAKUUMTECHNIK GMBH No.8765 Year of construction2000 Mounted on framecheck Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume235 Ltr. Max.temp.180 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature180 Number of compartments:1 Capacity235 Ltr Internal width600mm Internal depth650mm Internal height600mm Electric heatingcheck With trays2 MaterialStainless steel Information LocationBarneveld Floorspace1,2 x 0,9 M Total height2,0 M Extra Specificationswith vacuum pump, brand Leybold, type D16BDrying ovensKlein VakuumtecnikDryers > Drying ovensBrand > Klein Vakuumtecnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine i ...

General SKU061H261 MakeHeraeus Hanau TypeVTR-5036 No.9004800 Year of construction1990 LocationBarneveld Main Features MaterialAluminium Volume45 Ltr. Max.temp.180 °C Specified Features - Drying oven Vacuum drying oven(1x) Max. temperature180 Degr. C. Number of compartments:1 Capacity45 Ltr Internal diameter340mm Internal depth500mm Electric heatingcheck Electric capacity1,1 KW, 230 Volt Number of doors:1 MaterialAluminium Information With switchcheck Floorspace0,6x0,7 M Total height0,5 MDrying ovensHeraeus HanauDryers > Drying ovensBrand > Heraeus Hanau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0993 MakeVeronesi LocationBarneveld TypeAF2000 Main Features MaterialStainless steel Capacity25000 Ltr./Hr. Motor30 KW Specified Features - Separator Separatorliquid clarification Capacity25000 ltr/h Motor30 kW ATEX Max. rotor speed5106 rpm Inletdia. 85mm Liquid outletdia. 50mm Solids outletdia. 100mm MaterialStainless steel Information No.MA-2058-1 Year of construction2002 Mounted on mild steel framecheck With switchgearcheck Floorspace2,0x2,0 M Total height2,0 M Weight1600 Kg Extra SpecificationsMaterial specification: Disc stack: Incoloy® Alloy 825, :Bowl cover: Inconel® 625 :,Bowl bottom: UNS S32760 :Anti abrasion, :Liner: :Incoloy® Alloy 825, :Movable part: SAF 2205, :Fixed ring: SAF 2205, :Movable ring: :SAF 2205, :Cover: AISI 316L, : :Upper Basin: AISI316L, : :Basin: AISI 316L SeparatorsVeronesiCentrifuges > SeparatorsBrand > ...

General SKU222P196 LocationBarneveld MakeVOLLRATH TypeEWTSV 3 No.17429 Main Features MaterialMild steel Motor2 KW Specified Features - Stirrer MaterialMild steel Stirrercheck Without mixing shaftcheck Motor2,0 KW, 218-242/380-420 Volt Ex With variable speed drivecheck Speed mixing shaft348-1743 rpm Wall mixercheck Adjustable heightcheck Information Year of construction1975 Mounted on framecheck Floorspace1,7x0,6 M Total height0,9 M Weight280 KGStirrersVollrathMixers > StirrersBrand > Vollrath What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU305S482 MakeWaltter Brucks (D) LocationBarneveld TypeVIII G Main Features MaterialStainless steel Motor0.55 KW Inlet diameter635 mm Specified Features - Coating pan MaterialStainless steel Coating pancheck Pan diameter950mm Pan depth580mm In-/Outletdia. 635mm Pan can be tiltedcheck Motor0,55 kW 380/220 Volt Information No.5105 Year of construction1975 With switchcheck Floorspace1,3x1,2 M Total height2,0 M Weight350 KgCoating pansWalter BrucksCoating pans > Coating pansBrand > Walter Brucks What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU358S867 LocationBarneveld MakeGallenkamp TypeOVL 570 010J No.4A 0007 Main Features MaterialAluminium Volume29 Ltr. Max.temp.200 °C Specified Features - Drying oven MaterialAluminium Vacuum drying ovencheck Max. temperature200 degr. C Number of compartments:1 Capacity29 ltr Internal width375 Internal depth300 Internal height260 Electric heatingcheck Electric capacity0,9 kW Number of doors:1 With trays(2x) 355x275x45mm Information Year of constructionunknown With switchcheck Floorspace0,7x0,5 M Total height0,5 M Weight60 KgDrying ovensGallenkamp UkDryers > Drying ovensBrand > Gallenkamp Uk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ma ...

General SKU090W551 MakeBrabender Year of constructionunknown, With electric heating LocationBarneveld Main Features Motor6.5 KW Specified Features - Viscosity test machine Viscosity meterTorque Rheometer (1x) Motor6,8 KW Variable speedcheck Speed± 5-120 Rpm Information Extra Specifications- With 7 interchangable measuring heads DiscountViscosity test machinesBrabenderDiscountPlastic machinery > Viscosity test machinesBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU306M436 LocationBarneveld MakeKusters Venlo No.60193/7 Specified Features - Shredder Shreddercheck Double shaftcheck With hoppercheck Inlet600x400x240mm Outlet150x150mm Motor0,25kW, 230/400Volt, 1380rpm MaterialMild steel, Stainless steel 1.4301 (304) Information Year of construction2006 Mounted on legscheck With switchgearcheck Floorspace1,5 x 0,9m Total height2,1m Weight600kg Extra Specificationsblades are made of mild steelShreddersKusters VenloBreakers > ShreddersBrand > Kusters Venlo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!